21.040 : Screw threads

Items 1 to 200 of 479 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  • NF ISO 2904, E03-622 (05/2020)


    5/1/2020 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 68-1/A1, E03-001/A1 (05/2020)


    5/1/2020 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF ISO 68-2/A1, E03-006/A1 (05/2020)


    5/1/2020 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF ISO 1501/A1, E03-500/A1 (05/2020)


    5/1/2020 - Paper - French - AFNOR
    Learn More
    €21.90

  • BS ISO 2904:2020

    ISO metric trapezoidal screw threads. Basic dimensions
    3/2/2020 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN ISO 11363-2:2017 + Redline

    Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN ISO 11363-1:2018 + Redline

    Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS ISO 68-2:1998+A1:2020

    ISO general purpose screw threads. Basic profile Inch threads
    2/14/2020 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 68-1:1998+A1:2020

    ISO general purpose screw threads. Basic profile Metric threads
    2/13/2020 - PDF - English - BSI
    Learn More
    €130.35

  • BS ISO 1501:2009+A1:2020

    ISO miniature screw threads
    2/10/2020 - PDF - English - BSI
    Learn More
    €215.67

  • 19/30397491 DC:2019

    BS ISO 2904. ISO metric trapezoidal screw threads. Basic dimensions
    8/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN ISO 2702, E25-650-1PR (05/2019)

    Fixations - Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques et physiques
    5/1/2019 - Paper - English, French - AFNOR
    Learn More
    €60.48

  • DIN ISO 289-1:2018-12

    Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1: Determination of Mooney viscosity (ISO 289-1:2015)
    12/11/2018 - - - DIN
    Learn More
    From: €33.60

  • UNE-EN ISO 11363-1:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
    5/3/2018 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN ISO 11363-1:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
    5/3/2018 - PDF - English - AENOR
    Learn More
    €62.00

  • DIN EN ISO 11363-1:2018-05

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018); German version EN ISO 11363-1:2018
    5/1/2018 - - - DIN
    Learn More
    From: €68.30

  • BS EN ISO 11363-1:2018

    Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Specifications
    3/6/2018 - PDF - English - BSI
    Learn More
    €154.05

  • DIN EN ISO 11363-2:2018-03

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017); German version EN ISO 11363-2:2017
    3/1/2018 - - - DIN
    Learn More
    From: €89.00

  • UNE-EN ISO 11363-2:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
    2/21/2018 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 11363-2:2018

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
    2/21/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • NF EN ISO 11363-1, E29-674-1 (02/2018)

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1 : specifications - Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 1 : Spécifications
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS EN ISO 11363-2:2017

    Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Inspection gauges
    1/17/2018 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN ISO 11363-2, E29-674-2 (12/2017)

    Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2 : inspection gauges - Bouteilles à gaz - Filetages coniques 17E et 25E pour le raccordement des robinets sur les bouteilles à gaz - Partie 2 : Calibres de contrôle
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €64.01

  • DIN ISO 965-1:2017-05

    ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013)
    5/1/2017 - - - DIN
    Learn More
    From: €89.00

  • DIN 13-50:2017-05

    ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
    5/1/2017 - - - DIN
    Learn More
    From: €50.30

  • DIN 13-52:2017-05

    ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
    5/1/2017 - - - DIN
    Learn More
    From: €33.60

  • JIS B 0201:2017

    Miniature screw threads
    3/21/2017 - PDF - Japanese - JSA
    Learn More
    €36.27

  • DIN 8140-2 Berichtigung 1:2017-03

    Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08
    3/1/2017 - - - DIN
    Learn More
    €0.00

  • DIN EN ISO 11381:2017-02

    Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016); German version EN ISO 11381:2016
    2/1/2017 - - - DIN
    Learn More
    From: €54.80

  • UNE-EN ISO 11381:2016

    Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016)
    12/28/2016 - PDF - Spanish - AENOR
    Learn More
    €38.00

  • UNE-EN ISO 11381:2016

    Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016)
    12/28/2016 - PDF - English - AENOR
    Learn More
    €45.00

  • NF ISO 2901, E03-615 (12/2016)

    ISO metric trapezoidal screw threads - Basic and design profiles - Filetages métriques trapézoïdaux ISO - Profils de base et nominal
    12/1/2016 - Paper - French - AFNOR
    Learn More
    €40.69

