21.040.30 : Special screw threads

167 Item(s)

Set Ascending Direction
per page

List  Grid 

  • 20/30414262 DC:2020

    BS EN ISO 15245-1. Gas cylinders. Parallel threads for connection of valves to gas cylinders Part 1. Specification
    6/4/2020 - PDF - English - BSI
    Learn More
    €23.70

  • NF ISO 1501/A1, E03-500/A1 (05/2020)


    5/1/2020 - Paper - French - AFNOR
    Learn More
    €23.05

  • BS EN ISO 11363-2:2017 + Redline

    Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11363-1:2018 + Redline

    Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS ISO 1501:2009+A1:2020

    ISO miniature screw threads
    2/10/2020 - PDF - English - BSI
    Learn More
    €215.67

  • PR NF EN ISO 2702, E25-650-1PR (05/2019)

    Fixations - Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques et physiques
    5/1/2019 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • UNE-EN ISO 11363-1:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
    5/3/2018 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN ISO 11363-1:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
    5/3/2018 - PDF - English - AENOR
    Learn More
    €62.00

  • DIN EN ISO 11363-1:2018-05

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018), German version EN ISO 11363-1:2018
    5/1/2018 - - - DIN
    Learn More
    From: €68.30

  • BS EN ISO 11363-1:2018

    Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
    3/6/2018 - PDF - English - BSI
    Learn More
    €154.05

  • DIN EN ISO 11363-2:2018-03

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017), German version EN ISO 11363-2:2017
    3/1/2018 - - - DIN
    Learn More
    From: €89.00

  • UNE-EN ISO 11363-2:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
    2/21/2018 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 11363-2:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
    2/21/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • NF EN ISO 11363-1, E29-674-1 (02/2018)

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1 : specifications - Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : Spécifications
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS EN ISO 11363-2:2017

    Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
    1/17/2018 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN ISO 11363-2, E29-674-2 (12/2017)

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2 : inspection gauges - Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 2 : Calibres de contrôle
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €64.01

  • JIS B 0201:2017

    Miniature screw threads
    3/21/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • DIN 3852-21:2016-09

    Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
    9/1/2016 - PDF - German - DIN
    Learn More
    €61.70

  • DIN ISO 6696:2016-07

    Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
    7/1/2016 - - - DIN
    Learn More
    From: €61.70

  • DIN ISO 8488:2016-07

    Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
    7/1/2016 - - - DIN
    Learn More
    From: €61.70

  • BS EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the Taper external and taper internal threads. Dimensions, tolerances designation
    4/30/2016 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 10226-3:2005

    Pipes threads where pressure-tight joints are made on the Verification by means of limit gauges
    4/30/2016 - PDF - English - BSI
    Learn More
    €253.59

  • DIN 7500-2:2016-04

    Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
    4/1/2016 - - - DIN
    Learn More
    From: €33.60

  • JIS B 1007:2015

    Tapping screws thread
    12/21/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • AS/NZS 4411:2015

    Tapping screws thread
    1/1/2015 - PDF sécurisé - English - SA
    Learn More
    €44.88

  • UNE-EN ISO 1179-1:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
    1/22/2014 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 1179-1:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
    1/22/2014 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 1179-2:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
    1/22/2014 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN ISO 1179-2:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
    1/22/2014 - PDF - English - AENOR
    Learn More
    €62.00

  • DIN EN ISO 15245-1:2013-11

    Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013), German version EN ISO 15245-1:2001 + A1:2013
    11/1/2013 - - - DIN
    Learn More
    From: €68.30

  • BS EN ISO 15245-1:2001+A1:2013

    Gas cylinders. Parallel threads for connection of valves to gas cylinders Specification
    8/31/2013 - PDF - English - BSI
    Learn More
    €154.05

  • NF EN ISO 2702, E25-650-1 (07/2011)

    Heat-treated steel tapping screws - Mechanical properties - Vis à tôle en acier traité thermiquement
    7/1/2011 - Paper - French - AFNOR
    Learn More
    €40.69

  • DIN 6063-1:2011-04

    Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
    4/1/2011 - - - DIN
    Learn More
    From: €33.60

  • DIN 6063-2:2011-04

    Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
    4/1/2011 - - - DIN
    Learn More
    From: €33.60

  • JIS B 0254:2011 (R2015)

    Limit Gauges for Parallel Pipe Threads
    3/22/2011 - PDF - Japanese - JSA
    Learn More
    €55.77

