21.200 : Gears

Items 1 to 200 of 527 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  • BS ISO 1328-2:2020

    Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values double radial composite deviations
    3/4/2020 - PDF - English - BSI
    Learn More
    €215.67

  • PD ISO/TR 6336-31:2018:2020 + Redline

    Tracked Changes. Calculation of load capacity spur and helical gears examples micropitting
    2/27/2020 - PDF - English - BSI
    Learn More
    €391.29

  • PD ISO/TS 6336-20:2017:2020 + Redline

    Tracked Changes. Calculation of load capacity spur and helical gears scuffing (also applicable to bevel hypoid gears) -- Flash temperature method
    2/27/2020 - PDF - English - BSI
    Learn More
    €369.72

  • PD ISO/TS 6336-21:2017:2020 + Redline

    Tracked Changes. Calculation of load capacity spur and helical gears scuffing (also applicable to bevel hypoid gears). Integral temperature method
    2/27/2020 - PDF - English - BSI
    Learn More
    €391.29

  • PD ISO/TS 6336-22:2018:2020 + Redline

    Tracked Changes. Calculation of load capacity spur and helical gears micropitting
    2/27/2020 - PDF - English - BSI
    Learn More
    €369.72

  • BS ISO 23509:2016:2020 + Redline

    Tracked Changes. Bevel and hypoid gear geometry
    2/26/2020 - PDF - English - BSI
    Learn More
    €505.28

  • PD ISO/TR 10828:2015:2020 + Redline

    Tracked Changes. Worm gears. Worm profiles and gear mesh geometry
    2/26/2020 - PDF - English - BSI
    Learn More
    €449.83

  • FD ISO/TR 10064-1, E23-008-1 (02/2020)


    2/1/2020 - Paper - French - AFNOR
    Learn More
    €141.43

  • NBN E 23-402:2019

    Gears - Calculation of Tooth Flank Fracture Load Capacity
    12/12/2019 - PDF - French - NBN
    Learn More
    €56.00

  • NBN E 23-402:2019

    Gears - Calculation of Tooth Flank Fracture Load Capacity
    12/12/2019 - PDF - Dutch - NBN
    Learn More
    €56.00

  • SAE J 641:2019-12-02

    Hydrodynamic Drives Terminology
    12/2/2019 - PDF - English - SAE
    Learn More
    €76.50

  • ASTM D5182-19

    Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
    12/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5182-19 + Redline

    Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
    12/1/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • BS ISO 6336-2:2019

    Calculation of load capacity spur and helical gears surface durability (pitting)
    11/29/2019 - PDF - English - BSI
    Learn More
    €284.40

  • BS ISO 6336-1:2019

    Calculation of load capacity spur and helical gears Basic principles, introduction general influence factors
    11/29/2019 - PDF - English - BSI
    Learn More
    €388.68

  • BS ISO 6336-6:2019

    Calculation of load capacity spur and helical gears service life under variable
    11/28/2019 - PDF - English - BSI
    Learn More
    €284.40

  • BS ISO 6336-3:2019

    Calculation of load capacity spur and helical gears tooth bending strength
    11/28/2019 - PDF - English - BSI
    Learn More
    €300.99

  • PD ISO/TR 10064-1:2019

    Code of inspection practice Measurement cylindrical gear tooth flanks
    10/3/2019 - PDF - English - BSI
    Learn More
    €324.69

  • PD ISO/TS 6336-4:2019

    Calculation of load capacity spur and helical gears tooth flank fracture
    8/23/2019 - PDF - English - BSI
    Learn More
    €253.59

  • ASTM E2905/E2905M-19

    Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
    7/15/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM E2905/E2905M-19 + Redline

    Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
    7/15/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • 19/30375068 DC:2019

    BS ISO 4468. Gear hobs. Accuracy requirements
    5/2/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30380793 DC:2019

    BS EN 13001-3-7. Cranes. General design Part 3-7. Limit states and proof of competence machinery. Gears gear boxes
    3/18/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF ISO 1328-2, E23-007-2PR (03/2019)

    Engrenages cylindriques - Système ISO de classification des tolérances sur flancs - Partie 2 : définitions et valeurs admissibles des écarts composés radiaux
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €75.41

  • 19/30374383 DC:2019

    BS ISO 1328-2. Cylindrical gears. system of flank tolerance classification Part 2. Definitions and allowable values double radial composite deviations
    2/6/2019 - PDF - English - BSI
    Learn More
    €23.70

  • FD ISO/TR 6336-31, E23-030-31 (02/2019)

    Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 31 : exemples de calcul de la capacité de charge aux micropiqûres
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €100.63

  • AGMA 6001-F19

    Design and Selection of Components for Enclosed Gear Drives
    1/18/2019 - PDF sécurisé - English - AGMA
    Learn More
    €154.00

  • ISO/TS 6336-4:2019

    Calculation of load capacity of spur and helical gears — Part 4: Calculation of tooth flank fracture load capacity
    1/1/2019 - Paper - English - ISO
    Learn More
    €144.00

  • XP ISO/TS 6336-22, E23-033-22 (01/2019)

    Calcul de la capacité de charge des engrenages à dentures droite et hélicoïdale - Partie 22 : calcul de la capacité de charge aux micropiqûres
    1/1/2019 - Paper - French - AFNOR
    Learn More
    €91.50

  • ANSI/AGMA 2003-D19

    Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel and Spiral Bevel Gear Teeth
    1/1/2019 - PDF sécurisé - English - AGMA
    Learn More
    €209.00

  • SAE J 643:2018-12-05

    Hydrodynamic Drive Test Code
    12/5/2018 - PDF - English - SAE
    Learn More
    €76.50

  • VDI 2742:2018-12

    Motion control systems with non-uniform translating gears - Benefits and implementation aspects
    12/1/2018 - PDF - German - VDI
    Learn More
    €142.61

  • VDI 2743:2018-12

    Powersplit transmissions - Definitions, symbols, calculations, design
    12/1/2018 - PDF - German - VDI
    Learn More
    €122.85

  • VDI/VDE 2612 Blatt 1:2018-11

    Measurement and testing of gears - Evaluation of profile and helix measurements on cylindrical gears with involute profile
    11/1/2018 - PDF - English, German - VDI
    Learn More
    €176.02

  • PD ISO/TR 6336-31:2018

    Calculation of load capacity spur and helical gears examples micropitting
    9/27/2018 - PDF - English - BSI
    Learn More
    €300.99

  • DIN 3996:2018-09

    Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes
    9/1/2018 - PDF - German - DIN
    Learn More
    €153.40

  • ISO/TR 6336-31:2018

    Calculation of load capacity of spur and helical gears — Part 31: Calculation examples of micropitting load capacity
    9/1/2018 - Paper - English - ISO
    Learn More
    €165.00

  • ISO/TR 6336-31:2018

    Calculation of load capacity of spur and helical gears — Part 31: Calculation examples of micropitting load capacity
    9/1/2018 - Paper - French - ISO
    Learn More
    €165.00

  • PD ISO/TS 6336-22:2018

    Calculation of load capacity spur and helical gears micropitting
    8/31/2018 - PDF - English - BSI
    Learn More
    €284.40

  • VDI 2730 Blatt 1:2018-08

    Tolerances and tolerance managment for linkages - Checklists - Approach and tolls
    8/1/2018 - PDF - German - VDI
    Learn More
    €112.06

  • VDI 2142 Blatt 1:2018-08

    Construction of planar cam mechanisms - Fundamentals, profile calculation and design
    8/1/2018 - PDF - English, German - VDI
    Learn More
    €212.16

  • ISO/TS 6336-22:2018

    Calculation of load capacity of spur and helical gears — Part 22: Calculation of micropitting load capacity
    8/1/2018 - Paper - English - ISO
    Learn More
    €165.00

  • ISO/TS 6336-22:2018

    Calculation of load capacity of spur and helical gears — Part 22: Calculation of micropitting load capacity
    8/1/2018 - Paper - French - ISO
    Learn More
    €165.00

  • BS ISO 14635-2:2004:2018

    Gears. FZG test procedures step load A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
    7/30/2018 - PDF - English - BSI
    Learn More
    €215.67

  • VDI 2126:2018-07

    Planar mechanisms - Transfer of a rocker motion into a slider motion with regard to optimum transmission angle
    7/1/2018 - PDF - English, German - VDI
    Learn More
    €120.38

  • FD ISO/TR 6336-30, E23-030-30 (06/2018)

    Calculation of load capacity of spur and helical gears - Part 30 : calculation examples for the application of ISO 6336 parts 1,2,3,5 - Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 30 : exemples d'application de l'ISO 6336 parties 1, 2, 3 et 5
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €128.82

  • XP ISO/TS 6336-20, E23-030-20 (06/2018)

    Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoÏdale - Partie 20 : calcul de la capacité de charge au grippage (applicable également aux engrenages conique et hypoïde) - Méthode de la température-éclair
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €96.32

