21.040.30 : Special screw threads
-
DIN EN ISO 11363-1:2023-11
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018 + Amd 1:2023), German version EN ISO 11363-1:2018 + A1:2023
11/1/2023 - PDF - German - DIN
Learn More€72.80 -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 1179-2:2023
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
10/31/2023 - PDF - English - AENOR
Learn More€75.60 -
BS EN ISO 11363-1:2018+A1:2023
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
8/23/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 15245-1:2021 + Redline
Tracked Changes. Gas cylinders. Parallel threads for connection of valves to gas cylinders Specification
12/2/2021 - PDF - English - BSI
Learn More€235.00 -
DIN EN ISO 15245-1:2021-09
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021), German version EN ISO 15245-1:2021
9/1/2021 - PDF - German - DIN
Learn More€72.80 -
BS EN ISO 15245-1:2021
Gas cylinders. Parallel threads for connection of valves to gas cylinders Specification
6/21/2021 - PDF - English - BSI
Learn More€180.00 -
€45.98
-
€52.90
-
DIN 513-3:2020-12
Metric buttress threads - Part 3: Deviations and tolerances
12/1/2020 - PDF - German - DIN
Learn More€79.72 -
BS EN ISO 11363-2:2017 + Redline
Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
€250.00
-
UNE-EN ISO 11363-1:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
5/3/2018 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 11363-1:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
5/3/2018 - PDF - English - AENOR
Learn More€72.00 -
DIN EN ISO 11363-2:2018-03
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
3/1/2018 - PDF - English - DIN
Learn More€107.48 -
DIN EN ISO 11363-2:2018-03
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017), German version EN ISO 11363-2:2017
3/1/2018 - PDF - German - DIN
Learn More€85.79 -
UNE-EN ISO 11363-2:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
2/21/2018 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 11363-2:2018
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
2/21/2018 - PDF - English - AENOR
Learn More€84.00 -
NF EN ISO 11363-1, E29-674-1 (02/2018)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1 : specifications
2/1/2018 - Paper - French - AFNOR
Learn More€58.62 -
BS EN ISO 11363-2:2017
Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
1/17/2018 - PDF - English - BSI
Learn More€250.00 -
NF EN ISO 11363-2, E29-674-2 (12/2017)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2 : inspection gauges
12/1/2017 - Paper - French - AFNOR
Learn More€73.23 -
€36.27
-
DIN 3852-21:2016-09
Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
9/1/2016 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 6696:2016-07
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
7/1/2016 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 8488:2016-07
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
7/1/2016 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 6696:2016-07
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
7/1/2016 - PDF - English - DIN
Learn More€74.58 -
DIN ISO 8488:2016-07
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
7/1/2016 - PDF - English - DIN
Learn More€74.58 -
BS EN 10226-2:2005
Pipe threads where pressure tight joints are made on the Taper external and taper internal threads. Dimensions, tolerances designation
4/30/2016 - PDF - English - BSI
Learn More€180.00 -
BS EN 10226-3:2005
Pipes threads where pressure-tight joints are made on the Verification by means of limit gauges
4/30/2016 - PDF - English - BSI
Learn More€293.00 -
DIN 7500-2:2016-04
Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
4/1/2016 - PDF - German - DIN
Learn More€32.34 -
DIN 7500-2:2016-04
Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
4/1/2016 - PDF - English - DIN
Learn More€40.56 -
€25.00
-
UNE-EN ISO 1179-1:2014
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
1/22/2014 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 1179-1:2014
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
1/22/2014 - PDF - English - AENOR
Learn More€68.40 -
€62.00
-
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
4/1/2011 - PDF - German - DIN
Learn More€32.34 -
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
4/1/2011 - PDF - English - DIN
Learn More€40.56 -
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
4/1/2011 - PDF - German - DIN
Learn More€32.34 -
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
4/1/2011 - PDF - English - DIN
Learn More€40.56 -
€55.77
-
BS EN 10226-1:2004
Pipe threads where pressure tight joints are made on the Taper external and parallel internal threads. Dimensions, tolerances designation
10/31/2010 - PDF - English - BSI
Learn More€180.00 -
BS 919-1:2007
Screw gauge limits and tolerances Specification for gauges screw threads of unified form
9/30/2009 - PDF - English - BSI
Learn More€348.00 -
€75.50
-
UNE-EN ISO 1179-3:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
5/13/2009 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 1179-3:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
5/13/2009 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 1179-4:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
5/13/2009 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 1179-4:2009
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
5/13/2009 - PDF - English - AENOR
Learn More€68.40 -
€110.00
-
€110.00
-
€250.00
-
UNE-EN 60423:2008
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
4/23/2008 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60423:2008
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
4/23/2008 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 10226-3:2005 (R2014)
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
