21.040 : Screw threads
-
BS 811:1950
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
5/24/1950 - PDF - English -
Learn More€250.00 -
€250.00
-
€25.50
-
€180.00
-
€25.50
-
€25.50
-
€25.50
-
NF L05-210 (10/1956) (R2011)
Screw thread tolerances. Selection for aircraft industry (rech.).
10/1/1956 - Paper - French -
Learn More€25.50 -
€25.67
-
BS 2827:1957
Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
2/8/1957 - PDF - English -
Learn More€151.00 -
€293.00
-
€14.00
-
BS 3580:1964
Guide to design considerations on the strength of screw threads
2/28/1964 - PDF - English -
Learn More€250.00 -
€89.00
-
€89.00
-
NF L40-102 (05/1966) (R2011)
Aircraft fluid installations. Connectors, axial sealing, male thread fittings. Sim thread (rech.)
5/1/1966 - Paper - French -
Learn More€25.67 -
€28.60
-
€22.99
-
BS 61:1969
Specification for threads for light gauge copper tubes and fittings
12/31/1969 - PDF - English -
Learn More€180.00 -
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - English -
Learn More€28.60 -
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - German -
Learn More€22.99 -
€22.99
-
€28.60
-
DIN 2510-2:1971-08
Bolted Connections with Reduced Shank, Metric Thread with Large Clearence, Nominal Dimensions and Limits
8/1/1971 - PDF - English -
Learn More€28.60 -
DIN 2510-2:1971-08
Bolted Connections with Reduced Shank, Metric Thread with Large Clearence, Nominal Dimensions and Limits
8/1/1971 - PDF - German -
Learn More€22.99 -
DIN 7952-2:1971-10
Sheet Metal Rim Holes with Screw Thread, Prepunch Hole Diameters
10/1/1971 - PDF - English -
Learn More€28.60 -
DIN 7952-2:1971-10
Sheet Metal Rim Holes with Screw Thread, Prepunch Hole Diameters
10/1/1971 - PDF - German -
Learn More€22.99 -
€180.00
-
DIN 103-5:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
10/1/1972 - PDF - German -
Learn More€52.90 -
DIN 103-7:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
10/1/1972 - PDF - English -
Learn More€74.58 -
DIN 103-6:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
10/1/1972 - PDF - English -
Learn More€57.57 -
DIN 103-5:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
10/1/1972 - PDF - English -
Learn More€66.07 -
DIN 103-8:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
10/1/1972 - PDF - German -
Learn More€52.90 -
DIN 103-7:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
10/1/1972 - PDF - German -
Learn More€59.63 -
DIN 103-6:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
10/1/1972 - PDF - German -
Learn More€45.98 -
DIN 103-8:1972-10
ISO Metric Trapezoidal Screw Threads, Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
10/1/1972 - PDF - English -
Learn More€66.07 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - English -
Learn More€28.60 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - German -
Learn More€22.99 -
€42.00
-
ISO 263:1973 (R2020)
ISO inch screw threads
General plan and selection for screws, bolts and nuts
4/1/1973 - Paper - French -
Learn More€48.00 -
ISO 263:1973 (R2020)
ISO inch screw threads
General plan and selection for screws, bolts and nuts
4/1/1973 - Paper - English -
Learn More€48.00 -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - German -
Learn More€22.99 -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - English -
Learn More€28.60 -
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
5/1/1973 - PDF - German -
Learn More€22.99 -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - German -
Learn More€22.99 -
€22.99
-
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - German -
Learn More€22.99 -
DIN 264-2:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - English -
Learn More€28.60 -
DIN 30295-2:1973-05
Rounded Trapezoidal Threads, Limiting Screw Thread Dimensions and Allowances, Permissible Deviations and Permissible Wear of Thread Gauges
5/1/1973 - PDF - English -
Learn More€28.60 -
