21.060 : Fasteners
-
€93.00
-
DIN EN ISO 15480:2019-10
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019), German version EN ISO 15480:2019
10/1/2019 - PDF - German -
Learn More€59.63 -
NF EN ISO 10642, E25-146 (10/2019)
Fasteners - Hexagon socket countersunk head screws with reduced loadability
10/1/2019 - Paper - French -
Learn More€60.50 -
DIN EN ISO 7053:2019-10
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019), German version EN ISO 7053:2019
10/1/2019 - PDF - German -
Learn More€59.63 -
DIN 85339:2019-09
Hexagon head screw plugs - With retaining pin and bleeding hole
9/1/2019 - PDF - German -
Learn More€52.90 -
€60.50
-
NBN EN ISO 7053:2019
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
8/28/2019 - PDF - German -
Learn More€37.00 -
NBN EN ISO 15480:2019
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
8/28/2019 - PDF - English -
Learn More€37.00 -
NBN EN ISO 15480:2019
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
8/28/2019 - PDF - French -
Learn More€37.00 -
NBN EN ISO 7053:2019
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
8/28/2019 - PDF - English -
Learn More€37.00 -
NBN EN ISO 7053:2019
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
8/28/2019 - PDF - French -
Learn More€37.00 -
NBN EN ISO 15480:2019
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
8/28/2019 - PDF - German -
Learn More€37.00 -
SAE J 174:2019-08-07
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series (Stabilized: Aug 2019)
8/7/2019 - PDF - English -
Learn More€60.00 -
ASTM F1025-19 + Redline
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
8/1/2019 - PDF - English -
Learn More€53.00 -
ASTM F1025-19
Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
8/1/2019 - PDF - English -
Learn More€46.00 -
€72.00
-
€151.00
-
BS EN ISO 15480:2019
Fasteners. Hexagon washer head drilling screws with tapping screw thread
7/19/2019 - PDF - English -
Learn More€151.00 -
NF EN ISO 15480, E25-856 (07/2019)
Fasteners - Hexagon washer head drilling screws with tapping screw thread - Vis autoperceuses à tête hexagonale à ambase plate, avec filetage de vis à tôle
7/1/2019 - Paper - French -
Learn More€48.00 -
NF EN ISO 7053, E25-665 (07/2019)
Fasteners - Hexagon washer head tapping screws - Vis à tôle à tête hexagonale à embase plate
7/1/2019 - Paper - French -
Learn More€48.00 -
ASTM F1137/F1137M-19
Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
6/15/2019 - PDF - English -
Learn More€46.00 -
ASTM F1137/F1137M-19 + Redline
Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
6/15/2019 - PDF - English -
Learn More€53.00 -
DIN EN 14399-10:2019-06
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload, German version EN 14399-10:2018
6/1/2019 - PDF - German -
Learn More€92.62 -
DIN EN 14399-7:2019-06
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies, German version EN 14399-7:2018
6/1/2019 - PDF - German -
Learn More€92.62 -
€0.00
-
DIN EN 14399-9:2019-06
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies, German version EN 14399-9:2018
6/1/2019 - PDF - German -
Learn More€92.62 -
DIN EN 14399-8:2019-06
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies, German version EN 14399-8:2018
6/1/2019 - PDF - German -
Learn More€79.72 -
SAE J 2295M:2019-05-10
Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric) (Stabilized: May 2019)
5/10/2019 - PDF - English -
Learn More€111.00 -
PR NF EN ISO 2702, E25-650-1PR (05/2019)
Fixations - Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques et physiques
5/1/2019 - Paper - English, French -
Learn More€60.48 -
DIN EN ISO 8734:2019-05
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) (ISO 8734:1997), German version EN ISO 8734:1997
5/1/2019 - PDF - German -
Learn More€52.90 -
DIN EN ISO 7092:2019-05
Plain washers - Small series - Product grade A (ISO 7092:2000), German version EN ISO 7092:2000
5/1/2019 - PDF - German -
Learn More€65.89 -
NF E25-805 (05/2019)
High-strength structural bolting assemblies for preloading - System HR - Hexagon bolt + nut + washers assemblies with diameters M39 to M72
5/1/2019 - Paper - French -
Learn More€86.67 -
UNE-EN ISO 10683:2019
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
4/30/2019 - PDF - Spanish -
Learn More€85.00 -
UNE-EN ISO 10683:2019
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
4/30/2019 - PDF - English -
Learn More€102.00 -
UNE-EN ISO 888:2019
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
4/24/2019 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 898-3:2019
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
4/24/2019 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 1891-4:2019
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
