21.060.10 : Bolts, screws, studs
-
ISO 10666:1999 (R2019)
Drilling screws with tapping screw thread
Mechanical and functional properties
9/23/1999 - Paper - French - ISO
Learn More€72.00 -
ISO 10666:1999 (R2019)
Drilling screws with tapping screw thread
Mechanical and functional properties
9/23/1999 - Paper - English - ISO
Learn More€72.00 -
ISO 15481:1999 (R2019)
Cross recessed pan head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - French - ISO
Learn More€48.00 -
ISO 15482:1999 (R2019)
Cross recessed countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - French - ISO
Learn More€48.00 -
ISO 15483:1999 (R2019)
Cross recessed raised countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - French - ISO
Learn More€48.00 -
ISO 15481:1999 (R2019)
Cross recessed pan head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - English - ISO
Learn More€48.00 -
ISO 15482:1999 (R2019)
Cross recessed countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - English - ISO
Learn More€48.00 -
ISO 15483:1999 (R2019)
Cross recessed raised countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - English - ISO
Learn More€48.00 -
€25.00
-
JIS C 3810:1999 (R2015)
Normal type and anti-pollution type suspension insulators
3/20/1999 - PDF - Japanese - JSA
Learn More€58.50 -
€50.18
-
DIN EN 1665:1998-11
Hexagon bolts with flange, heavy series, German version EN 1665:1997
11/1/1998 - PDF - German - DIN
Learn More€52.90 -
DIN EN 1665:1998-11
Hexagon bolts with flange - heavy series, English version of DIN EN 1665
11/1/1998 - PDF - English - DIN
Learn More€66.07 -
UNE-EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
9/11/1998 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
9/11/1998 - PDF - English - AENOR
Learn More€68.40 -
NBN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
2/15/1998 - PDF - French - NBN
Learn More€37.00 -
NBN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
2/15/1998 - PDF - German - NBN
Learn More€37.00 -
NBN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) +AC:2007
2/15/1998 - PDF - English - NBN
Learn More€37.00 -
DIN EN 1662:1998-02
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997
2/1/1998 - PDF - German - DIN
Learn More€45.98 -
DIN EN 1662:1998-02
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997
2/1/1998 - PDF - English - DIN
Learn More€57.57 -
€57.00
-
€68.40
-
NF EN 1665, E25-505 (09/1997)
Hexagon bolts with flange - Heavy series - Vis à tête hexagonale à embase cylindro-tronconique
9/1/1997 - Paper - French - AFNOR
Learn More€78.50 -
€37.00
-
€37.00
-
€37.00
-
BS 7670-2:1997
Steel nuts and bolts for resistance projection welding Specification of weld
3/15/1997 - PDF - English - BSI
Learn More€151.00 -
JIS B 1081:1997 (R2016)
Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results
1/20/1997 - PDF - Japanese - JSA
Learn More€32.50 -
€25.00
-
UNE-EN 20898-7:1996 (R2009)
MECHANICAL PROPERTIES OF FASTENERS. PART 7: TORSIONAL TEST AND MINIMUN TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (ISO 898-7:1992).
6/21/1996 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 20898-7:1996 (R2009)
MECHANICAL PROPERTIES OF FASTENERS. PART 7: TORSIONAL TEST AND MINIMUN TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (ISO 898-7:1992).
6/21/1996 - PDF - English - AENOR
Learn More€62.40 -
BS 7842:1996
Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
4/15/1996 - PDF - English - BSI
Learn More€151.00 -
BS 7814:1995
Specification for bolts and screws incorporating either underhead locking or anti-rotation features
12/15/1995 - PDF - English - BSI
Learn More€151.00 -
NBN EN 20898-7:1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
10/3/1995 - PDF - French - NBN
Learn More€37.00 -
NBN EN 20898-7:1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
10/3/1995 - PDF - German - NBN
Learn More€37.00 -
NBN EN 20898-7:1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
10/3/1995 - PDF - English - NBN
Learn More€37.00 -
DIN 11015:1995-10
Agricultural machinery - Flat countersunk square neck bolts with short square
10/1/1995 - PDF - German - DIN
Learn More€22.99 -
BS EN 20898-7:1995
Mechanical properties of fasteners Torsional test and minimum torques for bolts screws with nominal diameters 1 mm to 10
7/15/1995 - PDF - English - BSI
Learn More€151.00 -
BS 7795:1995 (R2017)
Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
6/15/1995 - PDF - English - BSI
Learn More€151.00 -
€57.00
-
€68.40
-
UNE-EN ISO 7721-2:1995 (R2009)
COUNTERSUNK FLAT HEAD SCREWS. PART 2: PENETRATION DEPTH OF CROSS RECESSES. (ISO 7721-2:1990).