  • NBN EN ISO 11381:2016

    Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016)
    11/23/2016 - PDF - German - NBN
    Learn More
    €30.00

  • NBN EN ISO 11381:2016

    Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016)
    11/23/2016 - PDF - English - NBN
    Learn More
    €30.00

  • NBN EN ISO 11381:2016

    Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016)
    11/23/2016 - PDF - French - NBN
    Learn More
    €30.00

  • NF ISO 2902, E03-616 (11/2016)

    ISO metric trapezoidal screw threads - General plan - Filetages métriques trapézoïdaux ISO - Vue d'ensemble
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €29.39

  • NF ISO 2903, E03-617 (11/2016)

    ISO metric trapezoidal screw threads - Tolerances - Filetages métriques trapézoïdaux ISO - Tolérances
    11/1/2016 - Paper - French - AFNOR
    Learn More
    €64.01

  • BS ISO 2903:2016

    ISO metric trapezoidal screw threads. Tolerances
    9/30/2016 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 2901:2016

    ISO metric trapezoidal screw threads. Basic and design profiles
    9/30/2016 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 2902:2016

    ISO metric trapezoidal screw threads. General plan
    9/30/2016 - PDF - English - BSI
    Learn More
    €130.35

  • ISO 2903:2016

    ISO metric trapezoidal screw threads — Tolerances
    9/1/2016 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 2903:2016

    ISO metric trapezoidal screw threads — Tolerances
    9/1/2016 - Paper - French - ISO
    Learn More
    €92.00

  • ISO 2901:2016

    ISO metric trapezoidal screw threads — Basic and design profiles
    9/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2901:2016

    ISO metric trapezoidal screw threads — Basic and design profiles
    9/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • ISO 2902:2016

    ISO metric trapezoidal screw threads — General plan
    9/1/2016 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2902:2016

    ISO metric trapezoidal screw threads — General plan
    9/1/2016 - Paper - French - ISO
    Learn More
    €40.00

  • DIN 976-1:2016-09

    Fasteners - Stud bolts - Part 1: Metric thread
    9/1/2016 - - - DIN
    Learn More
    From: €54.80

  • DIN 3852-21:2016-09

    Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing
    9/1/2016 - PDF - German - DIN
    Learn More
    €61.70

  • DIN 76-1:2016-08

    Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
    8/1/2016 - - - DIN
    Learn More
    From: €50.30

  • DIN ISO 6696:2016-07

    Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
    7/1/2016 - - - DIN
    Learn More
    From: €61.70

  • DIN ISO 8488:2016-07

    Cycles - Screw threads used to assemble head fittings on bicycle forks (ISO 8488:1986)
    7/1/2016 - - - DIN
    Learn More
    From: €61.70

  • BS EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the Taper external and taper internal threads. Dimensions, tolerances designation
    4/30/2016 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN 10226-3:2005

    Pipes threads where pressure-tight joints are made on the Verification by means of limit gauges
    4/30/2016 - PDF - English - BSI
    Learn More
    €253.59

  • DIN 7500-2:2016-04

    Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
    4/1/2016 - - - DIN
    Learn More
    From: €33.60

  • JIS B 1007:2015

    Tapping screws thread
    12/21/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 2278:2015-03

    Geometrical product specifications (GPS) - Gauges for ISO metric screw threads - Dirt grooves
    3/1/2015 - PDF - German - DIN
    Learn More
    €40.80

  • AS/NZS 4411:2015

    Tapping screws thread
    1/1/2015 - PDF sécurisé - English - SA
    Learn More
    €44.88

  • DIN EN ISO 27627:2014-07

    Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO 27627:2014); English version EN ISO 27627:2014
    7/1/2014 - PDF - English - DIN
    Learn More
    €103.00

  • BS 3643-2:2007

    ISO metric screw threads Specification for selected limits of size
    6/30/2014 - PDF - English - BSI
    Learn More
    €284.40

  • JIS B 1003:2014

    Fasteners - Ends of parts with external ISO metric thread
    4/21/2014 - PDF - Japanese - JSA
    Learn More
    €32.50

  • UNE-EN ISO 1179-1:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
    1/22/2014 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 1179-1:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
    1/22/2014 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN ISO 1179-2:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
    1/22/2014 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN ISO 1179-2:2014

