21.060 : Fasteners
-
€45.00
-
NF EN ISO 3506-5, E25-025 (02/2024)
Fixations - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 5 : fixations spéciales (incluant également les fixations en alliages de nickel) pour utilisation à hautes températures
2/1/2024 - Paper - French -
Learn More€119.00 -
PR NF EN ISO 13669, E25-776PR (01/2024)
Fixations - Goupilles cannelées - Exigences générales
1/1/2024 - Paper - English, French -
Learn More€80.50 -
PR NF EN ISO 3506-3, E25-100-3PR (01/2024)
Fixations - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 3: Vis sans tête (et fixations similaires non soumises à des contraintes de traction) de grades et classes de dureté spécifiées
1/1/2024 - Paper - English, French -
Learn More€74.00 -
PR NF EN ISO 8739, E25-761PR (01/2024)
Fixations - Goupilles cannelées constantes, à bout pilote - Cannelures diamant sur toute la longueur
1/1/2024 - Paper - English, French -
Learn More€64.50 -
PR NF EN ISO 13670, E25-777PR (01/2024)
Fixations - Goupilles cannelées inversées - Cannelures progressives sur un quart de la longueur à chaque extrémité
1/1/2024 - Paper - English, French -
Learn More€64.50 -
PR NF EN ISO 3506-4, E25-651PR (01/2024)
Fixations - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 4 : Vis à tôle de grades et classes de dureté spécifiées
1/1/2024 - Paper - English, French -
Learn More€80.50 -
PR NF EN ISO 13672, E25-778PR (01/2024)
Fixations - Goupilles cannelées constantes - Cannelures diamant sur la moitié de la longueur
1/1/2024 - Paper - English, French -
Learn More€64.50 -
€60.67
-
€60.67
-
€60.67
-
€48.00
-
€48.00
-
€60.67
-
€64.50
-
€64.50
-
€64.50
-
€64.50
-
PR NF ISO 3506-7, E25-500-2PR (04/2023)
Fixations - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 7 : rondelles de forme plane de grades et classes de qualité spécifiés
4/1/2023 - Paper - English, French -
Learn More€80.50 -
NF EN ISO 7380-2, E25-126-2 (01/2023)
Fixations - Vis à tête cylindrique bombée plate à capacité de charge réduite - Partie 2 : tête cylindrique bombée plate à six pans creux et embase plate
1/1/2023 - Paper - French -
Learn More€60.67 -
NF EN ISO 14581, E25-180 (01/2023)
Fixations - Vis à tête fraisée (tête commune) à six lobes internes à capacité de charge réduite
1/1/2023 - Paper - French -
Learn More€60.67 -
NF EN ISO 7380-1, E25-126-1 (01/2023)
Fixations - Vis à tête cylindrique bombée plate à capacité de charge réduite - Partie 1 : tête cylindrique bombée plate à six pans creux
1/1/2023 - Paper - French -
Learn More€60.67 -
NF EN ISO 2702, E25-650-1 (12/2022)
Fixations - Vis à tôle traitées thermiquement - Caractéristiques mécaniques et physiques
12/1/2022 - Paper - French -
Learn More€60.67 -
NF EN 13411-3, A47-251-3 (12/2022)
Terminaisons pour câbles en acier - Sécurité - Partie 3 : manchons et boucles manchonnées
12/1/2022 - Paper - French -
Learn More€86.67 -
NF EN 1992-4/NA, E27-817/NA (12/2022)
Eurocode 2 - Design of concrete structures - Part 4 : design of fastenings for use in concrete - National annex to NF EN 1992-4:2018
12/1/2022 - Paper - French -
Learn More€60.67 -
NF EN ISO 898-2, E25-400-1 (10/2022)
Fixations - Caractéristiques mécaniques des fixations en acier au carbone et en acier allié - Partie 2 : écrous de classes de qualité spécifiées
10/1/2022 - Paper - French -
Learn More€99.33 -
NF E25-415 (10/2022)
Fixations - Ecrous normaux hexagonaux à rondelle conique lisse imperdable
10/1/2022 - Paper - French -
Learn More€48.00 -
NF E25-416 (10/2022)
Fixations - Ecrous normaux hexagonaux à rondelle plate imperdable
10/1/2022 - Paper - French -
Learn More€48.00 -
