21.060.01 : Fasteners in general

Items 1 to 200 of 462 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  • ASTM F2282-23

    Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
    11/1/2023 - PDF - English - ASTM
    Learn More
    €66.00

  • ASTM F2282-23 + Redline

    Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
    11/1/2023 - PDF - English - ASTM
    Learn More
    €79.00

  • ASTM F1789-23

    Standard Terminology for F16 Mechanical Fasteners
    11/1/2023 - PDF - English - ASTM
    Learn More
    €66.00

  • ASTM F1789-23 + Redline

    Standard Terminology for F16 Mechanical Fasteners
    11/1/2023 - PDF - English - ASTM
    Learn More
    €79.00

  • BS EN 14592:2022 + Redline

    Tracked Changes. Timber structures. Dowel-type fasteners. Requirements
    9/29/2023 - PDF - English - BSI
    Learn More
    €492.00

  • VG 96943:2023-09

    Coding system for selected surface coatings according to DIN EN ISO 4042 and DIN EN ISO 10683 for fasteners in the military sector, Text in German and English
    9/1/2023 - PDF - English, German - DIN
    Learn More
    €52.90

  • BS EN 14592:2022

    Timber structures. Dowel-type fasteners. Requirements
    6/1/2023 - PDF - English - BSI
    Learn More
    €377.00

  • ASTM A962/A962M-23a

    Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
    5/15/2023 - PDF - English - ASTM
    Learn More
    €66.00

  • ASTM A962/A962M-23a + Redline

    Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
    5/15/2023 - PDF - English - ASTM
    Learn More
    €79.00

  • DIN CEN ISO/TR 20491:2023-05

    Fasteners - Fundamentals of hydrogen embrittlement in steel fasteners (ISO/TR 20491:2019), German version CEN ISO/TR 20491:2021
    5/1/2023 - PDF - German - DIN
    Learn More
    €79.63

  • UNE-EN ISO 4042:2023

    Fasteners - Electroplated coating systems (ISO 4042:2022)
    3/22/2023 - PDF - Spanish - AENOR
    Learn More
    €114.00

  • UNE-EN ISO 4042:2023

    Fasteners - Electroplated coating systems (ISO 4042:2022)
    3/22/2023 - PDF - English - AENOR
    Learn More
    €136.80

  • ASTM A193/A193M-23

    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
    3/1/2023 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM A193/A193M-23 + Redline

    Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
    3/1/2023 - PDF - English - ASTM
    Learn More
    €72.00

  • VG 95657:2023-03

    Fasteners - Fasteners and actuators - Survey, Text in German and English
    3/1/2023 - PDF - English, German - DIN
    Learn More
    €99.35

  • UNE-EN 14592:2023

    Timber structures - Dowel-type fasteners - Requirements
    1/18/2023 - PDF - Spanish - AENOR
    Learn More
    €126.00

  • UNE-EN 14592:2023

    Timber structures - Dowel-type fasteners - Requirements
    1/18/2023 - PDF - English - AENOR
    Learn More
    €151.20

  • UNE-EN ISO 3506-6:2023

    Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
    1/18/2023 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN ISO 3506-6:2023

    Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
    1/18/2023 - PDF - English - AENOR
    Learn More
    €88.80

  • NF EN 1992-4/NA, E27-817/NA (12/2022)

    Eurocode 2 - Design of concrete structures - Part 4 : design of fastenings for use in concrete - National annex to NF EN 1992-4:2018
    12/1/2022 - Paper - French - AFNOR
    Learn More
    €60.67

  • BS EN ISO 4042:2022

    Fasteners. Electroplated coating systems
    11/21/2022 - PDF - English - BSI
    Learn More
    €377.00

  • ASTM A320/A320M-22a

    Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
    11/1/2022 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM A320/A320M-22a + Redline

    Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
    11/1/2022 - PDF - English - ASTM
    Learn More
    €65.00

