21.060.10 : Bolts, screws, studs
-
DIN EN ISO 4029:2004-05
Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003
5/1/2004 - PDF - English -
Learn More€57.57 -
DIN EN ISO 4026:2004-05
Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003
5/1/2004 - PDF - German -
Learn More€45.98 -
DIN EN ISO 2342:2004-05
Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003
5/1/2004 - PDF - English -
Learn More€57.57 -
DIN EN ISO 4027:2004-05
Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003
5/1/2004 - PDF - German -
Learn More€45.98 -
€60.50
-
DIN EN ISO 23429:2004-05
Gauging of hexagon sockets (ISO 23429:2004); German version EN ISO 23429:2004
5/1/2004 - PDF - English -
Learn More€57.57 -
€58.00
-
€58.00
-
€58.00
-
€151.00
-
€180.00
-
€72.00
-
€72.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€151.00
-
€48.00
-
€48.00
-
ASTM F2281-04(2017) + Redline
Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
1/1/2004 - PDF - English -
Learn More€61.00 -
ASTM F2281-04(2017)
Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
1/1/2004 - PDF - English -
Learn More€51.00 -
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€48.00
-
ISO 4028:2003 (R2023)
Hexagon socket set screws with dog point
General information
12/9/2003 - Paper - English -
Learn More€48.00 -
€48.00
-
ISO 4029:2003 (R2023)
Hexagon socket set screws with cup point
General information
12/9/2003 - Paper - English -
Learn More€48.00 -
ISO 4026:2003 (R2023)
Hexagon socket set screws with flat point
General information
12/5/2003 - Paper - French -
Learn More€48.00 -
ISO 4027:2003 (R2023)
Hexagon socket set screws with cone point
General information
12/5/2003 - Paper - English -
Learn More€48.00 -
€48.00
-
ISO 4026:2003 (R2023)
Hexagon socket set screws with flat point
General information
12/5/2003 - Paper - English -
Learn More€48.00 -
ISO 4027:2003 (R2023)
Hexagon socket set screws with cone point
General information
12/5/2003 - Paper - French -
Learn More€48.00 -
€48.00
-
DIN EN 14219:2003-09
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003
9/1/2003 - PDF - English -
Learn More€66.07 -
DIN EN 14219:2003-09
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003
9/1/2003 - PDF - German -
Learn More€52.90 -
NBN EN 14219:2003
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) +AC:2007
6/23/2003 - PDF - English -
Learn More€58.00 -
NBN EN 14219:2003
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
6/23/2003 - PDF - French -
Learn More€58.00 -
NBN EN 14219:2003
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
6/23/2003 - PDF - German -
Learn More€58.00 -
DIN 25195:2003-06
Railway vehicles - Countersunk bolts with double nip with metric ISO thread - Class C
6/1/2003 - PDF - German -
Learn More€32.34 -
DIN 25193:2003-06
Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C
6/1/2003 - PDF - German -
Learn More€32.34 -
€57.57
-
€45.98
-
UNE-EN 1515-2:2002
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated.
7/29/2002 - PDF - Spanish -
Learn More€69.00 -
UNE-EN 1515-2:2002
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated.
7/29/2002 - PDF - English -
Learn More€82.80 -
BS EN 1515-2:2001
Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated
7/23/2002 - PDF - English -
Learn More€180.00 -
DIN EN 1515-2:2002-03
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated; German version EN 1515-2:2001
3/1/2002 - PDF - English -
Learn More€99.44 -
DIN EN 1515-2:2002-03
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated; German version EN 1515-2:2001
3/1/2002 - PDF - German -
Learn More€79.72 -
NBN EN 1515-2:2002
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
2/12/2002 - PDF - French -
Learn More€121.00 -
NBN EN 1515-2:2002
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
2/12/2002 - PDF - German -
Learn More€121.00 -
NBN EN 1515-2:2002
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
2/12/2002 - PDF - English -
Learn More€121.00 -
€32.34
-
€40.56
-
UNE-EN ISO 4759-1:2001
Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C. (ISO 4759-1:2000).