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
    1/22/2014 - PDF - English - AENOR
    Learn More
    €62.00

  • JIS B 1003:2014

    Fasteners -- Ends of parts with external ISO metric thread
    1/1/2014 - PDF - English - JSA
    Learn More
    €45.82

  • NF ISO 965-1, E03-051 (11/2013)

    ISO general purpose metric screw threads - Tolerances - Part 1 : principles and basic data - Filetages métriques ISO pour usages généraux
    11/1/2013 - Paper - French - AFNOR
    Learn More
    €73.30

  • DIN EN ISO 15245-1:2013-11

    Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013); German version EN ISO 15245-1:2001 + A1:2013
    11/1/2013 - - - DIN
    Learn More
    From: €68.30

  • DIN 13-51:2013-10

    ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
    10/1/2013 - - - DIN
    Learn More
    From: €68.30

  • BS ISO 965-1:2013

    ISO general purpose metric screw threads. Tolerances Principles and basic data
    9/30/2013 - PDF - English - BSI
    Learn More
    €215.67

  • ISO 965-1:2013

    ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
    9/1/2013 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 965-1:2013

    ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
    9/1/2013 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 965-1:2013

    ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
    9/1/2013 - Paper - Russian - ISO
    Learn More
    €123.00

  • BS EN ISO 15245-1:2001+A1:2013

    Gas cylinders. Parallel threads for connection of valves to gas cylinders Specification
    8/31/2013 - PDF - English - BSI
    Learn More
    €154.05

  • JIS B 0101:2013

    Screw threads and fasteners - Vocabulary
    4/22/2013 - PDF - Japanese - JSA
    Learn More
    €55.77

  • JIS B 0217-1:2013

    ISO metric trapezoidal screw threads - Tolerances - Part 1: Principles and basic data
    4/22/2013 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0217-2:2013

    ISO metric trapezoidal screw threads - Tolerances - Part 2: Limits of sizes for external and internal screw thread
    4/22/2013 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0216-1:2013

    ISO metric trapezoidal screw threads - Part 1: Basic profiles and maximum material profiles
    4/22/2013 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0216-2:2013

    ISO metric trapezoidal screw threads - Part 2: General plan
    4/22/2013 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0216-3:2013

    ISO metric trapezoidal screw threads - Basic dimensions
    4/22/2013 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 0254/ERRATUM 1:2013

    ERRATUM
    4/5/2013 - - - JSA
    Learn More
    €0.00

  • DIN 78:2013-04

    Protrusions of bolt ends
    4/1/2013 - - - DIN
    Learn More
    From: €33.60

  • VG 85280:2013-02

    Thread W82 x 1/6 (left) For drinking water replenishment, DN 65; Text in German and English
    2/1/2013 - PDF - English, German - DIN
    Learn More
    €47.60

  • DIN EN ISO 4753:2012-02

    Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011); German version EN ISO 4753:2011
    2/1/2012 - - - DIN
    Learn More
    From: €47.60

  • BS EN ISO 4753:2011

    Fasteners. Ends of parts with external ISO metric thread
    11/30/2011 - PDF - English - BSI
    Learn More
    €154.05

  • NF EN ISO 2702, E25-650-1 (07/2011)

    Heat-treated steel tapping screws - Mechanical properties - Vis à tôle en acier traité thermiquement
    7/1/2011 - Paper - French - AFNOR
    Learn More
    €40.69

  • DIN 79012:2011-04

    Screw threads for bicycles and mopeds - Theoretical values, limiting screw thread dimensions
    4/1/2011 - PDF - German - DIN
    Learn More
    €40.80

  • DIN 6063-1:2011-04

    Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
    4/1/2011 - - - DIN
    Learn More
    From: €33.60

  • DIN 6063-2:2011-04

    Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
    4/1/2011 - - - DIN
    Learn More
    From: €33.60

  • JIS B 0254:2011 (R2015)

    Limit Gauges for Parallel Pipe Threads
    3/22/2011 - PDF - Japanese - JSA
    Learn More
    €55.77

  • JIS B 0254:2011

    Limit Gauges for Parallel Pipe Threads
    1/1/2011 - PDF - English - JSA
    Learn More
    €108.46

