21.060.10 : Bolts, screws, studs

Items 1 to 200 of 1480 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  • ASTM F837M-20

    Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
    5/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F837M-20 + Redline

    Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
    5/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM F901-20

    Standard Specification for Aluminum Transmission Tower Bolts and Nuts
    5/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F901-20 + Redline

    Standard Specification for Aluminum Transmission Tower Bolts and Nuts
    5/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN ISO 3506-1:2020 + Redline

    Tracked Changes. Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs with specified grades property classes
    4/24/2020 - PDF - English - BSI
    Learn More
    €369.72

  • BS EN ISO 3506-1:2020

    Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs with specified grades property classes
    4/20/2020 - PDF - English - BSI
    Learn More
    €284.40

  • NF E25-035-1 (04/2020)

    Assemblages vissés - Partie 1 : Fixations en acier inoxydable - Méthodes d'essai couple/tension et aptitude au serrage
    4/1/2020 - Paper - French - AFNOR
    Learn More
    €100.63

  • ASTM F2660-20

    Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
    4/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F2660-20 + Redline

    Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
    4/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • NF E25-035-2 (04/2020)


    4/1/2020 - Paper - French - AFNOR
    Learn More
    €73.30

  • ASTM F788-20

    Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
    4/1/2020 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F788-20 + Redline

    Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
    4/1/2020 - PDF - English - ASTM
    Learn More
    €56.00

  • UNE-EN ISO 7053:2020

    Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
    2/26/2020 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • UNE-EN ISO 7053:2020

    Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
    2/26/2020 - PDF - English - AENOR
    Learn More
    €57.00

  • BS EN 14399-4:2015 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut
    2/25/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN 14399-3:2015 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut
    2/25/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 7053:2019 + Redline

    Tracked Changes. Fasteners. Hexagon washer head tapping screws
    2/24/2020 - PDF - English - BSI
    Learn More
    €169.46

  • BS EN ISO 15480:2019 + Redline

    Tracked Changes. Fasteners. Hexagon washer head drilling screws with tapping screw thread
    2/24/2020 - PDF - English - BSI
    Learn More
    €169.46

  • PR NF EN 1515-4, E29-042-4PR (01/2020)


    1/1/2020 - Paper - English, French - AFNOR
    Learn More
    €82.95

  • ASTM F3125/F3125M-19

    Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
    12/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F3125/F3125M-19 + Redline

    Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
    12/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F432-19

    Standard Specification for Roof and Rock Bolts and Accessories
    12/1/2019 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM F432-19 + Redline

    Standard Specification for Roof and Rock Bolts and Accessories
    12/1/2019 - PDF - English - ASTM
    Learn More
    €80.00

  • NBN EN ISO 10642:2019

    Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
    11/28/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 10642:2019

    Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
    11/28/2019 - PDF - French - NBN
    Learn More
    €45.00

  • NBN EN ISO 10642:2019

    Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
    11/28/2019 - PDF - German - NBN
    Learn More
    €45.00

  • 19/30385565 DC:2019

    BS EN 1515-4. Flanges and their joints. Bolting Part 4. Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
    11/25/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN ISO 10642:2019

    Fasteners. Hexagon socket countersunk head screws with reduced loadability
    10/29/2019 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN ISO 10642, E25-146 (10/2019)

    Fasteners - Hexagon socket countersunk head screws with reduced loadability - Fixations - Vis à tête fraisée à six pans creux à capacité de charge réduite
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • NBN EN ISO 7053:2019

    Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
    8/28/2019 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN ISO 7053:2019

    Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
    8/28/2019 - PDF - French - NBN
    Learn More
    €30.00

  • NBN EN ISO 15480:2019

    Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
    8/28/2019 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN ISO 15480:2019

    Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
    8/28/2019 - PDF - French - NBN
    Learn More
    €30.00

  • NBN EN ISO 7053:2019

    Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
    8/28/2019 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN ISO 15480:2019

    Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
    8/28/2019 - PDF - German - NBN
    Learn More
    €30.00