6/14/1995 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 7721-2:1995 (R2009)
COUNTERSUNK FLAT HEAD SCREWS. PART 2: PENETRATION DEPTH OF CROSS RECESSES. (ISO 7721-2:1990).
6/14/1995 - PDF - English - AENOR
Learn More€55.20 -
NF EN 20898-7, E25-100-7 (05/1995) (R2001)
Mechanical properties of fasteners. Part 7 : torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm.
5/1/1995 - Paper - French - AFNOR
Learn More€60.50 -
DIN EN 20898-7:1995-04
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
4/1/1995 - PDF - German - DIN
Learn More€39.35 -
DIN EN 20898-7:1995-04
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
4/1/1995 - PDF - English - DIN
Learn More€49.16 -
JIS B 1058:1995 (R2014)
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
3/1/1995 - PDF - Japanese - JSA
Learn More€32.50 -
DIN 561:1995-02
Hexagon head set screws with small hexagon and full dog point
2/1/1995 - PDF - German - DIN
Learn More€39.35 -
DIN 561:1995-02
Hexagon head set screws with small hexagon and full dog point
2/1/1995 - PDF - English - DIN
Learn More€49.16 -
DIN 564:1995-02
Hexagon head set screws with small hexagon and half dog point and flat cone point
2/1/1995 - PDF - German - DIN
Learn More€39.35 -
DIN 564:1995-02
Hexagon set screws with small hexagon, half dog point and flat cone point
2/1/1995 - PDF - English - DIN
Learn More€49.16 -
DIN 939:1995-02
Studs - Metal end1,25 d
2/1/1995 - PDF - German - DIN
Learn More€39.35 -
DIN 939:1995-02
Studs - Metal end1,25 d
2/1/1995 - PDF - English - DIN
Learn More€49.16 -
€32.50
-
€32.50
-
€58.00
-
€58.00
-
€58.00
-
NBN EN ISO 7721-2:1995
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
2/1/1995 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 7721-2:1995
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
2/1/1995 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 7721-2:1995
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
2/1/1995 - PDF - English - NBN
Learn More€37.00 -
€180.00
-
BS EN ISO 7721-2:1995
Countersunk flat head screws Penetration depth of cross recesses
1/15/1995 - PDF - English - BSI
Learn More€151.00 -
DIN EN ISO 4757:1994-10
Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994
10/1/1994 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 4757:1994-10
Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994
10/1/1994 - PDF - English - DIN
Learn More€66.07 -
DIN EN ISO 7721-2:1994-10
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994
10/1/1994 - PDF - German - DIN
Learn More€39.35 -
DIN EN ISO 7721-2:1994-10
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994
10/1/1994 - PDF - English - DIN
Learn More€49.16 -
€86.50
-
€32.50
-
€32.50
-
JIS B 1014:1994 (R2014)
Countersunk flat head screws - Part 2: Penetration depth of cross recesses
2/1/1994 - PDF - Japanese - JSA
Learn More€32.50 -
BS 7715:1994
Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
1/15/1994 - PDF - English - BSI
Learn More€151.00 -
NF F05-008 (12/1993) (R2013)
Railway fixed equipment. Tee-head bolts. - Installations fixes ferroviaires
12/1/1993 - Paper - French - AFNOR
Learn More€48.00 -
NF F05-006 (12/1993) (R2013)
Railway fixed equipment. Triangle head bolts. - Installations fixes ferroviaires
12/1/1993 - Paper - French - AFNOR
Learn More€48.00 -
DIN 267-29:1993-08
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
8/1/1993 - PDF - German - DIN
Learn More€45.98 -
DIN 267-29:1993-08
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C
8/1/1993 - PDF - English - DIN
Learn More€57.57 -
JIS B 1041:1993 (R2013)
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements
7/1/1993 - PDF - Japanese - JSA
Learn More€32.50 -
JIS B 1043:1993 (R2013)
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
7/1/1993 - PDF - Japanese - JSA
Learn More€32.50 -
€46.00
-
€55.20
-
UNE-EN 27435:1993 (R2008)
SLOTTED SET SCREWS WITH LONG DOG POINT. (ISO 7435:1983).
