21.060.50 : Pins, nails
-
ASTM F1575/F1575M-24 + Redline
Standard Test Method for Determining Bending Yield Moment of Nails, Spikes, and Dowel-type Threaded Fasteners
2/1/2024 - PDF - English -
Learn More€71.00 -
ASTM F1575/F1575M-24
Standard Test Method for Determining Bending Yield Moment of Nails, Spikes, and Dowel-type Threaded Fasteners
2/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN ISO 8745:2024-01
Fasteners - Taper grooved pins - Half-length progressive grooves (ISO/DIS 8745:2023), German and English version prEN ISO 8745:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
DIN EN ISO 8741:2024-01
Fasteners - Reverse-taper grooved pins - Half-length progressive grooves (ISO/DIS 8741:2023), German and English version prEN ISO 8741:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
DIN EN ISO 8746:2024-01
Fasteners - Grooved pins with round head - Full-length diamond grooves (ISO/DIS 8746:2023), German and English version prEN ISO 8746:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
PR NF EN ISO 13672, E25-778PR (01/2024)
Fixations - Goupilles cannelées constantes - Cannelures diamant sur la moitié de la longueur
1/1/2024 - Paper - English, French -
Learn More€64.50 -
DIN EN ISO 8747:2024-01
Fasteners - Grooved pins with countersunk head - Full-length diamond grooves (ISO/DIS 8747:2023), German and English version prEN ISO 8747:2023
1/1/2024 - PDF - English, German -
Learn More€65.89 -
DIN EN ISO 13672:2024-01
Fasteners - Parallel grooved pins - Half-length diamond grooves (ISO/DIS 13672:2023), German and English version prEN ISO 13672:2023
1/1/2024 - PDF - English, German -
Learn More€65.89 -
PR NF EN ISO 13669, E25-776PR (01/2024)
Fixations - Goupilles cannelées - Exigences générales
1/1/2024 - Paper - English, French -
Learn More€80.50 -
DIN EN ISO 8742:2024-01
Fasteners - Grooved pins - One-third-length center grooves (ISO/DIS 8742:2023), German and English version prEN ISO 8742:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
DIN EN ISO 8744:2024-01
Fasteners - Taper grooved pins - Full-length progressive grooves (ISO/DIS 8744:2023), German and English version prEN ISO 8744:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
PR NF EN ISO 8739, E25-761PR (01/2024)
Fixations - Goupilles cannelées constantes, à bout pilote - Cannelures diamant sur toute la longueur
1/1/2024 - Paper - English, French -
Learn More€64.50 -
DIN EN ISO 8740:2024-01
Fasteners - Parallel grooved pins, with chamfer point - Full-length diamond grooves (ISO/DIS 8740:2023), German and English version prEN ISO 8740:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
DIN EN ISO 8743:2024-01
Fasteners - Grooved pins - Half-length center grooves (ISO/DIS 8743:2023), German and English version prEN ISO 8743:2023
1/1/2024 - PDF - English, German -
Learn More€72.80 -
PR NF EN ISO 13670, E25-777PR (01/2024)
Fixations - Goupilles cannelées inversées - Cannelures progressives sur un quart de la longueur à chaque extrémité
1/1/2024 - Paper - English, French -
Learn More€64.50 -
DIN EN ISO 13669:2024-01
Fasteners - Grooved pins - General requirements (ISO/DIS 13669:2023), German and English version prEN ISO 13669:2023
1/1/2024 - PDF - English, German -
Learn More€92.62 -
DIN EN ISO 13670:2024-01
Fasteners - Reverse-taper grooved pins - One quarter-length progressive grooves on both sides (ISO/DIS 13670:2023), German and English version prEN ISO 13670:2023
1/1/2024 - PDF - English, German -
Learn More€65.89 -
DIN EN ISO 8739:2023-12
Fasteners - Parallel grooved pins, with pilot point - Full-length diamond grooves (ISO/DIS 8739:2023), German and English version prEN ISO 8739:2023
12/1/2023 - PDF - English, German -
Learn More€72.80 -
23/30456731 DC:2023
BS EN ISO 13669 Fasteners - Grooved pins - General requirements
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30468596 DC:2023
BS EN ISO 8741 Fasteners - Reverse-taper grooved pins - Half-length progressive grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30468608 DC:2023
BS EN ISO 8744 Fasteners - Taper grooved pins - Full-length progressive grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30456735 DC:2023
BS EN ISO 13670 Fasteners - Reverse-taper grooved pins - One quarter-length progressive grooves on both sides
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30468600 DC:2023
BS EN ISO 8742 Fasteners - Grooved pins - One-third-length center grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30468592 DC:2023
ISO 8740 Fasteners. Parallel grooved pins, with chamfer point. Full-length diamond grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30468612 DC:2023
