21.060.40 : Rivets

Items 1 to 200 of 271 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • ASTM F3329-18

    Standard Specification for Carbon and Alloy Steel Metric Rivets
    11/15/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • 18/30380447 DC:2018

    BS EN 6069. Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
    10/30/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN 675:2018-10

    Flat countersunk head rivets - Nominal diameters 3 mm to 5 mm
    10/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • SAE J 492:2016-11-23

    Guide for Rivet Selection and Design Consideration (Stabilized: Nov 2016)
    11/23/2016 - PDF - English - SAE
    Learn More
    €77.00

  • UNE-EN 6101:2016

    Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.)
    10/1/2016 - PDF - English - AENOR
    Learn More
    €57.00

  • UNE-EN 6081:2016

    Aerospace series - Rivet, universal head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.)
    10/1/2016 - PDF - English - AENOR
    Learn More
    €38.00

  • UNE-EN 6080:2016

    Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series (Endorsed by AENOR in October of 2016.)
    10/1/2016 - PDF - English - AENOR
    Learn More
    €46.00

  • ASTM B316/B316M-15

    Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
    10/1/2015 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM B316/B316M-15 + Redline

    Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
    10/1/2015 - PDF - English - ASTM
    Learn More
    €56.00

  • IFI-114:2015

    Break Mandrel Blind Rivets
    1/1/2015 - PDF sécurisé - English - IFI
    Learn More
    €62.56

  • IFI-116:2015

    Multi-Grip Break Mandrel Blind Rivets
    1/1/2015 - PDF sécurisé - English - IFI
    Learn More
    €62.56

  • IFI-134:2015

    Structural Positive Locking, Self-Plugging Blind Rivets
    1/1/2015 - PDF sécurisé - English - IFI
    Learn More
    €62.56

  • IFI-158:2015

    Standard for Bulbing Structural Blind Rivets
    1/1/2015 - PDF sécurisé - English - IFI
    Learn More
    €62.56

  • ASTM A31-14

    Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
    4/1/2014 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM A31-14 + Redline

    Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
    4/1/2014 - PDF - English - ASTM
    Learn More
    €48.00

  • NF EN ISO 12996, E83-200 (08/2013)

    Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints - Assemblage mécanique
    8/1/2013 - Paper - French - AFNOR
    Learn More
    €64.01

  • SAE AS 85188A:2013-03-15

    Riveter, Power, Pneumatic-Hydraulic Blind Rivet Installation (Stabilized: Mar 2013)
    3/15/2013 - PDF - English - SAE
    Learn More
    €77.00

  • DIN 6791:2012-05

    Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm
    5/1/2012 - - - DIN
    Learn More
    From: €54.80

  • JASO F206:2012

    Blind rivets
    1/1/2012 - - - JSAE
    Learn More
    €39.00

  • DIN 660:2012-01

    Round head rivets - Nominal diameters 1 mm to 8 mm
    1/1/2012 - - - DIN
    Learn More
    From: €54.80

  • DIN 660:2012-01

    Round head rivets - Nominal diameters 1 mm to 8 mm
    1/1/2012 - - - DIN
    Learn More
    From: €54.80

  • NF E25-726 (12/2011)

    Fasteners - Structural round head plain rivets - Fixations
    12/1/2011 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN 302:2011-03

    Countersunk head rivets - Nominal diameters 10 mm to 36 mm
    3/1/2011 - - - DIN
    Learn More
    From: €68.30

  • DIN 124:2011-03

    Steel round head rivets - Nominal diameters from 10 mm to 36 mm
    3/1/2011 - - - DIN
    Learn More
    From: €68.30

  • DIN 661:2011-03

    Countersunk head rivets - Nominal diameters 1 mm to 8 mm
    3/1/2011 - - - DIN
    Learn More
    From: €54.80

  • DIN 662:2011-03

    Mushroom head rivets - Nominal diameters 1,6 mm to 6 mm
    3/1/2011 - - - DIN
    Learn More
    From: €54.80

  • DIN 674:2011-03

    Flat round head rivets - Nominal diameters 1,4 mm to 6 mm
    3/1/2011 - - - DIN
    Learn More
    From: €54.80

  • DIN 7331:2011-03

    Compression rivets
    3/1/2011 - - - DIN
    Learn More
    From: €40.80

  • DIN 7338:2011-03

    Rivets for brake linings and clutch linings
    3/1/2011 - - - DIN
    Learn More
    From: €54.80

  • DIN 7340:2011-03

    Tubular rivets cut from the tube
    3/1/2011 - - - DIN
    Learn More
    From: €54.80