  • DIN EN ISO 4042:2022-11

    Fasteners - Electroplated coating systems (ISO 4042:2022), German version EN ISO 4042:2022
    11/1/2022 - PDF - German - DIN
    Learn More
    €158.04

  • DIN EN ISO 3506-6:2022-09

    Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020), German version EN ISO 3506-6:2022
    9/1/2022 - PDF - German - DIN
    Learn More
    €92.62

  • BS EN ISO 3506-6:2022

    Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners General rules for the selection steels and nickel alloys
    8/18/2022 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 14592:2022-08

    Timber structures - Dowel-type fasteners - Requirements, German version EN 14592:2022
    8/1/2022 - PDF - German - DIN
    Learn More
    €169.25

  • NBN EN ISO 3506-6:2022

    Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
    6/25/2022 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN ISO 3506-6:2022

    Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
    6/25/2022 - PDF - English - NBN
    Learn More
    €121.00

  • NBN EN ISO 3506-6:2022

    Mechanische Verbindungselemente - Mechanische Eigenschaften von Verbindungselementen aus korrosionsbeständigen nichtrostenden Stählen - Teil 6: Allgemeine Regeln für die Auswahl von nichtrostenden Stählen und Nickellegierungen für Verbindungselemente (ISO 3506-6:2020)
    6/25/2022 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN ISO 4042:2022

    Fasteners - Electroplated coating systems (ISO 4042:2022)
    6/18/2022 - PDF - French - NBN
    Learn More
    €184.00

  • NBN EN ISO 4042:2022

    Fasteners - Electroplated coating systems (ISO 4042:2022)
    6/18/2022 - PDF - English - NBN
    Learn More
    €184.00

  • NBN EN ISO 4042:2022

    Verbindungselemente - Galvanisch aufgebrachte Überzugsysteme (ISO 4042: 2022)
    6/18/2022 - PDF - German - NBN
    Learn More
    €184.00

  • NF EN ISO 3506-6, E25-026 (06/2022)

    Fixations - Caractéristiques mécaniques des fixations en acier inoxydable résistant à la corrosion - Partie 6 : règles générales pour la sélection des aciers inoxydables et des alliages de nickel pour les fixations
    6/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN ISO 4042, E25-009 (06/2022)

    Fasteners - Electroplated coating systems
    6/1/2022 - Paper - French - AFNOR
    Learn More
    €130.67

  • NBN EN 14592:2022

    Timber structures - Dowel-type fasteners - Requirements
    4/30/2022 - PDF - German - NBN
    Learn More
    €184.00

  • NBN EN 14592:2022

    Timber structures - Dowel-type fasteners - Requirements
    4/30/2022 - PDF - English - NBN
    Learn More
    €184.00

  • NBN EN 14592:2022

    Structures en bois - Éléments de fixation de type tige - Exigences
    4/30/2022 - PDF - French - NBN
    Learn More
    €184.00

  • NF E25-005 (04/2022)

    Fixations - Contrôles dimensionnels et méthodes d'essai
    4/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • SAE J 1701M:2022-03-29

    Torque-Tension Tightening for Metric Series Fasteners
    3/29/2022 - PDF - English - SAE
    Learn More
    €75.00

  • SAE/USCAR-1-3:2022-03-15

    SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES (Stabilized: Mar 2022)
    3/15/2022 - PDF - English - SAE
    Learn More
    €70.00

  • NF E25-046-1 (03/2022)

    Fasteners - Loosening/untightening resistance test - Part 1 : Methodology by " Staircase" approach
    3/1/2022 - Paper - French - AFNOR
    Learn More
    €60.67

  • UNE-EN ISO 1891-2:2015/A1:2022

    Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
    2/23/2022 - PDF - Spanish - AENOR
    Learn More
    €34.00

  • UNE-EN ISO 1891-2:2015/A1:2022

    Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
    2/23/2022 - PDF - English - AENOR
    Learn More
    €40.80

  • FD CEN ISO/TR 20491, E25-043 (02/2022)

    Fixations - Principes de la fragilisation par l'hydrogène pour les fixations en acier
    2/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • XP E25-046-2 (02/2022)