4/24/2019 - PDF - Spanish -
Learn More€69.00 -
UNE-EN ISO 888:2019
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
4/24/2019 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 1891-4:2019
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
4/24/2019 - PDF - English -
Learn More€82.80 -
UNE-EN ISO 898-3:2019
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
4/24/2019 - PDF - Spanish -
Learn More€70.00 -
UNE-EN 14399-9:2019
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
4/17/2019 - PDF - English -
Learn More€88.80 -
UNE-EN 14399-10:2019
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
4/17/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 14399-9:2019
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
4/17/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 14399-10:2019
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
4/17/2019 - PDF - English -
Learn More€88.80 -
19/30351951 DC:2019
BS EN ISO 2702. Fasteners. Heat-treated self-tapping screws. Mechanical and physical properties
4/12/2019 - PDF - English -
Learn More€24.00 -
UNE-EN 14399-7:2019
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
4/10/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 14399-8:2019
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
4/10/2019 - PDF - English -
Learn More€84.00 -
UNE-EN 14399-7:2019
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
4/10/2019 - PDF - English -
Learn More€88.80 -
UNE-EN 14399-8:2019
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
4/10/2019 - PDF - Spanish -
Learn More€70.00 -
€32.34
-
DIN EN ISO 7091:2019-04
Plain washers - Normal series - Product grade C (ISO 7091:2000), German version EN ISO 7091:2000
4/1/2019 - PDF - German -
Learn More€59.63 -
DIN CEN/TR 17081*DIN SPEC 18146:2019-04
Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners, German version CEN/TR 17081:2018
4/1/2019 - PDF - German -
Learn More€52.80 -
UNE-CEN/TR 17080:2018
Design of fastenings for use in concrete - Anchor channels - Supplementary rules (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More€71.00 -
DIN CEN/TR 17079*DIN SPEC 18144:2019-04
Design of fastenings for use in concrete - Redundant non-structural systems, German version CEN/TR 17079:2018
4/1/2019 - PDF - German -
Learn More€42.43 -
FD CEN/TR 17081, E27-821 (04/2019)
Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
4/1/2019 - Paper - French -
Learn More€60.67 -
UNE-CEN/TR 17081:2018
Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More€60.00 -
DIN CEN/TR 17080*DIN SPEC 18145:2019-04
Design of fastenings for use in concrete - Anchor channels - Supplementary rules, German version CEN/TR 17080:2018
4/1/2019 - PDF - German -
Learn More€73.93 -
UNE-CEN/TR 17079:2018
Design of fastenings for use in concrete - Redundant non-structural systems (Endorsed by Asociación Española de Normalización in April of 2019.)
4/1/2019 - PDF - English -
Learn More€42.00 -
FD CEN/TR 17079, E27-818 (03/2019)
Design of fastenings for use in concrete - Redundant non-structural systems
3/1/2019 - Paper - French -
Learn More€48.00 -
€45.98
-
ISO/TR 20491:2019
Fasteners
Fundamentals of hydrogen embrittlement in steel fasteners
2/19/2019 - Paper - French -
Learn More€148.00 -
ISO/TR 20491:2019
Fasteners
Fundamentals of hydrogen embrittlement in steel fasteners
2/19/2019 - Paper - English -
Learn More€148.00 -
DIN 3292:2019-02
Fittings for domestic installation - Nonferrous metal union nuts
2/1/2019 - PDF - German -
Learn More€39.35 -
€0.00
-
€0.00
-
€52.00
-
€48.00
-
€78.00
-
€93.60
-
18/30374657 DC:2018
BS ENISO 13918:2017 AMD 1. Welding. Studs and ceramic ferrules for arc stud welding
12/11/2018 - PDF - English -
Learn More€24.00 -
DIN 34805-2:2018-12
Button head screws - Part 2: Screws with collar and driving feature hexalobular socket
12/1/2018 - PDF - German -
Learn More€45.98 -
€39.35
-
DIN 34805-1:2018-12
Button head screws - Part 1: Driving feature hexalobular socket
12/1/2018 - PDF - German -
Learn More€45.98 -
ASTM F3329-18 + Redline
Standard Specification for Carbon and Alloy Steel Metric Rivets
11/15/2018 - PDF - English -
Learn More€53.00 -
ASTM F3329-18
Standard Specification for Carbon and Alloy Steel Metric Rivets
11/15/2018 - PDF - English -
Learn More€46.00 -
NF E25-139 (11/2018)
Screws - Z cross recessed and slotted pan head - Symbol CBL ZS
11/1/2018 - Paper - French -
Learn More€48.00 -
€75.67
-
DIN EN ISO 10683:2018-11
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018), German version EN ISO 10683:2018
11/1/2018 - PDF - German -
Learn More€115.33 -
NF E25-129 (11/2018)
Screws - Large round flat « poêlier » head with reduced loadability, slotted - Symbol RL S
11/1/2018 - Paper - French -