  • XP ISO/TS 6336-21, E23-030-21 (04/2018)

    Calculation of load capacity of spur and helical gears - Part 21 : calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method - Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 21 : calcul de la capacité de charge au grippage (applicable également aux engrenages conique et hypoïde) - Méthode de la température intégrale
    4/1/2018 - Paper - French - AFNOR
    Learn More
    €105.93

  • DIN ISO 1328-1:2018-03

    Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth (ISO 1328-1:2013)
    3/1/2018 - - - DIN
    Learn More
    From: €141.90

  • PD ISO/TS 6336-20:2017:2018

    Calculation of load capacity spur and helical gears scuffing (also applicable to bevel hypoid gears) -- Flash temperature method
    2/19/2018 - PDF - English - BSI
    Learn More
    €284.40

  • PD ISO/TR 10300-30:2017:2018

    Calculation of load capacity bevel gears ISO rating system for and hypoid gears. Sample calculations
    1/5/2018 - PDF - English - BSI
    Learn More
    €464.52

  • DIN 3966-3:2018-01

    Worms and worm wheel - Part 3: Information to be given to the manufacturer by the purchaser in order to obtain the gear required
    1/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • VDI 2737 Berichtigung:2018-01

    Calculation of the load capacity of the tooth root in internal toothings with influence of the gear rim - Corrigendum concerning standard VDI 2737:2016-12
    1/1/2018 - PDF - English, German - VDI
    Learn More
    €0.00

  • PD ISO/TS 6336-21:2017

    Calculation of load capacity spur and helical gears scuffing (also applicable to bevel hypoid gears). Integral temperature method
    12/21/2017 - PDF - English - BSI
    Learn More
    €300.99

  • SAE J 1619:2017-12-20

    Single Tooth Gear Bending Fatigue Test (Stabilized: Dec 2017)
    12/20/2017 - PDF - English - SAE
    Learn More
    €76.50

  • PD ISO/TR 6336-30:2017

    Calculation of load capacity spur and helical gears Part 30: examples for the application ISO 6336 parts 1,2,3,5
    12/7/2017 - PDF - English - BSI
    Learn More
    €300.99

  • ISO/TR 10300-30:2017

    Calculation of load capacity of bevel gears — Part 30: ISO rating system for bevel and hypoid gears — Sample calculations
    12/1/2017 - Paper - English - ISO
    Learn More
    €207.00

  • DIN 3990-16:2017-11

    Gears - FZG test procedures - Part 16: Determination of the mico-pitting load-carrying capacity of lubricants - FZG-test-method GT-C/8,3/90
    11/1/2017 - PDF - German - DIN
    Learn More
    €130.80

  • ISO/TS 6336-20:2017

    Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Flash temperature method
    11/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO/TS 6336-20:2017

    Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Flash temperature method
    11/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • ISO/TS 6336-21:2017

    Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method
    11/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO/TS 6336-21:2017

    Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method
    11/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • ISO/TR 6336-30:2017

    Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
    11/1/2017 - Paper - English - ISO
    Learn More
    €186.00

  • ISO/TR 6336-30:2017

    Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
    11/1/2017 - Paper - French - ISO
    Learn More
    €186.00

  • DIN 4000-140/A1:2017-10

    Tabular layouts of properties - Part 140: Toothing system data of work pieces; Amendment 1
    10/1/2017 - PDF - German - DIN
    Learn More
    €23.80

  • DIN 3975-1:2017-09

    Definitions and parameters on cylindrical worm gear pairs with rectangular crossing shafts - Part 1: Worm and worm wheel
    9/1/2017 - PDF - German - DIN
    Learn More
    €103.00

  • VDI 2729 Blatt 2:2017-07

    Modular analysis of planar linkages with rotating and sliding joints - Kinetostatic analysis
    7/1/2017 - PDF - German - VDI
    Learn More
    €168.48

  • NF ISO 14104, E23-034 (06/2017)

    Gears - Surface temper etch inspection after grinding, chemical method - Engrenages - Contrôle par attaque chimique des zones surchauffées lors de la rectification
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €64.01

  • JIS B 1701-2:2017

    Cylindrical gears for general engineering and for heavy engineering - Part 2: Module
    5/22/2017 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1756:2017

    Gears - Surface temper etch inspection after grinding, chemical method
    5/22/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • BS ISO 14104:2017

    Gears. Surface temper etch inspection after grinding, chemical method
    4/25/2017 - PDF - English - BSI
    Learn More
    €215.67