NF EN ISO 4015, E25-113 (07/2022)
Fixations - Vis à tête hexagonale partiellement filetées à tige réduite (diamètre de tige diamètre sur flanc de filet) - Grade B
7/1/2022 - Paper - French -
Learn More€60.67 -
NF EN ISO 8676, E25-151 (07/2022)
Hexagon head screws with metric fine pitch thread - Product grades A and B
7/1/2022 - Paper - French -
Learn More€75.67 -
€75.67
-
€60.67
-
NF EN ISO 8765, E25-152 (07/2022)
Hexagon head bolts with metric fine pitch thread - Product grades A and B
7/1/2022 - Paper - French -
Learn More€75.67 -
€75.67
-
€60.67
-
NF EN ISO 3506-6, E25-026 (06/2022)
Fixations - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 6 : règles générales pour la sélection des aciers inoxydables et des alliages de nickel pour les fixations
6/1/2022 - Paper - French -
Learn More€86.67 -
€130.67
-
€86.67
-
NF E25-046-1 (03/2022)
Fasteners - Loosening/untightening resistance test - Part 1 : Methodology by " Staircase" approach
3/1/2022 - Paper - French -
Learn More€60.67 -
XP E25-046-2 (02/2022)
Fasteners - Loosening/untightening resistance test - Part 2 : Test method by alternate bending, called "helicopter" test
2/1/2022 - Paper - French -
Learn More€60.67 -
FD CEN ISO/TR 20491, E25-043 (02/2022)
Fixations - Principes de la fragilisation par l'hydrogène pour les fixations en acier
2/1/2022 - Paper - French -
Learn More€86.67 -
NF EN 13411-4, A47-251-4 (12/2021)
Terminaisons pour câbles en acier - Sécurité - Partie 4 : manchonnage à l'aide de métal et de résine
12/1/2021 - Paper - French -
Learn More€86.67 -
NF E25-035-2/A1 (10/2021)
Assemblages vissés - Partie 2 : écrous autofreinés en acier inoxydable - Caractéristiques fonctionnelles, méthodes d'essai de couple/tension, d'autofreinage et de charge d'épreuve
10/1/2021 - Paper - French -
Learn More€25.67 -
NF E25-417 (09/2021)
Fasteners - Prevailing torque hexagon nuts (non-metallic insert) and conical washer assemblies, symbol H FR + CL - Product grade A - Fixations - Ecrous hexagonaux autofreinés (anneau non métallique) à rondelle conique lisse imperdable, symbole H FR + CL - Grade A
9/1/2021 - Paper - French -
Learn More€60.67 -
NF EN ISO 13918/A1, A87-021/A1 (09/2021)
Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons - Amendement 1
9/1/2021 - Paper - French -
Learn More€25.50 -
NF E25-000 (08/2021)
Fasteners - General vocabulary and structure of fasteners standards - Fixations - Vocabulaire général et structure des normes
8/1/2021 - Paper - French -
Learn More€60.67 -
NF E25-411 (08/2021)
Fasteners - Prevailing torque (all-metal) hexagon nuts, with slot(s) - Symbol H FR - Fixations - Ecrous hexagonaux autofreinés tout métal avec fente(s), symbole H FR - Grades A et B
8/1/2021 - Paper - French -
Learn More€48.00 -
NF E25-518 (08/2021)
Fasteners - Thick plain washers for mechanical applications - Product grade A
8/1/2021 - Paper - French -
Learn More€48.00 -
NF EN 17490, P28-115 (08/2021)
Determination of screw pull out forces from screw thread channels
8/1/2021 - Paper - French -
Learn More€60.67 -
NF EN 13411-7, A47-251-7 (07/2021)
Terminations for steel wire ropes - Safety - Part 7 : Symmetric wedge socket
7/1/2021 - Paper - French -
Learn More€75.67 -
NF E25-303 (06/2021)
Fasteners - Drilled spherical head screws known as 'bed screw' - Fixations - Vis à tête sphérique percée dite « vis de lit »
6/1/2021 - Paper - French -
Learn More€48.00 -
NF EN ISO 1891-2/A1, E25-013-2/A1 (06/2021)
Fasteners - Terminology - Part 2 : vocabulary and definitions for coatings AMENDMENT 1
6/1/2021 - Paper - French -
Learn More€25.50 -