  • SAE J 174:2019-08-07

    Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series (Stabilized: Aug 2019)
    8/7/2019 - PDF - English - SAE
    Learn More
    €77.00

  • BS EN ISO 7053:2019

    Fasteners. Hexagon washer head tapping screws
    7/19/2019 - PDF - English - BSI
    Learn More
    €130.35

  • BS EN ISO 15480:2019

    Fasteners. Hexagon washer head drilling screws with tapping screw thread
    7/19/2019 - PDF - English - BSI
    Learn More
    €130.35

  • NF EN ISO 7053, E25-665 (07/2019)

    Hexagon washer head tapping screws - Vis à tôle à tête hexagonale à embase plate
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF EN ISO 15480, E25-856 (07/2019)

    Hexagon washer head drilling screws with tapping screw thread - Vis autoperceuses à tête hexagonale à ambase plate, avec filetage de vis à tôle
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €40.69

  • SAE J 2295M:2019-05-10

    Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric) (Stabilized: May 2019)
    5/10/2019 - PDF - English - SAE
    Learn More
    €77.00

  • PR NF EN ISO 2702, E25-650-1PR (05/2019)

    Fixations - Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques et physiques
    5/1/2019 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • NF E25-805 (05/2019)

    Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Système HR - Boulons à tête hexagonale (vis + écrou + rondelles) de diamètres M39 à M72
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • UNE-EN ISO 10683:2019

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    4/30/2019 - PDF - Spanish - AENOR
    Learn More
    €66.00

  • UNE-EN ISO 10683:2019

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    4/30/2019 - PDF - English - AENOR
    Learn More
    €79.00

  • UNE-EN ISO 888:2019

    Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
    4/24/2019 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN ISO 888:2019

    Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
    4/24/2019 - PDF - English - AENOR
    Learn More
    €61.00

  • UNE-EN ISO 898-3:2019

    Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
    4/24/2019 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 898-3:2019

    Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
    4/24/2019 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN 14399-10:2019

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    4/17/2019 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 14399-10:2019

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    4/17/2019 - PDF - English - AENOR
    Learn More
    €72.00

  • 19/30351951 DC:2019

    BS EN ISO 2702. Fasteners. Heat-treated self-tapping screws. Mechanical and physical properties
    4/12/2019 - PDF - English - BSI
    Learn More
    €23.70

  • UNE-EN 14399-8:2019

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    4/10/2019 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN 14399-8:2019

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    4/10/2019 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN 14399-7:2019

    High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    4/10/2019 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 14399-7:2019

    High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    4/10/2019 - PDF - English - AENOR
    Learn More
    €72.00

  • PR NF EN ISO 13918/A1, A87-021/A1PR (02/2019)

    Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons - Amendement 1
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €42.16

  • PR NF EN 17334, T76-167PR (01/2019)

    Goujons collés dans les produits en bois de structure collé - Essais, exigences et classification de la résistance au cisaillement du joint
    1/1/2019 - Paper - English, French - AFNOR
    Learn More
    €116.74

  • JASO F121:2019

    Automotive parts-Pan head screws with collar
    1/1/2019 - PDF - Japanese - JSAE
    Learn More
    €39.00

  • 18/30374657 DC:2018

    BS ENISO 13918:2017 AMD 1. Welding. Studs and ceramic ferrules for arc stud welding
    12/11/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN 967:2018-12

    Cross recessed pan head screws with collar - Product grade A
    12/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 34805-1:2018-12

    Button head screws - Part 1: Driving feature hexalobular socket
    12/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 34805-2:2018-12

    Button head screws - Part 2: Screws with collar and driving feature hexalobular socket
    12/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 267-31:2018-12

    Fasteners - Technical specifications - Part 31: Metric thread rolling screws of property class 10.9 with additionally hardened thread forming zone
    12/1/2018 - PDF - German - DIN
    Learn More
    €54.80

  • DIN EN ISO 13918/A1:2018-12

    Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2018); German and English version EN ISO 13918:2018/prA1:2018
    12/1/2018 - PDF - English, German - DIN
    Learn More
    €40.80

