21.060 : Fasteners
-
BS 4894:1993
Specification for bifurcated rivets for general purpose use (metric series)
5/15/1993 - PDF - English -
Learn More€151.00 -
UNE-EN 28737:1993 (R2008)
TAPER PINS WITH EXTERNAL THREAD, UNHARDENED. (ISO 8737:1986).
5/12/1993 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 28736:1993 (R2008)
TAPER PINS WITH INTERNAL THREAD, UNHARDENED. (ISO 8736:1986).
5/12/1993 - PDF - Spanish -
Learn More€46.00 -
UNE-EN 28737:1993 (R2008)
TAPER PINS WITH EXTERNAL THREAD, UNHARDENED. (ISO 8737:1986).
5/12/1993 - PDF - English -
Learn More€55.20 -
UNE-EN 28736:1993 (R2008)
TAPER PINS WITH INTERNAL THREAD, UNHARDENED. (ISO 8736:1986).
5/12/1993 - PDF - English -
Learn More€55.20 -
€46.00
-
€55.20
-
€55.20
-
€55.20
-
€46.00
-
€46.00
-
NBN EN 2146:1993
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
4/1/1993 - PDF - German -
Learn More€58.00 -
NBN EN 2553:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
4/1/1993 - PDF - English -
Learn More€58.00 -
NBN EN 2146:1993
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
4/1/1993 - PDF - English -
Learn More€58.00 -
NBN EN 2553:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
4/1/1993 - PDF - French -
Learn More€58.00 -
NBN EN 2148:1993
Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
4/1/1993 - PDF - German -
Learn More€37.00 -
NBN EN 2550:1993
Aerospace series - Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series
4/1/1993 - PDF - English -
Learn More€37.00 -
NBN EN 2550:1993
Aerospace series - Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series
4/1/1993 - PDF - French -
Learn More€37.00 -
NBN EN 2143:1993
Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series
4/1/1993 - PDF - French -
Learn More€37.00 -
NBN EN 2552:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
4/1/1993 - PDF - English -
Learn More€37.00 -
NBN EN 2143:1993
Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series
4/1/1993 - PDF - English -
Learn More€37.00 -
NBN EN 2552:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
4/1/1993 - PDF - French -
Learn More€37.00 -
NBN EN 2146:1993
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
4/1/1993 - PDF - French -
Learn More€58.00 -
NBN EN 2555:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
4/1/1993 - PDF - English -
Learn More€37.00 -
NBN EN 2148:1993
Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
4/1/1993 - PDF - English -
Learn More€37.00 -
NBN EN 2555:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
4/1/1993 - PDF - French -
Learn More€37.00 -
NBN EN 2148:1993
Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
4/1/1993 - PDF - French -
Learn More€37.00 -
NBN EN 2143:1993
Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series
4/1/1993 - PDF - German -
Learn More€37.00 -
NBN EN 2551:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
4/1/1993 - PDF - English -
Learn More€37.00 -
NBN EN 2551:1993
Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
4/1/1993 - PDF - French -
Learn More€37.00 -
UNE-EN 27721:1992
COUNTERSUNK HEAD SCREWS. HEAD CONFIGURATION AND GAUGING. (ISO 7721:1983).
12/10/1992 - PDF - Spanish -
Learn More€39.00 -
UNE-EN 27721:1992
COUNTERSUNK HEAD SCREWS. HEAD CONFIGURATION AND GAUGING. (ISO 7721:1983).
