21.060 : Fasteners
-
DIN EN 22341:1992-10
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
10/1/1992 - PDF - German - DIN
Learn More€45.98 -
DIN EN 22341:1992-10
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
10/1/1992 - PDF - English - DIN
Learn More€57.57 -
DIN EN 27434:1992-10
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27434:1992-10
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 27435:1992-10
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27435:1992-10
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 27436:1992-10
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27436:1992-10
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 28738:1992-10
Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 28738:1992-10
Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 22339:1992-10
Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992
10/1/1992 - PDF - German - DIN
Learn More€45.98 -
DIN EN 22339:1992-10
Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992
10/1/1992 - PDF - English - DIN
Learn More€57.57 -
DIN EN 28736:1992-10
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992
10/1/1992 - PDF - German - DIN
Learn More€45.98 -
DIN EN 28736:1992-10
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992
10/1/1992 - PDF - English - DIN
Learn More€57.57 -
DIN EN 28737:1992-10
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992
10/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 28737:1992-10
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992
10/1/1992 - PDF - English - DIN
Learn More€49.16 -
DIN EN 28749:1992-10
Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
10/1/1992 - PDF - German - DIN
Learn More€32.34 -
DIN EN 28749:1992-10
Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
10/1/1992 - PDF - English - DIN
Learn More€40.56 -
NF EN 20273, E25-023 (06/1992) (R2002)
Fasteners. Clearance hole for bolts and screws. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€60.50 -
NF EN 26157-1, E25-100-3 (06/1992) (R2002)
Fasteners. Surface discontinuities. Part 1 : bolts, screws and studs for general requirements. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€86.50 -
NF EN 26157-3, E25-100-4 (06/1992) (R2002)
Fasteners. Surface discontinuties. Part 3 : bolts, screw and studs for special requirements. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€75.50 -
NF EN 27721, E25-018 (06/1992)
Fasteners. Countersunk head screws. Head configuration and gauging. - Éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€75.50 -
NF EN 28839, E25-011 (06/1992) (R2002)
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals. - Caractéristiques mécaniques des éléments de fixation
6/1/1992 - Paper - French - AFNOR
Learn More€60.50 -
€151.00 -
BS EN 26157-1:1992
Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
5/1/1992 - PDF - English - BSI
Learn More€180.00 -
€151.00 -
BS EN 26157-3:1992
Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements
4/1/1992 - PDF - English - BSI
Learn More€180.00 -
BS EN 28839:1992
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
4/1/1992 - PDF - English - BSI
Learn More€151.00 -
€97.01
-
NBN EN 20273:1992
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
2/29/1992 - PDF - French - NBN
Learn More€37.00 -
NBN EN 20273:1992
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
2/29/1992 - PDF - German - NBN
Learn More€37.00 -
NBN EN 20273:1992
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
2/29/1992 - PDF - English - NBN
Learn More€37.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - French - NBN
Learn More€58.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - German - NBN
Learn More€58.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - English - NBN
Learn More€58.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - French - NBN
Learn More€37.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - German - NBN
Learn More€37.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - English - NBN