9/23/2001 - PDF - Spanish -
Learn More€105.00 -
UNE-EN ISO 4759-1:2001
Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C. (ISO 4759-1:2000).
9/23/2001 - PDF - English -
Learn More€126.00 -
DIN ISO 885:2001-08
General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000)
8/1/2001 - PDF - English -
Learn More€40.56 -
DIN ISO 885:2001-08
General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000)
8/1/2001 - PDF - German -
Learn More€32.34 -
DIN EN ISO 4759-1:2001-04
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts, Product grades A, B and C (ISO 4759-1:2000), German version EN ISO 4759-1:2000
4/1/2001 - PDF - German -
Learn More€126.26 -
DIN EN ISO 4759-1:2001-04
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts, Product grades A, B and C (ISO 4759-1:2000), English version of DIN EN ISO 4759-1
4/1/2001 - PDF - English -
Learn More€157.66 -
BS EN ISO 4759-1:2001
Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B C
2/15/2001 - PDF - English -
Learn More€348.00 -
€58.00
-
NBN EN ISO 4016:2001
Vis à tête hexagonale partiellement filetées - Grade C (ISO 4016:1999)
1/22/2001 - PDF - French -
Learn More€58.00 -
NBN EN ISO 4759-1:2001
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)
1/22/2001 - PDF - German -
Learn More€184.00 -
NBN EN ISO 8676:2001
Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999)
1/22/2001 - PDF - English -
Learn More€58.00 -
NBN EN ISO 4018:2001
Vis à tête hexagonale entièrement filetées - Grade C (ISO 4018:1999)
1/22/2001 - PDF - French -
Learn More€58.00 -
NBN EN ISO 8765:2001
Vis à tête hexagonale, à filetage métrique à pas fin partiellement filetées - Grades A et B (ISO 8765:1999)
1/22/2001 - PDF - French -
Learn More€58.00 -
€58.00
-
NBN EN ISO 4014:2001
Vis à tête hexagonale partiellement filetées - Grades A et B (ISO 4014:1999)
1/22/2001 - PDF - French -
Learn More€58.00 -
NBN EN ISO 4759-1:2001
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)
1/22/2001 - PDF - English -
Learn More€184.00 -
€58.00
-
NBN EN ISO 4017:2001
Vis à tête hexagonale entièrement filetées - Grade A et B (ISO 4017:1999)
1/22/2001 - PDF - French -
Learn More€58.00 -
NBN EN ISO 4759-1:2001
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)
1/22/2001 - PDF - French -
Learn More€184.00 -
NBN EN ISO 8765:2001
Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:1999)
1/22/2001 - PDF - English -
Learn More€58.00 -
NBN EN ISO 8676:2001
Vis à tête hexagonale à filetage métrique à pas fin entièrement filetées - Grades A et B (ISO 8676:1999)
1/22/2001 - PDF - French -
Learn More€58.00 -
€58.00
-
NF EN ISO 4759-1, E25-022-1 (01/2001)
Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C - Tolérances des éléments de fixation
1/1/2001 - Paper - French -
Learn More€154.50 -
ASTM F2155-01(2017) + Redline
Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
1/1/2001 - PDF - English -
Learn More€68.00 -
€37.00
-
ASTM F2155-01(2017)
Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
1/1/2001 - PDF - English -
Learn More€57.00 -
ISO 4759-1:2000 (R2022)
Tolerances for fasteners
Part 1: Bolts, screws, studs and nuts
11/9/2000 - Paper - French -
Learn More€223.00 -
ISO 4759-1:2000 (R2022)
Tolerances for fasteners
Part 1: Bolts, screws, studs and nuts
11/9/2000 - Paper - English -
Learn More€223.00 -
UNE-EN ISO 10669:2000
PLAIN WASHERS FOR TAPPING SCREW AND WASHER ASSEMBLIES - NORMAL AND LARGE SERIES. PRODUCT GRADE A (ISO 10669:1999)
5/29/2000 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 15482:2000 (R2009)
CROSS RECESSED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15482:1999)
5/29/2000 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 15481:2000 (R2009)
CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW HEAD (ISO 15481:1999)
5/29/2000 - PDF - English -
Learn More€55.20 -
UNE-EN ISO 15330:2000
FASTENERS. PRELOADING TEST FOR THE DETECTION OF HYDROGEN EMBRITTLEMENT. PARALLEL BEARING SURFACE METHOD (ISO 15330:1999)
5/29/2000 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 10669:2000
PLAIN WASHERS FOR TAPPING SCREW AND WASHER ASSEMBLIES - NORMAL AND LARGE SERIES. PRODUCT GRADE A (ISO 10669:1999)