  • DIN 101:2011-02

    Rivets - Technical specifications
    2/1/2011 - - - DIN
    Learn More
    From: €54.80

  • DIN EN ISO 15977:2011-02

    Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002); German version EN ISO 15977:2002
    2/1/2011 - - - DIN
    Learn More
    From: €61.70

  • DIN 7339:2011-02

    Hollow rivets, one piece, drawn from strip
    2/1/2011 - - - DIN
    Learn More
    From: €40.80

  • BS EN 6069:2009

    Aerospace series. Rivet, 100° reduced flush head, close tolerance. Inch series
    3/31/2010 - PDF - English - BSI
    Learn More
    €130.35

  • NBN EN 6069:2010

    Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
    1/22/2010 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 6069:2010

    Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
    1/22/2010 - PDF - English - NBN
    Learn More
    €45.00

  • UNE-EN 6069:2009 (R2018)

    Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series (Endorsed by AENOR in January of 2010.)
    1/1/2010 - PDF - English - AENOR
    Learn More
    €46.00

  • UNE-EN ISO 8751:2008

    Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
    1/16/2008 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 8751:2008

    Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
    1/16/2008 - PDF - English - AENOR
    Learn More
    €56.00

  • BS EN ISO 15978:2002

    Open end blind rivets with break pull mandrel and countersunk head. AIA/St
    11/29/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15979:2002

    Open end blind rivets with break pull mandrel and protruding head. St/St
    11/29/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15976:2002

    Closed end blind rivets with break pull mandrel and protruding head. St/St
    11/29/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15974:2001

    Closed and blind rivets with break pull mandrel and countersunk head. AIA/St
    11/24/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15982:2002

    Open end blind rivets with break pull mandrel and countersunk head. AIA/AIA
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15983:2002

    Open end blind rivets with break pull mandrel and protruding head. A2/A2
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15984:2002

    Open end blind rivets with break pull mandrel and countersunk head. A2/A2
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 16582:2002

    Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 16583:2002

    Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 16584:2002

    Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 16585:2002

    Closed end blind rivets with pull mandrel and protruding head. A2/SSt
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15980:2002

    Open end blind rivets with break pull mandrel and countersunk head. St/St
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15981:2002

    Open end blind rivets with break pull mandrel and protruding head. AIA/AIA
    11/23/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 14588:2001

    Blind rivets. Terminology and definitions
    11/22/2004 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN ISO 15973:2001

    Closed and blind rivets with break pull mandrel and protruding head. AIA/St
    11/22/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 15977:2002

    Open end blind rivets with break pull mandrel and protruding head. AIA/St
    11/22/2004 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 14589:2001

    Blind rivets. Mechanical testing
    11/22/2004 - PDF - English - BSI
    Learn More
    €215.67

  • JIS B 1087:2004 (R2013)

    Blind rivets - Mechanical testing
    3/20/2004 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0147:2004 (R2013)

    Blind rivets - Terminology and definitions
    3/20/2004 - PDF - Japanese - JSA
    Learn More
    €32.50

  • UNE-EN ISO 16582:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 16582:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 16585:2003 (R2008)

    Closed end blind rivets with pull mandrel and protruding head. A2/SSt (ISO 16585:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 16585:2003 (R2008)

    Closed end blind rivets with pull mandrel and protruding head. A2/SSt (ISO 16585:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 16583:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 16583:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 16584:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt (ISO 16584:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 16584:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. NiCu/St or NiCu/SSt (ISO 16584:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15975:2003 (R2008)

    Closed end blind rivets with break pull mandrel and protrudiing head. AI/AIA (ISO 15975:2002).
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 15975:2003 (R2008)

    Closed end blind rivets with break pull mandrel and protrudiing head. AI/AIA (ISO 15975:2002).
    7/11/2003 - PDF - English - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 15976:2003 (R2008)

    Closed end blind rivets with break pull mandrel and protruding head. St/St (ISO15976:2002).
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 15976:2003 (R2008)

    Closed end blind rivets with break pull mandrel and protruding head. St/St (ISO15976:2002).
    7/11/2003 - PDF - English - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 15977:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. AIA/St (ISO 15977:2001)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15977:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. AIA/St (ISO 15977:2001)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15978:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. AIA/St (ISO 15978:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15978:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. AIA/St (ISO 15978:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15980:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. St/St (ISO 15980:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15980:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. St/St (ISO 15980:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15981:2003 (R2008)

    Open end blind rivets with break pull mandrell and protruding head. AIA/AIA (ISO 15981:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15981:2003 (R2008)