Learn More€48.00 -
BS EN 14399-8:2018
High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut
10/31/2018 - PDF - English -
Learn More€250.00 -
NBN EN ISO 10683:2018
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
10/30/2018 - PDF - English -
Learn More€142.00 -
NBN EN ISO 10683:2018
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
10/30/2018 - PDF - French -
Learn More€142.00 -
NBN EN ISO 10683:2018
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)
10/30/2018 - PDF - German -
Learn More€142.00 -
PD CEN/TR 17080:2018
Design of fastenings for use in concrete. Anchor channels. Supplementary rules
10/8/2018 - PDF - English -
Learn More€250.00 -
PD CEN/TR 17079:2018
Design of fastenings for use in concrete. Redundant non-structural systems
10/5/2018 - PDF - English -
Learn More€151.00 -
PD CEN/TR 17081:2018
Design of fastenings for use in concrete. Plastic design of fastenings with headed and post-installed fasteners
10/4/2018 - PDF - English -
Learn More€180.00 -
NF E25-404 (10/2018)
Square regular nuts (style 1) - Product grade C - Symbol Q - Ecrous carrés normaux (style 1) - Grade C - Symbole Q
10/1/2018 - Paper - French -
Learn More€48.00 -
NF E25-122 (10/2018)
Screws - Z Cross recessed mushroom head ''poeliers'' with reduced loadability - Symbol RL Z
10/1/2018 - Paper - French -
Learn More€48.00 -
€39.35
-
CEN/TR 17080:2018
Design of fastenings for use in concrete - Anchor channels - Supplementary rules
9/28/2018 - PDF - English -
Learn More€142.00 -
CEN/TR 17081:2018
Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
9/28/2018 - PDF - French -
Learn More€89.00 -
CEN/TR 17079:2018
Design of fastenings for use in concrete - Redundant non-structural systems
9/28/2018 - PDF - English -
Learn More€58.00 -
CEN/TR 17080:2018
Design of fastenings for use in concrete - Anchor channels - Supplementary rules
9/28/2018 - PDF - French -
Learn More€142.00 -
CEN/TR 17081:2018
Design of fastenings for use in concrete - Plastic design of fastenings with headed and post-installed fasteners
9/28/2018 - PDF - English -
Learn More€89.00 -
CEN/TR 17079:2018
Design of fastenings for use in concrete - Redundant non-structural systems
9/28/2018 - PDF - French -
Learn More€58.00 -
BS EN ISO 10683:2018
Fasteners. Non-electrolytically applied zinc flake coating systems
9/27/2018 - PDF - English -
Learn More€293.00 -
DIN EN ISO 1891-4:2018-09
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018), Multilingual version EN ISO 1891-4:2018
9/1/2018 - PDF - Chinese, English, French, German, Italian, Japanese, Russian, Swedish -
Learn More€131.96 -
NF EN 1992-4, E27-817 (09/2018)
Eurocode 2 - Design of concrete structures - Part 4 : design of fastenings for use in concrete
9/1/2018 - Paper - French -
Learn More€192.00 -
DIN 34825:2018-09
Cylindrical head screws with inner contact flange - Driving feature 12 point socket
9/1/2018 - PDF - German -
Learn More€39.35 -
NF EN ISO 10683, E25-040 (09/2018)
Fasteners - Non-electrolytically applied zinc flake coatings systems - Fixations - Revêtements non électrolytiques de zinc lamellaire
9/1/2018 - Paper - French -
Learn More€99.00 -
€86.67
-
NBN EN 14399-7:2018
Hochfeste vorspannbare Garnituren für Schraubverbindungen im Metallbau - Teil 7: System HR - Garnituren aus Senkschrauben und Muttern
8/28/2018 - PDF - German -
Learn More€142.00 -
NBN EN 14399-8:2018
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
8/28/2018 - PDF - English -
Learn More€121.00 -
NBN EN 14399-8:2018
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
8/28/2018 - PDF - French -
Learn More€121.00 -
NBN EN 14399-7:2018
Boulonnerie de construction métallique à haute résistance apte à la précontrainte - Partie 7 : Système HR - Boulons à tête fraisée (vis + écrou)
8/28/2018 - PDF - French -
Learn More€142.00 -
NBN EN 14399-7:2018
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
8/28/2018 - PDF - English -
Learn More€142.00 -
NBN EN 14399-8:2018
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
8/28/2018 - PDF - German -
Learn More€121.00 -
€86.00
-
ISO 10683:2018 (R2023)
Fasteners
Non-electrolytically applied zinc flake coating systems
8/13/2018 - Paper - French -
Learn More€174.00 -
ISO 10683:2018 (R2023)
Fasteners
Non-electrolytically applied zinc flake coating systems
8/13/2018 - Paper - English -
Learn More€174.00 -
BS EN 14399-7:2018
High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut
8/2/2018 - PDF - English -
Learn More€250.00 -
DIN EN ISO 888:2018-08
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012), German version EN ISO 888:2018
8/1/2018 - PDF - German -
Learn More€59.63 -
DIN 15922:2018-08
Entertainment technology - Fastening points and fixtures for work equipment.
