21.200 : Gears
-
PD ISO/TS 6336-20:2022 + Redline
Tracked Changes. Calculation of load capacity spur and helical gears scuffing capacity. Flash temperature method
1/8/2024 - PDF - English -
Learn More€382.00 -
PD ISO/TR 6336-30:2022 + Redline
Tracked Changes. Calculation of load capacity spur and helical gears examples for the application ISO 6336 parts 1,2,3,5
1/4/2024 - PDF - English -
Learn More€492.00 -
BS ISO 10300-2:2023 + Redline
Tracked Changes. Calculation of load capacity bevel gears surface durability (macropitting)
12/22/2023 - PDF - English -
Learn More€380.00 -
BS ISO 10300-1:2023 + Redline
Tracked Changes. Calculation of load capacity bevel gears Introduction and general influence factors
12/22/2023 - PDF - English -
Learn More€452.00 -
NBN ISO 10300-1:2023
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors ISO 10300-1:2023
12/19/2023 - PDF - English -
Learn More€184.00 -
NBN ISO 10300-3:2023
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength ISO 10300-3:2023
12/19/2023 - PDF - English -
Learn More€163.00 -
NBN ISO 10300-2:2023
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting) ISO 10300-2:2023
12/19/2023 - PDF - English -
Learn More€163.00 -
NBN ISO 14635-2:2023
Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils ISO 14635-2:2023
10/10/2023 - PDF - English -
Learn More€121.00 -
NBN ISO 14635-3:2023
Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases ISO 14635-3:2023
10/10/2023 - PDF - English -
Learn More€121.00 -
NBN ISO 14635-1:2023
Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils ISO 14635-1:2023
10/10/2023 - PDF - English -
Learn More€89.00 -
BS ISO 10300-3:2023 + Redline
Tracked Changes. Calculation of load capacity bevel gears Part 3: tooth root strength
9/11/2023 - PDF - English -
Learn More€432.00 -
€331.00 -
BS ISO 10300-1:2023
Calculation of load capacity bevel gears Introduction and general influence factors
8/31/2023 - PDF - English -
Learn More€348.00 -
BS ISO 10300-2:2023
Calculation of load capacity bevel gears surface durability (macropitting)
8/25/2023 - PDF - English -
Learn More€293.00 -
€83.00 -
BS ISO 14635-2:2023 + Redline
Tracked Changes. Gears. FZG test procedures step load A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
7/20/2023 - PDF - English -
Learn More€326.00 -
BS ISO 10825-1:2022
Gears. Wear and damage to gear teeth Nomenclature characteristics
7/19/2023 - PDF - English -
Learn More€377.00 -
BS ISO 14635-1:2023 + Redline
Tracked Changes. Gears. FZG test procedures method A/8,3/90 for relative scuffing load-carrying capacity of oils
7/19/2023 - PDF - English -
Learn More€326.00 -
PD ISO/TR 10825-2:2022
Gears. Wear and damage to gear teeth Supplementary information
7/19/2023 - PDF - English -
Learn More€348.00 -
BS ISO 14635-3:2023
Gears. FZG test procedures method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
7/17/2023 - PDF - English -
Learn More€250.00 -
BS ISO 14635-2:2023
Gears. FZG test procedures step load A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
7/14/2023 - PDF - English -
Learn More€250.00 -
BS ISO 14635-1:2023
Gears. FZG test procedures method A/8,3/90 for relative scuffing load-carrying capacity of oils
7/14/2023 - PDF - English -
Learn More€250.00 -
€65.89 -
FD ISO/TR 6336-30, E23-030-30 (03/2023)
Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 30 : exemples d'application de l'ISO 6336 parties 1,2,3,5
3/1/2023 - Paper - French -
Learn More€144.67 -
NBN ISO 10825-1:2023
Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics ISO 10825-1:2022