12/21/2005 - PDF - Spanish - AENOR
Learn More€79.00 -
UNE-EN 10226-3:2005 (R2014)
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
12/21/2005 - PDF - English - AENOR
Learn More€94.80 -
NF EN 10226-2, E03-004-2 (12/2005)
Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation
12/1/2005 - Paper - French - AFNOR
Learn More€75.50 -
UNE-EN 10226-2:2005 (R2019)
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
11/16/2005 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 10226-2:2005 (R2019)
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
11/16/2005 - PDF - English - AENOR
Learn More€72.00 -
DIN EN 10226-2:2005-11
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
11/1/2005 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10226-2:2005-11
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
11/1/2005 - PDF - English - DIN
Learn More€82.52 -
NBN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
9/30/2005 - PDF - French - NBN
Learn More€89.00 -
NBN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
9/30/2005 - PDF - German - NBN
Learn More€89.00 -
NBN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
9/30/2005 - PDF - English - NBN
Learn More€89.00 -
DIN 3858:2005-08
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
8/1/2005 - PDF - German - DIN
Learn More€52.90 -
DIN 3858:2005-08
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
8/1/2005 - PDF - English - DIN
Learn More€66.07 -
NF EN 10226-3, E03-004-3 (07/2005)
Pipe threads where pressure tight joints are made on the threads - Part 3 : verification by means of limit gauges
7/1/2005 - Paper - French - AFNOR
Learn More€108.33 -
DIN EN 10226-3:2005-05
Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
5/1/2005 - PDF - German - DIN
Learn More€104.95 -
DIN EN 10226-3:2005-05
Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
5/1/2005 - PDF - English - DIN
Learn More€131.40 -
NBN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
4/1/2005 - PDF - French - NBN
Learn More€142.00 -
NBN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
4/1/2005 - PDF - German - NBN
Learn More€142.00 -
NBN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
4/1/2005 - PDF - English - NBN
Learn More€142.00 -
UNE-EN 10226-1:2004 (R2019)
Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
12/17/2004 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 10226-1:2004 (R2019)
Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
12/17/2004 - PDF - English - AENOR
Learn More€72.00 -
€39.35
-
NF EN 10226-1, E03-004-1 (11/2004)
Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation
11/1/2004 - Paper - French - AFNOR
Learn More€60.50 -
DIN EN 10226-1:2004-10
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
10/1/2004 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10226-1:2004-10
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
10/1/2004 - PDF - English - DIN
Learn More€82.52 -
NBN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
8/31/2004 - PDF - French - NBN
Learn More€58.00 -
NBN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
8/31/2004 - PDF - German - NBN
Learn More€58.00 -
NBN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
8/31/2004 - PDF - English - NBN
Learn More€58.00 -
NF EN ISO 228-2, E03-005-2 (11/2003)
Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges
11/1/2003 - Paper - French - AFNOR
Learn More€86.50 -
UNE-EN ISO 228-1:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
9/26/2003 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 228-1:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
9/26/2003 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN ISO 228-2:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
9/26/2003 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 228-2:2003 (R2010)
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
9/26/2003 - PDF - English - AENOR
Learn More€81.60 -
DIN 263-3:2003-06
Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
6/1/2003 - PDF - German - DIN
Learn More€39.35 -
NF EN ISO 228-1, E03-005-1 (06/2003)
Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation
6/1/2003 - Paper - French - AFNOR
Learn More€75.50 -
DIN EN ISO 228-1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
5/1/2003 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 228-1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
5/1/2003 - PDF - English - DIN
Learn More€74.58 -
DIN EN ISO 228-2:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
5/1/2003 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 228-2:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
5/1/2003 - PDF - English - DIN
Learn More€99.44 -
NBN EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
3/31/2003 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
3/31/2003 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
3/31/2003 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
3/31/2003 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
3/31/2003 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
3/31/2003 - PDF - English - NBN
Learn More€89.00 -
JIS B 1060:2003 (R2013)
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
3/20/2003 - PDF - Japanese - JSA
Learn More€32.50 -
BS EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the Verification by means of limit gauges
2/26/2003 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the Dimensions, tolerances and designation
2/26/2003 - PDF - English - BSI
Learn More€180.00 -
DIN EN ISO 15245-2:2002-04
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
4/1/2002 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 15245-2:2002-04
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
4/1/2002 - PDF - English - DIN
Learn More€66.07 -