    Fasteners - Loosening/untightening resistance test - Part 2 : Test method by alternate bending, called "helicopter" test
    2/1/2022 - Paper - French - AFNOR
    Learn More
    €60.67

  • CEN ISO/TR 20491:2021

    Fasteners - Fundamentals of hydrogen embrittlement in steel fasteners (ISO/TR 20491:2019)
    12/11/2021 - PDF - French - NBN
    Learn More
    €121.00

  • CEN ISO/TR 20491:2021

    Verbindungselemente - Grundlagen der Wasserstoffversprödung bei Verbindungselementen aus Stahl (ISO/TR 20491:2019)
    12/11/2021 - PDF - German - NBN
    Learn More
    €121.00

  • CEN ISO/TR 20491:2021

    Fasteners - Fundamentals of hydrogen embrittlement in steel fasteners (ISO/TR 20491:2019)
    12/11/2021 - PDF - English - NBN
    Learn More
    €121.00

  • ASTM F3359/F3359M-21

    Standard Test Method for Determining Bending Yield Moment of Staples
    12/1/2021 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM F3359/F3359M-21 + Redline

    Standard Test Method for Determining Bending Yield Moment of Staples
    12/1/2021 - PDF - English - ASTM
    Learn More
    €53.00

  • ASTM F1667/F1667M-21a

    Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    12/1/2021 - PDF - English - ASTM
    Learn More
    €81.00

  • ASTM F1667/F1667M-21a + Redline

    Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
    12/1/2021 - PDF - English - ASTM
    Learn More
    €95.00

  • SAE J 2280:2021-12-01

    Ship Systems and Equipment - Fasteners - Selection and Identification Guidance
    12/1/2021 - PDF - English - SAE
    Learn More
    €139.00

  • VDA 235-101:2021-11

    VDA-Prüfblatt - Reibungszahleinstellung von mechanischen Verbindungselementen mit metrischem Gewinde
    11/1/2021 - PDF - German - VDA
    Learn More
    €144.00

  • VDA 235-204:2021-11

    High-strength fasteners for the automotive industry
    11/1/2021 - PDF - English, German - VDA
    Learn More
    €144.00

  • NF E25-000 (08/2021)

    Fasteners - General vocabulary and structure of fasteners standards - Fixations - Vocabulaire général et structure des normes
    8/1/2021 - Paper - French - AFNOR
    Learn More
    €60.67

  • BS EN ISO 1891-2:2014+A1:2021

    Fasteners. Terminology Vocabulary and definitions for coatings
    7/7/2021 - PDF - English - BSI
    Learn More
    €348.00

  • NBN EN ISO 1891-2:2014/A1:2021

    Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
    6/28/2021 - PDF - French - NBN
    Learn More
    €37.00

  • NBN EN ISO 1891-2:2014/A1:2021

    Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
    6/28/2021 - PDF - German - NBN
    Learn More
    €37.00

  • NBN EN ISO 1891-2:2014/A1:2021

    Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)
    6/28/2021 - PDF - English - NBN
    Learn More
    €37.00

  • NF EN ISO 1891-2/A1, E25-013-2/A1 (06/2021)

    Fasteners - Terminology - Part 2 : vocabulary and definitions for coatings AMENDMENT 1
    6/1/2021 - Paper - French - AFNOR
    Learn More
    €25.50

  • ASTM F606/F606M-21

    Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
    6/1/2021 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM F606/F606M-21 + Redline

    Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
    6/1/2021 - PDF - English - ASTM
    Learn More
    €68.00

  • ASTM D5652-21

    Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
    3/15/2021 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM D5652-21 + Redline

    Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
    3/15/2021 - PDF - English - ASTM
    Learn More
    €61.00

  • SAE/USCAR-10-3:2020-11-19

    TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS (Stabilized: Nov 2020)
    11/19/2020 - PDF - English - SAE
    Learn More
    €79.00