  • JIS B 0254:2011

    Limit Gauges for Parallel Pipe Threads
    1/1/2011 - PDF - English - JSA
    Learn More
    €108.46

  • BS EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the Taper external and parallel internal threads. Dimensions, tolerances designation
    10/31/2010 - PDF - English - BSI
    Learn More
    €154.05

  • BS 919-1:2007

    Screw gauge limits and tolerances Specification for gauges screw threads of unified form
    9/30/2009 - PDF - English - BSI
    Learn More
    €300.99

  • NF ISO 1501, E03-500 (07/2009)

    ISO miniature screw threads
    7/1/2009 - Paper - French - AFNOR
    Learn More
    €64.01

  • UNE-EN ISO 1179-3:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
    5/13/2009 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 1179-3:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
    5/13/2009 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN ISO 1179-4:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
    5/13/2009 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 1179-4:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
    5/13/2009 - PDF - English - AENOR
    Learn More
    €58.00

  • ISO 1501:2009

    ISO miniature screw threads
    5/1/2009 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 1501:2009

    ISO miniature screw threads
    5/1/2009 - Paper - French - ISO
    Learn More
    €92.00

  • BS 93:2008

    British Association (B.A.) screw threads. Requirements
    9/30/2008 - PDF - English - BSI
    Learn More
    €215.67

  • UNE-EN 60423:2008

    Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
    4/23/2008 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 60423:2008

    Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
    4/23/2008 - PDF - English - AENOR
    Learn More
    €62.00

  • AS ISO 7.1:2008

    Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation
    1/1/2008 - PDF sécurisé - English - SA
    Learn More
    €78.34

  • UNE-EN 10226-3:2005 (R2014)

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    12/21/2005 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • UNE-EN 10226-3:2005 (R2014)

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    12/21/2005 - PDF - English - AENOR
    Learn More
    €75.00

  • NF EN 10226-2, E03-004-2 (12/2005)

    Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation
    12/1/2005 - Paper - French - AFNOR
    Learn More
    €64.01

  • UNE-EN 10226-2:2005 (R2019)

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    11/16/2005 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 10226-2:2005 (R2019)

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    11/16/2005 - PDF - English - AENOR
    Learn More
    €61.00

  • DIN EN 10226-2:2005-11

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation, German version EN 10226-2:2005
    11/1/2005 - - - DIN
    Learn More
    From: €68.30

  • NBN EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    9/30/2005 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    9/30/2005 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    9/30/2005 - PDF - French - NBN
    Learn More
    €45.00

  • DIN 3858:2005-08

    Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
    8/1/2005 - - - DIN
    Learn More
    From: €54.80

  • NF EN 10226-3, E03-004-3 (07/2005)

    Pipe threads where pressure tight joints are made on the threads - Part 3 : verification by means of limit gauges
    7/1/2005 - Paper - French - AFNOR
    Learn More
    €91.50

  • DIN EN 10226-3:2005-05

    Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges, German version EN 10226-3:2005
    5/1/2005 - - - DIN
    Learn More
    From: €108.80

  • NBN EN 10226-3:2005

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    4/1/2005 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 10226-3:2005

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    4/1/2005 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 10226-3:2005

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    4/1/2005 - PDF - French - NBN
    Learn More
    €77.00

  • UNE-EN 10226-1:2004 (R2019)

    Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
    12/17/2004 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 10226-1:2004 (R2019)

    Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
    12/17/2004 - PDF - English - AENOR
    Learn More
    €62.00

  • DIN 20401:2004-12

    Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
    12/1/2004 - PDF - German - DIN
    Learn More
    €40.80

  • NF EN 10226-1, E03-004-1 (11/2004)

    Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation
    11/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN EN 10226-1:2004-10

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation, German version EN 10226-1:2004
    10/1/2004 - - - DIN
    Learn More
    From: €68.30

  • NBN EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    8/31/2004 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    8/31/2004 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    8/31/2004 - PDF - French - NBN
    Learn More
    €45.00

  • NF EN ISO 228-2, E03-005-2 (11/2003)

    Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges
    11/1/2003 - Paper - French - AFNOR
    Learn More
    €73.30

  • UNE-EN ISO 228-1:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    9/26/2003 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 228-1:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    9/26/2003 - PDF - English - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 228-2:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    9/26/2003 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 228-2:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    9/26/2003 - PDF - English - AENOR
    Learn More
    €64.00

