21.220 : Flexible drives and transmissions

Items 1 to 200 of 318 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • NBN ISO 11749:2024

    Belt drives — V-ribbed belts for the automotive industry — Fatigue test ISO 11749:2023
    1/25/2024 - PDF - English - NBN
    Learn More
    €121.00

  • PD IEC TS 61156-1-2:2023 + Redline

    Tracked Changes. Multicore and symmetrical pair/quad cables for digital communications Electrical transmission characteristics test methods of
    1/4/2024 - PDF - English - BSI
    Learn More
    €492.00

  • BS ISO 11749:2023 + Redline

    Tracked Changes. Belt drives. V-ribbed belts for the automotive industry. Fatigue test
    1/2/2024 - PDF - English - BSI
    Learn More
    €235.00

  • PD IEC TS 61156-1-2:2023

    Multicore and symmetrical pair/quad cables for digital communications Electrical transmission characteristics test methods of
    12/5/2023 - PDF - English - BSI
    Learn More
    €377.00

  • NF EN 10264-3, A37-604-3 (12/2023)

    Fils et produits tréfilés en acier - Fils en acier pour câbles - Partie 3 : fils ronds et profilés, en acier non allié, pour fortes sollicitations
    12/1/2023 - Paper - French - AFNOR
    Learn More
    €75.67

  • IEC TS 61156-1-2:2023

    IEC TS 61156-1-2:2023 Multicore and symmetrical pair/ quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/ quad cables
    11/29/2023 - PDF - English - IEC
    Learn More
    €397.00

  • BS ISO 11749:2023

    Belt drives. V-ribbed belts for the automotive industry. Fatigue test
    11/14/2023 - PDF - English - BSI
    Learn More
    €180.00

  • NBN ISO 5295:2023

    Synchronous belts — Calculation of power rating and drive centre distance ISO 5295:2023
    10/3/2023 - PDF - English - NBN
    Learn More
    €37.00

  • BS ISO 5295:2023 + Redline

    Tracked Changes. Synchronous belts. Calculation of power rating and drive centre distance
    7/19/2023 - PDF - English - BSI
    Learn More
    €197.00

  • BS ISO 5295:2023

    Synchronous belts. Calculation of power rating and drive centre distance
    7/17/2023 - PDF - English - BSI
    Learn More
    €151.00

  • NBN ISO 255:2023

    Transmissions par courroies — Poulies à gorges pour courroies trapézoïdales (système basé sur la largeur de référence) — Contrôle géométrique des gorges ISO 255:2023
    6/8/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN ISO 255:2023

    Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves ISO 255:2023
    6/8/2023 - PDF - English - NBN
    Learn More
    €58.00

  • BS ISO 19642-12:2023

    Road vehicles. Automotive cables Dimensions and requirements for unscreened twisted pair RF with a specified analogue bandwidth up to 1 GHz
    6/7/2023 - PDF - English - BSI
    Learn More
    €293.00

  • BS ISO 13050:2022 + Redline

    Tracked Changes. Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
    5/30/2023 - PDF - English - BSI
    Learn More
    €454.00

  • NF ISO 255, E24-209 (03/2023)

    Transmissions par courroies - Poulies à gorges pour courroies trapézoïdales (système basé sur la largeur de référence) - Contrôle géométrique des gorges
    3/1/2023 - Paper - French - AFNOR
    Learn More
    €75.67

  • BS ISO 255:2023

    Belt drives. Pulleys for V-belts (system based on datum width). Geometrical inspection of grooves
    2/16/2023 - PDF - English - BSI
    Learn More
    €180.00

  • 23/30447690 DC:2023

    BS ISO 11749. Belt drives. V-ribbed belts for the automotive industry. Fatigue test
    1/19/2023 - PDF - English - BSI
    Learn More
    €24.00

  • NBN ISO 13050:2023

    Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys ISO 13050:2022
    1/18/2023 - PDF - English - NBN
    Learn More
    €184.00

  • NBN ISO 9608:2023

    V-belts and V-ribbed belts — Uniformity of belts — Test method for determination of centre distance variation ISO 9608:2022
    1/18/2023 - PDF - English - NBN
    Learn More
    €37.00

  • UNE-EN 10264-2:2022

    Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications
    7/13/2022 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 10264-2:2022

    Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications
    7/13/2022 - PDF - English - AENOR
    Learn More
    €72.00