  • SAE/USCAR-11-2:2020-11-19

    TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES (Stabilized: Nov 2020)
    11/19/2020 - PDF - English - SAE
    Learn More
    €66.00

  • SAE/USCAR-32-1:2020-11-19

    NEW FINISH DEVELOPMENT DOCUMENT (Stabilized: Nov 2020)
    11/19/2020 - PDF - English - SAE
    Learn More
    €93.00

  • UNE-EN ISO 15480:2020

    Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
    11/4/2020 - PDF - Spanish - AENOR
    Learn More
    €53.00

  • UNE-EN ISO 15480:2020

    Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
    11/4/2020 - PDF - English - AENOR
    Learn More
    €63.60

  • BS EN ISO 16047:2005+A1:2012

    Fasteners. Torque/clamp force testing
    10/23/2020 - PDF - English - BSI
    Learn More
    €180.00

  • ASTM E1685-20

    Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
    10/1/2020 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM E1685-20 + Redline

    Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
    10/1/2020 - PDF - English - ASTM
    Learn More
    €61.00

  • VDA 235-205:2020-08

    High strength and ultra-high strength fasteners with bainitic heat treatment for the automotive industry - Property classes 12.8U to 16.8U
    8/1/2020 - PDF - English, German - VDA
    Learn More
    €168.00

  • UNE-EN ISO 3269:2020

    Fasteners - Acceptance inspection (ISO 3269:2019)
    5/6/2020 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • UNE-EN ISO 3269:2020

    Fasteners - Acceptance inspection (ISO 3269:2019)
    5/6/2020 - PDF - English - AENOR
    Learn More
    €75.60

  • DIN EN ISO 1891-2/A1:2020-04

    Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/DAM 1:2020), German and English version EN ISO 1891-2:2014/prA1:2020
    4/1/2020 - PDF - English, German - DIN
    Learn More
    €32.34

  • DIN 34804:2020-03

    Fasteners - Change of appearance of black surfaces coating systems
    3/1/2020 - PDF - German - DIN
    Learn More
    €59.63

  • BS EN ISO 10683:2018 + Redline

    Tracked Changes. Fasteners. Non-electrolytically applied zinc flake coating systems
    2/26/2020 - PDF - English - BSI
    Learn More
    €382.00

  • BS EN 15048-1:2016 + Redline

    Tracked Changes. Non-preloaded structural bolting assemblies General requirements
    2/25/2020 - PDF - English - BSI
    Learn More
    €382.00

  • BS EN 14399-2:2015 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading Suitability
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 14399-10:2018 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HRC. Bolt and nut with calibrated preload
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 15048-2:2016 + Redline

    Tracked Changes. Non-preloaded structural bolting assemblies Fitness for purpose
    2/25/2020 - PDF - English - BSI
    Learn More
    €235.00

  • BS EN 14399-7:2018 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 14399-9:2018 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HR or HV. Direct tension indicators bolt and nut
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 14399-1:2015 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading General requirements
    2/25/2020 - PDF - English - BSI
    Learn More
    €382.00

  • BS EN 14399-4:2015 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 14399-3:2015 + Redline

    Tracked Changes. High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • DIN EN ISO 3269:2020-01

    Fasteners - Acceptance inspection (ISO 3269:2019), German version EN ISO 3269:2019
    1/1/2020 - PDF - German - DIN
    Learn More
    €72.80

  • DIN 74:2020-01

    Countersinks for countersunk head screws, except countersunk head screws with heads according to DIN EN 27721
    1/1/2020 - PDF - German - DIN
    Learn More
    €45.98

  • NBN EN ISO 3269:2019

    Fasteners - Acceptance inspection (ISO 3269:2019)
    10/23/2019 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 3269:2019

    Fasteners - Acceptance inspection (ISO 3269:2019)
    10/23/2019 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN ISO 3269:2019

    Fasteners - Acceptance inspection (ISO 3269:2019)
    10/23/2019 - PDF - English - NBN
    Learn More
    €58.00