12/10/1992 - PDF - English -
Learn More€46.80 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
UNE-EN 26157-3:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 3: BOLTS, SCREWS AND STUDS FOR SPECIAL REQUIREMENTS. (ISO 6157-3:1988)
12/2/1992 - PDF - Spanish -
Learn More€68.00 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
NBN EN 28738:1992
Plain washers for clevis pins - Product grade A (ISO 8738:1986)
12/2/1992 - PDF - English -
Learn More€37.00 -
€37.00
-
UNE-EN 26157-1:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (ISO 6157-1:1988)
12/2/1992 - PDF - Spanish -
Learn More€60.00 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
NBN EN 28738:1992
Plain washers for clevis pins - Product grade A (ISO 8738:1986)
12/2/1992 - PDF - French -
Learn More€37.00 -
€37.00
-
UNE-EN 26157-3:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 3: BOLTS, SCREWS AND STUDS FOR SPECIAL REQUIREMENTS. (ISO 6157-3:1988)
12/2/1992 - PDF - English -
Learn More€81.60 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
€37.00
-
UNE-EN 26157-1:1992
FASTENERS. SURFACE DISCONTINUITIES. PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (ISO 6157-1:1988)
12/2/1992 - PDF - English -
Learn More€72.00 -
€37.00
-
€37.00
-
€37.00
-
€37.00
-
NBN EN 28738:1992
Plain washers for clevis pins - Product grade A (ISO 8738:1986)
12/2/1992 - PDF - German -
Learn More€37.00 -
€37.00
-
€60.50 -
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
€60.50
-
UNE-EN 28839:1992
MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NONFERROUS METALS. (ISO 8839:1986)
11/23/1992 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 28839:1992
MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NONFERROUS METALS. (ISO 8839:1986)
11/23/1992 - PDF - English -
Learn More€62.40 -
€151.00 -
ISO 898-7:1992 (R2020)
Mechanical properties of fasteners
Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
11/12/1992 - Paper - English -
Learn More€48.00 -
ISO 898-7:1992 (R2020)
Mechanical properties of fasteners
Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
11/12/1992 - Paper - French -
Learn More€48.00 -
UNE-EN 20273:1992
FASTENERS. CLEARANCE HOLES FOR BOLTS AND SCREWS. (ISO 273:1979).
11/10/1992 - PDF - English -
Learn More€30.00 -
UNE-EN 20273:1992
FASTENERS. CLEARANCE HOLES FOR BOLTS AND SCREWS. (ISO 273:1979).
11/10/1992 - PDF - Spanish -
Learn More€25.00 -
€151.00 -
€151.00 -
€151.00 -
€151.00 -
€151.00 -
€151.00 -
€151.00 -
€151.00 -
€151.00 -
DIN EN 28749:1992-10
Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
10/1/1992 - PDF - German -
Learn More€32.34 -
DIN EN 22341:1992-10
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
10/1/1992 - PDF - German -
Learn More€45.98 -
DIN EN 27435:1992-10
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
10/1/1992 - PDF - English -
Learn More€49.16 -
DIN EN 28737:1992-10
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992
10/1/1992 - PDF - German -
Learn More€39.35 -
DIN EN 22340:1992-10
Clevis pins without head (ISO 2340:1986); german version EN 22340:1992
10/1/1992 - PDF - German -
Learn More€45.98 -
DIN EN 27434:1992-10
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
10/1/1992 - PDF - English -
Learn More€49.16 -
DIN EN 28738:1992-10
Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992
10/1/1992 - PDF - English -
Learn More€49.16 -
DIN EN 28736:1992-10
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992
10/1/1992 - PDF - German -
Learn More€45.98 -
DIN EN 28749:1992-10
Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992
10/1/1992 - PDF - English -
Learn More€40.56 -
DIN EN 22341:1992-10
Clevis pins with head (ISO 2341:1986); german version EN 22341:1992
10/1/1992 - PDF - English -
Learn More€57.57 -
DIN EN 27436:1992-10
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
10/1/1992 - PDF - German -
Learn More€39.35 -
DIN EN 22339:1992-10
Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992
10/1/1992 - PDF - German -
Learn More€45.98 -
DIN EN 28737:1992-10
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992
10/1/1992 - PDF - English -
Learn More€49.16 -
DIN EN 22340:1992-10
Clevis pins without head (ISO 2340:1986); german version EN 22340:1992
10/1/1992 - PDF - English -
Learn More€57.57 -
DIN EN 27435:1992-10
Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
10/1/1992 - PDF - German -
Learn More€39.35 -
DIN EN 28736:1992-10
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992
10/1/1992 - PDF - English -
Learn More€57.57 -
DIN EN 27434:1992-10
Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
10/1/1992 - PDF - German -
Learn More€39.35 -
DIN EN 27436:1992-10
Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
10/1/1992 - PDF - English -
Learn More€49.16 -
DIN EN 28738:1992-10
Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992
10/1/1992 - PDF - German -
Learn More€39.35 -
DIN EN 22339:1992-10
Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992
10/1/1992 - PDF - English -
Learn More€57.57 -
NF EN 26157-1, E25-100-3 (06/1992) (R2002)
Fasteners. Surface discontinuities. Part 1 : bolts, screws and studs for general requirements. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€86.50 -
NF EN 28839, E25-011 (06/1992) (R2002)
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals. - Caractéristiques mécaniques des éléments de fixation
6/1/1992 - Paper - French -
Learn More€60.50 -
NF EN 26157-3, E25-100-4 (06/1992) (R2002)
Fasteners. Surface discontinuties. Part 3 : bolts, screw and studs for special requirements. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€75.50 -
NF EN 20273, E25-023 (06/1992) (R2002)
Fasteners. Clearance hole for bolts and screws. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€60.50 -
NF EN 27721, E25-018 (06/1992)
Fasteners. Countersunk head screws. Head configuration and gauging. - Éléments de fixation
6/1/1992 - Paper - French -
Learn More€75.50 -
€151.00 -
BS EN 26157-1:1992
Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
5/1/1992 - PDF - English -
Learn More€180.00 -
€97.01
-
BS EN 26157-3:1992
Fasteners. Surface discontinuities. Bolts, screws and studs for special requirements
4/1/1992 - PDF - English -
Learn More€180.00 -
€151.00 -
BS EN 28839:1992
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
4/1/1992 - PDF - English -
Learn More€151.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - German -
Learn More€37.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - German -
Learn More€58.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - English -
Learn More€89.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - French -
Learn More€89.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - German -
Learn More€58.00 -
NBN EN 20273:1992
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
2/29/1992 - PDF - English -
Learn More€37.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - English -
Learn More€37.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - English -
Learn More€58.00 -
NBN EN 20273:1992
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
2/29/1992 - PDF - French -
Learn More€37.00 -
NBN EN 27721:1992
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
2/29/1992 - PDF - French -
Learn More€37.00 -
NBN EN 26157-1:1992
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
2/29/1992 - PDF - French -
Learn More€58.00 -
NBN EN 26157-3:1992
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
2/29/1992 - PDF - German -
Learn More€89.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - English -
Learn More€58.00 -
NBN EN 28839:1992
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
2/29/1992 - PDF - French -
Learn More€58.00 -
NBN EN 20273:1992
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)
2/29/1992 - PDF - German -
Learn More€37.00 -
DIN EN 20273:1992-02
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
2/1/1992 - PDF - German -
Learn More€32.34 -
DIN EN 27721:1992-02
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
2/1/1992 - PDF - German -
Learn More€39.35 -
DIN EN 20273:1992-02
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
2/1/1992 - PDF - English -
Learn More€40.56 -
DIN EN 27721:1992-02
Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
2/1/1992 - PDF - English -
Learn More€49.16 -
DIN EN 28839:1991-12
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
12/1/1991 - PDF - English -
Learn More€57.57 -
DIN EN 26157-3:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
12/1/1991 - PDF - English -
Learn More€91.12 -
DIN EN 26157-1:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
12/1/1991 - PDF - English -
Learn More€74.58 -
DIN EN 28839:1991-12
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
12/1/1991 - PDF - German -
Learn More€45.98 -
DIN EN 26157-3:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
12/1/1991 - PDF - German -
Learn More€72.80 -
DIN EN 26157-1:1991-12
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
12/1/1991 - PDF - German -
Learn More€59.63 -
BS 1981:1991
Specification for unified machine screws and machine screw nuts
8/30/1991 - PDF - English -
Learn More€331.00 -
DIN 20594:1991-08
Suspension claws for mining, for loads up to 30 kN, requirements and testing
8/1/1991 - PDF - German -
Learn More€32.34 -
BS 4377:1991
Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
5/31/1991 - PDF - English -
Learn More€180.00 -
DIN 974-2:1991-05
Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
5/1/1991 - PDF - German -
Learn More€32.34 -
DIN 974-2:1991-05
Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
5/1/1991 - PDF - English -
Learn More€40.56 -
BS 7364:1990
Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
9/30/1990 - PDF - English -
Learn More€151.00 -
UNE 68011:1990
AGRICULTURAL MACHINERY. STRING COTTERS OF A BOLT. SPECIFICATIONS.