  • DIN 263-3:2003-06

    Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
    6/1/2003 - PDF - German - DIN
    Learn More
    €40.80

  • NF EN ISO 228-1, E03-005-1 (06/2003)

    Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation
    6/1/2003 - Paper - French - AFNOR
    Learn More
    €64.01

  • DIN EN ISO 228-1:2003-05

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000), German version EN ISO 228-1:2003
    5/1/2003 - - - DIN
    Learn More
    From: €61.70

  • DIN EN ISO 228-2:2003-05

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987), German version EN ISO 228-2:2003
    5/1/2003 - - - DIN
    Learn More
    From: €82.60

  • DIN EN ISO 228-1 Beiblatt 1:2003-05

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation, Limits of size
    5/1/2003 - - - DIN
    Learn More
    From: €33.60

  • NBN EN ISO 228-2:2003

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    3/31/2003 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 228-2:2003

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    3/31/2003 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 228-2:2003

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    3/31/2003 - PDF - French - NBN
    Learn More
    €56.00

  • NBN EN ISO 228-1:2003

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    3/31/2003 - PDF - German - NBN
    Learn More
    €56.00

  • NBN EN ISO 228-1:2003

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    3/31/2003 - PDF - English - NBN
    Learn More
    €56.00

  • NBN EN ISO 228-1:2003

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    3/31/2003 - PDF - French - NBN
    Learn More
    €56.00

  • JIS B 1060:2003 (R2013)

    Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
    3/20/2003 - PDF - Japanese - JSA
    Learn More
    €32.50

  • BS EN ISO 228-2:2003

    Pipe threads where pressure-tight joints are not made on the Verification by means of limit gauges
    2/26/2003 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 228-1:2003

    Pipe threads where pressure-tight joints are not made on the Dimensions, tolerances and designation
    2/26/2003 - PDF - English - BSI
    Learn More
    €154.05

  • DIN EN ISO 15245-2:2002-04

    Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001), German version EN ISO 15245-2:2001
    4/1/2002 - - - DIN
    Learn More
    From: €54.80

  • BS EN ISO 15245-2:2001

    Gas cylinders. Parallel threads for connection of valves to gas cylinders Gauge inspection
    3/11/2002 - PDF - English - BSI
    Learn More
    €154.05

  • JIS B 1059:2001 (R2016)

    Drilling screws with tapping screw thread - Mechanical and functional properties
    12/20/2001 - PDF - Japanese - JSA
    Learn More
    €32.50

  • ISO 228-1:2000

    Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
    9/1/2000 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 228-1:2000

    Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
    9/1/2000 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 7-2:2000

    Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges
    9/1/2000 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 7-2:2000

    Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges
    9/1/2000 - Paper - French - ISO
    Learn More
    €144.00

  • UNE-EN ISO 1478:2000 (R2009)

    TAPPING SCREWS THREAD (ISO 1478:1999)
    5/29/2000 - PDF - Spanish - AENOR
    Learn More
    €29.00

  • UNE-EN ISO 1478:2000 (R2009)

    TAPPING SCREWS THREAD (ISO 1478:1999)
    5/29/2000 - PDF - English - AENOR
    Learn More
    €34.00

  • DIN 263-1:2000-03

    Single- and double-start acme thread with clearance for rail vehicles - Part 1: Dimensions
    3/1/2000 - PDF - German - DIN
    Learn More
    €33.60

  • DIN EN ISO 10666:2000-02

    Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999), German version EN ISO 10666:1999
    2/1/2000 - - - DIN
    Learn More
    From: €54.80

  • NBN EN ISO 1478:2000

    Tapping screws thread (ISO 1478:1999)
    2/1/2000 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN ISO 1478:2000

    Tapping screws thread (ISO 1478:1999)
    2/1/2000 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN ISO 1478:2000

    Tapping screws thread (ISO 1478:1999)
    2/1/2000 - PDF - French - NBN
    Learn More
    €45.00

  • BS EN ISO 1478:2000

    Tapping screw thread
    1/15/2000 - PDF - English - BSI
    Learn More
    €130.35

  • ASME B1.5-1997 (R2014)

    Acme Screw Threads (B1.5 - 1997)
    12/6/1999 - PDF DRM - English - ASME
    Learn More
    €89.30