4/23/1993 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN 27435:1993 (R2008)
SLOTTED SET SCREWS WITH LONG DOG POINT. (ISO 7435:1983).
4/23/1993 - PDF - English - AENOR
Learn More€55.20 -
€46.00
-
€55.20
-
UNE-EN 27721:1992
COUNTERSUNK HEAD SCREWS. HEAD CONFIGURATION AND GAUGING. (ISO 7721:1983).
12/10/1992 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN 27721:1992
COUNTERSUNK HEAD SCREWS. HEAD CONFIGURATION AND GAUGING. (ISO 7721:1983).
12/10/1992 - PDF - English - AENOR
Learn More€46.80 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
UNE-EN 26157-1:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (ISO 6157-1:1988)
12/2/1992 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 26157-1:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (ISO 6157-1:1988)
12/2/1992 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 26157-3:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 3: BOLTS, SCREWS AND STUDS FOR SPECIAL REQUIREMENTS. (ISO 6157-3:1988)
12/2/1992 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 26157-3:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 3: BOLTS, SCREWS AND STUDS FOR SPECIAL REQUIREMENTS. (ISO 6157-3:1988)
12/2/1992 - PDF - English - AENOR
Learn More€81.60 -
€60.50
-
€60.50
-
€60.50
-
UNE-EN 28839:1992
MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NONFERROUS METALS. (ISO 8839:1986)
11/23/1992 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 28839:1992
MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NONFERROUS METALS. (ISO 8839:1986)
11/23/1992 - PDF - English - AENOR
Learn More€62.40 -
ISO 898-7:1992 (R2020)
Mechanical properties of fasteners
Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
11/12/1992 - Paper - French - ISO
Learn More€48.00 -
ISO 898-7:1992 (R2020)
Mechanical properties of fasteners
Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
11/12/1992 - Paper - English - ISO
Learn More€48.00 -
UNE-EN 20273:1992
FASTENERS. CLEARANCE HOLES FOR BOLTS AND SCREWS. (ISO 273:1979).
11/10/1992 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE-EN 20273:1992
FASTENERS. CLEARANCE HOLES FOR BOLTS AND SCREWS. (ISO 273:1979).
11/10/1992 - PDF - English - AENOR
Learn More€30.00 -
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€151.00
-
DIN EN 22340:1992-10
Clevis pins without head (ISO 2340:1986); german version EN 22340:1992
10/1/1992 - PDF - German - DIN
Learn More€45.98 -
DIN EN 22340:1992-10
Clevis pins without head (ISO 2340:1986); german version EN 22340:1992
10/1/1992 - PDF - English - DIN
Learn More€57.57 -
DIN EN 22341:1992-10
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
10/1/1992 - PDF - German - DIN
Learn More€45.98 -
DIN EN 22341:1992-10
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
10/1/1992 - PDF - English - DIN
Learn More€57.57 -
DIN EN 27434:1992-10
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27434:1992-10
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 27435:1992-10
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27435:1992-10
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 27436:1992-10
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27436:1992-10
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
NF EN 20273, E25-023 (06/1992) (R2002)
Fasteners. Clearance hole for bolts and screws. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€60.50 -
NF EN 26157-1, E25-100-3 (06/1992) (R2002)
Fasteners. Surface discontinuities. Part 1 : bolts, screws and studs for general requirements. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€86.50 -
NF EN 26157-3, E25-100-4 (06/1992) (R2002)
Fasteners. Surface discontinuties. Part 3 : bolts, screw and studs for special requirements. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€75.50 -
NF EN 27721, E25-018 (06/1992)
Fasteners. Countersunk head screws. Head configuration and gauging. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€75.50 -
NF EN 28839, E25-011 (06/1992) (R2002)
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals. - Caractéristiques mécaniques des éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€60.50 -
€151.00
-
BS EN 26157-1:1992
Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
5/1/1992 - PDF - English - BSI
Learn More€180.00 -
BS EN 26157-3:1992
Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements
4/1/1992 - PDF - English - BSI
Learn More€180.00 -
BS EN 28839:1992
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
4/1/1992 - PDF - English - BSI
Learn More€151.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - French - NBN
Learn More€58.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - German - NBN