9/18/1990 - PDF - Spanish -
Learn More€14.00 -
ISO 7721-2:1990 (R2019)
Countersunk flat head screws
Part 2: Penetration depth of cross recesses
8/23/1990 - Paper - English -
Learn More€48.00 -
ISO 7721-2:1990 (R2019)
Countersunk flat head screws
Part 2: Penetration depth of cross recesses
8/23/1990 - Paper - French -
Learn More€48.00 -
€32.34
-
€40.56
-
DIN 6918:1990-04
Square taper washers for high-strength structual bolting of steel channel sections
4/1/1990 - PDF - German -
Learn More€32.34 -
DIN 6918:1990-04
Square taper washers for high-strength structual bolting of steel channel sections
4/1/1990 - PDF - English -
Learn More€40.56 -
€49.16
-
€39.35
-
€32.34
-
DIN 6917:1989-10
Square taper washers for high-strength structural bolting of steel I sections
10/1/1989 - PDF - German -
Learn More€32.34 -
DIN 6917:1989-10
Square taper washers for high-strength structural bolting of steel I sections
10/1/1989 - PDF - English -
Learn More€40.56 -
NF E27-853 (09/1989)
Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications. - Colliers de serrage métalliques à usage général
9/1/1989 - Paper - French -
Learn More€75.67 -
€45.98
-
€45.98
-
€39.35
-
UNE 68012:1989
AGRICULTURAL WHEELED TRACTORS. THREE-POINT-LINKAGE. LINCH PINS. DIMENSIONS.
3/21/1989 - PDF - Spanish -
Learn More€17.00 -
NF E27-855 (09/1988)
General purpose metallic hose clamps. Worm drive type. Specifications. - Colliers de serrage métalliques à usage général
9/1/1988 - Paper - French -
Learn More€60.67 -
NF E27-851 (09/1988)
General purpose metallic hose clamps. Perforated strip screw type. Specifications. - Colliers de serrage métalliques à usage général
9/1/1988 - Paper - French -
Learn More€60.67 -
DIN 42013:1988-08
Spring washers for axial adjustment of ball bearings of small motors
8/1/1988 - PDF - German -
Learn More€32.34 -
€72.00
-
€72.00
-
€110.00
-
€110.00
-
ISO 8678:1988 (R2020)
Cup head square neck bolts with small head and short neck
Product grade B
6/16/1988 - Paper - English -
Learn More€48.00 -
ISO 8678:1988 (R2020)
Cup head square neck bolts with small head and short neck
Product grade B
6/16/1988 - Paper - French -
Learn More€48.00 -
UNE 28640:1988
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
4/8/1988 - PDF - English -
Learn More€55.20 -
UNE 28640:1988
AEROSPACE SERIES. REPRESENTATION OF RIVETS ON DRAWINGS FOR AEROSPACE EQUIPMENT.
4/8/1988 - PDF - Spanish -
Learn More€46.00 -
DIN 1596:1988-02
Light pipe clips with pipe-tightening; single-ended for rail vehicles
2/1/1988 - PDF - German -
Learn More€32.34 -
DIN 1592:1988-02
Heavy pipe clips with pipe-tightening; single-ended for rail vehicles
2/1/1988 - PDF - German -
Learn More€32.34 -
DIN 1597:1988-02
Light pipe clips with pipe-tightening; double-ended for rail vehicles
2/1/1988 - PDF - German -
Learn More€32.34 -
DIN 1593:1988-02
Heavy pipe clips with pipe-tightening; double-ended for rail vehicles
2/1/1988 - PDF - German -
Learn More€32.34 -
BS 4185-14:1987
Machine tool components Method for determination of the pilot diameter 60° centre holes
12/31/1987 - PDF - English -
Learn More€180.00 -
€37.00
-
€37.00
-
€58.00
-
€58.00
-
€49.16
-
€39.35
-
ASME B18.18.1M-1987 (R1999) (R2006)
Inspection and Quality Assurance for General Purpose Fasteners
1/1/1987 - PDF DRM - English -
Learn More€37.00 -
€48.00
-
€48.00
-
€48.00
-
ISO 8736:1986 (R2022)
Taper pins with internal thread, unhardened
General information
11/6/1986 - Paper - French -
Learn More€48.00 -
€48.00
-
ISO 8736:1986 (R2022)
Taper pins with internal thread, unhardened
General information
11/6/1986 - Paper - English -
Learn More€48.00 -
ISO 8737:1986 (R2022)
Taper pins with external thread, unhardened
General information
11/6/1986 - Paper - French -
Learn More€48.00 -
€48.00
-
ISO 8737:1986 (R2022)
Taper pins with external thread, unhardened
General information
11/6/1986 - Paper - English -
Learn More€48.00 -
€48.00