  • DIN EN ISO 1478:1999-12

    Tapping screw thread (ISO 1478:1999), German version EN ISO 1478:1999
    12/1/1999 - - - DIN
    Learn More
    From: €40.80

  • ISO 1478:1999

    Tapping screws thread
    11/1/1999 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 1478:1999

    Tapping screws thread
    11/1/1999 - Paper - French - ISO
    Learn More
    €40.00

  • JIS B 0202:1999 (R2014)

    Parallel pipe threads
    3/20/1999 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0203:1999 (R2014)

    Taper pipe threads
    3/20/1999 - PDF - Japanese - JSA
    Learn More
    €32.50

  • DIN 168-1:1998-04

    Knuckle threads - Part 1: Especially for glass containers, thread sizes
    4/1/1998 - - - DIN
    Learn More
    From: €40.80

  • DIN 405-1:1997-11

    General purpose knuckle threads - Part 1: Profiles, nominal sizes
    11/1/1997 - - - DIN
    Learn More
    From: €43.70

  • DIN 405-2:1997-11

    General purpose knuckle threads - Part 2: Deviations and tolerances
    11/1/1997 - - - DIN
    Learn More
    From: €43.70

  • DIN 405-3:1997-11

    General purpose knuckle threads - Part 3: Gauges for external and internal thread, types of gauges, profiles, tolerances
    11/1/1997 - - - DIN
    Learn More
    From: €62.60

  • JIS B 1119:1995 (R2015)

    Machine screws and nuts for spectacle frames
    3/1/1995 - PDF - Japanese - JSA
    Learn More
    €32.50

  • ISO 7-1:1994

    Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
    5/1/1994 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 7-1:1994

    Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
    5/1/1994 - Paper - French - ISO
    Learn More
    €61.00

  • DIN 6341-2:1993-10

    Draw-in collets; thread of the collets; nominal size, limit deviations
    10/1/1993 - PDF - German - DIN
    Learn More
    €47.60

  • NF ISO 6696, R39-101 (12/1992)

    Cycles. Screw threads used in bottom bracket assemblies.
    12/1/1992 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 6698, R32-402 (12/1992)

    Cycles. Screw threads used to assemble freewheels on bicycle hubs.
    12/1/1992 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 8488, R34-114 (12/1992)

    Cycles. Screw threads used to assemble head fittings on bicycle forks.
    12/1/1992 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF F00-017 (06/1992)

    General railway equipment. Round screw threads. Verification. - Matériel ferroviaire en général
    6/1/1992 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF F00-032 (06/1992)

    General railway equipment. Round screw threads. Profile. - Matériel ferroviaire en général
    6/1/1992 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF F00-016 (06/1992)

    General railway equipment. Round screw threads. Sizes and tolerances. - Matériel ferroviaire en général
    6/1/1992 - Paper - French - AFNOR
    Learn More
    €40.69

  • AS 1722.2:1992

    Pipe threads of Whitworth form Fastening pipe threads
    1/1/1992 - PDF sécurisé - English - SA
    Learn More
    €89.15

  • DIN 2781:1990-09

    Machine tools; buttress thread 45°, single start, for hydraulic presses
    9/1/1990 - PDF - German - DIN
    Learn More
    €30.80

  • DIN 20314:1990-06

    Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
    6/1/1990 - PDF - German - DIN
    Learn More
    €33.60

  • DIN 20400:1990-01

    Knuckle threads for the mining; threads with large load-bearing depth
    1/1/1990 - PDF - German - DIN
    Learn More
    €40.80

  • JIS B 0262:1989 (R2015)

    Inspection method for taper screw gauges
    9/1/1989 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0262:1989

    Inspection method for taper screw gauges
    1/1/1989 - PDF - English - JSA
    Learn More
    €72.93

  • DIN 55525:1988-11

    Preferred threads, for plastic and glass containers with unified screw cap, buttress thread, dimensions
    11/1/1988 - - - DIN
    Learn More
    €40.80

  • ISO 228-2:1987

    Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification by means of limit gauges
    8/1/1987 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 228-2:1987

    Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification by means of limit gauges
    8/1/1987 - Paper - French - ISO
    Learn More
    €92.00

  • UNE 68054:1986

    EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTION THREADING
    11/15/1986 - PDF - Spanish - AENOR
    Learn More
    €10.00

  • DIN 513-1:1985-04

    Metric buttress threads, thread profiles
    4/1/1985 - - - DIN
    Learn More
    From: €33.60