5/29/2000 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 15483:2000 (R2009)
CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15483:1999)
5/29/2000 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 15482:2000 (R2009)
CROSS RECESSED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15482:1999)
5/29/2000 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 15330:2000
FASTENERS. PRELOADING TEST FOR THE DETECTION OF HYDROGEN EMBRITTLEMENT. PARALLEL BEARING SURFACE METHOD (ISO 15330:1999)
5/29/2000 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 15481:2000 (R2009)
CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW HEAD (ISO 15481:1999)
5/29/2000 - PDF - Spanish -
Learn More€46.00 -
UNE-EN ISO 15483:2000 (R2009)
CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15483:1999)
5/29/2000 - PDF - English -
Learn More€55.20 -
BS ISO 885:2000
General purpose bolts and screws. Metric series. Radii under the head
5/15/2000 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 10666:2000 (R2009)
DRILLING SCREWS WITH TAPPING SCREW THREAD - MECHANICAL AND FUNCTIONAL PROPERTIES (ISO 10666:1999)
4/24/2000 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 10666:2000 (R2009)
DRILLING SCREWS WITH TAPPING SCREW THREAD - MECHANICAL AND FUNCTIONAL PROPERTIES (ISO 10666:1999)
4/24/2000 - PDF - English -
Learn More€68.40 -
UNE-EN 1515-1:2000
FLANGES AND THEIR JOINTS - BOLTING - PART 1: SELECTION OF BOLTING
4/17/2000 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 1515-1:2000
FLANGES AND THEIR JOINTS - BOLTING - PART 1: SELECTION OF BOLTING
4/17/2000 - PDF - English -
Learn More€72.00 -
€48.00
-
€48.00
-
DIN EN ISO 15482:2000-02
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999), English version DIN EN ISO 15482
2/1/2000 - PDF - English -
Learn More€57.57 -
DIN EN ISO 15483:2000-02
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999), English version DIN EN ISO 15483
2/1/2000 - PDF - English -
Learn More€57.57 -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999), German version EN ISO 10666:1999
2/1/2000 - PDF - German -
Learn More€52.90 -
DIN EN ISO 15481:2000-02
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999), German version EN ISO 15481:1999
2/1/2000 - PDF - German -
Learn More€45.98 -
DIN EN ISO 15482:2000-02
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999), German version EN ISO 15482:1999
2/1/2000 - PDF - German -
Learn More€45.98 -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999), English version DIN EN ISO 10666
2/1/2000 - PDF - English -
Learn More€66.07 -
DIN EN ISO 15483:2000-02
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999), German version EN ISO 15483:1999
2/1/2000 - PDF - German -
Learn More€45.98 -
DIN EN ISO 15481:2000-02
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999), English version DIN EN ISO 15481
2/1/2000 - PDF - English -
Learn More€57.57 -
NBN EN 1515-1:2000
Flanges and their joints - Bolting - Part 1: Selection of bolting
1/17/2000 - PDF - English -
Learn More€37.00 -
NBN EN 1515-1:2000
Flanges and their joints - Bolting - Part 1: Selection of bolting
1/17/2000 - PDF - French -
Learn More€37.00 -
NBN EN 1515-1:2000
Flanges and their joints - Bolting - Part 1: Selection of bolting
1/17/2000 - PDF - Dutch -
Learn More€37.00 -
NBN EN 1515-1:2000
Flanges and their joints - Bolting - Part 1: Selection of bolting
1/17/2000 - PDF - German -
Learn More€37.00 -
DIN EN 1515-1:2000-01
Flanges and their joints - Bolting - Part 1: Selection of bolting, German version EN 1515-1:1999
1/1/2000 - PDF - German -
Learn More€52.90 -
DIN EN 1515-1:2000-01
Flanges and their joints - Bolting - Part 1: Selection of bolting
1/1/2000 - PDF - English -
Learn More€66.07 -
€60.50
-
BS EN ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread
11/15/1999 - PDF - English -
Learn More€180.00 -
NBN EN ISO 15330:1999
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
11/15/1999 - PDF - French -
Learn More€58.00 -
BS EN ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread
11/15/1999 - PDF - English -