BS EN ISO 8745 Fasteners - Taper grooved pins - Half-length progressive grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30456739 DC:2023
BS EN ISO 13672 Fasteners - Parallel grooved pins - Half-length diamond grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30468604 DC:2023
BS EN ISO 8743 Fasteners - Grooved pins - Half-length center grooves
11/30/2023 - PDF - English -
Learn More€24.00 -
23/30472850 DC:2023
BS EN ISO 8746 Fasteners. Grooved pins with round head - Full-length diamond grooves
11/29/2023 - PDF - English -
Learn More€24.00 -
23/30472854 DC:2023
BS EN ISO 8747 Fasteners - Grooved pins with countersunk head - Full-length diamond grooves
11/29/2023 - PDF - English -
Learn More€24.00 -
23/30468588 DC:2023
BS EN ISO 8739. Fasteners. Parallel grooved pins, with pilot point. Full-length diamond grooves
11/27/2023 - PDF - English -
Learn More€24.00 -
ASTM F547-22
Standard Terminology of Nails for Use with Wood and Wood-Base Materials
6/1/2022 - PDF - English -
Learn More€57.00 -
ASTM F547-22 + Redline
Standard Terminology of Nails for Use with Wood and Wood-Base Materials
6/1/2022 - PDF - English -
Learn More€68.00 -
€51.00
-
€61.00
-
ASME B18.8.2-2020
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
1/1/2020 - PDF DRM - English -
Learn More€51.00 -
DIN EN ISO 8734:2019-05
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) (ISO 8734:1997), German version EN ISO 8734:1997
5/1/2019 - PDF - German -
Learn More€52.90 -
€37.00
-
€36.27
-
€0.00
-
€57.57
-
€45.98
-
€66.07
-
€52.90
-
€25.00
-
€25.00
-
€25.00
-
UNE-EN ISO 13337:2010
Spring-type straight pins. Slotted, light duty (ISO 13337:2009)
7/21/2010 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 8752:2010
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
7/21/2010 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 13337:2010
Spring-type straight pins. Slotted, light duty (ISO 13337:2009)
7/21/2010 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8752:2010
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
7/21/2010 - PDF - Spanish -
Learn More€52.00 -
€0.00
-
DIN EN ISO 13337:2009-10
Spring-type straight pins - Slotted, light duty (ISO 13337:2009), German version EN ISO 13337:2009
10/1/2009 - PDF - German -
Learn More€52.90 -
DIN EN ISO 8752:2009-10
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009), German version EN ISO 8752:2009
10/1/2009 - PDF - German -
Learn More€52.90 -
DIN EN ISO 13337:2009-10
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
10/1/2009 - PDF - English -
Learn More€66.07 -
DIN EN ISO 8752:2009-10
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
10/1/2009 - PDF - English -
Learn More€66.07 -
NBN EN ISO 13337:2009
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
9/11/2009 - PDF - French -
Learn More€37.00 -
NBN EN ISO 8752:2009
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
9/11/2009 - PDF - German -
Learn More€37.00 -
NBN EN ISO 13337:2009
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
9/11/2009 - PDF - German -
Learn More€37.00 -
NBN EN ISO 8752:2009
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
9/11/2009 - PDF - English -
Learn More€37.00 -
NBN EN ISO 8752:2009
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
9/11/2009 - PDF - French -
Learn More€37.00 -
NBN EN ISO 13337:2009
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
9/11/2009 - PDF - English -
Learn More€37.00 -
NF EN ISO 8752, E25-773 (08/2009)
Spring-type straight pins - Slotted, heavy duty - Goupilles cylindriques creuses, dites goupilles élastiques
8/1/2009 - Paper - French -
Learn More€43.50 -
€151.00
-
€151.00
-
BS EN ISO 12777-1:1996+A1:2008
Methods of test for pallet joints Determination bending resistance nails, other dowel-type fasteners and staples
7/31/2009 - PDF - English -
Learn More€151.00 -
€36.27
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
DIN EN ISO 12777-1:2009-03
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994 + Amd 1:2008), German version EN ISO 12777-1:1996 + A1:2008
3/1/2009 - PDF - German -
Learn More€65.89 -
DIN EN ISO 12777-1:2009-03
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994 + Amd 1:2008) (includes Amendment A1:2008)
3/1/2009 - PDF - English -
Learn More€82.52 -
€57.29
-
€0.00
-
UNE-EN ISO 8751:2008
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
1/16/2008 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8750:2008
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
1/16/2008 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8748:2008
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
1/16/2008 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8751:2008
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