NF EN ISO 898-3/A1, E25-500/A1 (05/2021)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3 : Flat washers with specified property classes - Amendment 1
5/1/2021 - Paper - French -
Learn More€25.50 -
NF EN 13411-9, A47-251-9 (04/2021)
Terminations for steel wire ropes - Safety - Part 9 : solid thimbles
4/1/2021 - Paper - French -
Learn More€75.67 -
NF EN 17334, T76-167 (03/2021)
Glued-in rods in glued structural timber products - Testing, requirements and bond shear strength classification
3/1/2021 - Paper - French -
Learn More€108.33 -
NF EN 1515-4, E29-042-4 (03/2021)
Flanges and their joints - Bolting - Part 4 : selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU - Brides et leurs assemblages - Boulonnerie - Partie 4 : Sélection de la boulonnerie pour équipements relevant de la Directive Equipments sous pression 2014/68/EU
3/1/2021 - Paper - French -
Learn More€75.67 -
NF E25-035-1 (04/2020)
Bolted joints - Part 1 : stainless steel fasteners - Test methods for torque/clamp force and tightening ability
4/1/2020 - Paper - French -
Learn More€119.00 -
NF E25-035-2 (04/2020)
Bolted joints - Part 2 : prevailing torque stainless steel nuts - Functional properties, test methods for torque/clamp force and prevailing torques and proof load - Assemblages vissés - Partie 2 : Écrous autofreinés en acier inoxydable - Caractéristiques fonctionnelles, méthodes d'essai de couple/tension, d'autofreinage et de charge d'épreuve
4/1/2020 - Paper - French -
Learn More€86.67 -
NF EN ISO 3506-2, E25-400-6 (04/2020)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2 : Nuts with specified grades and property classes - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 2 : Écrous de classes de qualité spécifiées - Filetage à pas gros et filetage à pas fin
4/1/2020 - Paper - French -
Learn More€99.33 -
NF EN ISO 3506-1, E25-100-6 (04/2020)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1 : bolts, screws and studs with specified grades and property classes - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 1 : vis, goujons et tiges filetées de classes de qualité spécifiées - Filetage à pas gros et filetage à pas fin
4/1/2020 - Paper - French -
Learn More€108.33 -
NF EN ISO 10642, E25-146 (10/2019)
Fasteners - Hexagon socket countersunk head screws with reduced loadability
10/1/2019 - Paper - French -
Learn More€60.50 -
€60.50
-
NF EN ISO 7053, E25-665 (07/2019)
Fasteners - Hexagon washer head tapping screws - Vis à tôle à tête hexagonale à embase plate
7/1/2019 - Paper - French -
Learn More€48.00 -
NF EN ISO 15480, E25-856 (07/2019)
Fasteners - Hexagon washer head drilling screws with tapping screw thread - Vis autoperceuses à tête hexagonale à ambase plate, avec filetage de vis à tôle
7/1/2019 - Paper - French -
Learn More€48.00 -
NF E25-805 (05/2019)
High-strength structural bolting assemblies for preloading - System HR - Hexagon bolt + nut + washers assemblies with diameters M39 to M72
5/1/2019 - Paper - French -
Learn More€86.67 -
PR NF EN ISO 2702, E25-650-1PR (05/2019)
Fixations - Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques et physiques
5/1/2019 - Paper - English, French -
Learn More€60.48 -
FD CEN/TR 17081, E27-821 (04/2019)
Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
4/1/2019 - Paper - French -
Learn More€60.67 -
FD CEN/TR 17079, E27-818 (03/2019)
Design of fastenings for use in concrete - Redundant non-structural systems
3/1/2019 - Paper - French -
Learn More€48.00 -
NF E25-129 (11/2018)
Screws - Large round flat « poêlier » head with reduced loadability, slotted - Symbol RL S
11/1/2018 - Paper - French -
Learn More€48.00 -