  • BS ISO 9608:2022

    V-belts and V-ribbed belts. Uniformity of belts. Test method for determination of centre distance variation
    6/20/2022 - PDF - English - BSI
    Learn More
    €151.00

  • BS ISO 13050:2022

    Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys
    5/26/2022 - PDF - English - BSI
    Learn More
    €348.00

  • DIN 8197:2022-04

    Steel link chains - Reference profiles of hobs for sprockets for roller chains
    4/1/2022 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 8150:2022-03

    Galle chains
    3/1/2022 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 8191:2022-03

    Tooth form for chain sprockets for inverted tooth chains complying with DIN 8190 - Dimensions of profile
    3/1/2022 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 8198:2022-03

    Profiles of tooth space cutters for chain sprockets for roller chains
    3/1/2022 - PDF - German - DIN
    Learn More
    €39.35

  • NF EN 10264-2, A37-604-2 (12/2021)

    Steel wire and wire products - Steel wire for ropes - Part 2 : Cold drawn non alloy steel wire for ropes for general applications
    12/1/2021 - Paper - French - AFNOR
    Learn More
    €75.67

  • BS ISO 9982:2021 + Redline

    Tracked Changes. Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles: dimensions
    10/21/2021 - PDF - English - BSI
    Learn More
    €235.00

  • BS ISO 9982:2021

    Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles: dimensions
    9/9/2021 - PDF - English - BSI
    Learn More
    €180.00

  • NF ISO 19347, E24-305 (01/2021)

    Synchronous belt drives - Imperial pitch trapezoidal profile system - Belts and pulleys
    1/1/2021 - Paper - French - AFNOR
    Learn More
    €86.67

  • NBN ISO 5288:2020

    Synchronous belt drives ? Vocabulary
    11/19/2020 - PDF - French - NBN
    Learn More
    €37.00

  • NBN ISO 5288:2020

    Synchronous belt drives — Vocabulary ISO 5288:2017
    11/19/2020 - PDF - English - NBN
    Learn More
    €37.00

  • NBN ISO 17396:2020

    Synchronous belt drives — Metric pitch — Tooth profiles T and AT endless and open ended belts and pulleys ISO 17396:2017
    11/19/2020 - PDF - English - NBN
    Learn More
    €89.00

  • NBN ISO 155:2020

    Belt drives — Pulleys — Limiting values for adjustment of centres ISO 155:2019
    10/22/2020 - PDF - English - NBN
    Learn More
    €37.00

  • NBN ISO 21342:2020

    Synchronous belt drives — Automotive belts and pulleys ISO 21342:2019
    7/29/2020 - PDF - English - NBN
    Learn More
    €121.00

  • BS ISO 8370-2:1993

    Belt drives. Dynamic test to determine pitch zone location V-ribbed belts
    5/6/2020 - PDF - English - BSI
    Learn More
    €151.00

  • BS ISO 8370-1:1993

    Belt drives. Dynamic test to determine pitch zone location V-belts
    5/5/2020 - PDF - English - BSI
    Learn More
    €151.00

  • BS ISO 22:1991

    Belt drives. Flat transmission belts and corresponding pulleys. Dimensions and tolerances
    5/4/2020 - PDF - English - BSI
    Learn More
    €151.00

  • ASTM A467/A467M-20

    Standard Specification for Machine and Coil Chain
    3/1/2020 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM A467/A467M-20 + Redline

    Standard Specification for Machine and Coil Chain
    3/1/2020 - PDF - English - ASTM
    Learn More
    €53.00

  • BS ISO 5288:2017 + Redline

    Tracked Changes. Synchronous belt drives. Vocabulary
    2/27/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS ISO 17396:2017 + Redline

    Tracked Changes. Synchronous belt drives. Metric pitch. Tooth profiles T and AT endless and open ended belts and pulleys
    2/27/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS ISO 155:2019 + Redline

    Tracked Changes. Belt drives. Pulleys. Limiting values for adjustment of centres
    2/24/2020 - PDF - English - BSI
    Learn More
    €197.00

  • DIN 8164:2019-11

    Bush chains
    11/1/2019 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 71990 Berichtigung 1:2019-06

    Pipes for sheatings of cables for controls, Corrigendum 1
    6/1/2019 - PDF - German - DIN
    Learn More
    €0.00

  • BS ISO 21342:2019

    Synchronous belt drives. Automotive belts and pulleys
    5/3/2019 - PDF - English - BSI
    Learn More
    €250.00

