21.060.10 : Bolts, screws, studs
-
€48.00
-
€72.00
-
€48.00
-
€180.00
-
BS EN ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws
2/28/2011 - PDF - English -
Learn More€151.00 -
€151.00
-
€151.00
-
ISO 14585:2011 (R2021)
Hexalobular socket pan head tapping screws
General information
2/8/2011 - Paper - French -
Learn More€48.00 -
ISO 14586:2011 (R2021)
Hexalobular socket countersunk head tapping screws
General information
2/8/2011 - Paper - English -
Learn More€48.00 -
ISO 14586:2011 (R2021)
Hexalobular socket countersunk head tapping screws
General information
2/8/2011 - Paper - French -
Learn More€48.00 -
ISO 14587:2011 (R2021)
Hexalobular socket raised countersunk (oval) head tapping screws
General information
2/8/2011 - Paper - English -
Learn More€48.00 -
ISO 14587:2011 (R2021)
Hexalobular socket raised countersunk (oval) head tapping screws
General information
2/8/2011 - Paper - French -
Learn More€48.00 -
ISO 14585:2011 (R2021)
Hexalobular socket pan head tapping screws
General information
2/8/2011 - Paper - English -
Learn More€48.00 -
€49.16
-
DIN EN ISO 225:2011-02
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010), Multilingual version EN ISO 225:2010
2/1/2011 - PDF - English, French, German, Russian -
Learn More€141.96 -
€66.07
-
€52.90
-
€39.35
-
DIN EN ISO 12474:2011-01
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
1/1/2011 - PDF - English -
Learn More€82.52 -
€63.00
-
€39.35
-
€39.35
-
DIN EN ISO 12474:2011-01
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010), German version EN ISO 12474:2010
1/1/2011 - PDF - German -
Learn More€65.89 -
€49.16
-
€52.00
-
€49.16
-
BS 4933:2010
Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
12/31/2010 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 3506-4:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
12/15/2010 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 3506-3:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
12/15/2010 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 3506-4:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
12/15/2010 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 3506-3:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
12/15/2010 - PDF - English -
Learn More€81.60 -
€59.63
-
€74.58
-
NF EN ISO 225, E25-002 (12/2010)
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions - Éléments de fixation
12/1/2010 - Paper - French -
Learn More€118.00 -
NBN EN ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
11/26/2010 - PDF - English -
Learn More€58.00 -
NBN EN ISO 225:2010
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
11/26/2010 - PDF - English, French, German, Dutch -
Learn More€184.00 -
NBN EN ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
11/26/2010 - PDF - French -
Learn More€58.00 -
NBN EN ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
11/26/2010 - PDF - German -
Learn More€58.00 -
ISO 12474:2010 (R2020)
Hexagon socket head cap screws with metric fine pitch thread
General information
9/21/2010 - Paper - English -
Learn More€72.00 -
ISO 12474:2010 (R2020)
Hexagon socket head cap screws with metric fine pitch thread
General information
9/21/2010 - Paper - French -
Learn More€72.00 -
€45.98
-
€49.16
-
€39.35
-
€49.16
-
€39.35
-
€57.57
-
€45.98
-
€49.16
-
€39.35
-
€49.16
-
€39.35
-
€57.57
-
NF E27-191 (08/2010)
Tools for pressing and moulding - Fasteners - Shouldered retaining screws - Outillage de presse et de moulage
8/1/2010 - Paper - French -
Learn More€48.00 -
DIN 835:2010-07
Studs - Metal end2 d
7/1/2010 - PDF - English -
Learn More€57.57 -
DIN 940:2010-07
Studs - Metal end2,5 d
7/1/2010 - PDF - German -
Learn More€45.98 -
DIN 835:2010-07
Studs - Metal end2 d
7/1/2010 - PDF - German -
Learn More€45.98 -
DIN 940:2010-07
Studs - Metal end2,5 d
7/1/2010 - PDF - English -
Learn More€57.57 -
BS 7371-7:2010
Coatings on metal fasteners Specification for mechanically applied zinc and based coatings
4/30/2010 - PDF - English -
Learn More€180.00 -
DIN EN ISO 3506-4:2010-04
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009), German version EN ISO 3506-4:2009
4/1/2010 - PDF - German -
Learn More€85.79 -
DIN EN ISO 3506-3:2010-04
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009), German version EN ISO 3506-3:2009
4/1/2010 - PDF - German -
Learn More€79.72 -
DIN EN ISO 3506-4:2010-04
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
4/1/2010 - PDF - English -