  • NF ISO 23509, E23-040 (04/2017)

    Bevel and hypoid gear geometry - Géométrie des engrenages coniques et hypoïdes
    4/1/2017 - Paper - French - AFNOR
    Learn More
    €170.76

  • ISO 14104:2017

    Gears — Surface temper etch inspection after grinding, chemical method
    4/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 14104:2017

    Gears — Surface temper etch inspection after grinding, chemical method
    4/1/2017 - Paper - French - ISO
    Learn More
    €92.00

  • NF ISO 6336-5, E23-030-5 (02/2017)

    Calculation of load capacity of spur and helical gears - Part 5 : strength and quality of materials - Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 5 : résistance et qualité des matériaux
    2/1/2017 - Paper - French - AFNOR
    Learn More
    €100.63

  • AGMA 905-A:2017

    Inspection of Molded Plastic Gears
    1/1/2017 - PDF sécurisé - English - AGMA
    Learn More
    €92.40

  • VDI 2737:2016-12

    Calculation of the load capacity of the tooth root in internal toothings with influence of the gear rim
    12/1/2016 - PDF - English, German - VDI
    Learn More
    €212.16

  • VDI 2729 Blatt 1 Berichtigung:2016-12

    Modular analysis of planar linkages with rotating and sliding joints - Kinematic analysis - Corrigendum concerning standard VDI 2729 Part 1:2016-06
    12/1/2016 - PDF - English, German - VDI
    Learn More
    €0.00

  • BS ISO 23509:2016

    Bevel and hypoid gear geometry
    11/30/2016 - PDF - English - BSI
    Learn More
    €388.68

  • JIS B 4355:2016

    Gear hobs - Accuracy requirements
    11/21/2016 - PDF - Japanese - JSA
    Learn More
    €41.86

  • VG 85540:2016-11

    Bevel gears for remote controls; Text in German and English
    11/1/2016 - PDF - English, German - DIN
    Learn More
    €54.80

  • ISO 23509:2016

    Bevel and hypoid gear geometry
    11/1/2016 - Paper - English - ISO
    Learn More
    €207.00

  • ISO 23509:2016

    Bevel and hypoid gear geometry
    11/1/2016 - Paper - French - ISO
    Learn More
    €207.00

  • VDI 2727 Blatt 2:2016-10

    Catalogues for machine design - Mechanisms for motion transfer - Converting unidirectional rotation or alternate push into rectilinear alternate motion
    10/1/2016 - PDF - German - VDI
    Learn More
    €212.16

  • BS ISO 6336-5:2016

    Calculation of load capacity spur and helical gears Strength quality materials
    8/31/2016 - PDF - English - BSI
    Learn More
    €300.99

  • VDI 2039 Berichtigung:2016-08

    Torsional vibration of drivelines - Calculation, measurement, reduction - Corrigendum concerning standard VDI 2039:2016-06
    8/1/2016 - PDF - English, German - VDI
    Learn More
    €0.00

  • ISO 6336-5:2016

    Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
    8/1/2016 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 6336-5:2016

    Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
    8/1/2016 - Paper - French - ISO
    Learn More
    €165.00

  • VDI 2736 Blatt 1:2016-07

    Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design
    7/1/2016 - PDF - English, German - VDI
    Learn More
    €186.94

  • 16/30335341 DC:2016

    BS ISO 14104. Gears. Surface temper etch inspection after grinding, chemical method
    6/29/2016 - PDF - English - BSI
    Learn More
    €23.70

  • VDI 2729 Blatt 1:2016-06

    Modular analysis of planar linkages with rotating and sliding joints - Kinematic analysis
    6/1/2016 - PDF - English, German - VDI
    Learn More
    €236.47

  • VDI 2039:2016-06

    Torsional vibration of drivelines - Calculation, measurement, reduction
    6/1/2016 - PDF - English, German - VDI
    Learn More
    €269.62

  • FD ISO/TR 10828, E23-003 (05/2016)

    Worm gears - Worm profiles and gear mesh geometry - Engrenages à vis cylindriques - Géométrie des profils de vis et des engrènements
    5/1/2016 - Paper - French - AFNOR
    Learn More
    €165.09

  • JIS B 1702-1:2016

    Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    4/20/2016 - PDF - Japanese - JSA
    Learn More
    €46.02

  • JIS B 1760-1:2016

    Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
    4/20/2016 - PDF - Japanese - JSA
    Learn More
    €25.00