  • DIN 8192:2019-05

    Chain sprockets for roller chains as specified in DIN ISO 606 - Dimensions
    5/1/2019 - PDF - German - DIN
    Learn More
    €79.72

  • BS ISO 155:2019

    Belt drives. Pulleys. Limiting values for adjustment of centres
    3/28/2019 - PDF - English - BSI
    Learn More
    €151.00

  • ISO 155:2019

    Belt drives
    Pulleys
    3/26/2019 - Paper - English - ISO
    Learn More
    €48.00

  • NF ISO 5289, U14-303 (03/2019)

    Agricultural machinery - Endless hexagonal belts and groove sections of corresponding pulleys
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €46.33

  • NF ISO 5288, E24-206 (02/2018)

    Synchronous belt drives - Vocabulary
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €83.85

  • DIN ISO 606:2018-02

    Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets (ISO 606:2015)
    2/1/2018 - PDF - English - DIN
    Learn More
    €137.85

  • DIN ISO 606:2018-02

    Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets (ISO 606:2015)
    2/1/2018 - PDF - German - DIN
    Learn More
    €110.00

  • BS ISO 5288:2017

    Synchronous belt drives. Vocabulary
    1/11/2018 - PDF - English - BSI
    Learn More
    €250.00

  • DIN ISO 4347:2018-01

    Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths (ISO 4347:2015)
    1/1/2018 - PDF - English - DIN
    Learn More
    €99.44

  • DIN ISO 15654:2018-01

    Fatigue test method for transmission precision roller chains and leaf chains (ISO 15654:2015)
    1/1/2018 - PDF - English - DIN
    Learn More
    €157.66

  • DIN ISO 15654:2018-01

    Fatigue test method for transmission precision roller chains and leaf chains (ISO 15654:2015)
    1/1/2018 - PDF - German - DIN
    Learn More
    €126.26

  • DIN ISO 4347:2018-01

    Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths (ISO 4347:2015)
    1/1/2018 - PDF - German - DIN
    Learn More
    €79.72

  • ISO 5288:2017

    Synchronous belt drives
    Vocabulary
    12/19/2017 - Paper - French - ISO
    Learn More
    €48.00

  • BS ISO 17396:2017

    Synchronous belt drives. Metric pitch. Tooth profiles T and AT endless and open ended belts and pulleys
    12/6/2017 - PDF - English - BSI
    Learn More
    €250.00

  • ISO 17396:2017

    Synchronous belt drives
    Metric pitch
    11/24/2017 - Paper - English - ISO
    Learn More
    €110.00

  • 17/30357383 DC:2017

    BS EN 13001-3-2 AMD1. Cranes. General design. Part 3-2. Limit states and proof of competence wire ropes in reeving systems 3-2:
    10/2/2017 - PDF - English - BSI
    Learn More
    €24.00

  • DIN 5881-1:2016-12

    Petroleum industry - Wire ropes and rope reeving - Part 1: Wire ropes
    12/1/2016 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 5881-2:2016-12

    Petroleum industry - Wire ropes and rope reeving - Part 2: Rope reeving
    12/1/2016 - PDF - German - DIN
    Learn More
    €45.98

  • JIS B 1861:2016

    V-belts and V-ribbed belts - Test method for determination of centre distance variation
    10/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1804:2015

    Leaf chains
    12/21/2015 - PDF - Japanese - JSA
    Learn More
    €41.86

  • NF ISO 606, E26-102 (12/2015)

    Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €99.33

  • BS ISO 19347:2015

    Synchronous belt drives. Imperial pitch trapezoidal profile system. Belts and pulleys
    10/31/2015 - PDF - English - BSI
    Learn More
    €293.00

  • DIN EN 13001-3-2:2015-10

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems, German version EN 13001-3-2:2014.
    10/1/2015 - PDF - German - DIN
    Learn More
    €104.95

  • DIN EN 13001-3-2:2015-10

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
    10/1/2015 - PDF - English - DIN
    Learn More
    €131.40

  • BS ISO 9563:2015

    Belt drives. Electrical conductivity of antistatic endless synchronous belts. Characteristics and test method
    9/30/2015 - PDF - English - BSI
    Learn More
    €180.00

  • BS ISO 15654:2015

    Fatigue test method for transmission precision roller chains and leaf chains
    9/30/2015 - PDF - English - BSI
    Learn More
    €348.00