Learn More€37.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - French - NBN
Learn More€58.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - German - NBN
Learn More€58.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - English - NBN
Learn More€58.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - French - NBN
Learn More€89.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - German - NBN
Learn More€89.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - English - NBN
Learn More€89.00 -
DIN EN 20273:1992-02
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
2/1/1992 - PDF - German - DIN
Learn More€32.34 -
DIN EN 20273:1992-02
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
2/1/1992 - PDF - English - DIN
Learn More€40.56 -
DIN EN 27721:1992-02
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
2/1/1992 - PDF - German - DIN
Learn More€39.35 -
DIN EN 27721:1992-02
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
2/1/1992 - PDF - English - DIN
Learn More€49.16 -
€25.00 -
DIN EN 26157-1:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
12/1/1991 - PDF - German - DIN
Learn More€59.63 -
DIN EN 26157-1:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
12/1/1991 - PDF - English - DIN
Learn More€74.58 -
DIN EN 26157-3:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
12/1/1991 - PDF - German - DIN
Learn More€72.80 -
DIN EN 26157-3:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
12/1/1991 - PDF - English - DIN
Learn More€91.12 -
DIN EN 28839:1991-12
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
12/1/1991 - PDF - German - DIN
Learn More€45.98 -
DIN EN 28839:1991-12
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
12/1/1991 - PDF - English - DIN
Learn More€57.57 -
BS 1981:1991
Specification for unified machine screws and machine screw nuts
8/30/1991 - PDF - English - BSI
Learn More€331.00 -
DIN 20594:1991-08
Suspension claws for mining, for loads up to 30 kN, requirements and testing
8/1/1991 - PDF - German - DIN
Learn More€32.34 -
BS 4377:1991
Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
5/31/1991 - PDF - English - BSI
Learn More€180.00 -
DIN 974-2:1991-05
Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
5/1/1991 - PDF - German - DIN
Learn More€32.34 -
DIN 974-2:1991-05
Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
5/1/1991 - PDF - English - DIN
Learn More€40.56 -
BS 7364:1990
Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
9/30/1990 - PDF - English - BSI
Learn More€151.00 -
UNE 68011:1990
AGRICULTURAL MACHINERY. STRING COTTERS OF A BOLT. SPECIFICATIONS.
9/18/1990 - PDF - Spanish - AENOR
Learn More€14.00 -
ISO 7721-2:1990 (R2019)
Countersunk flat head screws
Part 2: Penetration depth of cross recesses
8/23/1990 - Paper - French - ISO
Learn More€48.00 -
ISO 7721-2:1990 (R2019)
Countersunk flat head screws
Part 2: Penetration depth of cross recesses
8/23/1990 - Paper - English - ISO
Learn More€48.00 -
€32.34
-
€40.56
-
DIN 6918:1990-04
Square taper washers for high-strength structual bolting of steel channel sections
4/1/1990 - PDF - German - DIN
Learn More€32.34 -
DIN 6918:1990-04
Square taper washers for high-strength structual bolting of steel channel sections
4/1/1990 - PDF - English - DIN
Learn More€40.56 -
€25.00
-
€39.35
-
€49.16
-
€25.00
-
JIS D 4312:1990 (R2015)
Rivets of brake linings and clutch facings for automobiles
1/1/1990 - PDF - Japanese - JSA
Learn More€25.00 -
€32.50
-
€32.50
-
€32.34
-
DIN 6917:1989-10
Square taper washers for high-strength structural bolting of steel I sections
10/1/1989 - PDF - German - DIN
Learn More€32.34 -
DIN 6917:1989-10
Square taper washers for high-strength structural bolting of steel I sections
10/1/1989 - PDF - English - DIN
Learn More€40.56 -
NF E27-853 (09/1989)
Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications. - Colliers de serrage métalliques à usage général
9/1/1989 - Paper - French - AFNOR
Learn More€75.67 -
€45.98
-
€45.98
-
€39.35
-
UNE 68012:1989
AGRICULTURAL WHEELED TRACTORS. THREE-POINT-LINKAGE. LINCH PINS. DIMENSIONS.