Learn More€107.48 -
DIN EN ISO 3506-3:2010-04
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
4/1/2010 - PDF - English -
Learn More€99.44 -
NBN EN ISO 3506-4:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
1/22/2010 - PDF - German -
Learn More€89.00 -
NBN EN ISO 3506-3:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
1/22/2010 - PDF - English -
Learn More€89.00 -
NBN EN ISO 3506-3:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
1/22/2010 - PDF - French -
Learn More€89.00 -
NBN EN ISO 3506-4:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
1/22/2010 - PDF - English -
Learn More€89.00 -
NBN EN ISO 3506-4:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
1/22/2010 - PDF - French -
Learn More€89.00 -
NBN EN ISO 3506-3:2010
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
1/22/2010 - PDF - German -
Learn More€89.00 -
NF EN ISO 3506-3, E25-100-8 (01/2010)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3 : set screws and similar fasteners not under tensile stress
1/1/2010 - Paper - French -
Learn More€75.67 -
€37.00
-
NF EN ISO 3506-4, E25-651 (01/2010)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws
1/1/2010 - Paper - French -
Learn More€75.67 -
BS EN ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws
12/31/2009 - PDF - English -
Learn More€250.00 -
BS EN ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar not under tensile stress
12/31/2009 - PDF - English -
Learn More€250.00 -
€32.34
-
€40.56
-
€40.56
-
€32.34
-
ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners
Part 4: Tapping screws
10/29/2009 - Paper - French -
Learn More€110.00 -
ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners
Part 3: Set screws and similar fasteners not under tensile stress
10/29/2009 - Paper - English -
Learn More€110.00 -
ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners
Part 3: Set screws and similar fasteners not under tensile stress
10/29/2009 - Paper - French -
Learn More€110.00 -
ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners
Part 4: Tapping screws
10/29/2009 - Paper - English -
Learn More€110.00 -
DIN EN ISO 10644:2009-10
Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009), German version EN ISO 10644:2009
10/1/2009 - PDF - German -
Learn More€52.90 -
DIN EN ISO 10644:2009-10
Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
10/1/2009 - PDF - English -
Learn More€66.07 -
DIN 267-28:2009-09
Fasteners - Part 28: Steel screws, bolts and studs with locking coating - Technical delivery conditions
9/1/2009 - PDF - English -
Learn More€66.07 -
DIN 267-28:2009-09
Fasteners - Part 28: Steel screws, bolts and studs with locking coating, Technical specifications
9/1/2009 - PDF - German -
Learn More€52.90 -
BS EN ISO 10644:2009
Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
7/31/2009 - PDF - English -
Learn More€151.00 -
DIN 931-2:2009-06
Hexagon head bolts - Part 2: Metric thread M 68 to M 160 x 6 - Product grade B
6/1/2009 - PDF - English -
Learn More€57.57 -
DIN 931-2:2009-06
Hexagon head bolts - Part 2: Metric thread M 68 to M 160 x 6 - Product grade B
6/1/2009 - PDF - German -
Learn More€45.98 -
€52.00
-
UNE-EN 14831:2008 (R2015)
Fasteners - Tightening performance - Torque/Angle simplified test method
9/24/2008 - PDF - English -
Learn More€82.80 -
UNE-EN 14831:2008 (R2015)
Fasteners - Tightening performance - Torque/Angle simplified test method
9/24/2008 - PDF - Spanish -
Learn More€69.00 -
€0.00
-
€151.00
-
NF E25-130 (07/2008) (R2013)
Bolt and washer assemblies - Conical static captive washer - Product grade A - Vis à métaux à rondelle imperdable
7/1/2008 - Paper - French -
Learn More€48.00 -
€0.00
-
€39.35
-
€32.34
-
€49.16
-
€40.56
-
UNE-EN ISO 15065:2008
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
1/16/2008 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 15065:2008
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
1/16/2008 - PDF - Spanish -
Learn More€52.00 -
€52.00
-
ASTM A394-08(2024) + Redline
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
1/1/2008 - PDF - English -
Learn More€72.00 -
€52.00
-
€42.00
-
ASTM A394-08(2024)
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
1/1/2008 - PDF - English -
Learn More€60.00 -
€0.00
-
UNE-EN 14219:2004/AC:2007 (R2008)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
10/17/2007 - PDF - Spanish -
Learn More€0.00 -
€0.00
-
UNE-EN 1662:1998/AC:2007