1/16/2008 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 8750:2008
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
1/16/2008 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 8748:2008
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
1/16/2008 - PDF - English -
Learn More€62.40 -
€52.00
-
NBN EN ISO 8748:2007
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
9/12/2007 - PDF - English -
Learn More€37.00 -
NBN EN ISO 8751:2007
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
9/12/2007 - PDF - German -
Learn More€37.00 -
NBN EN ISO 8748:2007
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
9/12/2007 - PDF - French -
Learn More€37.00 -
NBN EN ISO 8750:2007
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
9/12/2007 - PDF - English -
Learn More€37.00 -
NBN EN ISO 8750:2007
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
9/12/2007 - PDF - French -
Learn More€37.00 -
NBN EN ISO 8751:2007
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
9/12/2007 - PDF - English -
Learn More€37.00 -
NBN EN ISO 8748:2007
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
9/12/2007 - PDF - German -
Learn More€37.00 -
NBN EN ISO 8751:2007
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
9/12/2007 - PDF - French -
Learn More€37.00 -
NBN EN ISO 8750:2007
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
9/12/2007 - PDF - German -
Learn More€37.00 -
€151.00
-
€151.00
-
€151.00
-
DIN EN ISO 8748:2007-07
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007
7/1/2007 - PDF - English -
Learn More€57.57 -
DIN EN ISO 8751:2007-07
Spring-type straight pins - Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007
7/1/2007 - PDF - German -
Learn More€45.98 -
DIN EN ISO 8750:2007-07
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007
7/1/2007 - PDF - German -
Learn More€45.98 -
DIN EN ISO 8748:2007-07
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007
7/1/2007 - PDF - German -
Learn More€45.98 -
DIN EN ISO 8751:2007-07
Spring-type straight pins - Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007
7/1/2007 - PDF - English -
Learn More€57.57 -
DIN EN ISO 8750:2007-07
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007
7/1/2007 - PDF - English -
Learn More€57.57 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€25.00
-
€25.00
-
€25.00
-
ASTM C514-04(2020)
Standard Specification for Nails for the Application of Gypsum Board
1/1/2004 - PDF - English -
Learn More€46.00 -
ASTM C514-04(2020) + Redline
Standard Specification for Nails for the Application of Gypsum Board
1/1/2004 - PDF - English -
Learn More€53.00 -
DIN EN ISO 12777-3:2003-06
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002); German version EN ISO 12777-3:2002
6/1/2003 - PDF - English -
Learn More€91.12 -
DIN EN ISO 12777-3:2003-06
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002); German version EN ISO 12777-3:2002
6/1/2003 - PDF - German -
Learn More€72.80 -
€180.00
-
BS EN ISO 12777-2:2000
Methods of test for pallet joints Determination withdrawal and head pull-through resistance nails staples
8/15/2000 - PDF - English -
Learn More€180.00 -
DIN EN ISO 12777-2:2000-07
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000), English version of DIN EN ISO 12777-2
7/1/2000 - PDF - English -
Learn More€66.07 -
DIN EN ISO 12777-2:2000-07
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000), German Version EN ISO 12777-2:2000
7/1/2000 - PDF - German -
Learn More€52.90 -
UNE-EN 10230-1:2000 (R2021)
Steel wire nails - Part 1: Loose nails for general applications
6/28/2000 - PDF - English -
Learn More€84.00 -
UNE-EN 10230-1:2000 (R2021)
Steel wire nails - Part 1: Loose nails for general applications
6/28/2000 - PDF - Spanish -
Learn More€70.00 -
NBN EN 10230-1:2000
Steel wire nails - Part 1: Loose nails for general applications
1/17/2000 - PDF - English -
Learn More€37.00 -
NBN EN 10230-1:2000
Steel wire nails - Part 1: Loose nails for general applications
1/17/2000 - PDF - French -
Learn More€37.00 -
NBN EN 10230-1:2000
Steel wire nails - Part 1: Loose nails for general applications
1/17/2000 - PDF - German -
Learn More€37.00 -
€250.00
-
DIN EN 10230-1:2000-01
Steel wire nails - Part 1: Loose nails for general applications
1/1/2000 - PDF - English -
Learn More€107.48 -
ASME B18.8.2-2000 (R2010)
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
1/1/2000 - PDF DRM - English -
Learn More€43.00 -
DIN EN 10230-1:2000-01
Steel wire nails - Part 1: Loose nails for general applications, German version EN 10230-1:1999
1/1/2000 - PDF - German -
Learn More€85.79 -
€0.00
-
UNE-EN ISO 2338:1998 ERRATUM (R2008)
PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL. (ISO 2338:1997).