DIN 264-1:1973-05
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - English -
Learn More€28.60 -
DIN 262-1:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Nominal Dimensions
5/1/1973 - PDF - German -
Learn More€22.99 -
€28.60
-
DIN 262-2:1973-05
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm, Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
5/1/1973 - PDF - English -
Learn More€28.60 -
€28.60
-
€22.99
-
DIN 5606-2:1975-03
Gauging of threads on workpieces for railway vehicles, round thread, acme thread, rounded acme thread
3/1/1975 - PDF - German -
Learn More€22.99 -
DIN 13-28:1975-09
ISO Metric Screw Threads, Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter, Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles
9/1/1975 - PDF - English -
Learn More€74.58 -
DIN 13-28:1975-09
ISO Metric Screw Threads, Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter, Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles
9/1/1975 - PDF - German -
Learn More€59.63 -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - German -
Learn More€32.34 -
DIN 76-3:1977-01
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
1/1/1977 - PDF - English -
Learn More€40.56 -
BS 4185-10:1977
Machine tool components Trapezoidal threads for lead and feed screw assemblies
3/31/1977 - PDF - English -
Learn More€151.00 -
€32.34
-
€40.56
-
DIN 103-3:1977-04
ISO Metric Trapezoidal Screw Thread, Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
4/1/1977 - PDF - German -
Learn More€52.90 -
€32.34
-
€40.56
-
DIN 103-3:1977-04
ISO Metric Trapezoidal Screw Thread, Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
4/1/1977 - PDF - English -
Learn More€66.07 -
€32.34
-
€40.56
-
BS 5590:1978
Specification for screw thread metric series measuring cylinders
5/31/1978 - PDF - English -
Learn More€151.00 -
€68.00
-
UNE 17707:1978
ISO GENERAL PURPOSE METRIC SCREW THREADS. TOLERANCES. PRINCIPLES AND BASIC DATA.
12/15/1978 - PDF - Spanish -
Learn More€53.00 -
€151.00
-
PD 6507:1982
Guidance on metric screw threads and fasteners for use by model engineers
9/30/1982 - PDF - English -
Learn More€151.00 -
€114.00
-
€58.00
-
NBN E 03-002:1983
ISO triangular screw thread - Basic profile and design profiles
8/1/1983 - PDF - French, Dutch -
Learn More€58.00 -
NBN E 03-003:1984
ISO metric triangular screw thread - General and principal dimensions
11/1/1983 - PDF - French, Dutch -
Learn More€58.00 -
ASME B1.2-1983 (R2017)
Gages and Gaging for Unified Inch Screw Threads (B1.2 - 1983)
6/15/1984 - Papier - English -
Learn More€181.00 -
DIN 76-2:1984-12
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
12/1/1984 - PDF - English -
Learn More€40.56 -
DIN 76-2:1984-12
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
12/1/1984 - PDF - German -
Learn More€32.34 -
DIN 103-9:1985-02
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
2/1/1985 - PDF - German -
Learn More€65.89 -
DIN 103-9:1985-02
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
2/1/1985 - PDF - English -
Learn More€82.52 -
€32.34
-
€32.34
-
€40.56
-
€40.56
-
NBN E 03-004:1986
ISO metric triangular screw threads - Limit dimensions and tolerances
3/14/1986 - PDF - French, Dutch -
Learn More€121.00 -
€45.98
-
UNE 68054:1986 (R2021)
EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTION THREADING
11/15/1986 - PDF - Spanish -
Learn More€14.00 -
DIN 14-4:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; limits
2/1/1987 - PDF - German -
Learn More€39.35 -
DIN 14-2:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
2/1/1987 - PDF - German -
Learn More€39.35 -
DIN 14-3:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
2/1/1987 - PDF - German -
Learn More€39.35 -
DIN 14-1:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; basic profile
2/1/1987 - PDF - German -
Learn More€39.35 -
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
8/20/1987 - Paper - French -