  • VDI 2125:2016-04

    Planar mechanisms - Transfer of a slider motion into a rocker motion with regard to optimum transmission angle
    4/1/2016 - PDF - English, German - VDI
    Learn More
    €103.22

  • VDI 2728 Blatt 2:2016-03

    Solution of motion problems using symmetrical coupler curves - Problems of guidance - straight line
    3/1/2016 - PDF - English, German - VDI
    Learn More
    €127.14

  • VDI 2736 Blatt 4:2016-01

    Thermoplastic gear wheels - Determination of strength parameters on gears
    1/1/2016 - PDF - English, German - VDI
    Learn More
    €96.59

  • AGMA 2002-C:2016

    Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing
    1/1/2016 - PDF sécurisé - English - AGMA
    Learn More
    €187.00

  • AGMA 6123-C:2016

    Design Manual for Enclosed Epicyclic Gear Drives
    1/1/2016 - PDF sécurisé - English - AGMA
    Learn More
    €193.60

  • AGMA 9005-F:2016

    Industrial Gear Lubrication
    1/1/2016 - PDF sécurisé - English - AGMA
    Learn More
    €123.20

  • PD ISO/TR 10828:2015

    Worm gears. Worm profiles and gear mesh geometry
    9/30/2015 - PDF - English - BSI
    Learn More
    €346.02

  • BS ISO 1122-2:1999:2015

    Vocabulary of gear terms Definitions related to worm geometry
    9/30/2015 - PDF - English - BSI
    Learn More
    €215.67

  • JIS B 0160/ERRATUM 1:2015

    ERRATUM
    8/5/2015 - PDF - Japanese - JSA
    Learn More
    €0.00

  • ISO/TR 10828:2015

    Worm gears — Worm profiles and gear mesh geometry
    8/1/2015 - Paper - English - ISO
    Learn More
    €207.00

  • ISO/TR 10828:2015

    Worm gears — Worm profiles and gear mesh geometry
    8/1/2015 - Paper - French - ISO
    Learn More
    €207.00

  • VDI 2156:2015-06

    Simple spatial crank mechanisms - Classification and conception
    6/1/2015 - PDF - English, German - VDI
    Learn More
    €83.07

  • VDI 2154:2015-03

    Spherical four-bar crank mechanisms - Fundamentals and system
    3/1/2015 - PDF - English, German - VDI
    Learn More
    €103.22

  • VDI/VDE 2612 Blatt 5:2015-02

    Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
    2/1/2015 - PDF - English, German - VDI
    Learn More
    €103.22

  • JIS B 0160:2015

    Gears - Wear and damage to gear teeth - Terminology
    1/20/2015 - PDF - Japanese - JSA
    Learn More
    €62.66

  • VDI/VDE 2610 Berichtigung 1:2015-01

    Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition - Corrigendum concerning standard VDI/VDE 2610:2014-05
    1/1/2015 - PDF - English, German - VDI
    Learn More
    €0.00

  • AGMA 920-B:2015

    Materials for Plastic Gears
    1/1/2015 - PDF sécurisé - English - AGMA
    Learn More
    €68.20

  • AGMA 2015-2-B15

    Gear Tooth Flank Tolerance Classification System - Definitions and Allowable Values of Double Flank Radial Composite Deviations
    1/1/2015 - PDF sécurisé - English - AGMA
    Learn More
    €74.80

  • ANSI/AGMA 6014-B15

    Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment
    1/1/2015 - PDF sécurisé - English - AGMA
    Learn More
    €171.60

  • AGMA 6114-B:2015

    Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition)
    1/1/2015 - PDF sécurisé - English - AGMA
    Learn More
    €137.50

  • AGMA 6002-C:2015

    Design Guide for Vehicle Spur and Helical Gears
    1/1/2015 - PDF sécurisé - English - AGMA
    Learn More
    €84.70

  • AGMA ISO 1328-1-B14

    Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    10/6/2014 - PDF sécurisé - English - AGMA
    Learn More
    €170.50

  • AGMA 1328-1-B14

    Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    9/30/2014 - PDF sécurisé - English - AGMA
    Learn More
    €170.50

  • JIS B 1723:2014

    Dimensions of cylindrical worm gears
    9/22/2014 - PDF - Japanese - JSA
    Learn More
    €25.00

  • VDI 2142 Blatt 3:2014-09

    Construction of planar cam mechanisms - Practical examples
    9/1/2014 - PDF - English, German - VDI
    Learn More
    €190.84

  • DIN 21773:2014-08

    Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness
    8/1/2014 - PDF - German - DIN
    Learn More
    €81.60