  • BS ISO 4347:2015

    Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
    9/30/2015 - PDF - English - BSI
    Learn More
    €250.00

  • ISO 19347:2015 (R2021)

    Synchronous belt drives
    Imperial pitch trapezoidal profile system
    9/29/2015 - Paper - English - ISO
    Learn More
    €148.00

  • ISO 9563:2015 (R2021)

    Belt drives
    Electrical conductivity of antistatic endless synchronous belts
    9/14/2015 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 9563:2015 (R2021)

    Belt drives
    Electrical conductivity of antistatic endless synchronous belts
    9/14/2015 - Paper - English - ISO
    Learn More
    €48.00

  • ISO 15654:2015 (R2021)

    Fatigue test method for transmission precision roller chains and leaf chains
    General information
    9/9/2015 - Paper - French - ISO
    Learn More
    €199.00

  • ISO 15654:2015 (R2021)

    Fatigue test method for transmission precision roller chains and leaf chains
    General information
    9/9/2015 - Paper - English - ISO
    Learn More
    €199.00

  • ISO 4347:2015 (R2021)

    Leaf chains, clevises and sheaves
    Dimensions, measuring forces, tensile strengths and dynamic strengths
    9/1/2015 - Paper - French - ISO
    Learn More
    €148.00

  • ISO 4347:2015 (R2021)

    Leaf chains, clevises and sheaves
    Dimensions, measuring forces, tensile strengths and dynamic strengths
    9/1/2015 - Paper - English - ISO
    Learn More
    €148.00

  • BS ISO 606:2015

    Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
    8/31/2015 - PDF - English - BSI
    Learn More
    €331.00

  • ISO 606:2015 (R2021)

    Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
    General information
    8/13/2015 - Paper - French - ISO
    Learn More
    €174.00

  • ISO 606:2015 (R2021)

    Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
    General information
    8/13/2015 - Paper - English - ISO
    Learn More
    €174.00

  • JIS B 1857-1:2015

    Curvilinear toothed synchronous belt drive systems for general power transmission - Part 1: Belt
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1857-2:2015

    Curvilinear toothed synchronous belt drive systems for general power transmission - Part 2: Pulley
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €36.27

  • JIS B 1812:2015

    Glossary of terms relating to chains, sprockets and accessories
    3/20/2015 - PDF - Japanese - JSA
    Learn More
    €52.91

  • UNE-EN 13001-3-2:2015 (R2021)

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
    1/14/2015 - PDF - Spanish - AENOR
    Learn More
    €79.00

  • UNE-EN 13001-3-2:2015 (R2021)

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
    1/14/2015 - PDF - English - AENOR
    Learn More
    €94.80

  • BS EN 13001-3-2:2014

    Cranes. General design Limit states and proof of competence wire ropes in reeving systems
    11/30/2014 - PDF - English - BSI
    Learn More
    €293.00

  • NBN EN 13001-3-2:2014

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
    9/26/2014 - PDF - French - NBN
    Learn More
    €163.00

  • NBN EN 13001-3-2:2014

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
    9/26/2014 - PDF - German - NBN
    Learn More
    €163.00

  • NBN EN 13001-3-2:2014

    Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
    9/26/2014 - PDF - English - NBN
    Learn More
    €163.00

  • JIS B 1801:2014

    Short-pitch transmission precision roller chains and bush chains
    9/22/2014 - PDF - Japanese - JSA
    Learn More
    €41.86

  • BS ISO 1813:2014

    Belt drives. V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts. Electrical conductivity of antistatic belts: Characteristics and methods of test
    3/31/2014 - PDF - English - BSI
    Learn More
    €180.00

  • MIL-DTL-83140B:2014 + VN1:2019

    Wire Rope: Stainless Steel, Preformed, Rotation Resistant, for Aircraft Rescue Hoist, Utility Hoist and Winching
    2/19/2014 - PDF - English - DODNAV
    Learn More
    €25.00

  • ISO 1813:2014 (R2019)

    Belt drives
    V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts
    2/10/2014 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 1813:2014 (R2019)

    Belt drives
    V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts
    2/10/2014 - Paper - English - ISO
    Learn More
    €72.00

  • BS ISO 1081:2013

    Belt drives. V-belts and V-ribbed belts, and corresponding grooved pulleys. Vocabulary
    12/31/2013 - PDF - English - BSI
    Learn More
    €293.00