  • BS EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the Taper external and parallel internal threads. Dimensions, tolerances designation
    10/31/2010 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 965-3:1998

    ISO general purpose metric screw threads. Tolerances Deviations for constructional threads
    1/31/2010 - PDF - English - BSI
    Learn More
    €215.67

  • JIS B 0251/ERRATUM 1:2010

    ERRATUM
    1/12/2010 - - - JSA
    Learn More
    €0.00

  • DIN ISO 724:2010-01

    ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009)
    1/1/2010 - - - DIN
    Learn More
    From: €61.70

  • JIS B 0202/ERRATUM 1:2010

    ERRATUM
    1/1/2010 - - - JSA
    Learn More
    €0.00

  • JIS B 0212/ERRATUM 1:2009

    ERRATUM
    11/4/2009 - - - JSA
    Learn More
    €0.00

  • BS 919-3:2007

    Screw gauge limits and tolerances Specification for gauges screw threads of ISO metric form
    9/30/2009 - PDF - English - BSI
    Learn More
    €253.59

  • BS 919-4:2007

    Screw gauge limits and tolerances Limits of size for gauges screw threads unified form diameters 1/4 in larger
    9/30/2009 - PDF - English - BSI
    Learn More
    €300.99

  • BS 919-2:2007

    Screw gauge limits and tolerances Specification for gauges screw threads of Whitworth B.A. forms
    9/30/2009 - PDF - English - BSI
    Learn More
    €253.59

  • BS 919-1:2007

    Screw gauge limits and tolerances Specification for gauges screw threads of unified form
    9/30/2009 - PDF - English - BSI
    Learn More
    €300.99

  • BS 3643-1:2007

    ISO metric screw threads Principles and basic data
    8/31/2009 - PDF - English - BSI
    Learn More
    €324.69

  • BS 1580-1:2007

    Unified screw threads Screw with diameters ¼ in and larger. Requirements
    8/31/2009 - PDF - English - BSI
    Learn More
    €346.02

  • NF ISO 5408, E03-000 (08/2009)

    Screw threads - Vocabulary - Filetages
    8/1/2009 - Paper - English, French - AFNOR
    Learn More
    €91.50

  • BS ISO 5408:2009

    Screw threads. Vocabulary
    7/31/2009 - PDF - English - BSI
    Learn More
    €300.99

  • ISO 724:1993/Cor 1:2009

    ISO general-purpose metric screw threads — Basic dimensions — Technical Corrigendum 1
    7/1/2009 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 965-3:1998/Cor 1:2009

    ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads — Technical Corrigendum 1
    7/1/2009 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 724:1993/Cor 1:2009

    ISO general-purpose metric screw threads — Basic dimensions — Technical Corrigendum 1
    7/1/2009 - Paper - French - ISO
    Learn More
    €0.00

  • ISO 965-3:1998/Cor 1:2009

    ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads — Technical Corrigendum 1
    7/1/2009 - Paper - French - ISO
    Learn More
    €0.00

  • NF ISO 1501, E03-500 (07/2009)

    ISO miniature screw threads
    7/1/2009 - Paper - French - AFNOR
    Learn More
    €64.01

  • BS ISO 725:2009

    ISO inch screw threads. Basic dimensions
    6/30/2009 - PDF - English - BSI
    Learn More
    €215.67

  • UNE-EN ISO 1179-3:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
    5/13/2009 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 1179-3:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
    5/13/2009 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN ISO 1179-4:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
    5/13/2009 - PDF - Spanish - AENOR
    Learn More
    €49.00

  • UNE-EN ISO 1179-4:2009

    Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
    5/13/2009 - PDF - English - AENOR
    Learn More
    €58.00

  • ISO 1501:2009

    ISO miniature screw threads
    5/1/2009 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 1501:2009

    ISO miniature screw threads
    5/1/2009 - Paper - French - ISO
    Learn More
    €92.00

  • JIS B 1006:2009 (R2014)

    Fasteners - Thread run-outs for external thread in accordance with ISO general purpose metric screw threads
    4/20/2009 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 1018:2009 (R2014)

    Fasteners - Thread undercuts for external metric ISO threads
    4/20/2009 - PDF - Japanese - JSA
    Learn More
    €32.50