7/22/1998 - PDF - Spanish -
Learn More€0.00 -
€46.00
-
€55.20
-
€46.00
-
€55.20
-
€151.00
-
BS EN ISO 8734:1998
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
5/15/1998 - PDF - English -
Learn More€151.00 -
€151.00
-
€151.00
-
€151.00
-
€151.00
-
BS EN ISO 2338:1998
Parallel pins of unhardened steel and austenitic stainless steel
5/15/1998 - PDF - English -
Learn More€151.00 -
€151.00
-
BS EN ISO 8733:1998
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel
5/15/1998 - PDF - English -
Learn More€151.00 -
BS EN ISO 8735:1998
Parallel pins with internal thread, of hardened steel or martensitic stainless steel
5/15/1998 - PDF - English -
Learn More€151.00 -
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€55.20
-
€55.20
-
UNE-EN ISO 2338:1998 (R2008)
PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENIC STAINLESS STEEL. (ISO 2338:1997).
5/7/1998 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 2338:1998 (R2008)
PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENIC STAINLESS STEEL. (ISO 2338:1997).
5/7/1998 - PDF - English -
Learn More€55.20 -
€46.00
-
€46.00
-
€46.00
-
UNE-EN ISO 8740:1998 (R2008)
GROOVED PINS. FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER. (ISO 8740:1997).
4/30/1998 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 8734:1998 (R2008)
PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS). (ISO 8734:1997).
4/30/1998 - PDF - Spanish -
Learn More€46.00 -
€55.20
-
UNE-EN ISO 8733:1998 (R2008)
PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL. (ISO 8733:1997).
4/30/1998 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 8741:1998 (R2008)
GROOVED PINS. HALF-LENGTH REVERSE-TAPER GROOVED. (ISO 8741:1997).
4/30/1998 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8734:1998 (R2008)
PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS). (ISO 8734:1997).
4/30/1998 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 8740:1998 (R2008)
GROOVED PINS. FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER. (ISO 8740:1997).
4/30/1998 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8733:1998 (R2008)
PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL. (ISO 8733:1997).
4/30/1998 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 8741:1998 (R2008)
GROOVED PINS. HALF-LENGTH REVERSE-TAPER GROOVED. (ISO 8741:1997).
4/30/1998 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 8735:1998 (R2008)
PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL. (ISO 8735:1997).
4/20/1998 - PDF - Spanish -
Learn More€52.00 -
€46.00
-
UNE-EN ISO 8739:1998 (R2008)
GROOVED PINS. FULL-LENGTH PARALLEL GROOVED, WITH PILOT. (ISO 8739:1997).
4/20/1998 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 8742:1998 (R2008)
GROOVED PINS. ONE-THIRD-LENGTH CENTRE GROOVED. (ISO 8742:1997).
4/20/1998 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 8735:1998 (R2008)
PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL. (ISO 8735:1997).
4/20/1998 - PDF - English -
Learn More€62.40 -
€55.20
-
UNE-EN ISO 8742:1998 (R2008)
GROOVED PINS. ONE-THIRD-LENGTH CENTRE GROOVED. (ISO 8742:1997).
4/20/1998 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 8739:1998 (R2008)
GROOVED PINS. FULL-LENGTH PARALLEL GROOVED, WITH PILOT. (ISO 8739:1997).
4/20/1998 - PDF - Spanish -
Learn More€52.00 -
DIN EN ISO 8733:1998-03
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8739:1998-03
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8742:1998-03
Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8744:1998-03
Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8747:1998-03
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8735:1998-03
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997
3/1/1998 - PDF - English -
Learn More€57.57 -
DIN EN ISO 8741:1998-03
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8743:1998-03
Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8746:1998-03
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8733:1998-03
Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8740:1998-03
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8742:1998-03
Grooved pins - One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8745:1998-03
Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8747:1998-03
Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8739:1998-03
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8741:1998-03
Grooved pins - Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8744:1998-03
Grooved pins - Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8746:1998-03
Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8735:1998-03
Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997
3/1/1998 - PDF - German -
Learn More€45.98 -
DIN EN ISO 8740:1998-03
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 8743:1998-03
Grooved pins - Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997
3/1/1998 - PDF - German -
Learn More€39.35 -
DIN EN ISO 8745:1998-03
Grooved pins - Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997
3/1/1998 - PDF - English -
Learn More€49.16 -
DIN EN ISO 2338:1998-02
Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997
2/1/1998 - PDF - German -
Learn More€39.35 -
€45.98
-
DIN EN ISO 2338:1998-02
Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997
2/1/1998 - PDF - English -
Learn More€49.16 -
€57.57
-
€37.00
-
€37.00
-
€37.00
-
NBN EN ISO 2338:1998
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)
1/14/1998 - PDF - German -
Learn More€37.00 -
€37.00