3/21/1989 - PDF - Spanish - AENOR
Learn More€17.00 -
NF E27-851 (09/1988)
General purpose metallic hose clamps. Perforated strip screw type. Specifications. - Colliers de serrage métalliques à usage général
9/1/1988 - Paper - French - AFNOR
Learn More€60.67 -
NF E27-855 (09/1988)
General purpose metallic hose clamps. Worm drive type. Specifications. - Colliers de serrage métalliques à usage général
9/1/1988 - Paper - French - AFNOR
Learn More€60.67 -
€32.50
-
DIN 42013:1988-08
Spring washers for axial adjustment of ball bearings of small motors
8/1/1988 - PDF - German - DIN
Learn More€32.34 -
€72.00
-
€72.00
-
€110.00
-
€110.00
-
ISO 8678:1988 (R2020)
Cup head square neck bolts with small head and short neck
Product grade B
6/16/1988 - Paper - French - ISO
Learn More€48.00 -
ISO 8678:1988 (R2020)
Cup head square neck bolts with small head and short neck
Product grade B
6/16/1988 - Paper - English - ISO
Learn More€48.00 -
UNE 28640:1988
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
4/8/1988 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE 28640:1988
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
4/8/1988 - PDF - English - AENOR
Learn More€55.20 -
DIN 1592:1988-02
Heavy pipe clips with pipe-tightening; single-ended for rail vehicles
2/1/1988 - PDF - German - DIN
Learn More€32.34 -
DIN 1593:1988-02
Heavy pipe clips with pipe-tightening; double-ended for rail vehicles
2/1/1988 - PDF - German - DIN
Learn More€32.34 -
DIN 1596:1988-02
Light pipe clips with pipe-tightening; single-ended for rail vehicles
2/1/1988 - PDF - German - DIN
Learn More€32.34 -
DIN 1597:1988-02
Light pipe clips with pipe-tightening; double-ended for rail vehicles
2/1/1988 - PDF - German - DIN
Learn More€32.34 -
€32.50
-
BS 4185-14:1987
Machine tool components Method for determination of the pilot diameter 60° centre holes
12/31/1987 - PDF - English - BSI
Learn More€180.00 -
€32.50
-
€37.00
-
€37.00
-
€58.00
-
€58.00
-
€39.35
-
€49.16
-
ASME B18.18.1M-1987 (R1999) (R2006)
Inspection and Quality Assurance for General Purpose Fasteners
1/1/1987 - PDF DRM - English - ASME
Learn More€37.00 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
ISO 8736:1986 (R2022)
Taper pins with internal thread, unhardened
General information
11/6/1986 - Paper - French - ISO
Learn More€48.00 -
ISO 8737:1986 (R2022)
Taper pins with external thread, unhardened
General information
11/6/1986 - Paper - French - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
ISO 8736:1986 (R2022)
Taper pins with internal thread, unhardened
General information
11/6/1986 - Paper - English - ISO
Learn More€48.00 -
ISO 8737:1986 (R2022)
Taper pins with external thread, unhardened
General information
11/6/1986 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
E25-034 (10/1986) (R2011)
Fasteners with tightening washer. Combination guide for washer-screw and washer-nut.
10/1/1986 - Paper - French - AFNOR
Learn More€48.00 -
NF F03-003 (07/1986) (R2011)
Rolling stock - Notched head wood screws - Symbols F, FB and R
7/1/1986 - Paper - French - AFNOR
Learn More€34.67 -
E25-032 (03/1986) (R2011)
Fasteners. Coatings (and surface treatments) for protection against corrosion. Comparative presentment.
3/1/1986 - Paper - French - AFNOR
Learn More€60.67 -
€39.35
-
UIC 583:1986-01
Wagons - Application of a special mark on interchangeable parts
1/1/1986 - PDF - English - UIC
Learn More€41.00 -
€32.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€17.00
-
DIN 24536:1985-05
Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings
5/1/1985 - PDF - German - DIN
Learn More€39.35 -
DIN 24539-1:1985-05
Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth
5/1/1985 - PDF - German - DIN
Learn More€22.99 -
DIN 24539-2:1985-05
Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth
5/1/1985 - PDF - German - DIN
Learn More€22.99 -
DIN 24541:1985-05
Equipment for steelworks and rolling mills; shuttering steeves for anchor boxes according to DIN 24539; dimensions, designation
5/1/1985 - PDF - German - DIN
Learn More€22.99 -
BS 4185-13:1985
Machine tool components Specification for dimensions of counterbored holes
4/30/1985 - PDF - English - BSI
Learn More€89.00 -
€14.00
-
JIS B 1001:1985 (R2014)
Diameter of clearance holes and counterbores for bolts and screws
3/1/1985 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€151.00
-
€17.00
-
€14.00
-
€17.00
-
NF E25-659 (12/1984)
Tapping screws. Cross recessed mushroom head ("poelier"). Symbol RL Z.