  • ISO 725:2009

    ISO inch screw threads — Basic dimensions
    4/1/2009 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 725:2009

    ISO inch screw threads — Basic dimensions
    4/1/2009 - Paper - French - ISO
    Learn More
    €92.00

  • JIS B 1082:2009 (R2013)

    Stress area and bearing area for threaded fasteners
    3/20/2009 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 1116:2009 (R2013)

    Slotted head screws for precision instruments
    3/20/2009 - PDF - Japanese - JSA
    Learn More
    €32.50

  • JIS B 1116:2009

    Slotted head screws for precision instruments
    1/1/2009 - PDF - English - JSA
    Learn More
    €45.82

  • JIS B 1082:2009

    Stress area and bearing area for threaded fasteners
    1/1/2009 - PDF - English - JSA
    Learn More
    €54.23

  • JIS B 1006:2009

    Fasteners -- Thread run-outs for external thread in accordance with ISO general purpose metric screw threads
    1/1/2009 - PDF - English - JSA
    Learn More
    €36.47

  • BS 8498:2008

    British Standards for screw threads and screw gauges. Introduction and guidance
    12/31/2008 - PDF - English - BSI
    Learn More
    €215.67

  • BS 7752-1:1994+A1:2008

    Free running type wire thread inserts Specification for ISO metric coarse pitch threads
    9/30/2008 - PDF - English - BSI
    Learn More
    €154.05

  • BS 93:2008

    British Association (B.A.) screw threads. Requirements
    9/30/2008 - PDF - English - BSI
    Learn More
    €215.67

  • UNE-EN 60423:2008

    Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
    4/23/2008 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 60423:2008

    Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings.
    4/23/2008 - PDF - English - AENOR
    Learn More
    €62.00

  • JIS B 0251:2008 (R2017)

    Limit gauges for metric screw threads
    3/20/2008 - PDF - Japanese - JSA
    Learn More
    €62.66

  • JIS B 0255/AMENDMENT 1:2008 (R2017)

    Limit gauges for unified screw threads (Amendment 1)
    3/20/2008 - PDF - Japanese - JSA
    Learn More
    €25.00

  • AS ISO 7.2:2008

    Pipe threads where pressure-tight joints are made on the threads Verification by means of limit gauges
    1/1/2008 - PDF sécurisé - English - SA
    Learn More
    €126.55

  • AS ISO 7.1:2008

    Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation
    1/1/2008 - PDF sécurisé - English - SA
    Learn More
    €78.34

  • BS 1580-3:2007

    Unified screw threads Screw with diameters below ¼ in. Requirements
    12/31/2007 - PDF - English - BSI
    Learn More
    €215.67

  • BS 84:2007

    Parallel screw threads of Whitworth form. Requirements
    11/30/2007 - PDF - English - BSI
    Learn More
    €300.99

  • ISO 7-1:1994/Cor 1:2007

    Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation — Technical Corrigendum 1
    8/1/2007 - Paper - English - ISO
    Learn More
    €0.00

  • ISO 7-1:1994/Cor 1:2007

    Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation — Technical Corrigendum 1
    8/1/2007 - Paper - French - ISO
    Learn More
    €0.00

  • VDI/VDE/DGQ 2618 Blatt 4.2:2007-07 (R2015)

    Inspection of measuring and test equipment - Test instruction for cylindrical measuring pins/pins for screw threads
    7/1/2007 - PDF - English, German - VDI
    Learn More
    €94.38

  • NF E03-612 (04/2007)

    Asymmetrical trapezoidal screw thread, artillery type, 3° - 45° - Checking by limit gauges - Filetage trapézoïdal asymétrique d'angles 3°et 45°, 'dit artillerie'
    4/1/2007 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF E03-619 (04/2007)

    ISO metric trapezoidal screw threads - Checking by limit gauges - Filetages métriques trapézoïdaux ISO
    4/1/2007 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF E03-611 (04/2007)

    Asymmetrical trapezoidal screw thread, artillery type, 3° - 45° - Basic profile - Dimensions and tolerances - Filetage trapézoïdal asymétrique d'angles 3° et 45°, 'dit artillerie'
    4/1/2007 - Paper - French - AFNOR
    Learn More
    €64.01