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
10/17/2007 - PDF - Spanish -
Learn More€0.00 -
UNE-EN 14219:2004/AC:2007 (R2008)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
10/17/2007 - PDF - English -
Learn More€0.00 -
€0.00
-
UNE-EN 1662:1998/AC:2007
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
10/17/2007 - PDF - English -
Learn More€0.00 -
€39.50
-
DIN EN 1665 Berichtigung 1:2007-07
Hexagon bolts with flange, heavy series, German version EN 1665:1997, Corrigenda to DIN EN 1665:1998-11, German version EN 1665:1997/AC:2007
7/1/2007 - PDF - German -
Learn More€0.00 -
DIN EN 1665 Berichtigung 1:2007-07
Hexagon bolts with flange, heavy series Corrigendum 1 to English version of DIN EN 1665:1998-11
7/1/2007 - PDF - English -
Learn More€0.00 -
DIN EN 1662 Berichtigung 1:2007-06
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified), German version EN 1662:1997, Corrigenda to DIN EN 1662:1998-02, German version EN 1662:1997/AC:2007
6/1/2007 - PDF - German -
Learn More€0.00 -
DIN EN 14219 Berichtigung 1:2007-06
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified) Corrigendum 1 to English version of DIN EN 14219:2003-09
6/1/2007 - PDF - English -
Learn More€0.00 -
DIN EN 1662 Berichtigung 1:2007-06
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) Corrigendum 1 to English version of DIN EN 1662:1998-02
6/1/2007 - PDF - English -
Learn More€0.00 -
DIN 25201-7 Berichtigung 1:2007-06
Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation, Corrigenda to DIN 25201-7:2004-06
6/1/2007 - PDF - German -
Learn More€0.00 -
DIN EN 14219 Berichtigung 1:2007-06
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified), German version EN 14219:2003, Corrigenda to DIN EN 14219:2003-09, German version EN 14219:2003/AC:2007
6/1/2007 - PDF - German -
Learn More€0.00 -
€151.00
-
DIN 267-13:2007-05
Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C
5/1/2007 - PDF - English -
Learn More€66.07 -
DIN EN 22341 Berichtigung 1:2007-05
Clevis pins with head (ISO 2341:1986), German version EN 22341:1992, Corrigenda to DIN EN 22341:1992-10
5/1/2007 - PDF - German -
Learn More€0.00 -
DIN 267-13:2007-05
Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C
5/1/2007 - PDF - German -
Learn More€52.90 -
BS EN 14219:2003
Hexagon bolts with flange with metric fine pitch thread. Small series
4/30/2007 - PDF - English -
Learn More€151.00 -
€151.00
-
DIN EN ISO 4027 Berichtigung 1:2007-04
Hexagon socket set screws with cone point (ISO 4027:2003), German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
4/1/2007 - PDF - German -
Learn More€0.00 -
DIN 4000-160:2007-02
Tabular layout of product properties - Part 160: Fasteners with external thread
2/1/2007 - PDF - German -
Learn More€92.62 -
€39.35
-
€151.00
-
BS EN 1515-3:2005
Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated
8/31/2006 - PDF - English -
Learn More€151.00 -
€32.34
-
UNE-EN 1515-3:2006 (R2009)
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
4/5/2006 - PDF - English -
Learn More€62.40 -
UNE-EN 1515-3:2006 (R2009)
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
4/5/2006 - PDF - Spanish -
Learn More€52.00 -
NF E25-017 (03/2006) (R2011)
Fasteners - Counterbores for bolts and screws - Dimensions - Éléments de fixation
3/1/2006 - Paper - French -
Learn More€34.67 -
€39.35
-
€39.35
-
€40.00
-
ASTM F468M-06(2018)
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
1/1/2006 - PDF - English -
Learn More€57.00 -
ASTM F468M-06(2018) + Redline
Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
1/1/2006 - PDF - English -
Learn More€68.00 -
BS EN 14831:2005
Fasteners. Tightening performance. Torque/Angle simplified test method
12/12/2005 - PDF - English -
Learn More€250.00 -
DIN EN 1515-3:2005-12
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005
12/1/2005 - PDF - German -
Learn More€45.98 -
DIN EN 1515-3:2005-12
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005
12/1/2005 - PDF - English -
Learn More€57.57 -
€32.34
-
€32.34
-
€32.34
-
NBN EN 1515-3:2006
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
10/28/2005 - PDF - German -
Learn More€58.00 -
NBN EN 1515-3:2006
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
10/28/2005 - PDF - English -
Learn More€58.00 -
NBN EN 1515-3:2006
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
10/28/2005 - PDF - French -
Learn More€58.00 -
DIN ISO 8992:2005-09
Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