2/6/2023 - PDF - English -
Learn More€184.00 -
NBN ISO 10825-1:2023
Engrenages — Usure et défauts des dentures — Partie 1: Nomenclature et caractéristiques ISO 10825-1:2022
2/6/2023 - PDF - French -
Learn More€184.00 -
PD ISO/TR 6336-30:2022
Calculation of load capacity spur and helical gears examples for the application ISO 6336 parts 1,2,3,5
12/19/2022 - PDF - English -
Learn More€377.00 -
FD ISO/TR 10825-2, E23-014-2 (12/2022)
Engrenages - Usure et défauts des dentures - Partie 2 : Informations supplémentaires
12/1/2022 - Paper - French -
Learn More€130.67 -
PD ISO/TS 6336-20:2022
Calculation of load capacity spur and helical gears scuffing capacity. Flash temperature method
10/31/2022 - PDF - English -
Learn More€293.00 -
PD ISO/TS 6336-21:2022
Calculation of load capacity spur and helical gears Part 21: scuffing — Integral temperature method
10/31/2022 - PDF - English -
Learn More€293.00 -
XP ISO/TS 6336-20, E23-030-20 (07/2022)
Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 20 : Calcul de la capacité de charge au grippage - Méthode de la température-éclair
7/1/2022 - Paper - French -
Learn More€108.33 -
XP ISO TS 6336-21, E23-030-21 (07/2022)
Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 21 : Calcul de la capacité de charge au grippage - Méthode de la température intégrale
7/1/2022 - Paper - French -
Learn More€108.33 -
NF ISO 10825-1, E23-014-1 (07/2022)
Engrenages - Usure et défauts des dentures - Partie 1 : Nomenclature et caractéristiques
7/1/2022 - Paper - French -
Learn More€154.50 -
DIN ISO 1328-2:2021-09
Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations (ISO 1328-2:2020)
9/1/2021 - PDF - German -
Learn More€99.35 -
NBN ISO 14104:2021
Gears ? Surface temper etch inspection after grinding, chemical method
6/8/2021 - PDF - French -
Learn More€89.00 -
NBN ISO 6336-1:2021
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors ISO 6336-1:2019
6/8/2021 - PDF - English -
Learn More€205.00 -
NBN ISO 6336-5:2021
Calculation of load capacity of spur and helical gears ? Part 5: Strength and quality of materials
6/8/2021 - PDF - French -
Learn More€163.00 -
NBN ISO 1328-2:2021
Cylindrical gears ? ISO system of flank tolerance classification ? Part 2: Definitions and allowable values of double flank radial composite deviations
6/8/2021 - PDF - French -
Learn More€121.00 -
€205.00
-
NBN ISO 6336-3:2021
Calculation of load capacity of spur and helical gears ? Part 3: Calculation of tooth bending strength
6/8/2021 - PDF - French -
Learn More€184.00 -
NBN ISO 6336-6:2021
Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load ISO 6336-6:2019
6/8/2021 - PDF - English -
Learn More€163.00 -
NBN ISO 14104:2021
Gears — Surface temper etch inspection after grinding, chemical method ISO 14104:2017
6/8/2021 - PDF - English -
Learn More€89.00 -
NBN ISO 6336-2:2021
Calculation of load capacity of spur and helical gears ? Part 2: Calculation of surface durability (pitting)
6/8/2021 - PDF - French -
Learn More€163.00 -
NBN ISO 6336-5:2021
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials ISO 6336-5:2016
6/8/2021 - PDF - English -
Learn More€163.00 -
NBN ISO 1328-2:2021
Cylindrical gears — ISO system of flank tolerance classification — Part 2: Definitions and allowable values of double flank radial composite deviations ISO 1328-2:2020
6/8/2021 - PDF - English -
Learn More€121.00 -
NBN ISO 6336-1:2021
Calculation of load capacity of spur and helical gears ? Part 1: Basic principles, introduction and general influence factors
6/8/2021 - PDF - French -
Learn More€205.00 -