    Open end blind rivets with break pull mandrell and protruding head. AIA/AIA (ISO 15981:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15982:2003

    Open end blind rivets with break pull mandrel and countersrunk head. AIA/AIA (ISO 15982:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15982:2003

    Open end blind rivets with break pull mandrel and countersrunk head. AIA/AIA (ISO 15982:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15983:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15983:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. A2/A2 (ISO 15983:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15984:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. A2/A2 (ISO 15984:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15984:2003 (R2008)

    Open end blind rivets with break pull mandrel and countersunk head. A2/A2 (ISO 15984:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 15979:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. St/St (ISO 15979:2002)
    7/11/2003 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 15979:2003 (R2008)

    Open end blind rivets with break pull mandrel and protruding head. St/St (ISO 15979:2002)
    7/11/2003 - PDF - English - AENOR
    Learn More
    €58.00

  • ASTM A502-03(2015)

    Standard Specification for Rivets, Steel, Structural
    7/10/2003 - PDF - English - ASTM
    Learn More
    €41.00

  • DIN EN ISO 15975:2003-04

    Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002
    4/1/2003 - - - DIN
    Learn More
    From: €40.80

  • DIN EN ISO 15976:2003-04

    Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002
    4/1/2003 - - - DIN
    Learn More
    From: €40.80

  • DIN EN ISO 15978:2003-04

    Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 15979:2003-04

    Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 15980:2003-04

    Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 15981:2003-04

    Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 15982:2003-04

    Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 15983:2003-04

    Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 15984:2003-04

    Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 16582:2003-04

    Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 16583:2003-04

    Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • DIN EN ISO 16585:2003-04

    Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002
    4/1/2003 - - - DIN
    Learn More
    From: €40.80

  • DIN EN ISO 16584:2003-04

    Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002
    4/1/2003 - - - DIN
    Learn More
    From: €47.60

  • NBN EN ISO 15982:2003

    Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15982:2003

    Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15982:2003

    Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15983:2003

    Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15983:2003

    Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15983:2003

    Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15984:2003

    Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15984:2003

    Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15984:2003

    Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15975:2003

    Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15975:2003

    Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15975:2003

    Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15976:2003

    Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15976:2003

    Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15976:2003

    Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15977:2003

    Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15977:2003

    Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15977:2003

    Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15978:2003

    Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15978:2003

    Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15978:2003

    Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15979:2003

    Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15979:2003

    Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15979:2003

    Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15980:2003

    Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15980:2003

    Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15980:2003

    Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 15981:2003

    Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 15981:2003

    Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 15981:2003

    Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 16582:2003

    Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 16582:2003

    Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 16582:2003

    Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 16583:2003

    Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 16583:2003

    Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 16583:2003

    Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 16584:2003

    Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 16584:2003

    Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 16584:2003

    Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 16585:2003

    Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
    2/14/2003 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 16585:2003

    Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
    2/14/2003 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 16585:2003

    Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
    2/14/2003 - PDF - French - NBN
    Learn More
    €45.00

  • NF EN ISO 15976, E25-713 (01/2003)

    Closed end blind rivets with break pull mandrel and protruding head - St/St
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15977, E25-714 (01/2003)

    Open end blind rivets with break pull mandrel and protruding head - AIA/St
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15978, E25-715 (01/2003)

    Open end blind rivets with break pull mandrel and countersunk head - AIA/St
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15979, E25-716 (01/2003)

    Open end blind rivets with break pull mandrel and protruding head - St/St
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15980, E25-717 (01/2003)

    Open end blind rivets with break pull mandrel and countersunk head - St/St
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15981, E25-718 (01/2003)

    Open end blind rivets with break pull mandrel and protruding head - AIA/AIA
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15982, E25-719 (01/2003)

    Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15983, E25-720 (01/2003)

    Open end blind rivets with break pull mandrel and protruding head - A2/A2
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15984, E25-721 (01/2003)

    Open end blind rivets with break pull mandrel and countersunk head - A2/A2
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 16582, E25-722 (01/2003)

    Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 16583, E25-723 (01/2003)

    Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 16584, E25-724 (01/2003)

    Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 16585, E25-725 (01/2003)

    Closed end blind rivets with pull mandrel and protruding head - A2/SSt
    1/1/2003 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS EN ISO 15975:2002

    Closed end blind rivets with break pull mandrel and protruding head. AI/AIA
    11/20/2002 - PDF - English - BSI
    Learn More
    €154.05

  • ISO 16582:2002

    Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 16582:2002

    Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 16583:2002

    Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 16583:2002

    Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 16584:2002

    Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 16584:2002

    Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 16585:2002

    Closed end blind rivets with pull mandrel and protruding head — A2/SSt
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 16585:2002