  • BS ISO 5294:2012

    Synchronous belt drives. Pulleys
    1/10/2013 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 9980:2012

    Belt drives. Grooved pulleys for V-belts (system based on effective width). Geometrical inspection of grooves
    11/30/2012 - PDF - English - BSI
    Learn More
    €180.00

  • ISO 9980:2012 (R2023)

    Belt drives
    Grooved pulleys for V-belts (system based on effective width)
    11/5/2012 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 9980:2012 (R2023)

    Belt drives
    Grooved pulleys for V-belts (system based on effective width)
    11/5/2012 - Paper - English - ISO
    Learn More
    €72.00

  • DIN ISO 487:2012-10

    Steel roller chains, types S and C, attachments and sprockets (ISO 487:1998)
    10/1/2012 - PDF - German - DIN
    Learn More
    €79.72

  • DIN ISO 487:2012-10

    Steel roller chains, types S and C, attachments and sprockets (ISO 487:1998)
    10/1/2012 - PDF - English - DIN
    Learn More
    €99.44

  • DIN ISO 1275:2012-07

    Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors (ISO 1275:2006)
    7/1/2012 - PDF - German - DIN
    Learn More
    €85.79

  • DIN ISO 1275:2012-07

    Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors (ISO 1275:2006)
    7/1/2012 - PDF - English - DIN
    Learn More
    €107.48

  • BS ISO 5296:2012

    Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH. Metric and inch dimensions
    6/30/2012 - PDF - English - BSI
    Learn More
    €180.00

  • UNE-EN 10264-1:2012 (R2020)

    Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
    4/18/2012 - PDF - Spanish - AENOR
    Learn More
    €53.00

  • UNE-EN 10264-1:2012 (R2020)

    Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
    4/18/2012 - PDF - English - AENOR
    Learn More
    €63.60

  • BS ISO 12046:2012

    Synchronous belt drives. Automotive belts. Determination of physical properties
    3/31/2012 - PDF - English - BSI
    Learn More
    €180.00

  • SAE J 1646:2012-03-19

    Glossary of Terms - Lubricated Friction Systems (Stabilized: Mar 2012)
    3/19/2012 - PDF - English - SAE
    Learn More
    €109.00

  • ISO 12046:2012 (R2017)

    Synchronous belt drives
    Automotive belts
    3/8/2012 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 12046:2012 (R2017)

    Synchronous belt drives
    Automotive belts
    3/8/2012 - Paper - English - ISO
    Learn More
    €72.00

  • NF EN 10264-4, A37-604-4 (03/2012)

    Steel wire and wire products - Steel wire for ropes - Part 4 : stainless steel wire - Fils et produits tréfilés en acier
    3/1/2012 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF EN 10264-1, A37-604-1 (03/2012)

    Steel wire and wire products - Steel wire for ropes - Part 1 : general requirements - Fils et produits tréfilés en acier
    3/1/2012 - Paper - French - AFNOR
    Learn More
    €48.00

  • NBN EN 10264-1:2012

    Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
    2/24/2012 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 10264-1:2012

    Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
    2/24/2012 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 10264-1:2012

    Steel wire and wire products - Steel wire for ropes - Part 1: General requirements
    2/24/2012 - PDF - English - NBN
    Learn More
    €58.00

  • BS ISO 5291:2011

    Belt drives. Grooved pulleys for joined classical V-belts. Groove sections AJ, BJ, CJ and DJ (effective system)
    1/31/2012 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN 10264-1:2012

    Steel wire and products. for ropes General requirements
    1/31/2012 - PDF - English - BSI
    Learn More
    €151.00

  • BS ISO 254:2011

    Belt drives. Pulleys. Quality, finish and balance
    12/31/2011 - PDF - English - BSI
    Learn More
    €151.00

  • ISO 5291:2011 (R2023)

    Belt drives
    Grooved pulleys for joined classical V-belts
    12/12/2011 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 5291:2011 (R2023)

    Belt drives
    Grooved pulleys for joined classical V-belts
    12/12/2011 - Paper - English - ISO
    Learn More
    €48.00

  • ISO 254:2011 (R2019)

    Belt drives
    Pulleys
    11/7/2011 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 254:2011 (R2019)

    Belt drives
    Pulleys
    11/7/2011 - Paper - English - ISO
    Learn More
    €48.00