NBN ISO 6336-3:2021
Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength ISO 6336-3:2019
6/8/2021 - PDF - English -
Learn More€184.00 -
€205.00
-
NBN ISO 6336-2:2021
Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) ISO 6336-2:2019
6/8/2021 - PDF - English -
Learn More€163.00 -
NBN ISO 6336-6:2021
Calculation of load capacity of spur and helical gears ? Part 6: Calculation of service life under variable load
6/8/2021 - PDF - French -
Learn More€163.00 -
€163.00
-
PD ISO/TR 10300-32:2021
Calculation of load capacity bevel gears ISO rating system for and hypoid gears. Sample calculation scuffing
4/22/2021 - PDF - English -
Learn More€449.00 -
PD ISO/TS 10300-20:2021
Calculation of load capacity bevel gears scuffing capacity. Flash temperature method
4/20/2021 - PDF - English -
Learn More€250.00 -
BS ISO 6336-3:2019
Calculation of load capacity spur and helical gears tooth bending strength
12/15/2020 - PDF - English -
Learn More€348.00 -
BS ISO 6336-2:2019
Calculation of load capacity spur and helical gears surface durability (pitting)
12/14/2020 - PDF - English -
Learn More€331.00 -
BS ISO 1328-2:2020 + Redline
Tracked Changes. Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values double radial composite deviations
11/12/2020 - PDF - English -
Learn More€326.00 -
€331.00 -
ASTM E2905/E2905M-20
Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—,Electromagnetic Methods
7/1/2020 - PDF - English -
Learn More€57.00 -
NF ISO 1328-2, E23-007-2 (07/2020)
Cylindrical gears - ISO system of flank tolerance classification - Part 2 : definitions and allowable values of double flank radial composite deviations - Engrenages cylindriques - Système ISO de classification des tolérances sur flancs - Partie 2 : définitions et valeurs admissibles des écarts composés radiaux
7/1/2020 - Paper - French -
Learn More€86.67 -
ASTM E2905/E2905M-20 + Redline
Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—,Electromagnetic Methods
7/1/2020 - PDF - English -
Learn More€68.00 -
€154.50
-
€377.00 -
DIN 3990-16:2020-05
Calculation of load capacity of cylindrical gears - Part 16: Determination of the micro-pitting load-carrying capacity of lubricants using FZG-test-method GT-C/8,3/90
5/1/2020 - PDF - German -
Learn More€136.82 -
NF ISO 6336-3, E23-030-3 (04/2020)
Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength - Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 3 : calcul de la résistance à la flexion en pied de dent
4/1/2020 - Paper - French -
Learn More€130.67 -
NF ISO 6336-1, E23-030-1 (04/2020)
Calculation of load capacity of spur and helical gears - Part 1 : basic principles, introduction and general influence factors
4/1/2020 - Paper - French -
Learn More€192.00 -
NF ISO 6336-6, E23-030-6 (04/2020)
Calculation of load capacity of spur and helical gears - Part 6 : calculation of service life under variable load
4/1/2020 - Paper - French -
Learn More€108.33 -
NF ISO 6336-2, E23-030-2 (04/2020)
Calculation of load capacity of spur and helical gears - Part 2 : calculation of surface durability (pitting) - Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 2 : calcul de la résistance à la pression de contact (piqûres)
4/1/2020 - Paper - French -
Learn More€108.33 -
BS ISO 1328-2:2020
Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values double radial composite deviations
3/4/2020 - PDF - English -
Learn More€250.00 -
PD ISO/TS 6336-22:2018 + Redline
Tracked Changes. Calculation of load capacity spur and helical gears micropitting
2/27/2020 - PDF - English -