  • DIN 513-3:1985-04

    Metric buttress threads, deviations and tolerances
    4/1/1985 - - - DIN
    Learn More
    From: €54.80

  • DIN 513-2:1985-04

    Metric buttress threads, general plan
    4/1/1985 - - - DIN
    Learn More
    From: €33.60

  • JIS B 0253:1985 (R2015)

    Gauges for taper pipe threads
    3/1/1985 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0253:1985

    Gauges for taper pipe threads
    1/1/1985 - PDF - English - JSA
    Learn More
    €63.58

  • BS 4185-10:1977

    Machine tool components Trapezoidal threads for lead and feed screw assemblies
    3/31/1977 - PDF - English - BSI
    Learn More
    €130.35

  • DIN 76-3:1977-01

    Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
    1/1/1977 - - - DIN
    Learn More
    From: €33.60

  • DIN 5606-2:1975-03

    Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
    3/1/1975 - PDF - German - DIN
    Learn More
    €23.80

  • DIN 7998:1975-02

    Threads and Thread Ends for Wood Screws
    2/1/1975 - - - DIN
    Learn More
    From: €23.80

  • DIN 30295-1:1973-05

    Rounded Trapezoidal Threads, Nominal Dimensions
    5/1/1973 - - - DIN
    Learn More
    From: €23.80

  • DIN 30295-2:1973-05

    Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
    5/1/1973 - - - DIN
    Learn More
    From: €23.80

  • DIN 262-2:1973-05

    Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
    5/1/1973 - - - DIN
    Learn More
    From: €23.80

  • DIN 264-1:1973-05

    Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
    5/1/1973 - - - DIN
    Learn More
    From: €23.80

  • DIN 264-2:1973-05

    Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
    5/1/1973 - - - DIN
    Learn More
    From: €23.80

  • DIN 262-1:1973-05

    Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
    5/1/1973 - - - DIN
    Learn More
    From: €23.80

  • JIS B 0201:1973

    Miniature screw threads
    1/1/1973 - PDF - English - JSA
    Learn More
    €36.47

  • DIN 40431-2:1972-11

    Steel Conduit Thread, Thread Gauges, 'Go' and 'Not go' Thread Plug Gauges
    11/1/1972 - - - DIN
    Learn More
    From: €23.80

  • DIN 40430:1971-02

    Steel Conduit Thread, Dimensions
    2/1/1971 - - - DIN
    Learn More
    From: €23.80

  • NF F11-003 (12/1970)

    Railway transport equipment. Hand brake. Screws and nuts. Pitches and profiles. Screw drives.
    12/1/1970 - Paper - French - AFNOR
    Learn More
    €21.90

  • DIN 40431-1:1970-11

    Steel Conduit Thread, Thread Gauges, 'Go' and 'Not go' Thread Ring Gauges
    11/1/1970 - - - DIN
    Learn More
    From: €21.80

  • DIN 15403:1969-12

    Lifting Hooks for Hoists, Knuckle Threads
    12/1/1969 - - - DIN
    Learn More
    From: €23.80

  • NF L40-102 (05/1966)

    Aircraft fluid installations. Connectors, axial sealing, male thread fittings. Sim thread (rech.)
    5/1/1966 - Paper - French - AFNOR
    Learn More
    €21.90

  • NBN 115:1961


    3/3/1962 - PDF - French - NBN
    Learn More
    €45.00

  • NBN 115:1961


    3/3/1962 - PDF - Dutch - NBN
    Learn More
    €45.00

  • NF L22-040 (12/1956)

    Aircraft fasteners. Manufacturing tolerances (rech.).
    12/1/1956 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF L05-210 (10/1956)

    Screw thread tolerances. Selection for aircraft industry (rech.).
    10/1/1956 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF L05-420 (04/1955)

    Buttress screw threads.
    4/1/1955 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF L05-020 (04/1954)

    Screw threads. Thread run-outs (rech.).
    4/1/1954 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF L05-110 (03/1953)

    Screw threads. Selection for aircraft industry (rech.).
    3/1/1953 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF L05-025 (12/1950)

    Screw threads. Undercut relief (rech.).
    12/1/1950 - Paper - French - AFNOR
    Learn More
    €21.90

  • BS 811:1950

    Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
    5/24/1950 - PDF - English - BSI
    Learn More
    €215.67

167 Item(s)

Set Ascending Direction
per page

List  Grid