  • ASTM F835-18

    Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
    12/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F835-18 + Redline

    Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
    12/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • NF E25-116 (11/2018)

    Square head screws - Product grades A and B - Symbol Q - Vis à métaux à tête carrée - Grades A et B - Symbole Q
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF E25-129 (11/2018)

    Screws - Large round flat « poêlier » head with reduced loadability, slotted - Symbol RL S - Vis à métaux - Tête ronde large 'poêlier' à capacité de charge réduite, fendue - Symbole RL S
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF E25-139 (11/2018)

    Screws - Z cross recessed and slotted pan head - Symbol CBL ZS - Vis à métaux - Tête cylindrique bombée large à empreinte cruciforme Z, fendue - Symbole CBL ZS
    11/1/2018 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF E25-122 (10/2018)

    Screws - Z Cross recessed mushroom head ''poeliers'' with reduced loadability - Symbol RL Z - Vis à métaux - Tête ronde large ''poêlier'' à capacité de charge réduite, à empreinte cruciforme Z - Symbole RL Z
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €40.69

  • MS 9700:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A // Inactive for new design
    9/25/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9123:2018

    SCREW, MACHINE, SLOTTED HEX HEAD, 250-28 // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9287:2018

    BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .4375-20 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9298:2018

    BOLT, MACHINE-STEEL AMS 6322, BLACK OXIDE,DRILLED 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9439:2018

    SCREW, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .164-36 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9443:2018

    BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .375-24 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9445:2018

    BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .500-20 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9446:2018

    BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .5625-18 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9447:2018

    BOLT, MACHINE-STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM, PLATED, HEXAGON HEAD, DRILLED, .625-18 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9487:2018

    SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, 136-40 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9488:2018

    SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, .164-36 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9704:2018

    SCREW, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT STEEL, .164-36 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9706:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT STEEL, .250-28 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9707:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9709:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9717:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .375-24 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9718:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .4375-20 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9725:2018

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 17294:2018

    STUD-STEPPED, 1.5 DIA ENGAGEMENT, .3125-18 X 250-28 (MIL-S-8879 THREAD) // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 17295:2018

    STUD STEPPED, 1.5 DIA ENGAGEMENT, .375-16 X .3125-24 (MIL-S-8879 THREAD) // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 17296:2018

    STUD-STEPPED, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24 (MIL-S-8879 THREAD) // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 17299:2018

    STUD-STRAIGHT .190-24 X .190-32 (MIL-S-8879 THREAD) // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 17300:2018

    STUD-STRAIGHT, .250-20 X .250-28 (MIL-S-8879 THREAD) // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 17301:2018

    STUD-STRAIGHT, .3125-18X .3125-24 (MIL-S-8879 THREAD) // Inactive for new design
    9/24/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9088:2018

    BOLT, MACHINE, STEEL, DRILLED 12 POINT HEAD, .190 (NO. 10)-32 (CADMIUM PLATE) // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9122:2018

    SCREW, MACHINE, SLOTTED HEX HEAD, .190-32 // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9147:2018

    Bolt, Machine, 12 Point Head, Steel, .250-28 UNF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9152:2018

    BOLT MACHINE, STEEL, 12 POINT HEAD, .5625-18, CADMIUM PLATE // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9192:2018

    BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .164(NO.8)-36 CADMIUM PLATE // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9211:2018

    BOLT, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .375-24 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9213:2018

    BOLT, MACHINE-STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, .500-20 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9214:2018

    BOLT, MACHINE, DOUBLE HEXAGON EXTENDED WASHER HEAD, STEEL, .5625-18 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9215:2018

    SCREW, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .138 40 UNJF 3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9220:2018

    BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .375-24 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9221:2018

    BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .4375-20 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9222:2018

    BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .500-20 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9223:2018

    BOLT, MACHINE-STEEL DIFFUSED NICKEL-CADMIUM PLATE, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .5625-18 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9282:2018