Learn More€432.00 -
PD ISO/TR 6336-31:2018 + Redline
Tracked Changes. Calculation of load capacity spur and helical gears examples micropitting
2/27/2020 - PDF - English -
Learn More€454.00 -
€586.00
-
PD ISO/TR 10828:2015 + Redline
Tracked Changes. Worm gears. Worm profiles and gear mesh geometry
2/26/2020 - PDF - English -
Learn More€518.00 -
BS ISO 6336-5:2016 + Redline
Tracked Changes. Calculation of load capacity spur and helical gears Strength quality materials
2/25/2020 - PDF - English -
Learn More€454.00 -
FD ISO/TR 10064-1, E23-008-1 (02/2020)
Code of inspection practice - Part 1 : measurement of cylindrical gear tooth flanks
2/1/2020 - Paper - French -
Learn More€167.33 -
€86.00
-
ASTM D5182-19 + Redline
Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
12/1/2019 - PDF - English -
Learn More€61.00 -
ASTM D5182-19
Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
12/1/2019 - PDF - English -
Learn More€51.00 -
BS ISO 6336-1:2019
Calculation of load capacity spur and helical gears Basic principles, introduction general influence factors
11/29/2019 - PDF - English -
Learn More€449.00 -
BS ISO 6336-6:2019
Calculation of load capacity spur and helical gears service life under variable
11/28/2019 - PDF - English -
Learn More€331.00 -
€121.00
-
€121.00
-
€121.00
-
PD ISO/TR 10064-1:2019
Code of inspection practice Measurement cylindrical gear tooth flanks
10/3/2019 - PDF - English -
Learn More€377.00 -
DIN 3996:2019-09
Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes
9/1/2019 - PDF - German -
Learn More€148.04 -
PD ISO/TS 6336-4:2019
Calculation of load capacity spur and helical gears tooth flank fracture
8/23/2019 - PDF - English -
Learn More€293.00 -
FD ISO/TR 6336-31, E23-030-31 (02/2019)
Calculation of load capacity of spur and helical gears - Part 31 : calculation examples of micropitting load capacity
2/1/2019 - Paper - French -
Learn More€119.00 -
ISO/TS 6336-4:2019 (R2022)
Calculation of load capacity of spur and helical gears
Part 4: Calculation of tooth flank fracture load capacity
1/30/2019 - Paper - English -
Learn More€174.00 -
XP ISO/TS 6336-22, E23-033-22 (01/2019)
Calculation of load capacity of spur and helical gears - Part 22 : calculation of micropitting load capacity
1/1/2019 - Paper - French -
Learn More€108.00 -
PD ISO/TR 6336-31:2018
Calculation of load capacity spur and helical gears examples micropitting
9/27/2018 - PDF - English -
Learn More€348.00 -
ISO/TR 6336-31:2018
Calculation of load capacity of spur and helical gears
Part 31: Calculation examples of micropitting load capacity
9/26/2018 - Paper - English -
Learn More€199.00 -
ISO/TR 6336-31:2018
Calculation of load capacity of spur and helical gears
Part 31: Calculation examples of micropitting load capacity
9/26/2018 - Paper - French -
Learn More€199.00 -
PD ISO/TS 6336-22:2018
Calculation of load capacity spur and helical gears micropitting
8/31/2018 - PDF - English -
Learn More€331.00 -
ISO/TS 6336-22:2018 (R2021)
Calculation of load capacity of spur and helical gears
Part 22: Calculation of micropitting load capacity
8/29/2018 - Paper - English -
Learn More€199.00 -
ISO/TS 6336-22:2018 (R2021)
Calculation of load capacity of spur and helical gears
Part 22: Calculation of micropitting load capacity
8/29/2018 - Paper - French -
Learn More€199.00 -
DIN ISO 1328-1:2018-03
Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth (ISO 1328-1:2013)
3/1/2018 - PDF - English -
Learn More€170.93 -
DIN ISO 1328-1:2018-03
Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth (ISO 1328-1:2013).