  • DIN ISO 21771:2014-08

    Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007)
    8/1/2014 - - - DIN
    Learn More
    From: €170.90

  • VDI 2142 Blatt 2 Berichtigung:2014-07

    Construction of planar cam mechanisms - Calculation modules for cam and crank mechanisms - Corrigendum concerning guideline VDI 2142 Part 2:2011-06
    7/1/2014 - PDF - German - VDI
    Learn More
    €0.00

  • VDI 2736 Blatt 2:2014-06

    Thermoplastic gear wheels - Cylindrical gears - Calculation of the load-carrying capacity
    6/1/2014 - PDF - English, German - VDI
    Learn More
    €124.80

  • VDI 2736 Blatt 3:2014-05

    Thermoplastic gear wheels - Crossed helical gears - Mating cylindrical worm with helical gear - Calculation of the load-carrying capacity
    5/1/2014 - PDF - English, German - VDI
    Learn More
    €104.78

  • VDI/VDE 2610:2014-05

    Exchange format for gear data - Gear Data Exchange Format (GDE Format) - Definition
    5/1/2014 - PDF - English, German - VDI
    Learn More
    €83.07

  • ISO 10300-3:2014

    Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
    4/1/2014 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 10300-2:2014

    Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting)
    4/1/2014 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 10300-1:2014

    Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
    4/1/2014 - Paper - English - ISO
    Learn More
    €186.00

  • BS ISO 10300-3:2014

    Calculation of load capacity bevel gears tooth root strength
    3/31/2014 - PDF - English - BSI
    Learn More
    €300.99

  • BS ISO 10300-2:2014

    Calculation of load capacity bevel gears surface durability (pitting)
    3/31/2014 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 10300-1:2014

    Calculation of load capacity bevel gears Introduction and general influence factors
    3/31/2014 - PDF - English - BSI
    Learn More
    €300.99

  • AGMA 2011-B:2014

    Cylindrical Wormgearing Tolerance and Inspection Methods
    1/1/2014 - PDF sécurisé - English - AGMA
    Learn More
    €107.80

  • AGMA 919-1-A:2014

    Condition Monitoring and Diagnostics of Gear Units and Open Gears: Part 1 - Basics
    1/1/2014 - PDF sécurisé - English - AGMA
    Learn More
    €60.50

  • AGMA 6011-J:2014

    Specification for high speed helical gear units
    1/1/2014 - PDF sécurisé - English - AGMA
    Learn More
    €134.20

  • JIS B 1753:2013

    Acceptance code for gear units - Test code for airborne sound
    11/20/2013 - PDF - Japanese - JSA
    Learn More
    €52.91

  • JIS B 4354:2013

    Gear hobs - Part 1: Dimensions of solid hobs
    11/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1705:2013

    Backlashes for bevel gears
    11/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF ISO 1328-1, E23-007-1 (11/2013)

    Cylindrical gears - ISO system of flank tolerance classification - Part 1 : definitions and allowable values of deviations relevant to flanks of gear teeth - Engrenages cylindriques
    11/1/2013 - Paper - French - AFNOR
    Learn More
    €110.46

  • BS ISO 1328-1:2013

    Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values deviations relevant to flanks gear teeth
    9/30/2013 - PDF - English - BSI
    Learn More
    €300.99

  • ISO 1328-1:2013

    Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    9/1/2013 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 1328-1:2013

    Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
    9/1/2013 - Paper - French - ISO
    Learn More
    €165.00

  • JIS B 1759:2013

    Estimation of tooth bending strength of cylindrical plastic gears
    6/20/2013 - PDF - Japanese - JSA
    Learn More
    €36.27

  • JIS B 0102-1:2013

    Vocabulary of gear terms - Part 1: Definitions related to geometry
    5/20/2013 - PDF - Japanese - JSA
    Learn More
    €58.50

  • JIS B 0102-2:2013

    Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
    5/20/2013 - PDF - Japanese - JSA
    Learn More
    €36.27

  • BS EN 61400-4:2013

    Wind turbines Design requirements for wind turbine gea
    4/30/2013 - PDF - English - BSI
    Learn More
    €405.27

  • JIS B 1758:2013 (R2017)

    Acceptance tests for gear measuring instruments
    2/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1757-3:2013 (R2017)

    Evaluation of instruments for the measurement of individual gears - Part 3: Helix measurement using plane artifacts
    2/20/2013 - PDF - Japanese - JSA
    Learn More
    €46.02

  • JIS B 1757-4:2013 (R2017)