BS EN ISO 15245-2:2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders Gauge inspection
3/11/2002 - PDF - English - BSI
Learn More€180.00 -
JIS B 1059:2001 (R2016)
Drilling screws with tapping screw thread - Mechanical and functional properties
12/20/2001 - PDF - Japanese - JSA
Learn More€32.50 -
ISO 7-2:2000 (R2022)
Pipe threads where pressure-tight joints are made on the threads
Part 2: Verification by means of limit gauges
9/21/2000 - Paper - French - ISO
Learn More€174.00 -
ISO 228-1:2000 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 1: Dimensions, tolerances and designation
9/21/2000 - Paper - French - ISO
Learn More€72.00 -
ISO 228-1:2000 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 1: Dimensions, tolerances and designation
9/21/2000 - Paper - English - ISO
Learn More€72.00 -
ISO 7-2:2000 (R2022)
Pipe threads where pressure-tight joints are made on the threads
Part 2: Verification by means of limit gauges
9/21/2000 - Paper - English - ISO
Learn More€174.00 -
€34.00
-
€40.80
-
DIN 263-1:2000-03
Single- and double-start acme thread with clearance for rail vehicles - Part 1: Dimensions
3/1/2000 - PDF - German - DIN
Learn More€32.34 -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999), German version EN ISO 10666:1999
2/1/2000 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999), English version DIN EN ISO 10666
2/1/2000 - PDF - English - DIN
Learn More€66.07 -
€37.00
-
€37.00
-
€37.00
-
€151.00
-
DIN EN ISO 1478:1999-12
Tapping screw thread (ISO 1478:1999), German version EN ISO 1478:1999
12/1/1999 - PDF - German - DIN
Learn More€39.35 -
€49.16
-
€48.00
-
€48.00
-
€32.50
-
€32.50
-
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers; thread sizes
4/1/1998 - PDF - German - DIN
Learn More€39.35 -
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers; thread sizes
4/1/1998 - PDF - English - DIN
Learn More€49.16 -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
11/1/1997 - PDF - German - DIN
Learn More€45.98 -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
11/1/1997 - PDF - English - DIN
Learn More€57.57 -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
11/1/1997 - PDF - German - DIN
Learn More€45.98 -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
11/1/1997 - PDF - English - DIN
Learn More€57.57 -
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
11/1/1997 - PDF - German - DIN
Learn More€65.89 -
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
11/1/1997 - PDF - English - DIN
Learn More€82.52 -
€99.00
-
€32.50
-
ISO 7-1:1994 (R2020)
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
5/12/1994 - Paper - French - ISO
Learn More€72.00 -
ISO 7-1:1994 (R2020)
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
5/12/1994 - Paper - English - ISO
Learn More€72.00 -
DIN 6341-2:1993-10
Draw-in collets; thread of the collets; nominal size, limit deviations
10/1/1993 - PDF - German - DIN
Learn More€45.98 -
NF F00-016 (06/1992)
General railway equipment. Round screw threads. Sizes and tolerances. - Matériel ferroviaire en général
6/1/1992 - Paper - French - AFNOR
Learn More€48.00 -
NF F00-017 (06/1992) (R2012)
General railway equipment. Round screw threads. Verification. - Matériel ferroviaire en général
6/1/1992 - Paper - French - AFNOR
Learn More€75.67 -
NF F00-032 (06/1992) (R2012)
General railway equipment. Round screw threads. Profile. - Matériel ferroviaire en général
6/1/1992 - Paper - French - AFNOR
Learn More€34.67 -
DIN 2781:1990-09
Machine tools; buttress thread 45°, single start, for hydraulic presses
9/1/1990 - PDF - German - DIN
Learn More€32.34 -
DIN 20314:1990-06
Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
6/1/1990 - PDF - German - DIN
Learn More€32.34 -
€25.00
-
DIN 55525:1988-11
Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
11/1/1988 - PDF - German - DIN
Learn More€39.35 -
€77.00
-
€35.00
-
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
8/20/1987 - Paper - French - ISO
Learn More€110.00 -
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
8/20/1987 - Paper - English - ISO
Learn More€110.00 -
UNE 68054:1986 (R2021)
EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTION THREADING
11/15/1986 - PDF - Spanish - AENOR
Learn More€14.00 -
€25.00
-
BS 4185-10:1977
Machine tool components Trapezoidal threads for lead and feed screw assemblies
3/31/1977 - PDF - English - BSI
Learn More€151.00 -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - German - DIN
Learn More€32.34 -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - English - DIN
Learn More€40.56 -
DIN 5606-2:1975-03
Gauging of threads on workpieces for railway vehicles, round thread, acme thread, rounded acme thread
3/1/1975 - PDF - German - DIN
Learn More€22.99 -
€22.99
-
€28.60
-
€22.99
-
€28.60
-
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
€42.00
-
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - German - DIN
Learn More€22.99 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - English - DIN
Learn More€28.60 -
€22.99
-
€28.60
-
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - German - DIN
Learn More€22.99 -
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - English - DIN
Learn More€28.60 -
€22.99
-
€28.60
-
NF L40-102 (05/1966) (R2011)
Aircraft fluid installations. Connectors, axial sealing, male thread fittings. Sim thread (rech.)
5/1/1966 - Paper - French - AFNOR
Learn More€25.67 -
€25.67
-
NF L05-210 (10/1956) (R2011)
Screw thread tolerances. Selection for aircraft industry (rech.).
10/1/1956 - Paper - French - AFNOR
Learn More€25.50 -
€25.50
-
€25.50
-
NF L05-110 (03/1953) (R2008)
Screw threads. Selection for aircraft industry (rech.).
3/1/1953 - Paper - French - AFNOR
Learn More€25.50 -
€25.50
-
BS 811:1950
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
5/24/1950 - PDF - English - BSI
Learn More€250.00