3/1/2018 - PDF - German -
Learn More€136.82 -
PD ISO/TR 10300-30:2017
Calculation of load capacity bevel gears ISO rating system for and hypoid gears. Sample calculations
1/5/2018 - PDF - English -
Learn More€449.00 -
DIN 3966-3:2018-01
Worms and worm wheel - Part 3: Information to be given to the manufacturer by the purchaser in order to obtain the gear required
1/1/2018 - PDF - German -
Learn More€65.89 -
SAE J 1619:2017-12-20
Single Tooth Gear Bending Fatigue Test (Stabilized: Dec 2017)
12/20/2017 - PDF - English -
Learn More€111.00 -
ISO/TR 10300-30:2017
Calculation of load capacity of bevel gears
Part 30: ISO rating system for bevel and hypoid gears
12/12/2017 - Paper - English -
Learn More€248.00 -
DIN 3975-1:2017-09
Definitions and parameters on cylindrical worm gear pairs with rectangular crossing shafts - Part 1: Worm and worm wheel
9/1/2017 - PDF - German -
Learn More€99.35 -
NF ISO 14104, E23-034 (06/2017)
Gears - Surface temper etch inspection after grinding, chemical method
6/1/2017 - Paper - French -
Learn More€75.67 -
JIS B 1756:2017
Gears - Surface temper etch inspection after grinding, chemical method
5/22/2017 - PDF - Japanese -
Learn More€36.27 -
JIS B 1701-2:2017
Cylindrical gears for general engineering and for heavy engineering - Part 2: Module
5/22/2017 - PDF - Japanese -
Learn More€25.00 -
GB/T 9160.1-2017
Rolling bearings―Accessories―Part 2:Locknuts and locking devices (English Version)
5/12/2017 - PDF - English -
Learn More€286.00 -
GB/T 9160.1-2017
Rolling bearings - Accessories - Part 1: Tapered sleeves (English Version)
5/12/2017 - PDF - English -
Learn More€572.00 -
BS ISO 14104:2017
Gears. Surface temper etch inspection after grinding, chemical method
4/25/2017 - PDF - English -
Learn More€250.00 -
ISO 14104:2017 (R2022)
Gears
Surface temper etch inspection after grinding, chemical method
4/4/2017 - Paper - English -
Learn More€110.00 -
ISO 14104:2017 (R2022)
Gears
Surface temper etch inspection after grinding, chemical method
4/4/2017 - Paper - French -
Learn More€110.00 -
€185.58
-
NF ISO 6336-5, E23-030-5 (02/2017)
Calculation of load capacity of spur and helical gears - Part 5 : strength and quality of materials
2/1/2017 - Paper - French -
Learn More€119.00 -
€449.00
-
€41.86
-
€248.00
-
€248.00
-
VG 85540:2016-11
Bevel gears for remote controls, Text in German and English
11/1/2016 - PDF - English, German -
Learn More€52.90 -
BS ISO 6336-5:2016
Calculation of load capacity spur and helical gears Strength quality materials
8/31/2016 - PDF - English -
Learn More€348.00 -
ISO 6336-5:2016 (R2022)
Calculation of load capacity of spur and helical gears
Part 5: Strength and quality of materials
8/4/2016 - Paper - French -
Learn More€199.00 -
ISO 6336-5:2016 (R2022)
Calculation of load capacity of spur and helical gears
Part 5: Strength and quality of materials
8/4/2016 - Paper - English -
Learn More€199.00 -
€185.67
-
JIS B 1702-1:2016 (R2021)
Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
4/20/2016 - PDF - English -
Learn More€124.00 -
JIS B 1760-1:2016
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
4/20/2016 - PDF - Japanese -
Learn More€25.00 -
JIS B 1702-1:2016
Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
4/20/2016 - PDF - Japanese -
Learn More€46.02 -
BS ISO 1122-2:1999
Vocabulary of gear terms Definitions related to worm geometry
9/30/2015 - PDF - English -
Learn More€250.00 -
€398.00
-
€248.00
-
€248.00
-
€62.66
-
€25.00
-
DIN ISO 21771:2014-08
Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007)
8/1/2014 - PDF - English -
Learn More€224.67 -
DIN 21773:2014-08
Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness
8/1/2014 - PDF - German -
Learn More€85.79 -
DIN ISO 21771:2014-08
Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007)
8/1/2014 - PDF - German -
Learn More€179.72 -
€25.00
-
JIS B 1753:2013
Acceptance code for gear units - Test code for airborne sound
11/20/2013 - PDF - Japanese -