Learn More€58.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - English - NBN
Learn More€58.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - French - NBN
Learn More€37.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - German - NBN
Learn More€37.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - English - NBN
Learn More€37.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - French - NBN
Learn More€58.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - German - NBN
Learn More€58.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - English - NBN
Learn More€58.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - French - NBN
Learn More€89.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - German - NBN
Learn More€89.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - English - NBN
Learn More€89.00 -
DIN EN 20273:1992-02
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
2/1/1992 - PDF - German - DIN
Learn More€32.34 -
DIN EN 20273:1992-02
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
2/1/1992 - PDF - English - DIN
Learn More€40.56 -
DIN EN 27721:1992-02
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
2/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27721:1992-02
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
2/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 26157-1:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
12/1/1991 - PDF - German - DIN
Learn More€59.63 -
DIN EN 26157-1:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
12/1/1991 - PDF - English - DIN
Learn More€74.58 -
DIN EN 26157-3:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
12/1/1991 - PDF - German - DIN
Learn More€72.80 -
DIN EN 26157-3:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
12/1/1991 - PDF - English - DIN
Learn More€91.12 -
DIN EN 28839:1991-12
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
12/1/1991 - PDF - German - DIN
Learn More€45.98 -
DIN EN 28839:1991-12
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
12/1/1991 - PDF - English - DIN
Learn More€57.57 -
BS 1981:1991
Specification for unified machine screws and machine screw nuts
8/30/1991 - PDF - English - BSI
Learn More€331.00 -
BS 7364:1990
Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
9/30/1990 - PDF - English - BSI
Learn More€151.00 -
ISO 7721-2:1990 (R2019)
Countersunk flat head screws
Part 2: Penetration depth of cross recesses
8/23/1990 - Paper - French - ISO
Learn More€48.00 -
ISO 7721-2:1990 (R2019)
Countersunk flat head screws
Part 2: Penetration depth of cross recesses
8/23/1990 - Paper - English - ISO
Learn More€48.00 -
€25.00
-
€32.34
-
€72.00
-
€72.00
-
€110.00
-
€110.00
-
ISO 8678:1988 (R2020)
Cup head square neck bolts with small head and short neck
Product grade B
6/16/1988 - Paper - French - ISO
Learn More€48.00 -
ISO 8678:1988 (R2020)
Cup head square neck bolts with small head and short neck
Product grade B
6/16/1988 - Paper - English - ISO
Learn More€48.00 -
€32.50
-
€48.00
-
NF F03-003 (07/1986) (R2011)
Rolling stock - Notched head wood screws - Symbols F, FB and R
7/1/1986 - Paper - French - AFNOR
Learn More€34.67 -
€39.35
-
UIC 583:1986-01
Wagons - Application of a special mark on interchangeable parts
1/1/1986 - PDF - English - UIC
Learn More€41.00 -
€32.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€17.00
-
DIN 24536:1985-05
Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings
5/1/1985 - PDF - German - DIN
Learn More€39.35 -
JIS B 1001:1985 (R2014)
Diameter of clearance holes and counterbores for bolts and screws
3/1/1985 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
NF E25-659 (12/1984)
Tapping screws. Cross recessed mushroom head ("poelier"). Symbol RL Z.
12/1/1984 - Paper - French - AFNOR
Learn More€34.50 -
€48.00
-
BS 6487:1984
Specification for split pin holes and wire holes in bolts, screws and studs
3/30/1984 - PDF - English - BSI
Learn More€151.00 -
NF F03-004 (11/1983) (R2013)
Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-005 (11/1983) (R2013)
Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-006 (11/1983) (R2013)
Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-016 (11/1983) (R2013)
Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
€48.00
-
€48.00
-
€48.00
-
ISO 7435:1983 (R1988)
Slotted set screws with long dog point
General information
9/1/1983 - Paper - French - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
€48.00
-
ISO 7435:1983 (R1988)
Slotted set screws with long dog point
General information
9/1/1983 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
€72.00
-
€72.00