  • BS EN ISO 3269:2019

    Fasteners. Acceptance inspection
    10/15/2019 - PDF - English - BSI
    Learn More
    €180.00

  • SAE J 1648:2019-10-07

    Protective Coatings for Fasteners (Stabilized: Oct 2019)
    10/7/2019 - PDF - English - SAE
    Learn More
    €93.00

  • NF EN ISO 3269, E25-006 (09/2019)

    Fasteners - Acceptance inspection
    9/1/2019 - Paper - French - AFNOR
    Learn More
    €60.50

  • ISO 3269:2019

    Fasteners
    Acceptance inspection
    7/25/2019 - Paper - English - ISO
    Learn More
    €72.00

  • ASTM F1137/F1137M-19

    Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
    6/15/2019 - PDF - English - ASTM
    Learn More
    €46.00

  • ASTM F1137/F1137M-19 + Redline

    Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
    6/15/2019 - PDF - English - ASTM
    Learn More
    €53.00

  • DIN EN 14399-7:2019-06

    High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies, German version EN 14399-7:2018
    6/1/2019 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 14399-8:2019-06

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies, German version EN 14399-8:2018
    6/1/2019 - PDF - German - DIN
    Learn More
    €79.72

  • DIN EN 14399-10:2019-06

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload, German version EN 14399-10:2018
    6/1/2019 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 14399-9:2019-06

    High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies, German version EN 14399-9:2018
    6/1/2019 - PDF - German - DIN
    Learn More
    €92.62

  • UNE-EN ISO 10683:2019

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    4/30/2019 - PDF - Spanish - AENOR
    Learn More
    €85.00

  • UNE-EN ISO 10683:2019

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    4/30/2019 - PDF - English - AENOR
    Learn More
    €102.00

  • UNE-EN ISO 1891-4:2019

    Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
    4/24/2019 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 1891-4:2019

    Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
    4/24/2019 - PDF - English - AENOR
    Learn More
    €82.80

  • UNE-EN 14399-9:2019

    High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
    4/17/2019 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 14399-9:2019

    High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
    4/17/2019 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN 14399-10:2019

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    4/17/2019 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 14399-10:2019

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    4/17/2019 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN 14399-7:2019

    High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    4/10/2019 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN 14399-7:2019

    High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    4/10/2019 - PDF - English - AENOR
    Learn More
    €88.80

  • UNE-EN 14399-8:2019

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    4/10/2019 - PDF - Spanish - AENOR
    Learn More
    €70.00

  • UNE-EN 14399-8:2019

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    4/10/2019 - PDF - English - AENOR
    Learn More
    €84.00

  • FD CEN/TR 17081, E27-821 (04/2019)

    Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €60.67

  • DIN CEN/TR 17079*DIN SPEC 18144:2019-04

    Design of fastenings for use in concrete - Redundant non-structural systems, German version CEN/TR 17079:2018
    4/1/2019 - PDF - German - DIN
    Learn More
    €42.43

  • DIN CEN/TR 17080*DIN SPEC 18145:2019-04

    Design of fastenings for use in concrete - Anchor channels - Supplementary rules, German version CEN/TR 17080:2018
    4/1/2019 - PDF - German - DIN
    Learn More
    €73.93

  • DIN CEN/TR 17081*DIN SPEC 18146:2019-04

    Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners, German version CEN/TR 17081:2018
    4/1/2019 - PDF - German - DIN
    Learn More
    €52.80

  • UNE-CEN/TR 17079:2018

    Design of fastenings for use in concrete - Redundant non-structural systems (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-CEN/TR 17080:2018

    Design of fastenings for use in concrete - Anchor channels - Supplementary rules (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €71.00

  • UNE-CEN/TR 17081:2018

    Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €60.00

  • FD CEN/TR 17079, E27-818 (03/2019)

    Design of fastenings for use in concrete - Redundant non-structural systems
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €48.00

  • ISO/TR 20491:2019

    Fasteners
    Fundamentals of hydrogen embrittlement in steel fasteners
    2/19/2019 - Paper - French - ISO
    Learn More
    €148.00