Learn More€52.91 -
€25.00
-
NF ISO 1328-1, E23-007-1 (11/2013)
Cylindrical gears - ISO system of flank tolerance classification - Part 1 : definitions and allowable values of deviations relevant to flanks of gear teeth - Engrenages cylindriques
11/1/2013 - Paper - French -
Learn More€130.67 -
BS ISO 1328-1:2013
Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values deviations relevant to flanks gear teeth
9/30/2013 - PDF - English -
Learn More€348.00 -
ISO 1328-1:2013 (R2019)
Cylindrical gears
ISO system of flank tolerance classification
8/20/2013 - Paper - French -
Learn More€199.00 -
ISO 1328-1:2013 (R2019)
Cylindrical gears
ISO system of flank tolerance classification
8/20/2013 - Paper - English -
Learn More€199.00 -
JIS B 1759:2013
Estimation of tooth bending strength of cylindrical plastic gears
6/20/2013 - PDF - Japanese -
Learn More€36.27 -
JIS B 0102-1:2013
Vocabulary of gear terms - Part 1: Definitions related to geometry
5/20/2013 - PDF - Japanese -
Learn More€58.50 -
JIS B 0102-2:2013
Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
5/20/2013 - PDF - Japanese -
Learn More€36.27 -
€449.00 -
NF EN 61400-4, C57-700-4 (03/2013)
Wind turbines - Part 4 : design requirements for wind turbine gearboxes
3/1/2013 - Paper - French -
Learn More€254.50 -
JIS B 1757-4:2013 (R2017)
Evaluation of instruments for the measurement of individual gears - Part 4: Pitch measurement using sphere artifacts
2/20/2013 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
JIS B 1757-3:2013 (R2017)
Evaluation of instruments for the measurement of individual gears - Part 3: Helix measurement using plane artifacts
2/20/2013 - PDF - Japanese -
Learn More€46.02 -
€25.00
-
€25.00
-
JIS B 1701-1:2012 (R2016)
Cylindrical gears for general and heavy engineering - Part 1: Standard basic rack tooth profile
1/20/2012 - PDF - Japanese -
Learn More€25.00 -
JIS B 1757-1:2012 (R2016)
Evaluation of instruments for the measurement of individual gears - Part 1: Method by gear shape artifacts
1/20/2012 - PDF - Japanese -
Learn More€25.00 -
DIN 4000-144:2011-09
Tabular layouts of properties - Part 144: Master gears and truing gears for involute teeth
9/1/2011 - PDF - German -
Learn More€72.80 -
DIN ISO 14635-3:2011-08
Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
8/1/2011 - PDF - English -
Learn More€107.48 -
DIN ISO 14635-3:2011-08
Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
8/1/2011 - PDF - German -
Learn More€85.79 -
€60.00
-
€331.00 -
€199.00
-
DIN 4000-140:2011-02
Tabular layouts of properties - Part 140: Toothing system data of work pieces
2/1/2011 - PDF - German -
Learn More€85.79 -
€377.00 -
FD ISO/TR 10064-6, E23-008-6 (10/2010)
Code of inspection practice - Part 6 : bevel gear measurement methods
10/1/2010 - Paper - French -
Learn More€108.00 -
JIS B 1757-2:2010 (R2015)
Evaluation of instruments for the measurement of individual gears - Part 2: Tooth form measurement using sphere or cylinder artifacts
9/21/2010 - PDF - Japanese -
Learn More€46.02 -
DIN 3970:2010-04
Master gears for checking cylindrical gears - Gear blanks and gearing
4/1/2010 - PDF - German -
Learn More€79.72 -
DIN 3970:2010-04
Master gears for checking cylindrical gears - Gear blanks and gearing
4/1/2010 - PDF - English -
Learn More€99.44 -
€25.00
-
FD E23-041 (03/2010)
Gears - Specification for the on site inspection of gearing assembly when start up open gears for mills, kilns, dryers and coolers - Engrenages
3/1/2010 - Paper - French -
Learn More€60.67 -
DIN ISO 14635-2:2010-01
Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004)
1/1/2010 - PDF - English -
Learn More€99.44 -
DIN ISO 14635-2:2010-01
Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004)
1/1/2010 - PDF - German -
Learn More€79.72 -
DIN ISO 18653:2009-12
Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
12/1/2009 - PDF - English -
Learn More€99.44 -
DIN ISO 18653:2009-12
Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