Learn More€110.00 -
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
8/20/1987 - Paper - English -
Learn More€110.00 -
€35.00
-
€77.00
-
DIN 55525:1988-11
Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
11/1/1988 - PDF - German -
Learn More€39.35 -
DIN 20314:1990-06
Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
6/1/1990 - PDF - German -
Learn More€32.34 -
DIN 2781:1990-09
Machine tools; buttress thread 45°, single start, for hydraulic presses
9/1/1990 - PDF - German -
Learn More€32.34 -
BS 4377:1991
Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
5/31/1991 - PDF - English -
Learn More€180.00 -
BS 1936-2:1991 (R2012)
Undercuts and runouts for screw threads Specification ISO metric
11/29/1991 - PDF - English -
Learn More€180.00 -
NF F00-017 (06/1992) (R2012)
General railway equipment. Round screw threads. Verification. - Matériel ferroviaire en général
6/1/1992 - Paper - French -
Learn More€75.67 -
NF F00-032 (06/1992) (R2012)
General railway equipment. Round screw threads. Profile. - Matériel ferroviaire en général
6/1/1992 - Paper - French -
Learn More€34.67 -
NF F00-016 (06/1992)
General railway equipment. Round screw threads. Sizes and tolerances. - Matériel ferroviaire en général
6/1/1992 - Paper - French -
Learn More€48.00 -
DIN 8141-2:1993-07
ISO-metric screw threads, coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys, nominal diameter from 5 mm to 16 mm, gauges for internal and external threads
7/1/1993 - PDF - German -
Learn More€45.98 -
DIN 8141-1:1993-07
ISO-metric screw threads, coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys, nominal diameter from 5 mm to 16 mm, nominal sizes, tolerances and limits of sizes
7/1/1993 - PDF - German -
Learn More€45.98 -
DIN 8141-2:1993-07
ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Gauges for internal and external threads
7/1/1993 - PDF - English -
Learn More€57.57 -
DIN 8141-1:1993-07
ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size
7/1/1993 - PDF - English -
Learn More€57.57 -
DIN 6341-2:1993-10
Draw-in collets; thread of the collets; nominal size, limit deviations
10/1/1993 - PDF - German -
Learn More€45.98 -
DIN ISO 6410-1:1993-12
Technical drawings; screw threads and threaded parts; general conventions; identical with ISO 6410-1:1993
12/1/1993 - PDF - German -
Learn More€45.98 -
DIN ISO 6410-2:1993-12
Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
12/1/1993 - PDF - German -
Learn More€45.98 -
€110.00
-
€110.00
-
ISO 7-1:1994 (R2020)
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
5/12/1994 - Paper - French -
Learn More€72.00 -
ISO 7-1:1994 (R2020)
Pipe threads where pressure-tight joints are made on the threads
Part 1: Dimensions, tolerances and designation
5/12/1994 - Paper - English -
Learn More€72.00 -
BS 7753:1994
Specification for performance of prevailing torque wire thread inserts
9/15/1994 - PDF - English -
Learn More€151.00 -
BS 7752-2:1994
Free running type wire thread inserts Specification for ISO metric fine pitch threads
10/15/1994 - PDF - English -
Learn More€151.00 -
€174.00
-
€174.00
-
NBN EN ISO 6410-1:1996
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
6/24/1996 - PDF - English -
Learn More€58.00 -
NBN EN ISO 6410-1:1996
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
6/24/1996 - PDF - French -
Learn More€58.00 -
NBN EN ISO 6410-1:1996
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
6/24/1996 - PDF - German -
Learn More€58.00 -
BS EN ISO 6410-2:1996
Technical drawings. Screw threads and threaded parts thread inserts
8/15/1996 - PDF - English -
Learn More€151.00 -
BS EN ISO 6410-1:1996
Technical drawings. Screw threads and threaded parts General conventions
8/15/1996 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 6410-2:1996
TECHNICAL DRAWINGS. SCRES THREADS AND THREADED PARTS. PART 2: SCREW THREAD INSERTS. (ISO 6410-2:1993).