  • JIS B 3102/ERRATUM 1:2007

    ERRATUM
    1/15/2007 - - - JSA
    Learn More
    €0.00

  • BS 7751-1:1994

    Prevailing torque type wire thread inserts Specification for ISO metric coarse pitch threads
    10/31/2006 - PDF - English - BSI
    Learn More
    €154.05

  • BS 7751-2:1994

    Prevailing torque type wire thread inserts Specification for ISO metric fine pitch threads
    10/31/2006 - PDF - English - BSI
    Learn More
    €130.35

  • FD E03-002 (09/2006)

    Screw threads - General sight over standardization of mechanical engineering - Filetages
    9/1/2006 - Paper - French - AFNOR
    Learn More
    €29.39

  • FD E03-003 (09/2006)

    Screw threads - References of main standardized foreign screw threads - Filetages
    9/1/2006 - Paper - French - AFNOR
    Learn More
    €21.90

  • VDI/VDE/DGQ 2618 Blatt 4.8:2006-04 (R2015)

    Inspection of measuring and test equipment - Test instruction for zylindrical screw setting play gauges and screw check plugs
    4/1/2006 - PDF - English, German - VDI
    Learn More
    €83.07

  • VDI/VDE/DGQ 2618 Blatt 4.9:2006-04 (R2015)

    Inspection of measuring and test equipment - Test instruction for cylindrical screw setting ring gauges, screw ring gauges
    4/1/2006 - PDF - English, German - VDI
    Learn More
    €83.07

  • UNE-EN 10226-3:2005 (R2014)

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    12/21/2005 - PDF - Spanish - AENOR
    Learn More
    €63.00

  • UNE-EN 10226-3:2005 (R2014)

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    12/21/2005 - PDF - English - AENOR
    Learn More
    €75.00

  • NF EN 10226-2, E03-004-2 (12/2005)

    Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation
    12/1/2005 - Paper - French - AFNOR
    Learn More
    €64.01

  • UNE-EN 10226-2:2005 (R2019)

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    11/16/2005 - PDF - Spanish - AENOR
    Learn More
    €51.00

  • UNE-EN 10226-2:2005 (R2019)

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    11/16/2005 - PDF - English - AENOR
    Learn More
    €61.00

  • DIN EN 10226-2:2005-11

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
    11/1/2005 - - - DIN
    Learn More
    From: €68.30

  • NBN EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    9/30/2005 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    9/30/2005 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 10226-2:2005

    Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
    9/30/2005 - PDF - French - NBN
    Learn More
    €45.00

  • NF ISO 1502, E03-150 (08/2005)

    ISO general-purpose metric screw threads - Gauges and gauging - Filetages métriques ISO pour usages généraux
    8/1/2005 - Paper - French - AFNOR
    Learn More
    €84.02

  • DIN 13-21:2005-08

    ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm
    8/1/2005 - - - DIN
    Learn More
    From: €82.60

  • DIN 13-22:2005-08

    ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm
    8/1/2005 - - - DIN
    Learn More
    From: €82.60

  • DIN 13-23:2005-08

    ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm
    8/1/2005 - - - DIN
    Learn More
    From: €82.60

  • DIN 13-24:2005-08

    ISO general purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm
    8/1/2005 - - - DIN
    Learn More
    From: €82.60

  • DIN 13-25:2005-08

    ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm
    8/1/2005 - - - DIN
    Learn More
    From: €75.40

  • DIN 13-26:2005-08

    ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
    8/1/2005 - - - DIN
    Learn More
    From: €82.60

  • DIN 8140-2:2005-08

    Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances
    8/1/2005 - - - DIN
    Learn More
    From: €50.30

  • DIN 3858:2005-08

    Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
    8/1/2005 - - - DIN
    Learn More
    From: €54.80

  • NF EN 10226-3, E03-004-3 (07/2005)

    Pipe threads where pressure tight joints are made on the threads - Part 3 : verification by means of limit gauges
    7/1/2005 - Paper - French - AFNOR
    Learn More
    €91.50

  • DIN EN 10226-3:2005-05

    Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
    5/1/2005 - - - DIN
    Learn More
    From: €108.80

  • NBN EN 10226-3:2005

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    4/1/2005 - PDF - German - NBN
    Learn More
    €77.00