    SCREW, MACHINE STEEL AMS 6322, BLACK OXIDE, HEXAGON HEAD, .164-36 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9293:2018

    SCREW, MACHINE STEEL AMS 6322, BLACK OXIDE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9688:2018

    BOLT, MACHINE-HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, DIFFUSED NICKEL CADIUM, .375-24 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9896:2018

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, AMS 5616, .3125-24 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9915:2018

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS 6322, CADMIUM PLATED, .250-28 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9932:2018

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .190-32 UNJF-3A // Inactive for new design
    9/20/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21316:2018

    THUMBSCREW (SHOULDERED), FLAT POINT, CARBON STEEL, CADMIUM PLATED, UNC-2A // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35218:2018

    SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, ALUMINUM ALLOY, UNC-2A // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35219:2018

    Screw, Machine-Pan Head, Cross-Recessed, Aluminum Alloy, UNF-2A // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35265:2018

    SCREW, MACHINE DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL, UNC-2A // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 27950:2018

    BOLT, EYE - TURNBUCKLE (GENERAL PURPOSE) // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21301:2018

    SCREW, SHOULDERED, HEX-SOCKET HEAD .375, .500, .625 UNC-3A, UNPLATED // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 25332:2018

    SCREW AND WASHER ASSEMBLY, RELAY SOCKET MOUNTING // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16198:2018

    SCREWS, WOOD, SLOTTED ROUND HEAD, AUSTENITIC CORROSION RESISTING STEEL, NON-MAGNETIC // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16199:2018

    SCREWS, WOOD, SLOTTED, FLAT COUNTERSUNK (82 DEG.) HEAD, COPPER-SILICON ALLOY, NONMAGNETIC // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16204:2018

    BOLT, FINNED NECK, COUNTERSUNK FLATHEAD, UNC-2A, NON-MAGNETIC // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16207:2018

    BOLTS, SQUARE NECK, (CARRIAGE BOLT), ROUND HEAD, UNC-2A, COPPER-SILICON ALLOY, NONMAGNETIC // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16215:2018

    SCREWS, WOOD, SLOTTED OVAL HEAD 82 DEG. AUSTENITIC, CORROSION RESISTING STEEL, NONMAGNETIC // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16216:2018

    SCREWS, WOOD, SLOTTED ROUND HEAD, COPPER-SILICON ALLOY, NONMAGNETIC // Inactive for new design
    9/18/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35492:2018

    SCREW, WOOD, FLAT HEAD, CROSS-RECESSED, STEEL AND BRASS // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35493:2018

    SCREW, WOOD, ROUND HEAD, CROSS-RECESSED, STEEL AND BRASS // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35494:2018

    SCREW, WOOD, FLAT HEAD, SLOTTED, STEEL AND BRASS // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35495:2018

    SCREW, WOOD, ROUND HEAD, SLOTTED, STEEL AND BRASS // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35646:2018

    SCREW, EYE, STEEL OR BRASS // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35754:2018

    BOLT, SQUARE NECK, COUNTERSUNK, (PLOW) STEEL, CADMIUM OR ZINC PLATED, NC-2A AND UNC-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35801:2018

    BOLT, LAG, FETTER DRIVE HOT GALVANIZED (POLE-LINE) // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35355:2018

    BOLT, MACHINE, SQUARE HEAD, STEEL, CADMIUM OR ZINC PLATED, UNC-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51033:2018

    Setscrew-Hexagon Socket, Flat Point, Brass, Black Oxide, UNF-3A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51040:2018

    SETSCREW-HEXAGON SOCKET, CONE POINT, BRASS, BLACK OXIDE, UNF-3A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51479:2018

    SCREW, MACHINE, 82 DEGREE FLAT COUNTERSUNK HEAD, CROSS-RECESSED, CARBON STEEL, UNF-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51869:2018

    SCREW, TAPPING HIGH PERFORMANCE, THREAD ROLLING, TYPES SF, SW AND TT, HEXAGON WASHER HEAD // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51937:2018

    BOLT, EYE, SHOULDER UNC-2A AND UNF-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51946:2018