    Evaluation of instruments for the measurement of individual gears - Part 4: Pitch measurement using sphere artifacts
    2/20/2013 - PDF - Japanese - JSA
    Learn More
    €25.00

  • AGMA 6032-B:2013

    Standard for Marine Gear Units: Rating and Application for Spur and Helical Gear Teeth
    1/1/2013 - PDF sécurisé - English - AGMA
    Learn More
    €116.60

  • AGMA 6132-B:2013

    Standard for marine gear units: Rating and application for spur and helical gear teeth (Metric edition)
    1/1/2013 - PDF sécurisé - English - AGMA
    Learn More
    €111.10

  • Traitement thermique des engrenages


    12/27/2012 - Paper - French - CETIM
    Learn More
    €30.00

  • VDI 2157:2012-10 (R2016)

    Planetary gear drives - Definitions, symbols, designs, calculations
    10/1/2012 - PDF - English, German - VDI
    Learn More
    €248.95

  • DIN 3996:2012-09

    Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes
    9/1/2012 - PDF - German - DIN
    Learn More
    €147.20

  • AGMA 942-A-2012

    Metallurgical Specifications for Powder Metallurgy, PM, Steel Gearing
    5/5/2012 - PDF - English - AGMA
    Learn More
    €84.70

  • JIS B 0003:2012 (R2016)

    Technical drawings - Gears
    2/20/2012 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0121:2012 (R2016)

    International gear notation - Symbols for geometrical data
    1/20/2012 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1757-1:2012 (R2016)

    Evaluation of instruments for the measurement of individual gears - Part 1: Method by gear shape artifacts
    1/20/2012 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1701-1:2012 (R2016)

    Cylindrical gears for general and heavy engineering - Part 1: Standard basic rack tooth profile
    1/20/2012 - PDF - Japanese - JSA
    Learn More
    €25.00

  • AGMA 910-D:2012

    Formats for Fine-Pitch Gear Specification Data
    1/1/2012 - PDF sécurisé - English - AGMA
    Learn More
    €64.90

  • AGMA ISO 22849-A-12

    Design Recommendations for Bevel Gears
    1/1/2012 - PDF sécurisé - English - AGMA
    Learn More
    €181.50

  • AGMA 937-A:2012

    Aerospace bevel gears
    1/1/2012 - PDF sécurisé - English - AGMA
    Learn More
    €119.90

  • DIN 4000-144:2011-09

    Tabular layouts of properties - Part 144: Master gears and truing gears for involute teeth
    9/1/2011 - PDF - German - DIN
    Learn More
    €75.40

  • DIN ISO 14635-3:2011-08

    Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
    8/1/2011 - - - DIN
    Learn More
    From: €89.00

  • SAE J 640:2011-07-08

    Symbols for Hydrodynamic Drives (Stabilized: Jul 2011)
    7/8/2011 - PDF - English - SAE
    Learn More
    €76.50

  • VDI 2142 Blatt 2:2011-06 (R2015)

    Construction of planar cam mechanisms - Calculation modules for cam and crank mechanisms
    6/1/2011 - PDF - English, German - VDI
    Learn More
    €183.17

  • VDI 2149 Blatt 2:2011-06 (R2015)

    Transmission dynamics - Elastic mechanisms
    6/1/2011 - PDF - German - VDI
    Learn More
    €144.69

  • PD ISO/TR 22849:2011

    Design recommendations for bevel gears
    5/31/2011 - PDF - English - BSI
    Learn More
    €284.40

  • FD ISO/TR 14521, E23-036 (05/2011)

    Gear - Calculation of load capacity of wormgears - Engrenages
    5/1/2011 - Paper - French - AFNOR
    Learn More
    €141.43

  • ISO/TR 22849:2011

    Design recommendations for bevel gears
    4/1/2011 - Paper - English - ISO
    Learn More
    €165.00

  • PD ISO/TR 14521:2010:2011

    Gears. Calculation of load capacity of wormgears
    2/28/2011 - PDF - English - BSI
    Learn More
    €324.69

  • DIN 4000-140:2011-02

    Tabular layouts of properties - Part 140: Toothing system data of work pieces
    2/1/2011 - PDF - German - DIN
    Learn More
    €89.00

  • AGMA 900-I:2011

    Style Manual for the Preparation of Standards, Information Sheets and Editorial Manuals
    1/1/2011 - PDF sécurisé - English - AGMA
    Learn More
    €37.40