10/24/1996 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 6410-1:1996
TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 1: GENERAL CONVENTIONS. (ISO 6410-1:1993).
10/24/1996 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 6410-2:1996
TECHNICAL DRAWINGS. SCRES THREADS AND THREADED PARTS. PART 2: SCREW THREAD INSERTS. (ISO 6410-2:1993).
10/24/1996 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 6410-1:1996
TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 1: GENERAL CONVENTIONS. (ISO 6410-1:1993).
10/24/1996 - PDF - English -
Learn More€72.00 -
DIN ISO 1502:1996-12
ISO general purpose metric screw threads - Gauges and gauging (ISO 1502:1996)
12/1/1996 - PDF - German -
Learn More€92.62 -
DIN ISO 1502:1996-12
ISO general purpose metric screw threads - Gauges and gauging (ISO 1502:1996)
12/1/1996 - PDF - English -
Learn More€115.98 -
€99.00
-
DIN 158-2:1997-06
Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features
6/1/1997 - PDF - German -
Learn More€59.63 -
DIN 158-1:1997-06
Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
6/1/1997 - PDF - German -
Learn More€59.63 -
DIN 158-2:1997-06
Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features
6/1/1997 - PDF - English -
Learn More€74.58 -
DIN 158-1:1997-06
Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
6/1/1997 - PDF - English -
Learn More€74.58 -
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
11/1/1997 - PDF - German -
Learn More€65.89 -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
11/1/1997 - PDF - German -
Learn More€45.98 -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
11/1/1997 - PDF - German -
Learn More€45.98 -
DIN 405-3:1997-11
General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
11/1/1997 - PDF - English -
Learn More€82.52 -
DIN 405-2:1997-11
General purpose knuckle threads - Part 2: Deviations and tolerances
11/1/1997 - PDF - English -
Learn More€57.57 -
DIN 405-1:1997-11
General purpose knuckle threads - Part 1: Profiles, nominal sizes
11/1/1997 - PDF - English -
Learn More€57.57 -
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers; thread sizes
4/1/1998 - PDF - German -
Learn More€39.35 -
DIN 168-1:1998-04
Knuckle threads - Part 1: Especially for glass containers; thread sizes
4/1/1998 - PDF - English -
Learn More€49.16 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
NF ISO 965-2, E03-053 (03/1999)
ISO general purpose metric screw threads. Tolerances. Part 2 : limits of sizes for general purpose external and internal screw threads. Medium quality. - Filetages métriques ISO pour usages généraux
3/1/1999 - Paper - French -
Learn More€75.67 -
NF ISO 261, E03-013 (03/1999)
ISO general purpose metric threads. General plan. - Filetages métriques ISO pour usages généraux
3/1/1999 - Paper - French -
Learn More€60.67 -
BS ISO 262:1998
ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
4/15/1999 - PDF - English -
Learn More€151.00 -
€151.00
-
DIN ISO 261:1999-11
ISO general purpose metric screw threads - General plan (ISO 261:1998)
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN ISO 965-3:1999-11
ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads(ISO 965-3:1998)
11/1/1999 - PDF - English -
Learn More€107.48 -
DIN 13-10:1999-11
ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads, nominal diameter from 70 mm to 500 mm
11/1/1999 - PDF - German -
Learn More€32.34 -
DIN 13-8:1999-11
General purpose ISO metric screw threads - Nominal sizes for 3 mm fine pitch threads with diameters from 28 mm to 300 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN 13-5:1999-11
ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads, nominal diameter from 7,5 mm to 200 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-3:1999-11
General purpose ISO metric screw threads - Nominal sizes for 0,5 mm fine pitch threads with diameters from 3,5 mm to 90 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN ISO 262:1999-11
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
11/1/1999 - PDF - German -
Learn More€32.34 -
DIN ISO 965-2:1999-11
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality (ISO 965-2:1998)
11/1/1999 - PDF - English -
Learn More€66.07 -
DIN 13-11:1999-11
ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads, nominal diameter from 130 mm to 1000 mm
11/1/1999 - PDF - German -
Learn More€32.34 -