  • NBN EN 10226-3:2005

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    4/1/2005 - PDF - English - NBN
    Learn More
    €77.00

  • NBN EN 10226-3:2005

    Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    4/1/2005 - PDF - French - NBN
    Learn More
    €77.00

  • UNE 17703:2004

    ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.
    12/31/2004 - PDF - Spanish - AENOR
    Learn More
    €20.00

  • UNE-EN 10226-1:2004 (R2019)

    Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
    12/17/2004 - PDF - Spanish - AENOR
    Learn More
    €52.00

  • UNE-EN 10226-1:2004 (R2019)

    Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
    12/17/2004 - PDF - English - AENOR
    Learn More
    €62.00

  • DIN 20401:2004-12

    Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
    12/1/2004 - PDF - German - DIN
    Learn More
    €40.80

  • NF EN 10226-1, E03-004-1 (11/2004)

    Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation
    11/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 965-4, E03-055 (10/2004)

    ISO general purpose metric screw threads - Tolerances - Part 4 : limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing - Filetages métriques ISO pour usages généraux
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 965-5, E03-057 (10/2004)

    ISO general purpose metric screw threads - Tolerances - Part 5 : limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing - Filetages métriques ISO pour usages généraux
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 724, E03-049 (10/2004)

    ISO general-purpose metric screw threads - Basic dimensions - Filetages métriques ISO pour usages généraux
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 2904, E03-622 (10/2004)

    ISO metric trapezoidal screw threads - Basic dimensions - Filetages métriques trapézoïdaux ISO
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • NF ISO 68-2, E03-006 (10/2004)

    ISO general purpose screw threads - Basic profile - Part 2 : inch screw threads - Filetages ISO pour usages généraux
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €40.69

  • NF ISO 263, E03-015 (10/2004)

    ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6 in - Filetages ISO en inches
    10/1/2004 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN EN 10226-1:2004-10

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
    10/1/2004 - - - DIN
    Learn More
    From: €68.30

  • ASME B1.1-2003 (R2018)

    Unified Inch Screw Threads, (UN and UNR Thread Form)
    9/30/2004 - PDF DRM - English - ASME
    Learn More
    €150.40

  • NF ISO 5864, E03-200 (09/2004)

    ISO inch screw threads - Allowances and tolerances - Filetages ISO en inches
    9/1/2004 - Paper - French - AFNOR
    Learn More
    €73.30

  • NBN EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    8/31/2004 - PDF - German - NBN
    Learn More
    €45.00

  • NBN EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    8/31/2004 - PDF - English - NBN
    Learn More
    €45.00

  • NBN EN 10226-1:2004

    Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    8/31/2004 - PDF - French - NBN
    Learn More
    €45.00

  • UNE 17709:2004 ERRATUM

    ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
    3/26/2004 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • JIS B 0261:2004 (R2013)

    Parallel screw thread gauges - Measuring method of gauges
    2/20/2004 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0253/ERRATUM 1:2004

    ERRATUM
    1/1/2004 - - - JSA
    Learn More
    €0.00

  • XP E03-110 (12/2003)

    Geometrical product specification (GPS) - Screw threads - Direct measuring methods - Spécification géométrique des produits (GPS)
    12/1/2003 - Paper - French - AFNOR
    Learn More
    €122.38

  • NF EN ISO 228-2, E03-005-2 (11/2003)

    Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges
    11/1/2003 - Paper - French - AFNOR
    Learn More
    €73.30

  • UNE-EN ISO 228-1:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    9/26/2003 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN ISO 228-1:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    9/26/2003 - PDF - English - AENOR
    Learn More
    €56.00

  • UNE-EN ISO 228-2:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    9/26/2003 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN ISO 228-2:2003 (R2010)

    Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    9/26/2003 - PDF - English - AENOR
    Learn More
    €64.00

  • NF EN ISO 228-1, E03-005-1 (06/2003)

    Pipe threads where pressure-tight joints are not made on the threads - Part 1 : dimensions, tolerances and designation
    6/1/2003 - Paper - French - AFNOR
    Learn More
    €64.01

  • DIN 263-3:2003-06

    Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
    6/1/2003 - PDF - German - DIN
    Learn More
    €40.80

Items 1 to 200 of 479 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3