    BOLT, RIBBED SHOULDER, SINGLE END, SPLINED, 3/4 INCH // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51947:2018

    BOLT, RIBBED SHOULDER. WHEEL MOUNTING SINGLE END, 3/4 INCH, EXTENDED LENGTH // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51948:2018

    BOLT, RIBBED SHOULDER, SINGLE END, SPINED, 7/16 AND 1/2 INCH // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51949:2018

    BOLT, SHOULDER, WHEEL MOUNTING, SINGLE END, KEYED HEAD // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51955:2018

    Setscrew-Square Head, Cup Point, Carbon Steel // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35266:2018

    SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, CARBON STEEL, UNF-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35277:2018

    Screw, Machine-Drilled Fillister Head, Slotted, Aluminum Alloy, CREW, UNC-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 35278:2018

    SCREW, MACHINE-DRILLED FILLISTER HEAD, SLOTTED, ALUMINUM ALLOY, UNF-2A // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21091:2018

    Bolt, Self-Locking, 250 Deg. F., Steel, 75 KSI FSU, 125 KSI FTU, 100 Deg. Flash Head Cross Recessed // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21092:2018

    Bolt, Self-Locking, 250 Deg. F, CRES, 48 KSI FSU, 80 KSI FTU, 100 Deg. Flush Head, Cross Recessed // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21099:2018

    Bolt, Self Locking, Corrosion Resisting Steel, 80 KSI FTU, 250 Deg. F, 12-Point, External Wrenching (Externally Wrenching Cap Screws) // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21270:2018

    SCREW, INSTRUMENT - 100 DEGREE FLAT HEAD // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21271:2018

    SCREW, INSTRUMENT - BINDING HEAD // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 21279:2018

    BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER, .190-32 (MIL-S-8879) (ASG) // Inactive for new design
    9/17/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9089:2018

    Bolt-Machine, Drilled 12 Point Head, Steel, .250-28 UNF-3A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9093:2018

    Bolt-Machine, Drilled 12 Point Head, Steel, .500-20 UNF-3A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9146:2018

    Bolt, Machine, 12 Point Head, Steel, .190-32 UNF-3A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9148:2018

    BOLT, MACHINE, 12 POINT HEAD, STEEL, .3125-24 UNF-3A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 9149:2018

    Bolt, Machine, 12 Point Head, Steel, .375-24UNF-3A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51481:2018

    Screw, Machine, 82 Degree Flat Countersunk Head, Cross-Recessed, Carbon Steel, UNC-2A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51485:2018

    Screw, Tapping, Thread Cutting, Types D, F, G or T Pan Head, Cross-Recessed, Carbon Steel // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 51493:2018

    Screw, Machine, Pan Head, Cross-Recessed, Carbon Steel UNF-2A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16217:2018

    Screws, Wood, Slotted Flat Head, 82 Degree, Austenitic, Corrosion-Resisitng Steel, Nonmagnetic // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • MS 16219:2018

    Screws, Machine, Flat Countersunk Head, Slotted, Nonmagnetic, Corrosion Resisting Steel, Passivated, UNC-2A // Inactive for new design
    9/14/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • DIN 34825:2018-09

    Cylindrical head screws with inner contact flange - Driving feature 12 point socket
    9/1/2018 - PDF - German - DIN
    Learn More
    €40.80

  • ASTM F1554-18

    Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
    9/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM F1554-18 + Redline

    Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
    9/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN ISO 13918:2018

    Welding. Studs and ceramic ferrules for arc stud welding
    8/9/2018 - PDF - English - BSI
    Learn More
    €253.59

  • MS 9224:2018

    BOLT- MACHINE, 12 POINT HEAD, HEAT RESISTANT, .5625-18 AMS 5735 (ASG) // Inactive for new design
    8/7/2018 - PDF sécurisé - English - DODNAV
    Learn More
    €22.00

  • DIN EN ISO 888:2018-08

    Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012); German version EN ISO 888:2018
    8/1/2018 - PDF - German - DIN
    Learn More
    €61.70