NF E25-139 (11/2018)
Screws - Z cross recessed and slotted pan head - Symbol CBL ZS
11/1/2018 - Paper - French -
Learn More€48.00 -
€75.67
-
NF E25-404 (10/2018)
Square regular nuts (style 1) - Product grade C - Symbol Q - Ecrous carrés normaux (style 1) - Grade C - Symbole Q
10/1/2018 - Paper - French -
Learn More€48.00 -
NF E25-122 (10/2018)
Screws - Z Cross recessed mushroom head ''poeliers'' with reduced loadability - Symbol RL Z
10/1/2018 - Paper - French -
Learn More€48.00 -
€86.67
-
NF EN 1992-4, E27-817 (09/2018)
Eurocode 2 - Design of concrete structures - Part 4 : design of fastenings for use in concrete
9/1/2018 - Paper - French -
Learn More€192.00 -
NF EN ISO 10683, E25-040 (09/2018)
Fasteners - Non-electrolytically applied zinc flake coatings systems - Fixations - Revêtements non électrolytiques de zinc lamellaire
9/1/2018 - Paper - French -
Learn More€99.00 -
NF EN 14399-8, E25-801-8 (07/2018)
High-strength structural bolting assemblies for preloading - Part 8 : system HV - Hexagon fit bolt and nut assemblies
7/1/2018 - Paper - French -
Learn More€75.67 -
NF EN 14399-7, E25-801-7 (07/2018)
High-strength structural bolting assemblies for preloading - Part 7 : system HR - Countersunk head bolt and nut assemblies
7/1/2018 - Paper - French -
Learn More€86.50 -
NF EN ISO 1891-4, E25-013-4 (06/2018)
: Fasteners - Vocabulary - Part 4 : Control, inspection, delivery, acceptance and quality - Fixations - Terminologie - Partie 4 : Contrôles, livraisons, acceptations et qualité
6/1/2018 - Paper - English, French, German, Russian -
Learn More€98.00 -
NF EN ISO 888, E25-024 (06/2018)
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths
6/1/2018 - Paper - French -
Learn More€46.55 -
NF EN ISO 898-3, E25-500 (06/2018)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3 : flat washers with specified property classes
6/1/2018 - Paper - French -
Learn More€75.50 -
NF EN 14399-10, E25-801-10 (05/2018)
High-strength structural bolting assemblies for preloading - Part 10 : system HRC - Bolt and nut assemblies with calibrated preload
5/1/2018 - Paper - French -
Learn More€86.50 -
NF EN 14399-9, E25-801-9 (05/2018)
High-strength structural bolting assemblies for preloading - Part 9 : system HR or HV - Direct tension indicators for bolt and nut assemblies
5/1/2018 - Paper - French -
Learn More€86.50 -
€86.50
-
FD P06-029 (12/2017)
Earthquake-resistant construction rules - Design of anchorages in earthquake zones
12/1/2017 - Paper - French -
Learn More€144.67 -
NF E25-804 (04/2017)
Cup square long neck bolts, so-called Japy (bolts + nuts) - Product grade C - Symbol TRCC - Boulons à tête ronde et collet carré, dits "Japy" (vis + écrou) - Grade C - Symbole TRCC
4/1/2017 - Paper - French -
Learn More€60.67 -
€66.25
-
NF E25-803 (04/2017)
Square bolts (bolts + nuts) - Product grade C - Symbol Q - Boulons à tête carrée (vis + écrous) Grade C - Symbole Q
4/1/2017 - Paper - French -
Learn More€75.67 -
€48.00
-
NF E25-511 (04/2017)
Fasteners - Serrated conical washers for bolted joints - CS symbol
4/1/2017 - Paper - French -
Learn More€48.00 -
NF E25-537 (03/2017)
Fasteners - Serrated washers with external teeth for countersunk head
3/1/2017 - Paper - French -
Learn More€48.00 -
€48.00
-
NF E25-535 (03/2017)
Fasteners - Serrated washers internal teeth - Flat shape - Symbol DJC
3/1/2017 - Paper - French -
Learn More€48.00 -
NF E25-536 (03/2017)
Fasteners - Serrated washers with internal and external teeth - Flat shape - Symbol DD
3/1/2017 - Paper - French -
Learn More€48.00 -
NF E25-534 (03/2017)