  • ISO/TR 20491:2019

    Fasteners
    Fundamentals of hydrogen embrittlement in steel fasteners
    2/19/2019 - Paper - English - ISO
    Learn More
    €148.00

  • UNE-EN ISO 16228:2018

    Fasteners - Types of inspection documents (ISO 16228:2017)
    12/26/2018 - PDF - Spanish - AENOR
    Learn More
    €78.00

  • UNE-EN ISO 16228:2018

    Fasteners - Types of inspection documents (ISO 16228:2017)
    12/26/2018 - PDF - English - AENOR
    Learn More
    €93.60

  • DIN EN ISO 10683:2018-11

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018), German version EN ISO 10683:2018
    11/1/2018 - PDF - German - DIN
    Learn More
    €115.33

  • BS EN 14399-8:2018

    High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut
    10/31/2018 - PDF - English - BSI
    Learn More
    €250.00

  • NBN EN ISO 10683:2018

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    10/30/2018 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN ISO 10683:2018

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    10/30/2018 - PDF - German - NBN
    Learn More
    €142.00

  • NBN EN ISO 10683:2018

    Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
    10/30/2018 - PDF - English - NBN
    Learn More
    €142.00

  • PD CEN/TR 17080:2018

    Design of fastenings for use in concrete. Anchor channels. Supplementary rules
    10/8/2018 - PDF - English - BSI
    Learn More
    €250.00

  • PD CEN/TR 17079:2018

    Design of fastenings for use in concrete. Redundant non-structural systems
    10/5/2018 - PDF - English - BSI
    Learn More
    €151.00

  • PD CEN/TR 17081:2018

    Design of fastenings for use in concrete. Plastic design of fastenings with headed and post-installed fasteners
    10/4/2018 - PDF - English - BSI
    Learn More
    €180.00

  • VDI/VDE-MT 2637 Blatt 1:2018-10

    Qualification in fastening technology - Appropriate qualification for employees and executives
    10/1/2018 - PDF - English, German - VDI
    Learn More
    €203.50

  • CEN/TR 17081:2018

    Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
    9/28/2018 - PDF - French - NBN
    Learn More
    €89.00

  • CEN/TR 17080:2018

    Design of fastenings for use in concrete - Anchor channels - Supplementary rules
    9/28/2018 - PDF - French - NBN
    Learn More
    €142.00

  • CEN/TR 17079:2018

    Design of fastenings for use in concrete - Redundant non-structural systems
    9/28/2018 - PDF - French - NBN
    Learn More
    €58.00

  • CEN/TR 17081:2018

    Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
    9/28/2018 - PDF - English - NBN
    Learn More
    €89.00

  • CEN/TR 17080:2018

    Design of fastenings for use in concrete - Anchor channels - Supplementary rules
    9/28/2018 - PDF - English - NBN
    Learn More
    €142.00

  • CEN/TR 17079:2018

    Design of fastenings for use in concrete - Redundant non-structural systems
    9/28/2018 - PDF - English - NBN
    Learn More
    €58.00

  • BS EN ISO 10683:2018

    Fasteners. Non-electrolytically applied zinc flake coating systems
    9/27/2018 - PDF - English - BSI
    Learn More
    €293.00

  • DIN EN ISO 1891-4:2018-09

    Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018), Multilingual version EN ISO 1891-4:2018
    9/1/2018 - PDF - Chinese, English, French, German, Italian, Japanese, Russian, Swedish - DIN
    Learn More
    €131.96

  • NF EN 1992-4, E27-817 (09/2018)

    Eurocode 2 - Design of concrete structures - Part 4 : design of fastenings for use in concrete
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €192.00

  • NF EN ISO 10683, E25-040 (09/2018)

    Fasteners - Non-electrolytically applied zinc flake coatings systems - Fixations - Revêtements non électrolytiques de zinc lamellaire
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €99.00

  • NF E25-004 (09/2018)

    Fasteners - Short notations
    9/1/2018 - Paper - French - AFNOR
    Learn More
    €86.67