  • NBN EN ISO 888:2018

    Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
    7/25/2018 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 888:2018

    Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
    7/25/2018 - PDF - English - NBN
    Learn More
    €45.00

  • UNE-EN ISO 13918:2018

    Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
    7/18/2018 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • UNE-EN ISO 13918:2018

    Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
    7/18/2018 - PDF - English - AENOR
    Learn More
    €75.00

  • BS EN ISO 888:2018

    Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
    7/11/2018 - PDF - English - BSI
    Learn More
    €130.35

  • 18/30333917 DC:2018

    BS EN ISO 3506-1. Mechanical properties of corrosion-resistant stainless steel fasteners Part 1. Bolts, screws and studs
    7/6/2018 - PDF - English - BSI
    Learn More
    €23.70

  • VG 85537:2018-07

    Bolted connections with reduced shank - Studs, hexagon nuts, extension sleeves; Text in German and English
    7/1/2018 - PDF - English, German - DIN
    Learn More
    €89.80

  • VG 85539:2018-07

    Non-magnetizable and stainless bolts and nuts - Materials and marking; Text in German and English
    7/1/2018 - PDF - English, German - DIN
    Learn More
    €74.40

  • NF EN ISO 888, E25-024 (06/2018)

    Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths - Fixations - Vis, goujons et tiges filetées - Longueurs nominales et longueurs filetées
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €40.69

  • DIN EN ISO 10642:2018-05

    Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO/DIS 10642:2018); German and English version prEN ISO 10642:2018
    5/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN EN ISO 7053:2018-05

    Hexagon washer head tapping screws (ISO/DIS 7053:2018); German and English version prEN ISO 7053:2018
    5/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • DIN EN ISO 15480:2018-05

    Hexagon washer head drilling screws with tapping screw thread (ISO/DIS 15480:2018); German and English Version prEN ISO 15480:2018
    5/1/2018 - PDF - English, German - DIN
    Learn More
    €54.80

  • NF EN 14399-10, E25-801-10 (05/2018)

    High-strength structural bolting assemblies for preloading - Part 10 : system HRC - Bolt and nut assemblies with calibrated preload - Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 10 : Système HRC - Boulons (vis + écrou + rondelle) à précontrainte calibrée
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €73.30

  • VG 85525:2018-04

    Hasp screws; Text in German and English
    4/1/2018 - PDF - English, German - DIN
    Learn More
    €75.40

  • DIN 34810:2018-04

    Plastic hexagon head screws
    4/1/2018 - PDF - German - DIN
    Learn More
    €47.60

  • DIN 580:2018-04 + Redline version

    Lifting eye bolts
    4/1/2018 - PDF - German - DIN
    Learn More
    €82.00

  • ASTM C1002-18

    Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
    4/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM C1002-18 + Redline

    Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
    4/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM C954-18

    Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
    4/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM C954-18 + Redline

    Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
    4/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM C1513-18

    Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
    4/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM C1513-18 + Redline

    Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
    4/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • DIN 580:2018-04

    Lifting eye bolts
    4/1/2018 - PDF - German - DIN
    Learn More
    €68.30

  • DIN EN ISO 13918:2018-04

    Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017); German version EN ISO 13918:2018
    4/1/2018 - - - DIN
    Learn More
    From: €108.80

  • ASTM A489-18e1

    Standard Specification for Carbon Steel Eyebolts
    3/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • NBN EN ISO 13918:2018

    Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
    2/28/2018 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 13918:2018

    Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
    2/28/2018 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 13918:2018

    Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
    2/28/2018 - PDF - French - NBN
    Learn More
    €56.00

  • JIS B 1217:2018

    Bolting for use with pipe flanges
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €46.02

  • DIN EN ISO 3506-1:2018-02

    Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified property classes - Coarse pitch thread and fine pitch thread (ISO/DIS 3506-1:2017); German and English version prEN ISO 3506-1:2017
    2/1/2018 - PDF - English, German - DIN
    Learn More
    €119.60

Items 1 to 200 of 1480 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8