Learn More€180.00 -
BS EN ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread
11/15/1999 - PDF - English -
Learn More€180.00 -
NBN EN ISO 15330:1999
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
11/15/1999 - PDF - English -
Learn More€58.00 -
BS EN ISO 7085:1999
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
11/15/1999 - PDF - English -
Learn More€180.00 -
BS EN ISO 10666:1999
Drilling screws with tapping screw threads. Mechanical and functional properties
11/15/1999 - PDF - English -
Learn More€180.00 -
€39.35
-
€39.35
-
NBN EN ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
10/1/1999 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
10/1/1999 - PDF - German -
Learn More€37.00 -
NBN EN ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
10/1/1999 - PDF - French -
Learn More€37.00 -
NBN EN ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
10/1/1999 - PDF - German -
Learn More€37.00 -
NBN EN ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
10/1/1999 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
10/1/1999 - PDF - German -
Learn More€37.00 -
NBN EN ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
10/1/1999 - PDF - French -
Learn More€37.00 -
NBN EN ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
10/1/1999 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
10/1/1999 - PDF - French -
Learn More€37.00 -
ISO 10666:1999 (R2019)
Drilling screws with tapping screw thread
Mechanical and functional properties
9/23/1999 - Paper - French -
Learn More€72.00 -
ISO 10666:1999 (R2019)
Drilling screws with tapping screw thread
Mechanical and functional properties
9/23/1999 - Paper - English -
Learn More€72.00 -
ISO 15483:1999 (R2019)
Cross recessed raised countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - English -
Learn More€48.00 -
ISO 15483:1999 (R2019)
Cross recessed raised countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - French -
Learn More€48.00 -
ISO 15481:1999 (R2019)
Cross recessed pan head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - English -
Learn More€48.00 -
ISO 15481:1999 (R2019)
Cross recessed pan head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - French -
Learn More€48.00 -
ISO 15482:1999 (R2019)
Cross recessed countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - English -
Learn More€48.00 -
ISO 15482:1999 (R2019)
Cross recessed countersunk head drilling screws with tapping screw thread
General information
9/2/1999 - Paper - French -
Learn More€48.00 -
DIN EN 1665:1998-11
Hexagon bolts with flange - heavy series, English version of DIN EN 1665
11/1/1998 - PDF - English -
Learn More€66.07 -
DIN EN 1665:1998-11
Hexagon bolts with flange, heavy series, German version EN 1665:1997
11/1/1998 - PDF - German -
Learn More€52.90 -
UNE-EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
9/11/1998 - PDF - English -
Learn More€68.40 -
UNE-EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
9/11/1998 - PDF - Spanish -
Learn More€57.00 -
NBN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
2/15/1998 - PDF - German -
Learn More€37.00 -
NBN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) +AC:2007
2/15/1998 - PDF - English -
Learn More€37.00 -
NBN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
2/15/1998 - PDF - French -
Learn More€37.00 -
DIN EN 1662:1998-02
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997
2/1/1998 - PDF - German -
Learn More€45.98 -
DIN EN 1662:1998-02
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997
2/1/1998 - PDF - English -
Learn More€57.57 -
€68.40
-
€57.00
-
NF EN 1665, E25-505 (09/1997)
Hexagon bolts with flange - Heavy series - Vis à tête hexagonale à embase cylindro-tronconique
9/1/1997 - Paper - French -
Learn More€78.50 -
€37.00
-
€37.00
-
€37.00
-
BS 7670-2:1997
Steel nuts and bolts for resistance projection welding Specification of weld
3/15/1997 - PDF - English -
Learn More€151.00 -
€25.00
-
UNE-EN 20898-7:1996 (R2009)
MECHANICAL PROPERTIES OF FASTENERS. PART 7: TORSIONAL TEST AND MINIMUN TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (ISO 898-7:1992).