  • NBN EN 14399-8:2018

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    8/28/2018 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN 14399-8:2018

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    8/28/2018 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN 14399-8:2018

    High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    8/28/2018 - PDF - English - NBN
    Learn More
    €121.00

  • NBN EN 14399-7:2018

    Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 7 : Système HR - Boulons à tête fraisée (vis + écrou)
    8/28/2018 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN 14399-7:2018

    Hochfeste vorspannbare Garnituren für Schraubverbindungen im Metallbau - Teil 7: System HR - Garnituren aus Senkschrauben und Muttern
    8/28/2018 - PDF - German - NBN
    Learn More
    €142.00

  • NBN EN 14399-7:2018

    High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    8/28/2018 - PDF - English - NBN
    Learn More
    €142.00

  • ISO 10683:2018 (R2023)

    Fasteners
    Non-electrolytically applied zinc flake coating systems
    8/13/2018 - Paper - French - ISO
    Learn More
    €174.00

  • ISO 10683:2018 (R2023)

    Fasteners
    Non-electrolytically applied zinc flake coating systems
    8/13/2018 - Paper - English - ISO
    Learn More
    €174.00

  • BS EN 14399-7:2018

    High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut
    8/2/2018 - PDF - English - BSI
    Learn More
    €250.00

  • DIN 15922:2018-08

    Entertainment technology - Fastening points and fixtures for work equipment.
    8/1/2018 - PDF - German - DIN
    Learn More
    €79.72

  • NBN EN ISO 1891-4:2018

    Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
    7/25/2018 - PDF - French - NBN
    Learn More
    €37.00

  • NBN EN ISO 1891-4:2018

    Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
    7/25/2018 - PDF - English - NBN
    Learn More
    €37.00

  • NF EN 14399-8, E25-801-8 (07/2018)

    High-strength structural bolting assemblies for preloading - Part 8 : system HV - Hexagon fit bolt and nut assemblies
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN 14399-7, E25-801-7 (07/2018)

    High-strength structural bolting assemblies for preloading - Part 7 : system HR - Countersunk head bolt and nut assemblies
    7/1/2018 - Paper - French - AFNOR
    Learn More
    €86.50

  • BS EN ISO 1891-4:2018

    Fasteners. Vocabulary Control, inspection, delivery, acceptance and quality
    6/29/2018 - PDF - English - BSI
    Learn More
    €348.00

  • NF EN ISO 1891-4, E25-013-4 (06/2018)

    : Fasteners - Vocabulary - Part 4 : Control, inspection, delivery, acceptance and quality - Fixations - Terminologie - Partie 4 : Contrôles, livraisons, acceptations et qualité
    6/1/2018 - Paper - English, French, German, Russian - AFNOR
    Learn More
    €98.00

  • NBN EN 14399-9:2018

    High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
    5/29/2018 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN 14399-9:2018

    High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
    5/29/2018 - PDF - German - NBN
    Learn More
    €142.00

  • NBN EN 14399-9:2018

    High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
    5/29/2018 - PDF - English - NBN
    Learn More
    €142.00

  • NBN EN 14399-10:2018

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    5/29/2018 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN 14399-10:2018

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    5/29/2018 - PDF - German - NBN
    Learn More
    €142.00

  • NBN EN 14399-10:2018

    High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
    5/29/2018 - PDF - English - NBN
    Learn More
    €142.00

  • BS EN 14399-10:2018

    High-strength structural bolting assemblies for preloading System HRC. Bolt and nut with calibrated preload
    5/22/2018 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN 14399-9:2018

    High-strength structural bolting assemblies for preloading System HR or HV. Direct tension indicators bolt and nut
    5/22/2018 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN ISO 16228:2018-05

    Fasteners - Types of inspection documents (ISO 16228:2017)
    5/1/2018 - PDF - English - DIN
    Learn More
    €131.40