    Closed end blind rivets with pull mandrel and protruding head — A2/SSt
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15975:2002

    Closed end blind rivets with break pull mandrel and protruding head — AI/AIA
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15975:2002

    Closed end blind rivets with break pull mandrel and protruding head — AI/AIA
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15976:2002

    Closed end blind rivets with break pull mandrel and protruding head — St/St
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15976:2002

    Closed end blind rivets with break pull mandrel and protruding head — St/St
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15977:2002

    Open end blind rivets with break pull mandrel and protruding head — AIA/St
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15977:2002

    Open end blind rivets with break pull mandrel and protruding head — AIA/St
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15978:2002

    Open end blind rivets with break pull mandrel and countersunk head — AIA/St
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15978:2002

    Open end blind rivets with break pull mandrel and countersunk head — AIA/St
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15979:2002

    Open end blind rivets with break pull mandrel and protruding head — St/St
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15979:2002

    Open end blind rivets with break pull mandrel and protruding head — St/St
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15980:2002

    Open end blind rivets with break pull mandrel and countersunk head — St/St
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15980:2002

    Open end blind rivets with break pull mandrel and countersunk head — St/St
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15981:2002

    Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15981:2002

    Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15982:2002

    Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15982:2002

    Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15983:2002

    Open end blind rivets with break pull mandrel and protruding head — A2/A2
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15983:2002

    Open end blind rivets with break pull mandrel and protruding head — A2/A2
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 15984:2002

    Open end blind rivets with break pull mandrel and countersunk head — A2/A2
    11/1/2002 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 15984:2002

    Open end blind rivets with break pull mandrel and countersunk head — A2/A2
    11/1/2002 - Paper - French - ISO
    Learn More
    €40.00

  • UNE-EN ISO 15973:2002

    CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AIA/ST. (ISO 15973:2000).
    6/27/2002 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 15973:2002

    CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - AIA/ST. (ISO 15973:2000).
    6/27/2002 - PDF - English - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 14588:2002

    BLIND RIVETS - TERMINOLOGY AND DEFINITIONS. (ISO 14588:2000).
    4/29/2002 - PDF - Spanish - AENOR
    Learn More
    €53.00

  • UNE-EN ISO 14588:2002

    BLIND RIVETS - TERMINOLOGY AND DEFINITIONS. (ISO 14588:2000).
    4/29/2002 - PDF - English - AENOR
    Learn More
    €63.00

  • UNE-EN ISO 14589:2002

    BLIND RIVETS - MECHANICAL TESTING. (ISO 14589:2000).
    4/29/2002 - PDF - Spanish - AENOR
    Learn More
    €55.00

  • UNE-EN ISO 14589:2002

    BLIND RIVETS - MECHANICAL TESTING. (ISO 14589:2000).
    4/29/2002 - PDF - English - AENOR
    Learn More
    €66.00

  • UNE-EN ISO 15974:2002

    Closed end blind rivets with break pull mandrel and countersunk head. AIA/St. (ISO 15974:2000).
    4/29/2002 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 15974:2002

    Closed end blind rivets with break pull mandrel and countersunk head. AIA/St. (ISO 15974:2000).
    4/29/2002 - PDF - English - AENOR
    Learn More
    €56.00

  • NF EN ISO 14588, E25-700 (12/2001)

    Blind rivets - Terminology and definitions
    12/1/2001 - Paper - English, French - AFNOR
    Learn More
    €73.30

  • NF EN ISO 14589, E25-701 (12/2001)

    Blind rivets - Mechanical testing
    12/1/2001 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF EN ISO 15973, E25-710 (12/2001)

    Closed end blind rivets with break pull mandrel and protruding head - AIA/St
    12/1/2001 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF EN ISO 15974, E25-711 (12/2001)

    Closed and blind rivets with break pull mandrel and countersunk head - AIA/St
    12/1/2001 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN EN ISO 14588:2001-08

    Blind rivets - Terminology and definitions (ISO 14588:2000); German version EN ISO 14588:2000
    8/1/2001 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN ISO 14589:2001-08

    Blind rivets - Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000
    8/1/2001 - - - DIN
    Learn More
    From: €61.70

  • DIN EN ISO 15973:2001-08

    Closed end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15973:2000); German version EN ISO 15973:2000
    8/1/2001 - - - DIN
    Learn More
    From: €40.80

  • DIN EN ISO 15974:2001-08

    Closed end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15974:2000); German version EN ISO 15974:2000
    8/1/2001 - - - DIN
    Learn More
    From: €40.80

Items 1 to 200 of 271 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2