DIN 13-9:1999-11
General purpose ISO metric screw threads - Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN 13-6:1999-11
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads, nominal diameter from 12 mm to 300 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-4:1999-11
General purpose ISO metric screw threads - Nominal sizes for 0,75 mm fine pitch threads with diameters from 5 mm to 110 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN 13-1:1999-11
ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads, nominal diameter from 1 mm to 68 mm
11/1/1999 - PDF - German -
Learn More€32.34 -
DIN ISO 261:1999-11
ISO general purpose metric screw threads - General plan (ISO 261:1998)
11/1/1999 - PDF - English -
Learn More€57.57 -
€52.90
-
DIN 13-19:1999-11
ISO general purpose metric screw threads - Part 19: Nominal profiles
11/1/1999 - PDF - German -
Learn More€32.34 -
DIN 13-10:1999-11
General purpose ISO metric screw threads - Nominal sizes for 6 mm fine pitch threads with diameters from 70 mm to 500 mm
11/1/1999 - PDF - English -
Learn More€40.56 -
DIN 13-7:1999-11
ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads, nominal diameter from 17 mm to 300 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-5:1999-11
General purpose ISO metric screw threads - Nominal sizes for 1 mm and 1,25 mm fine pitch threads with diameters from 7,5 mm to 200 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN 13-2:1999-11
ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads, nominal diameter from 1 mm to 50 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN ISO 262:1999-11
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
11/1/1999 - PDF - English -
Learn More€40.56 -
DIN ISO 965-3:1999-11
ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional threads (ISO 965-3:1998)
11/1/1999 - PDF - German -
Learn More€85.79 -
DIN 13-11:1999-11
General purpose ISO metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads with diameters from 130 mm to 1 000 mm
11/1/1999 - PDF - English -
Learn More€40.56 -
DIN 13-8:1999-11
ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads, nominal diameter from 28 mm to 300 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-6:1999-11
General purpose ISO metric screw threads - Nominal sizes for 1,5 mm fine pitch threads with diameters from 12 mm to 300 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN 13-3:1999-11
ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads, nominal diameter from 3,5 mm to 90 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-1:1999-11
General purpose ISO metric screw threads - Nominal sizes for 1 mm to 68 mm diameter coarse pitch threads
11/1/1999 - PDF - English -
Learn More€40.56 -
DIN ISO 965-2:1999-11
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads, medium quality (ISO 965-2:1998)
11/1/1999 - PDF - German -
Learn More€52.90 -
€66.07
-
€40.56
-
DIN 13-9:1999-11
ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads, nominal diameter from 40 mm to 300 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-7:1999-11
General purpose ISO metric screw threads - Nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
DIN 13-4:1999-11
ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads, nominal diameter from 5 mm to 110 mm
11/1/1999 - PDF - German -
Learn More€45.98 -
DIN 13-2:1999-11
General purpose ISO metric screw threads - Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads with diameters from 1 mm to 50 mm
11/1/1999 - PDF - English -
Learn More€57.57 -
€48.00
-
€48.00
-
€60.50
-
DIN EN ISO 1478:1999-12
Tapping screw thread (ISO 1478:1999), German version EN ISO 1478:1999
12/1/1999 - PDF - German -
Learn More€39.35 -
€49.16
-
DIN 2282-1:2000-01
Verification of geometrical parameters - "GO" screw gauging members - Part 1: "GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/1/2000 - PDF - German -
Learn More€52.90 -
DIN 2284-1:2000-01
Verification of geometrical parameters - "NOT GO" screw gauging members - Part 1: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/1/2000 - PDF - German -
Learn More€45.98 -
DIN 2282-1:2000-01
GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
1/1/2000 - PDF - English -
Learn More€66.07 -
DIN 2284-1:2000-01
NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
1/1/2000 - PDF - English -
Learn More€57.57 -
€151.00
-
€37.00