  • AGMA 2008-D:2011

    Assembling bevel gears
    1/1/2011 - PDF sécurisé - English - AGMA
    Learn More
    €83.60

  • ISO/TR 14521:2010

    Gears — Calculation of load capacity of wormgears
    11/1/2010 - Paper - English - ISO
    Learn More
    €207.00

  • ISO/TR 14521:2010

    Gears — Calculation of load capacity of wormgears
    11/1/2010 - Paper - French - ISO
    Learn More
    €207.00

  • BS ISO 1122-1:1998:2010

    Vocabulary of gear terms Definitions related to geometry
    10/31/2010 - PDF - English - BSI
    Learn More
    €324.69

  • FD ISO/TR 10064-6, E23-008-6 (10/2010)

    Code of inspection practice - Part 6 : bevel gear measurement methods
    10/1/2010 - Paper - French - AFNOR
    Learn More
    €96.32

  • VDI 2727 Blatt 6:2010-10 (R2016)

    Catalogues for machine design - Mechanisms for motion transfer - Mechanisms for extreme oscillating motion
    10/1/2010 - PDF - German - VDI
    Learn More
    €151.97

  • JIS B 1757-2:2010 (R2015)

    Evaluation of instruments for the measurement of individual gears - Part 2: Tooth form measurement using sphere or cylinder artifacts
    9/21/2010 - PDF - Japanese - JSA
    Learn More
    €46.02

  • JIS B 1702-3/ERRATUM 1:2010

    ERRATUM
    4/8/2010 - - - JSA
    Learn More
    €0.00

  • DIN 3970:2010-04

    Master gears for checking cylindrical gears - Gear blanks and gearing
    4/1/2010 - - - DIN
    Learn More
    From: €82.60

  • JIS B 1704:2010 (R2014)

    Bevel gear
    3/23/2010 - PDF - Japanese - JSA
    Learn More
    €25.00

  • FD E23-041 (03/2010)

    Gears - Specification for the on site inspection of gearing assembly when start up open gears for mills, kilns, dryers and coolers - Engrenages
    3/1/2010 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS ISO 4468:2009:2010

    Gear hobs. Accuracy requirements
    1/31/2010 - PDF - English - BSI
    Learn More
    €253.59

  • AGMA ISO 10064-6-A:2010

    Code of inspection practice - Part 6: Bevel gear measurement methods
    1/1/2010 - PDF sécurisé - English - AGMA
    Learn More
    €147.40

  • DIN ISO 14635-2:2010-01

    Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004)
    1/1/2010 - - - DIN
    Learn More
    From: €82.60

  • DIN ISO 18653:2009-12

    Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003)
    12/1/2009 - - - DIN
    Learn More
    From: €82.60

  • ISO 4468:2009/Cor 1:2009

    Gear hobs — Accuracy requirements — Technical Corrigendum 1
    11/1/2009 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 4468:2009/Cor 1:2009

    Gear hobs — Accuracy requirements — Technical Corrigendum 1
    11/1/2009 - Paper - French - ISO
    Learn More
    €0.00

  • PD ISO/TR 10064-6:2009

    Code of inspection practice Bevel gear measurement methods
    9/30/2009 - PDF - English - BSI
    Learn More
    €284.40

  • ISO 1122-1:1998/Cor 2:2009

    Vocabulary of gear terms — Part 1: Definitions related to geometry — Technical Corrigendum 2
    6/1/2009 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 4468:2009

    Gear hobs — Accuracy requirements
    6/1/2009 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 1122-1:1998/Cor 2:2009

    Vocabulary of gear terms — Part 1: Definitions related to geometry — Technical Corrigendum 2
    6/1/2009 - Paper - French - ISO
    Learn More
    €0.00

  • AGMA 940-A-2009

    Double Helical Epicyclic Gear Units
    5/5/2009 - PDF - English - AGMA
    Learn More
    €74.80

  • VDI 2731 Blatt 1:2009-04 (R2014)

    Micro gears - Basic principles
    4/1/2009 - PDF - English, German - VDI
    Learn More
    €151.97

  • PD ISO/TR 18792:2008:2009

    Lubrication of industrial gear drives
    2/28/2009 - PDF - English - BSI
    Learn More
    €300.99

  • JIS B 4351/AMENDMENT 1:2009 (R2013)

    Straight bevel gear generating cutters (Type G) (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4232/AMENDMENT 1:2009 (R2013)

    Involute gear milling cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 4356/AMENDMENT 1:2009 (R2013)

    Pinion type cutters (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

Items 1 to 200 of 527 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3