9/1/2005 - PDF - German -
Learn More€45.98 -
DIN ISO 8992:2005-09
Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
9/1/2005 - PDF - English -
Learn More€57.57 -
DIN EN 14831:2005-07
Fasteners - Tightening performance - Torque/Angle simplified test method; German version EN 14831:2005
7/1/2005 - PDF - German -
Learn More€79.72 -
DIN EN 14831:2005-07
Fasteners - Tightening performance - Torque/Angle simplified test method; German version EN 14831:2005
7/1/2005 - PDF - English -
Learn More€99.44 -
NBN EN 14831:2005
Fasteners - Tightening performance - Torque/Angle simplified test method
6/10/2005 - PDF - English -
Learn More€121.00 -
NBN EN 14831:2005
Fasteners - Tightening performance - Torque/Angle simplified test method
6/10/2005 - PDF - French -
Learn More€121.00 -
NBN EN 14831:2005
Fasteners - Tightening performance - Torque/Angle simplified test method
6/10/2005 - PDF - German -
Learn More€121.00 -
DIN 25201-5:2005-06
Design guide for railway vehicles and their components - Bolted joints - Part 5: Protection against corrosion
6/1/2005 - PDF - German -
Learn More€39.35 -
DIN EN ISO 15065:2005-05
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
5/1/2005 - PDF - German -
Learn More€45.98 -
VDA 235-103:2005-05
Cr(VI)-freie Oberflächenschutzarten für Schrauben in Blech, Kunststoff und Holz
5/1/2005 - PDF - German -
Learn More€75.00 -
NF EN ISO 15065, E25-012 (05/2005)
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
5/1/2005 - Paper - French -
Learn More€48.00 -
DIN EN ISO 15065:2005-05
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
5/1/2005 - PDF - English -
Learn More€57.57 -
BS ISO 8992:2005
Fasteners. General requirements for bolts, screws, studs and nuts
4/27/2005 - PDF - English -
Learn More€151.00 -
NBN EN ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
4/1/2005 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
4/1/2005 - PDF - French -
Learn More€37.00 -
NBN EN ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
4/1/2005 - PDF - German -
Learn More€37.00 -
BS EN ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
3/24/2005 - PDF - English -
Learn More€151.00 -
ISO 15065:2005 (R2023)
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
General information
2/10/2005 - Paper - French -
Learn More€48.00 -
ISO 15065:2005 (R2023)
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
General information
2/10/2005 - Paper - English -
Learn More€48.00 -
€45.98
-
€52.00
-
€62.40
-
€62.40
-
€52.00
-
€62.40
-
€62.40
-
€60.00
-
€52.00
-
€52.00
-
€72.00
-
€52.00
-
€62.40
-
€46.00
-
€55.20
-
UNE-EN 14219:2004 (R2013)
Hexagon bolts with flange with metric fine pitch thread. Small series (ISO 15072:1999 modified)
10/29/2004 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 14219:2004 (R2013)
Hexagon bolts with flange with metric fine pitch thread. Small series (ISO 15072:1999 modified)
10/29/2004 - PDF - English -
Learn More€72.00 -
DIN 6900-5:2004-09
Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer
9/1/2004 - PDF - English -
Learn More€40.56 -
DIN 6900-5:2004-09
Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer
9/1/2004 - PDF - German -
Learn More€32.34 -
€75.67
-
€82.52
-
DIN 25201-7:2004-06
Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation
6/1/2004 - PDF - German -
Learn More€52.90 -
DIN EN ISO 4762:2004-06
Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004
6/1/2004 - PDF - German -
Learn More€65.89 -
DIN 25201-3:2004-06
Design guide for railway vehicles and their components - Bolted joints - Part 3: Design - Electrical application
6/1/2004 - PDF - German -
Learn More€45.98 -
DIN EN ISO 2342:2004-05
Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003
5/1/2004 - PDF - English -
Learn More€57.57 -
DIN EN ISO 4027:2004-05
Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003
5/1/2004 - PDF - German -
Learn More€45.98 -
€60.50
-
DIN EN ISO 23429:2004-05
Gauging of hexagon sockets (ISO 23429:2004); German version EN ISO 23429:2004
5/1/2004 - PDF - English -
Learn More€57.57 -
DIN EN ISO 4028:2004-05
Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003
5/1/2004 - PDF - German -
Learn More€45.98 -
DIN EN ISO 4026:2004-05
Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003
5/1/2004 - PDF - English -
Learn More€57.57 -
DIN EN ISO 4029:2004-05
Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003
5/1/2004 - PDF - German -
Learn More€45.98