8/1/2018 - PDF - German -
Learn More€79.72 -
NBN EN ISO 1891-4:2018
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
7/25/2018 - PDF - English -
Learn More€37.00 -
NBN EN ISO 898-3:2018
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
7/25/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 898-3:2018
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 3: Flache Scheiben mit festgelegten Festigkeitsklassen (ISO 898-3:2018)
7/25/2018 - PDF - German -
Learn More€89.00 -
NBN EN ISO 1891-4:2018
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)
7/25/2018 - PDF - French -
Learn More€37.00 -
NBN EN ISO 888:2018
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
7/25/2018 - PDF - English -
Learn More€37.00 -
NBN EN ISO 898-3:2018
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
7/25/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 888:2018
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
7/25/2018 - PDF - German -
Learn More€37.00 -
UNE-EN ISO 13918:2018
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
7/18/2018 - PDF - Spanish -
Learn More€78.00 -
UNE-EN ISO 13918:2018
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
7/18/2018 - PDF - English -
Learn More€93.60 -
BS EN ISO 888:2018
Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
7/11/2018 - PDF - English -
Learn More€151.00 -
NF EN 14399-8, E25-801-8 (07/2018)
High-strength structural bolting assemblies for preloading - Part 8 : system HV - Hexagon fit bolt and nut assemblies
7/1/2018 - Paper - French -
Learn More€75.67 -
VG 85539:2018-07
Non-magnetizable and stainless bolts and nuts - Materials and marking, Text in German and English
7/1/2018 - PDF - English, German -
Learn More€65.89 -
DIN 80705:2018-07
Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
7/1/2018 - PDF - German -
Learn More€39.35 -
NF EN 14399-7, E25-801-7 (07/2018)
High-strength structural bolting assemblies for preloading - Part 7 : system HR - Countersunk head bolt and nut assemblies
7/1/2018 - Paper - French -
Learn More€86.50 -
VG 85537:2018-07
Bolted connections with reduced shank - Studs, hexagon nuts, extension sleeves, Text in German and English
7/1/2018 - PDF - English, German -
Learn More€79.72 -
BS EN ISO 1891-4:2018
Fasteners. Vocabulary Control, inspection, delivery, acceptance and quality
6/29/2018 - PDF - English -
Learn More€348.00 -
NF EN ISO 898-3, E25-500 (06/2018)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3 : flat washers with specified property classes
6/1/2018 - Paper - French -
Learn More€75.50 -
NF EN ISO 1891-4, E25-013-4 (06/2018)
: Fasteners - Vocabulary - Part 4 : Control, inspection, delivery, acceptance and quality - Fixations - Terminologie - Partie 4 : Contrôles, livraisons, acceptations et qualité
6/1/2018 - Paper - English, French, German, Russian -
Learn More€98.00 -
NF EN ISO 888, E25-024 (06/2018)
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths
6/1/2018 - Paper - French -
Learn More€46.55 -
NBN EN 14399-10:2018
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
5/29/2018 - PDF - German -
Learn More€142.00 -
NBN EN 14399-9:2018
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
5/29/2018 - PDF - German -
Learn More€142.00 -
NBN EN 14399-10:2018
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
5/29/2018 - PDF - English -
Learn More€142.00 -
NBN EN 14399-9:2018
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
5/29/2018 - PDF - English -
Learn More€142.00 -
NBN EN 14399-10:2018
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
5/29/2018 - PDF - French -
Learn More€142.00 -
NBN EN 14399-9:2018
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
5/29/2018 - PDF - French -
Learn More€142.00 -
ISO 898-3:2018 (R2023)
Mechanical properties of fasteners made of carbon steel and alloy steel
Part 3: Flat washers with specified property classes
5/28/2018 - Paper - French -
Learn More€110.00 -
ISO 898-3:2018 (R2023)
Mechanical properties of fasteners made of carbon steel and alloy steel
Part 3: Flat washers with specified property classes
5/28/2018 - Paper - English -
Learn More€110.00 -
BS EN 14399-10:2018
High-strength structural bolting assemblies for preloading System HRC. Bolt and nut with calibrated preload
5/22/2018 - PDF - English -