Fasteners - Serrated washers with external teeth - Flat shape - Symbol DEC
3/1/2017 - Paper - French -
Learn More€48.00 -
€48.00
-
NF E25-015 (03/2017)
Fasteners - Bolting assemblies, bolts, screws and studs with ISO metric thread - Single shear test
3/1/2017 - Paper - French -
Learn More€60.67 -
€75.50
-
NF E25-533 (12/2016)
Fasteners - Plain washers and square washers for wood material - Product grade C
12/1/2016 - Paper - French -
Learn More€34.67 -
NF EN 15048-1, E25-802-1 (11/2016)
Non-preloaded structural bolting assemblies - Part 1 : general requirements
11/1/2016 - Paper - French -
Learn More€86.67 -
NF EN 15048-2, E25-802-2 (10/2016)
Non-preloaded structural bolting assemblies - Part 2 : fitness for purpose
10/1/2016 - Paper - French -
Learn More€60.67 -
NF EN ISO 4759-3, E25-501 (09/2016)
Tolerances for fasteners - Part 3 : washers for bolts, screws and nuts - Product grades A, C and F - Tolérances pour fixation - Partie 3 : rondelles pour vis et écrous - Grades A, C et F
9/1/2016 - Paper - French -
Learn More€60.67 -
NF EN ISO 2320, E25-408 (03/2016)
Fastereners - Prevailing torque type steel nuts - Functional properties - Fkixations - Écrous autofreinés en acier - Caractéristiques mécaniques et performances
3/1/2016 - Paper - French -
Learn More€86.50 -
NF E25-016 (08/2015)
Fasteners - Hexagon and square products - Dimensions of external widths across flats
8/1/2015 - Paper - French -
Learn More€34.67 -
NF EN 14399-3, E25-801-3 (05/2015)
High-strength structural bolting assemblies for preloading - Part 3 : system HR - Hexagon bolt and nut assemblies
5/1/2015 - Paper - French -
Learn More€86.50 -
NF EN 14399-5, E25-801-5 (05/2015)
High-strength structural bolting assemblies for preloading - Part 5 : plain washers
5/1/2015 - Paper - French -
Learn More€48.00 -
NF EN 14399-1, E25-801-1 (05/2015)
High-strength structural bolting assemblies for preloading - Part 1 : general requirements
5/1/2015 - Paper - French -
Learn More€86.50 -
NF EN 14399-2, E25-801-2 (05/2015)
High-strength structural bolting assemblies for preloading - Part 2 : suitability for preloading
5/1/2015 - Paper - French -
Learn More€75.67 -
NF EN 14399-4, E25-801-4 (05/2015)
High-strength structural bolting assemblies for preloading - Part 4 : system HV - Hexagon bolt and nut assemblies
5/1/2015 - Paper - French -
Learn More€68.50 -
NF EN 14399-6, E25-801-6 (05/2015)
High-strength structural bolting assemblies for preloading - Part 6 : plain chamfered washers
5/1/2015 - Paper - French -
Learn More€48.00 -
€60.50
-
NF EN ISO 1891-2, E25-013-2 (12/2014)
Fasteners - Terminology - Part 2 : vocabulary and definitions for coatings - Fixations
12/1/2014 - Paper - English, French, Russian -
Learn More€131.00 -
NF E25-136 (11/2014)
Fasteners - Threaded rods and threaded ends - Product grades A and B
11/1/2014 - Paper - French -
Learn More€75.67 -
NF E25-460 (09/2014)
Fasteners - Self locking counter nuts - Fixations - Écrous élastiques en tôle (écrous Pal)
9/1/2014 - Paper - French -
Learn More€48.00 -
€48.00
-
NF E25-030-2 (08/2014)
Fasteners - Threaded connections with ISO metric thread - Part 2 : design rules for tensile loaded bolted joints - Complete procedure - Fixations
8/1/2014 - Paper - French -
Learn More€167.33 -
NF E25-030-1 (08/2014)
Fasteners - Threaded connections with ISO metric thread - Part 1 : design rules for tensile loaded bolted joints - Simplified procedure - Fixations
8/1/2014 - Paper - French -
Learn More€99.33 -
NF EN 10269, A35-558 (12/2013)
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
12/1/2013 - Paper - French -
Learn More€119.00 -
