21.040.30 : Special screw threads
-
DIN EN ISO 11363-1:2023-11
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018 + Amd 1:2023), German version EN ISO 11363-1:2018 + A1:2023
11/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 15245-1:2021-09
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021), German version EN ISO 15245-1:2021
9/1/2021 - PDF - German - DIN
Learn More€72.80 -
€45.98
-
€52.90
-
DIN 513-3:2020-12
Metric buttress threads - Part 3: Deviations and tolerances
12/1/2020 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 11363-2:2018-03
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
3/1/2018 - PDF - English - DIN
Learn More€107.48 -
DIN EN ISO 11363-2:2018-03
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017), German version EN ISO 11363-2:2017
3/1/2018 - PDF - German - DIN
Learn More€85.79 -
DIN 3852-21:2016-09
Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
9/1/2016 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 6696:2016-07
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
7/1/2016 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 8488:2016-07
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
7/1/2016 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 6696:2016-07
Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
7/1/2016 - PDF - English - DIN
Learn More€74.58 -
DIN ISO 8488:2016-07
Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
7/1/2016 - PDF - English - DIN
Learn More€74.58 -
DIN 7500-2:2016-04
Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
4/1/2016 - PDF - German - DIN
Learn More€32.34 -
DIN 7500-2:2016-04
Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
4/1/2016 - PDF - English - DIN
Learn More€40.56 -
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
4/1/2011 - PDF - German - DIN
Learn More€32.34 -
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
4/1/2011 - PDF - English - DIN
Learn More€40.56 -
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
4/1/2011 - PDF - German - DIN
Learn More€32.34 -
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
4/1/2011 - PDF - English - DIN
Learn More€40.56 -
DIN EN 10226-3 Berichtigung 1:2006-10
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges, German version EN 10226-3:2005, Corrigenda to DIN EN 10226-3:2005-05
10/1/2006 - PDF - German - DIN
Learn More€0.00 -
DIN EN 10226-2:2005-11
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
11/1/2005 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10226-2:2005-11
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
11/1/2005 - PDF - English - DIN
Learn More€82.52 -
DIN 3858:2005-08
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
8/1/2005 - PDF - German - DIN
Learn More€52.90 -
DIN 3858:2005-08
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
8/1/2005 - PDF - English - DIN
Learn More€66.07 -
DIN EN 10226-3:2005-05
Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
5/1/2005 - PDF - German - DIN
Learn More€104.95 -
DIN EN 10226-3:2005-05
Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
5/1/2005 - PDF - English - DIN
Learn More€131.40 -
€39.35
-
DIN EN 10226-1:2004-10
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
10/1/2004 - PDF - German - DIN
Learn More€65.89 -
DIN EN 10226-1:2004-10
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
10/1/2004 - PDF - English - DIN
Learn More€82.52 -
DIN 263-3:2003-06
Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
6/1/2003 - PDF - German - DIN
Learn More€39.35 -
DIN EN ISO 228-1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
5/1/2003 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 228-1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
5/1/2003 - PDF - English - DIN
Learn More€74.58 -
DIN EN ISO 228-2:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
5/1/2003 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 228-2:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
5/1/2003 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 228-1 Beiblatt 1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
5/1/2003 - PDF - German - DIN
Learn More€32.34 -
DIN EN ISO 228-1 Beiblatt 1:2003-05
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
5/1/2003 - PDF - English - DIN
Learn More€40.56 -
DIN EN ISO 15245-2:2002-04
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
4/1/2002 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 15245-2:2002-04
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
4/1/2002 - PDF - English - DIN
Learn More€66.07 -
DIN 263-1:2000-03
Single- and double-start acme thread with clearance for rail vehicles - Part 1: Dimensions
3/1/2000 - PDF - German - DIN
Learn More€32.34 -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999), German version EN ISO 10666:1999
2/1/2000 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 10666:2000-02
Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999), English version DIN EN ISO 10666
2/1/2000 - PDF - English - DIN
Learn More€66.07 -
DIN EN ISO 1478:1999-12
Tapping screw thread (ISO 1478:1999), German version EN ISO 1478:1999
12/1/1999 - PDF - German - DIN
Learn More€39.35 -
€49.16
-
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers; thread sizes
4/1/1998 - PDF - German - DIN
Learn More€39.35 -
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers; thread sizes
4/1/1998 - PDF - English - DIN
Learn More€49.16 -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
11/1/1997 - PDF - German - DIN
Learn More€45.98 -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
11/1/1997 - PDF - English - DIN
Learn More€57.57 -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
11/1/1997 - PDF - German - DIN
Learn More€45.98 -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
11/1/1997 - PDF - English - DIN
Learn More€57.57 -
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
11/1/1997 - PDF - German - DIN
Learn More€65.89 -
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
11/1/1997 - PDF - English - DIN
Learn More€82.52 -
DIN 6341-2:1993-10
Draw-in collets; thread of the collets; nominal size, limit deviations
10/1/1993 - PDF - German - DIN
Learn More€45.98 -
DIN 2781:1990-09
Machine tools; buttress thread 45°, single start, for hydraulic presses
9/1/1990 - PDF - German - DIN
Learn More€32.34 -
DIN 20314:1990-06
Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
6/1/1990 - PDF - German - DIN
Learn More€32.34 -
DIN 55525:1988-11
Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
11/1/1988 - PDF - German - DIN
Learn More€39.35 -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - German - DIN
Learn More€32.34 -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - English - DIN
Learn More€40.56 -
DIN 5606-2:1975-03
Gauging of threads on workpieces for railway vehicles, round thread, acme thread, rounded acme thread
3/1/1975 - PDF - German - DIN
Learn More€22.99 -
€22.99
-
€28.60
-
€22.99
-
€28.60
-
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - German - DIN
Learn More€22.99 -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - English - DIN
Learn More€28.60 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - German - DIN
Learn More€22.99 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - English - DIN
Learn More€28.60 -
€22.99
-
€28.60
-
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - German - DIN
Learn More€22.99 -
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - English - DIN
Learn More€28.60 -
€22.99
-
€28.60