  • DIN ISO 13203:2011-02

    Chains, sprockets and accessories - List of equivalent terms (ISO 13203:2005)
    2/1/2011 - PDF - German - DIN
    Learn More
    €92.62

  • DIN ISO 13203:2011-02

    Chains, sprockets and accessories - List of equivalent terms (ISO 13203:2005)
    2/1/2011 - PDF - English - DIN
    Learn More
    €115.98

  • JASO E109:2011

    Automotive parts - V-ribbed pulley grooves and belts - Dimensions
    1/1/2011 - PDF - Japanese - JSAE
    Learn More
    €52.00

  • ASME B29.1-2011 (R2022)

    Precision Power Transmission Roller Chains, Attachments, and Sprockets
    1/1/2011 - PDF DRM - English - ASME
    Learn More
    €37.00

  • ASME B29.100-2011 (R2021)

    Double-Pitch Roller Chains, Attachments, and Sprockets
    1/1/2011 - PDF DRM - English - ASME
    Learn More
    €105.00

  • JIS B 1859:2009 (R2014)

    Synchronous belt drives - Vocabulary
    9/24/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1456/AMENDMENT 1:2009 (R2013)

    Roller chain shaft couplings (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN ISO 10823 Berichtigung 1:2009-01

    Guidelines for the selection of roller chain drives (ISO 10823:2004), Corrigendum to DIN ISO 10823:2006-10 (ISO 10823:2004/Cor. 1:2008)
    1/1/2009 - PDF - German - DIN
    Learn More
    €0.00

  • DIN ISO 10823 Berichtigung 1:2009-01

    Guidelines for the selection of roller chain drives (ISO 10823:2004), Corrigendum 1 to English version of DIN ISO 10823:2006-10
    1/1/2009 - PDF - English - DIN
    Learn More
    €0.00

  • NF EN 12385-1/IN1, A47-205-1/IN1 (12/2008)

    Steel wire ropes - Safety - Part 1 : general requirements - Câbles en acier
    12/1/2008 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN 12385-1+A1, A47-205-1 (12/2008)

    Steel wire ropes - Safety - Part 1 : general requirements - Câbles en acier
    12/1/2008 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN 12385-2/IN1, A47-205-2/IN1 (05/2008)

    Steel wire ropes - Safety - Part 2 : definitions, designation and classification - Câbles en acier
    5/1/2008 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN 12385-2+A1, A47-205-2 (05/2008)

    Steel wire ropes - Safety - Part 2 : definitions, designation and classification - Câbles en acier
    5/1/2008 - Paper - French - AFNOR
    Learn More
    €154.67

  • JIS K 6323:2008 (R2017)

    Classical V-belts for power transmission
    3/20/2008 - PDF - Japanese - JSA
    Learn More
    €41.86

  • DIN 22253:2008-03

    Chain connectors - Shackle type connectors - Dimensions, requirements, testing
    3/1/2008 - PDF - German - DIN
    Learn More
    €79.72

  • ISO 10823:2004/Cor 1:2008

    Guidelines for the selection of roller chain drives
    Technical Corrigendum 1
    2/5/2008 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 10823:2004/Cor 1:2008

    Guidelines for the selection of roller chain drives
    Technical Corrigendum 1
    2/5/2008 - Paper - French - ISO
    Learn More
    €0.00

  • NF R15-505-2 (05/2007) (R2012)

    Belt drives - V-belts, V-ribbed belts or synchronous belts for the automotive industry - Part 2 : determination of tensile strength at break - Transmissions par courroies
    5/1/2007 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF E24-403 (05/2007) (R2012)

    Belt drives - V-ribbed belts - Determination of linear density - Transmissions par courroies
    5/1/2007 - Paper - French - AFNOR
    Learn More
    €25.67

  • DIN ISO 10823:2006-10

    Guidelines for the selection of roller chain drives (ISO 10823:2004)
    10/1/2006 - PDF - German - DIN
    Learn More
    €79.72

  • DIN ISO 10823:2006-10

    Guidelines for the selection of roller chain drives (ISO 10823:2004)
    10/1/2006 - PDF - English - DIN
    Learn More
    €99.44

  • BS 3790:2006

    Specification for belt drives. Endless wedge belts, endless V-belts, banded wedge belts, banded V-belts and their corresponding pulleys
    9/29/2006 - PDF - English - BSI
    Learn More
    €293.00

  • BS ISO 1275:2006

    Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
    7/31/2006 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 13203:2006