NF EN ISO 14582, E25-107 (11/2013)
Fasteners - Hexalobular socket countersunk head screws, high head
11/1/2013 - Paper - French -
Learn More€44.97 -
NF E25-039 (08/2013)
Fasteners - Torque/clamp force for screws, nuts and prevailing torque type nuts - Additions to NF EN ISO 16047 and NF EN ISO 2320 standards - Fixations
8/1/2013 - Paper - French -
Learn More€75.67 -
NF EN ISO 898-1, E25-100-1 (05/2013)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
5/1/2013 - Paper - French -
Learn More€130.67 -
NF EN ISO 4034, E25-402 (03/2013)
Hexagon regular nuts (style 1) - Product grade C - Écrous hexagonaux
3/1/2013 - Paper - French -
Learn More€48.00 -
NF EN ISO 10511, E25-412 (03/2013)
Prevailing torque type hexagon thin nuts (with non-metallic insert)
3/1/2013 - Paper - French -
Learn More€44.97 -
NF EN ISO 16047/A1, E25-036/A1 (01/2013)
Fasteners - Torque/clamp force testing - Amendment 1 - Éléments de fixation
1/1/2013 - Paper - French -
Learn More€25.67 -
NF EN ISO 898-5, E25-100-5 (08/2012)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5 : set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
8/1/2012 - Paper - French -
Learn More€75.50 -
NF EN ISO 4753, E25-019 (01/2012)
Fasteners - Ends of parts with external ISO metric thread - Éléments de fixation
1/1/2012 - Paper - French -
Learn More€48.00 -
NF EN 13411-8, A47-251-8 (12/2011)
Terminations for steel wire ropes - Safety - Part 8 : swage terminals and swaging - Terminaisons pour câbles en acier
12/1/2011 - Paper - French -
Learn More€60.50 -
€60.67
-
NF EN ISO 1580, E25-128 (11/2011)
Slotted pan head screws - Product grade A - Vis à métaux à tête cylindrique large fendue
11/1/2011 - Paper - French -
Learn More€48.00 -
NF EN ISO 2009, E25-123 (11/2011)
Slotted countersunk flat head screws - Product grade A - Vis à métaux à tête fraisée fendue
11/1/2011 - Paper - French -
Learn More€48.00 -
NF EN ISO 7045, E25-121 (11/2011)
Pan head screws with type H or type Z cross recess - Product grade A - Vis à métaux à tête cylindrique bombée large à empreinte cruciforme de type H ou de type Z
11/1/2011 - Paper - French -
Learn More€48.00 -
€48.00
-
NF EN ISO 1207, E25-127 (10/2011)
Slotted cheese head screws - Product grade A - Vis à métaux à tête cylindrique fendue
10/1/2011 - Paper - French -
Learn More€48.00 -
€48.00
-
NF EN ISO 225, E25-002 (12/2010)
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions - Éléments de fixation
12/1/2010 - Paper - French -
Learn More€118.00 -
NF ISO 1891, E25-013 (11/2010)
Fasteners - Terminology - Éléments de fixation
11/1/2010 - Paper - English, French, Russian -
Learn More€168.00 -
NF E27-191 (08/2010)
Tools for pressing and moulding - Fasteners - Shouldered retaining screws - Outillage de presse et de moulage
8/1/2010 - Paper - French -
Learn More€48.00 -
€34.67
-
NF EN ISO 3506-4, E25-651 (01/2010)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws
1/1/2010 - Paper - French -
Learn More€75.67 -
NF EN ISO 3506-3, E25-100-8 (01/2010)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3 : set screws and similar fasteners not under tensile stress
1/1/2010 - Paper - French -
Learn More€75.67 -
NF EN 14566/IN1, P72-608/IN1 (11/2009)
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods - Fixations mécaniques pour systèmes en plaques de plâtre
11/1/2009 - Paper - French -
Learn More€22.50 -
NF EN 14566+A1, P72-608 (11/2009)
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods - Fixations mécaniques pour systèmes en plaques de plâtre
11/1/2009 - Paper - French -
Learn More€86.67 -
NF EN ISO 8752, E25-773 (08/2009)