12/1/2009 - PDF - German -
Learn More€79.72 -
€331.00 -
€348.00 -
ISO/TR 10064-6:2009 (R2012)
Code of inspection practice
Part 6: Bevel gear measurement methods
2/10/2009 - Paper - English -
Learn More€199.00 -
ISO/TR 10064-6:2009 (R2012)
Code of inspection practice
Part 6: Bevel gear measurement methods
2/10/2009 - Paper - French -
Learn More€199.00 -
€223.00
-
JIS B 1702-3:2008 (R2013)
Cylindrical gears - The accuracy - Part 3: Definitions and allowable values of deviations relevant to corresponding flanks of the gear teeth and radial composite deviations of injection molding plastic gears
4/20/2008 - PDF - Japanese -
Learn More€36.27 -
BS ISO 2490:2007
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions
12/31/2007 - PDF - English -
Learn More€180.00 -
BS ISO 21771:2007
Gears. Cylindrical involute gears and gear pairs. Concepts and geometry
9/28/2007 - PDF - English -
Learn More€377.00 -
BS ISO 6336-6:2006
Calculation of load capacity spur and helical gears service life under variable
9/28/2007 - PDF - English -
Learn More€250.00 -
ISO 2490:2007 (R2022)
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module
Nominal dimensions
9/19/2007 - Paper - English -
Learn More€72.00 -
ISO 2490:2007 (R2022)
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module
Nominal dimensions
9/19/2007 - Paper - French -
Learn More€72.00 -
€248.00
-
BS ISO TR 10064-2:1996
Code of inspection practice Inspection related to radial composite deviations, runout, tooth thickness and backlash
12/29/2006 - PDF - English -
Learn More€293.00 -
PD ISO/TR 10064-5:2005
Code of inspection practice Recommendations relative to evaluation gear measuring instruments
11/30/2006 - PDF - English -
Learn More€377.00 -
BS ISO/TR 10064-4:1998
Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking
11/30/2006 - PDF - English -
Learn More€250.00 -
BS ISO TR 10064-3:1996
Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism axes
11/30/2006 - PDF - English -
Learn More€180.00 -
FD ISO/TR 10064-5, E23-008-5 (08/2006)
Cylindrical gears - Code of inspection practice - Part 5 : recommendations relative to evaluation of gear measuring instruments - Engrenages cylindriques
8/1/2006 - Paper - French -
Learn More€167.33 -
€293.00 -
€174.00
-
€174.00
-
DIN ISO 14635-1:2006-05
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000)
5/1/2006 - PDF - English -
Learn More€99.44 -
DIN ISO 14635-1:2006-05
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000)
5/1/2006 - PDF - German -
Learn More€79.72 -
ISO/TR 10064-5:2005 (R2021)
Code of inspection practice
Part 5: Recommendations relative to evaluation of gear measuring instruments
4/19/2005 - Paper - English -
Learn More€248.00 -
ISO/TR 10064-5:2005 (R2021)
Code of inspection practice
Part 5: Recommendations relative to evaluation of gear measuring instruments
4/19/2005 - Paper - French -
Learn More€248.00 -
BS ISO 18653:2003
Gears. Evaluation of instruments for the measurement of individual gears
12/2/2003 - PDF - English -
Learn More€250.00 -
ISO 18653:2003 (R2021)
Gears
Evaluation of instruments for the measurement of individual gears
11/20/2003 - Paper - English -
Learn More€148.00 -
ISO 18653:2003 (R2021)
Gears
Evaluation of instruments for the measurement of individual gears
11/20/2003 - Paper - French -
Learn More€148.00 -
DIN EN ISO 13691:2003-10
Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001); German and English version EN ISO 13691:2002
10/1/2003 - PDF - English, German -
Learn More€163.74 -
DIN 45635-23:2003-09
Measurement of noise emitted by machines - Airborne noise emission enveloping surface method - Part 23: Gear transmisson
9/1/2003 - PDF - German -
Learn More€45.98 -
BS EN ISO 13691:2002
Petroleum and natural gas industries. High-speed special-purpose gear units
3/24/2003 - PDF - English -
Learn More€377.00 -
NBN EN ISO 13691:2003
Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
2/14/2003 - PDF - German -
Learn More€184.00