    Chains, sprockets and accessories. List of equivalent terms
    1/31/2006 - PDF - English - BSI
    Learn More
    €293.00

  • JIS B 1858:2005 (R2015)

    Belt drives - Pulleys and V-ribbed belts for industrial applications
    7/20/2005 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 8157:2005-02

    Draw bench chains with bushes
    2/1/2005 - PDF - German - DIN
    Learn More
    €32.34

  • DIN 8156:2005-02

    Draw bench chains without bushes
    2/1/2005 - PDF - German - DIN
    Learn More
    €32.34

  • ISO 10823:2004 (R2018)

    Guidelines for the selection of roller chain drives
    General information
    2/2/2004 - Paper - French - ISO
    Learn More
    €148.00

  • ISO 10823:2004 (R2018)

    Guidelines for the selection of roller chain drives
    General information
    2/2/2004 - Paper - English - ISO
    Learn More
    €148.00

  • BS ISO 8419:2003

    Belt drives. Narrow V-belts. Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
    2/12/2003 - PDF - English - BSI
    Learn More
    €151.00

  • ISO 8419:2003 (R2023)

    Belt drives
    Narrow V-belts
    1/30/2003 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 8419:2003 (R2023)

    Belt drives
    Narrow V-belts
    1/30/2003 - Paper - English - ISO
    Learn More
    €72.00

  • BS ISO 6971:2002

    Cranked-link drag chains of welded construction, attachments and sprockets
    10/11/2002 - PDF - English - BSI
    Learn More
    €180.00

  • BS ISO 6972:2002

    Cranked-link mill chains of welded construction, attachments and sprockets
    10/11/2002 - PDF - English - BSI
    Learn More
    €250.00

  • ISO 6971:2002 (R2018)

    Cranked-link drag chains of welded construction, attachments and sprockets
    General information
    10/3/2002 - Paper - French - ISO
    Learn More
    €110.00

  • ISO 6972:2002 (R2018)

    Cranked-link mill chains of welded construction, attachments and sprockets
    General information
    10/3/2002 - Paper - French - ISO
    Learn More
    €110.00

  • ISO 6971:2002 (R2018)

    Cranked-link drag chains of welded construction, attachments and sprockets
    General information
    10/3/2002 - Paper - English - ISO
    Learn More
    €110.00

  • ISO 6972:2002 (R2018)

    Cranked-link mill chains of welded construction, attachments and sprockets
    General information
    10/3/2002 - Paper - English - ISO
    Learn More
    €110.00

  • BS ISO 5290:2001

    Belt drives. Grooved pulleys for narrow V-belts. Groove sections 9N/J, 15N/J and 25N/J (effective system)
    10/25/2001 - PDF - English - BSI
    Learn More
    €180.00

  • BS ISO 9633:2001

    Cycle chains. Characteristics and test methods
    9/15/2001 - PDF - English - BSI
    Learn More
    €180.00

  • ISO 5290:2001 (R2021)

    Belt drives
    Grooved pulleys for joined narrow V-belts
    9/6/2001 - Paper - French - ISO
    Learn More
    €72.00

  • ISO 5290:2001 (R2021)

    Belt drives
    Grooved pulleys for joined narrow V-belts
    9/6/2001 - Paper - English - ISO
    Learn More
    €72.00

  • JASO E107:2001

    Automotive - V-belts and corresponding V-pulley grooves - Shape and dimensions
    3/28/2001 - - - JSAE
    Learn More
    €52.00

  • JASO E110:2000

    Test methods of automotive synchronous belts
    3/27/2000 - - - JSAE
    Learn More
    €52.00

  • DIN 8182:1999-09

    Cranked link chains
    9/1/1999 - PDF - German - DIN
    Learn More
    €22.99

  • DIN 8182:1999-09

    Cranked-link roller chains (rotary chains)
    9/1/1999 - PDF - English - DIN
    Learn More
    €28.60

  • JASO E105:1999

    Automotive parts - Synchronous belts
    3/25/1999 - - - JSAE
    Learn More
    €52.00

  • JASO E106:1999

    Automotive parts - Synchronous pulleys
    3/25/1999 - - - JSAE
    Learn More
    €52.00

  • JIS K 6368:1999 (R2013)

    Narrow V belts for power transmission
    1/20/1999 - PDF - Japanese - JSA
    Learn More
    €36.27