Spring-type straight pins - Slotted, heavy duty - Goupilles cylindriques creuses, dites goupilles élastiques
8/1/2009 - Paper - French -
Learn More€43.50 -
NF E25-516 (06/2009)
Single coil spring washers - Small serie - Symbol WZ - Rondelles Grower
6/1/2009 - Paper - French -
Learn More€34.67 -
NF E25-517 (06/2009)
Single coil spring washers - Strong serie - Symbol WL - Rondelles Grower
6/1/2009 - Paper - French -
Learn More€34.67 -
NF E25-515 (06/2009)
Single coil spring washers - Standard series - Symbol W - Rondelles Grower
6/1/2009 - Paper - French -
Learn More€48.00 -
NF EN 13411-6+A1, A47-251-6 (12/2008)
Terminations for steel wire ropes - Safety - Part 6 : asymmetric wedge socket - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€75.67 -
NF EN 13411-1/IN1, A47-251-1/IN1 (12/2008)
Terminations for steel wire ropes - Safety - Part 1 : thimbles for steel wire rope slings - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€25.67 -
NF EN 13411-1+A1, A47-251-1 (12/2008)
Terminations for steel wire ropes - Safety - Part 1 : thimbles for steel wire rope slings - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€48.00 -
NF EN 13411-5/IN1, A47-251-5/IN1 (12/2008)
Terminations for steel wire ropes - Safety - Part 5 : U-bolt wire rope grips - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€25.67 -
NF EN 13411-5+A1, A47-251-5 (12/2008)
Terminations for steel wire ropes - Safety - Part 5 : U-bolt wire rope grips - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€75.67 -
NF EN 13411-2/IN1, A47-251-2/IN1 (12/2008)
Terminations for steel wire ropes - Safety - Part 2 : splicing of eyes for wire rope slings - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€25.67 -
NF EN 13411-2+A1, A47-251-2 (12/2008)
Terminations for steel wire ropes - Safety - Part 2 : splicing of eyes for wire rope slings - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€48.00 -
NF EN 13411-6/IN1, A47-251-6/IN1 (12/2008)
Terminations for steel wire ropes - Safety - Part 6 : asymmetric wedge socket - Terminaisons pour câbles en acier
12/1/2008 - Paper - French -
Learn More€25.67 -
NF E25-130 (07/2008) (R2013)
Bolt and washer assemblies - Conical static captive washer - Product grade A - Vis à métaux à rondelle imperdable
7/1/2008 - Paper - French -
Learn More€48.00 -
NF E29-041 (07/2006) (R2011)
Industrial pipework - Reduced shank bolts - Specifications - Tuyauterie industrielle
7/1/2006 - Paper - French -
Learn More€48.00 -
NF E25-017 (03/2006) (R2011)
Fasteners - Counterbores for bolts and screws - Dimensions - Éléments de fixation
3/1/2006 - Paper - French -
Learn More€34.67 -
NF EN 1515-3, E29-042-3 (12/2005)
Flanges and their joints - Bolting - Part 3 : classification of bolt materials for steel flanges, Class designated - Brides et leurs assemblages
12/1/2005 - Paper - French -
Learn More€46.55 -
NF EN ISO 16047, E25-036 (06/2005)
Fasteners - Torque/clamp force testing - Eléments de fixation
6/1/2005 - Paper - French -
Learn More€75.50 -
NF EN ISO 15065, E25-012 (05/2005)
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
5/1/2005 - Paper - French -
Learn More€48.00 -
NF EN ISO 10684, E25-041 (12/2004)
Fasteners - Hot dip galvanized coatings - Éléments de fixation
12/1/2004 - Paper - French -
Learn More€86.50 -
€75.67
-
€60.50
-
€60.50
-
NF EN ISO 4759-1, E25-022-1 (01/2001)
Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C - Tolérances des éléments de fixation
1/1/2001 - Paper - French -
Learn More€154.50 -
NF EN ISO 7089, E25-526 (10/2000)
Plain washers - Normal series - Product grade A - Rondelles plates
10/1/2000 - Paper - French -