Learn More€250.00 -
BS EN 14399-9:2018
High-strength structural bolting assemblies for preloading System HR or HV. Direct tension indicators bolt and nut
5/22/2018 - PDF - English -
Learn More€250.00 -
DIN EN ISO 16228:2018-05
Fasteners - Types of inspection documents (ISO 16228:2017), German version EN ISO 16228:2018
5/1/2018 - PDF - German -
Learn More€104.95 -
ASTM A531/A531M-18(2023) + Redline
Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
5/1/2018 - PDF - English -
Learn More€65.00 -
€131.40
-
ASTM A531/A531M-18(2023)
Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
5/1/2018 - PDF - English -
Learn More€54.00 -
NF EN 14399-10, E25-801-10 (05/2018)
High-strength structural bolting assemblies for preloading - Part 10 : system HRC - Bolt and nut assemblies with calibrated preload
5/1/2018 - Paper - French -
Learn More€86.50 -
NF EN 14399-9, E25-801-9 (05/2018)
High-strength structural bolting assemblies for preloading - Part 9 : system HR or HV - Direct tension indicators for bolt and nut assemblies
5/1/2018 - Paper - French -
Learn More€86.50 -
DVS 2242-1 Beiblatt 2:2018-05
Mechanisches Fügen von Kunststoffbauteilen - Komplexe Schnappsysteme
5/1/2018 - PDF - German -
Learn More€39.50 -
SAE J 2486:2018-04-24
Tension Indicating Washer Tightening Method for Fasteners (Stabilized: Apr 2018)
4/24/2018 - PDF - English -
Learn More€93.00 -
ASTM C1513-18
Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
4/1/2018 - PDF - English -
Learn More€51.00 -
€72.80
-
€45.98
-
ASTM C1513-18 + Redline
Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
4/1/2018 - PDF - English -
Learn More€61.00 -
VG 95659:2018-04
Fasteners - Bushes, welded, with internal thread, Text in German and English
4/1/2018 - PDF - English, German -
Learn More€59.63 -
€79.07
-
€59.63
-
€71.50
-
€65.89
-
UNE-EN 15048-1:2018
Non-preloaded structural bolting assemblies - Part 1: General requirements
3/21/2018 - PDF - Spanish -
Learn More€73.00 -
UNE-EN 15048-1:2018
Non-preloaded structural bolting assemblies - Part 1: General requirements
3/21/2018 - PDF - English -
Learn More€87.60 -
€47.00
-
€53.00
-
€46.00
-
€121.00
-
NBN EN ISO 13918:2018
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
2/28/2018 - PDF - German -
Learn More€121.00 -
€121.00
-
NBN EN ISO 13918:2018
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
2/28/2018 - PDF - English -
Learn More€121.00 -
€121.00
-
NBN EN ISO 13918:2018
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
2/28/2018 - PDF - French -
Learn More€121.00 -
€293.00
-
VdS 2100-10:2018-02
VdS-Richtlinien für Wasserlöschanlagen - Rohrbefestigungen - Anforderungen und Prüfmethoden
2/1/2018 - - -
Learn More€26.88 -
€52.00
-
€52.90
-
€59.63
-
€52.00
-
€52.00
-
€52.00
-
€52.90
-
€86.50
-
€52.90
-
UNE-EN ISO 4759-3:2017
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
12/13/2017 - PDF - English -
Learn More€81.60 -
UNE-EN 15048-2:2017
Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
12/13/2017 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 2320:2017
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
12/13/2017 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 4759-3:2017
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
12/13/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 15048-2:2017
Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
12/13/2017 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 2320:2017
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
12/13/2017 - PDF - English -
Learn More€88.80 -
FD P06-029 (12/2017)
Earthquake-resistant construction rules - Design of anchorages in earthquake zones
12/1/2017 - Paper - French -
Learn More€144.67 -
€148.00
-
€148.00
-
€148.00
-
€148.00
-
€39.35
-
ASTM F2328M-17(2022) + Redline
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
9/1/2017 - PDF - English -
Learn More€65.00 -
ASTM F2328-17(2022) + Redline
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
9/1/2017 - PDF - English -
Learn More€57.00 -
ASTM F2328M-17(2022)
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
9/1/2017 - PDF - English -
Learn More€54.00 -
ASTM F2328-17(2022)
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
9/1/2017 - PDF - English -
Learn More€48.00 -
€59.63
-
€72.80
-
€71.50