12/1/1984 - Paper - French - AFNOR
Learn More€34.50 -
€48.00
-
BS 6487:1984
Specification for split pin holes and wire holes in bolts, screws and studs
3/30/1984 - PDF - English - BSI
Learn More€151.00 -
NF F03-004 (11/1983) (R2013)
Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-005 (11/1983) (R2013)
Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-006 (11/1983) (R2013)
Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-016 (11/1983) (R2013)
Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-007 (11/1983) (R2013)
Railway rolling stock - Grade A - Round head and domed head nuts - Symbols R and CR
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
€48.00
-
€48.00
-
€48.00
-
ISO 7435:1983 (R1988)
Slotted set screws with long dog point
General information
9/1/1983 - Paper - French - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
€48.00
-
ISO 7435:1983 (R1988)
Slotted set screws with long dog point
General information
9/1/1983 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
€72.00
-
€72.00
-
NF E25-655 (05/1983) (R2013)
Round head tapping screws with six lobes recess. Symbol RLX .
5/1/1983 - Paper - French - AFNOR
Learn More€48.00 -
DIN 5290-1:1983-04
Snap hook from light metal, with setting nut, dimensions, requirements and testing
4/1/1983 - PDF - German - DIN
Learn More€32.34 -
ISO 4755:1983 (R2023)
Fasteners
Thread undercuts for external metric ISO threads
2/1/1983 - Paper - French - ISO
Learn More€48.00 -
ISO 4755:1983 (R2023)
Fasteners
Thread undercuts for external metric ISO threads
2/1/1983 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
NF E27-854 (12/1982)
Metal-hose clamps for general purposes - Band type, without screws, re-usable, pin or axle clamps.
12/1/1982 - Paper - French - AFNOR
Learn More€48.00 -
€34.67
-
PD 6507:1982
Guidance on metric screw threads and fasteners for use by model engineers
9/30/1982 - PDF - English - BSI
Learn More€151.00 -
BS 4168-7:1982 (R2017)
Hexagon socket screws and wrench keys: metric series Specification for hexagon shoulder
8/31/1982 - PDF - English - BSI
Learn More€151.00 -
BS 4168-6:1982 (R2013)
Hexagon socket screws and wrench keys: metric series Specification for hexagon button head
8/31/1982 - PDF - English - BSI
Learn More€151.00 -
NF E27-852 (03/1982)
Hose clamps (worm drive type) for general purpose use with bands or wires.
3/1/1982 - Paper - French - AFNOR
Learn More€48.00 -
€48.00
-
€48.00
-
BS 4895:1981
Specification for semi-tubular rivets for general purpose use
11/30/1981 - PDF - English - BSI
Learn More€151.00 -
€60.00
-
ASTM F704-81(2022)
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
1/1/1981 - PDF - English - ASTM
Learn More€60.00 -
ASTM F704-81(2022) + Redline
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
1/1/1981 - PDF - English - ASTM
Learn More€72.00 -
€14.00
-
NF E27-355 (10/1980) (R2010)
Fasteners. Equipment for working the soil. Countersunk head nib bolts for fastening thin wear parts.
10/1/1980 - Paper - French - AFNOR
Learn More€34.67 -
€22.99
-
NF R93-183 (05/1980) (R2001)
Mechanical characteristics of steel resistance welding screws, studs and nuts.
5/1/1980 - Paper - French - AFNOR
Learn More€48.00 -
NF F00-006 (03/1980) (R2010)
Railway material in general. Normalized screws with drilled heads. Sizes and locations of drillings.
3/1/1980 - Paper - French - AFNOR
Learn More€25.67 -
€22.99
-
€48.00
-
€48.00
-
UNE 17087:1979
GENERAL PURPOSE BOLTS AND SCREWS - METRIC SERIES - RADII UNDER THE HEAD.
4/15/1979 - PDF - Spanish - AENOR
Learn More€14.00 -
€22.99
-
€22.99