Learn More€60.67 -
NF EN ISO 7093-2, E25-531 (10/2000)
Plain washers - Large series - Part 2 : product grade C - Rondelles plates
10/1/2000 - Paper - French -
Learn More€60.50 -
NF EN ISO 7094, E25-532 (10/2000)
Plain washers - Extra large series - Product grade C - Rondelles plates
10/1/2000 - Paper - French -
Learn More€60.50 -
NF EN ISO 7092, E25-529 (10/2000)
Plain washers - Small series - Product grade A - Rondelles plates
10/1/2000 - Paper - French -
Learn More€60.50 -
NF EN ISO 7093-1, E25-530 (10/2000)
Plain washers - Large series - Part 1 : product grade A - Rondelles plates
10/1/2000 - Paper - French -
Learn More€60.50 -
NF EN ISO 7091, E25-528 (10/2000)
Plain washers - Normal series - Product grade C - Rondelles plates
10/1/2000 - Paper - French -
Learn More€60.50 -
€60.50
-
NF EN ISO 15330, E25-010 (11/1999)
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method - Éléments de fixation
11/1/1999 - Paper - French -
Learn More€86.67 -
€60.50
-
€60.50
-
€60.50
-
€60.50
-
NF EN ISO 2338, E25-751 (12/1997) (R2002)
Parallel pins, of unhardened steel and austenitic stainless steel.
12/1/1997 - Paper - French -
Learn More€60.67 -
NF EN ISO 8734, E25-756 (12/1997) (R2002)
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).
12/1/1997 - Paper - French -
Learn More€60.50 -
NF EN 1665, E25-505 (09/1997)
Hexagon bolts with flange - Heavy series - Vis à tête hexagonale à embase cylindro-tronconique
9/1/1997 - Paper - French -
Learn More€78.50 -
FD E20-012 (02/1996) (R2011)
Household economy. Widths across flats for parts used for the mounting, tightening of controlling of equipment intended for gaseous fuel fired internal installations. - Économie domestique
2/1/1996 - Paper - French -
Learn More€48.00 -
NF EN 20898-7, E25-100-7 (05/1995) (R2001)
Mechanical properties of fasteners. Part 7 : torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm.
5/1/1995 - Paper - French -
Learn More€60.50 -
€86.50
-
NF F05-008 (12/1993) (R2013)
Railway fixed equipment. Tee-head bolts. - Installations fixes ferroviaires
12/1/1993 - Paper - French -
Learn More€48.00 -
NF F05-006 (12/1993) (R2013)
Railway fixed equipment. Triangle head bolts. - Installations fixes ferroviaires
12/1/1993 - Paper - French -
Learn More€48.00 -
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
NF EN 26157-1, E25-100-3 (06/1992) (R2002)
Fasteners. Surface discontinuities. Part 1 : bolts, screws and studs for general requirements. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€86.50 -
NF EN 28839, E25-011 (06/1992) (R2002)
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals. - Caractéristiques mécaniques des éléments de fixation
6/1/1992 - Paper - French -
Learn More€60.50 -
NF EN 26157-3, E25-100-4 (06/1992) (R2002)
Fasteners. Surface discontinuties. Part 3 : bolts, screw and studs for special requirements. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€75.50 -
NF EN 20273, E25-023 (06/1992) (R2002)
Fasteners. Clearance hole for bolts and screws. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€60.50 -
NF EN 27721, E25-018 (06/1992)
Fasteners. Countersunk head screws. Head configuration and gauging. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€75.50 -
NF E27-853 (09/1989)
Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications. - Colliers de serrage métalliques à usage général
9/1/1989 - Paper - French -
Learn More€75.67 -
NF E27-851 (09/1988)
General purpose metallic hose clamps. Perforated strip screw type. Specifications. - Colliers de serrage métalliques à usage général
9/1/1988 - Paper - French -
Learn More€60.67