  • DIN EN ISO 16228:2018-05

    Fasteners - Types of inspection documents (ISO 16228:2017), German version EN ISO 16228:2018
    5/1/2018 - PDF - German - DIN
    Learn More
    €104.95

  • NF EN 14399-9, E25-801-9 (05/2018)

    High-strength structural bolting assemblies for preloading - Part 9 : system HR or HV - Direct tension indicators for bolt and nut assemblies
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €86.50

  • UNE-EN 15048-1:2018

    Non-preloaded structural bolting assemblies - Part 1: General requirements
    3/21/2018 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • UNE-EN 15048-1:2018

    Non-preloaded structural bolting assemblies - Part 1: General requirements
    3/21/2018 - PDF - English - AENOR
    Learn More
    €87.60

  • NBN EN ISO 16228:2018

    Fasteners - Types of inspection documents (ISO 16228:2017)
    2/28/2018 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN ISO 16228:2018

    Fasteners - Types of inspection documents (ISO 16228:2017)
    2/28/2018 - PDF - German - NBN
    Learn More
    €121.00

  • NBN EN ISO 16228:2018

    Fasteners - Types of inspection documents (ISO 16228:2017)
    2/28/2018 - PDF - English - NBN
    Learn More
    €121.00

  • BS EN ISO 16228:2018

    Fasteners. Types of inspection documents
    2/21/2018 - PDF - English - BSI
    Learn More
    €293.00

  • JASO F208:2018

    Automotive parts - Plastic clips for interior and exterior
    1/1/2018 - PDF - Japanese - JSAE
    Learn More
    €52.00

  • UNE-EN 15048-2:2017

    Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
    12/13/2017 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN 15048-2:2017

    Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
    12/13/2017 - PDF - English - AENOR
    Learn More
    €72.00

  • FD P06-029 (12/2017)

    Earthquake-resistant construction rules - Design of anchorages in earthquake zones
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €144.67

  • ISO 16228:2017 (R2022)

    Fasteners
    Types of inspection documents
    11/29/2017 - Paper - French - ISO
    Learn More
    €148.00

  • ISO 16228:2017 (R2022)

    Fasteners
    Types of inspection documents
    11/29/2017 - Paper - English - ISO
    Learn More
    €148.00

  • ASTM F2328-17(2022)

    Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
    9/1/2017 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM F2328-17(2022) + Redline

    Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
    9/1/2017 - PDF - English - ASTM
    Learn More
    €57.00

  • ASTM F2328M-17(2022)

    Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
    9/1/2017 - PDF - English - ASTM
    Learn More
    €54.00

  • ASTM F2328M-17(2022) + Redline

    Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
    9/1/2017 - PDF - English - ASTM
    Learn More
    €65.00

  • DIN 918 Beiblatt 3:2017-08

    Fasteners - Supplement 3: European Standards - Survey
    8/1/2017 - PDF - English - DIN
    Learn More
    €91.12

  • DIN 918 Beiblatt 3:2017-08

    Fasteners - Supplement 3: European Standards - Survey
    8/1/2017 - PDF - German - DIN
    Learn More
    €72.80

  • ASTM G198-17(2023)

    Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
    5/15/2017 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM G198-17(2023) + Redline

    Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
    5/15/2017 - PDF - English - ASTM
    Learn More
    €72.00

  • ASTM A453/A453M-17

    Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
    5/1/2017 - PDF - English - ASTM
    Learn More
    €51.00

  • ASTM A453/A453M-17 + Redline

    Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
    5/1/2017 - PDF - English - ASTM
    Learn More
    €61.00

  • ASTM F2437/F2437M-17(2023)

    Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
    3/15/2017 - PDF - English - ASTM
    Learn More
    €60.00

  • ASTM F2437/F2437M-17(2023) + Redline

    Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
    3/15/2017 - PDF - English - ASTM
    Learn More
    €72.00

  • SAE J 1701:2017-02-09

    Torque-Tension Tightening for Inch Series Fasteners
    2/9/2017 - PDF - English - SAE
    Learn More
    €60.00

Items 1 to 200 of 462 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3