  • NF ISO 487, E26-105 (10/1998)

    Steel roller chains, types S and C, attachments and sprockets.
    10/1/1998 - Paper - French - AFNOR
    Learn More
    €99.00

  • BS ISO 487:1998

    Steel roller chains, types S and C, attachments and sprockets
    9/15/1998 - PDF - English - BSI
    Learn More
    €250.00

  • DIN 2215:1998-08

    Endless V-belts - Classical V-belts - Dimensions
    8/1/1998 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 2215:1998-08

    Endless V-belts - Classical V-belts - Dimensions
    8/1/1998 - PDF - English - DIN
    Learn More
    €49.16

  • ISO 487:1998 (R2020)

    Steel roller chains, types S and C, attachments and sprockets
    General information
    7/9/1998 - Paper - French - ISO
    Learn More
    €110.00

  • ISO 487:1998 (R2020)

    Steel roller chains, types S and C, attachments and sprockets
    General information
    7/9/1998 - Paper - English - ISO
    Learn More
    €110.00

  • VDI/VDE 3684:1997-09

    Manufacturer-independent configuration of drive systems - Description of event-driven motion processes with functional diagrams
    9/1/1997 - PDF - German - VDI
    Learn More
    €68.50

  • ISO 4183:1995

    Belt drives
    Classical and narrow V-belts
    6/22/1995 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 4183:1995

    Belt drives
    Classical and narrow V-belts
    6/22/1995 - Paper - English - ISO
    Learn More
    €48.00

  • UNE 18007:1994

    BELT DRIVES. FLAT TRANSMISSION BELTS AND CORRESPONDING PULLEYS. DIMENSIONS AND TOLERANCES.
    4/24/1994 - PDF - Spanish - AENOR
    Learn More
    €39.00

  • ISO 8370-1:1993 (R2020)

    Belt drives
    Dynamic test to determine pitch zone location
    10/7/1993 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 8370-2:1993 (R2020)

    Belt drives
    Dynamic test to determine pitch zone location
    10/7/1993 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 8370-1:1993 (R2020)

    Belt drives
    Dynamic test to determine pitch zone location
    10/7/1993 - Paper - English - ISO
    Learn More
    €48.00

  • ISO 8370-2:1993 (R2020)

    Belt drives
    Dynamic test to determine pitch zone location
    10/7/1993 - Paper - English - ISO
    Learn More
    €48.00

  • NF ISO 4184, E24-212 (08/1993)

    Belt drives. Classical and narrow V-belts. Lengths in datum system. - Transmissions par courroies
    8/1/1993 - Paper - French - AFNOR
    Learn More
    €60.67

  • VDI 2758:1993-06 (R2015)

    Belt drives
    6/1/1993 - PDF - German - VDI
    Learn More
    €107.75

  • UNE 18006:1993

    INDUSTRIAL V-BELTS DRIVES. DIMENSIONS.
    3/24/1993 - PDF - Spanish - AENOR
    Learn More
    €27.00

  • UNE 18086:1993

    INDUSTRIAL V-BELTS DRIVES. GEOMETRICAL INSPECTION.
    3/24/1993 - PDF - Spanish - AENOR
    Learn More
    €17.00

  • ISO 4184:1992 (R1995)

    Belt drives
    Classical and narrow V-belts
    12/17/1992 - Paper - French - ISO
    Learn More
    €48.00

  • ISO 4184:1992 (R1995)

    Belt drives
    Classical and narrow V-belts
    12/17/1992 - Paper - English - ISO
    Learn More
    €48.00

  • NBN E 24-013:1992

    Synchronous belt drives - Pulleys
    12/2/1992 - PDF - French - NBN
    Learn More
    €58.00

  • NBN E 24-013:1992

    Synchronous belt drives - Pulleys
    12/2/1992 - PDF - Dutch - NBN
    Learn More
    €58.00

  • NBN E 24-015:1992

    Synchronous belt drives - Calculation of power rating and drive centre distance
    12/2/1992 - PDF - French - NBN
    Learn More
    €37.00

  • NBN E 24-015:1992

    Synchronous belt drives - Calculation of power rating and drive centre distance
    12/2/1992 - PDF - Dutch - NBN
    Learn More
    €37.00

  • NBN E 24-012:1992

    Synchronous belt drives - Belts
    12/1/1992 - PDF - French - NBN
    Learn More
    €58.00

Items 1 to 200 of 318 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2