6/21/1996 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 20898-7:1996 (R2009)
MECHANICAL PROPERTIES OF FASTENERS. PART 7: TORSIONAL TEST AND MINIMUN TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (ISO 898-7:1992).
6/21/1996 - PDF - English -
Learn More€62.40 -
BS 7842:1996
Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
4/15/1996 - PDF - English -
Learn More€151.00 -
BS 7814:1995
Specification for bolts and screws incorporating either underhead locking or anti-rotation features
12/15/1995 - PDF - English -
Learn More€151.00 -
NBN EN 20898-7:1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
10/3/1995 - PDF - French -
Learn More€37.00 -
NBN EN 20898-7:1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
10/3/1995 - PDF - German -
Learn More€37.00 -
NBN EN 20898-7:1995
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
10/3/1995 - PDF - English -
Learn More€37.00 -
DIN 11015:1995-10
Agricultural machinery - Flat countersunk square neck bolts with short square
10/1/1995 - PDF - German -
Learn More€22.99 -
BS EN 20898-7:1995
Mechanical properties of fasteners Torsional test and minimum torques for bolts screws with nominal diameters 1 mm to 10
7/15/1995 - PDF - English -
Learn More€151.00 -
BS 7795:1995 (R2017)
Specification for bolts, screws and studs with a pre-applied micro-encapsulated chemical adhesive feature incorporated into the thread
6/15/1995 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 7721-2:1995 (R2009)
COUNTERSUNK FLAT HEAD SCREWS. PART 2: PENETRATION DEPTH OF CROSS RECESSES. (ISO 7721-2:1990).
6/14/1995 - PDF - English -
Learn More€55.20 -
€68.40
-
UNE-EN ISO 7721-2:1995 (R2009)
COUNTERSUNK FLAT HEAD SCREWS. PART 2: PENETRATION DEPTH OF CROSS RECESSES. (ISO 7721-2:1990).
6/14/1995 - PDF - Spanish -
Learn More€46.00 -
€57.00
-
NF EN 20898-7, E25-100-7 (05/1995) (R2001)
Mechanical properties of fasteners. Part 7 : torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm.
5/1/1995 - Paper - French -
Learn More€60.50 -
DIN EN 20898-7:1995-04
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
4/1/1995 - PDF - English -
Learn More€49.16 -
DIN EN 20898-7:1995-04
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
4/1/1995 - PDF - German -
Learn More€39.35 -
NBN EN ISO 7721-2:1995
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
2/1/1995 - PDF - English -
Learn More€37.00 -
DIN 564:1995-02
Hexagon head set screws with small hexagon and half dog point and flat cone point
2/1/1995 - PDF - German -
Learn More€39.35 -
NBN EN ISO 7721-2:1995
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
2/1/1995 - PDF - French -
Learn More€37.00 -
€39.35
-
DIN 939:1995-02
Studs - Metal end1,25 d
2/1/1995 - PDF - English -
Learn More€49.16 -
€58.00
-
DIN 564:1995-02
Hexagon set screws with small hexagon, half dog point and flat cone point
2/1/1995 - PDF - English -
Learn More€49.16 -
NBN EN ISO 7721-2:1995
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
2/1/1995 - PDF - German -
Learn More€37.00 -
€49.16
-
€58.00
-
DIN 939:1995-02
Studs - Metal end1,25 d
2/1/1995 - PDF - German -
Learn More€39.35 -
€58.00
-
BS EN ISO 7721-2:1995
Countersunk flat head screws Penetration depth of cross recesses
1/15/1995 - PDF - English -
Learn More€151.00 -
€180.00