21 : Mechanical systems and components for general use
-
€89.00
-
€89.00
-
€22.99
-
BS 1083:1965
Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
8/20/1965 - PDF - English -
Learn More€250.00 -
NF L31-212 (06/1965)
Airframe bearings. Rigid ball bearings for average loads. (rech.). Dimensions and loads.
6/1/1965 - Paper - French -
Learn More€25.67 -
€25.50
-
NBN 651:1965
Engrenages - Modules et diametral pitches normaux des engrenages cylindriques de mécanique générale |Tandwielen - Normale moduli en diametral pitches van cilindrische tandwielen voor algemene werktuigkunde
4/1/1965 - PDF - French, Dutch -
Learn More€37.00 -
UNE 25190:1964
SELECTIVE LIST OF LONG BOLT OF COUNTERSUNK AND SNAP POINT HEAD, SLOTTED, FOR ANY MATERIAL ORDINARY USE, WITH SUPERFICIAL PROTECTION OR WITHOUT (3-5 MM DIAMETERS, 10-16 MM LENGTHS AND 90º ANGLE).
12/15/1964 - PDF - Spanish -
Learn More€14.00 -
UNE 25189:1964
SELECTIVE LIST OF LONG BOLT OF COUNTER SUNK AND FLATHEAD SLOTTED, FOR ANY MATERIAL ORDINARY USE, WITH SUPERFICIAL PROTECTION OR WITHOUT IT (2-8 MM DIAMETERS, 10-80 MM LENGTHS AND 90º ANGLE).
12/15/1964 - PDF - Spanish -
Learn More€14.00 -
UNE 18103:1964
STRAIGHT GEARS. CUTTING TOOLS. CUTTING KNIFE-SPIN PINION. DIMENSIONS.
3/15/1964 - PDF - Spanish -
Learn More€17.00 -
BS 3580:1964
Guide to design considerations on the strength of screw threads
2/28/1964 - PDF - English -
Learn More€250.00 -
€25.67
-
UNE 18121:1963
FLAT CONVEYORS COMPOSED OF RUBBER AND CLOTH. LOAD DETERMINATION AND ELONGATION TO THE RUPTURE OF EVERY CLOTH WHICH FORM THE CONVEYOR.
12/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 18122:1963
FLAT CONVEYORS COMPOSED OF RUBBER AND CLOTH. LOAD DETERMINATION AND ELONGATION TO THE RUPTURE OF THE CLOTHS PACKAGE.
12/15/1963 - PDF - Spanish -
Learn More€14.00 -
BS 1768:1963 (R2013)
Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads). Normal series
9/17/1963 - PDF - English -
Learn More€293.00 -
MS 21279B:1963 + A1:1996, IN1:1999 & VN2:2018
BOLT, MACHINE - STEEL, DOUBLE HEXAGON, EXTENDED WASHER, .190-32 (MIL-S-8879) (ASG) // Inactive for new design
9/17/1963 - PDF sécurisé - English -
Learn More€22.00 -
€28.60
-
€22.99
-
UNE 25171:1963
SELECTIVE LIST FLATHEAD CYLINDRICAL FLATHEAD, CYLINDRICAL ROUNDHEAD SCREWS, FOR METAL WITH SUPERFICIAL PROTECTION OR WITHOUT IT.
5/15/1963 - PDF - Spanish -
Learn More€14.00 -
€331.00
-
NF L31-241 (04/1963) (R2008)
Precision bearings for instruments (rech.). Recommended dimensions.
4/1/1963 - Paper - French -
Learn More€25.50 -
€14.00
-
UNE 18123:1963
FLAT CONVEYORS COMPOSED OF RUBBER AND CLOTH. ADHERENCE TEST AMONG THE CLOTHS.
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 25161:1963
SELECTIVE LIST OF THE HOLE DIAMETERS FOR STEEL RIVET SETTING (2-20 MM DIAMETERS).
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 25163:1963
SELECTIVE LIST OF THE DIAMETERS OF SCREWS CLEARANCE HOLES (4-24 MM).
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 18119:1963
FLAT CONVEYORS COMPOSED OF RUBBER AND CLOTH. CHARACTERISTICS AND TOLERANCES.
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 25162:1963
SELECTIVE LIST OF THE MEASURES OF ROUNDHEAD STEEL RIVET FOR ANOTHER USE THAN THE BOILER FORGE.
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 25164:1963
SELECTIVE LIST OF THE MEASURES OF HEXAGONAL HEAD SCREWS (RUGGED OR WITH SUPERFICIAL PROTECTION).
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
UNE 18120:1963
FLAT CONVEYORS COMPOSED OF RUBBER AND CLOTH. CHARACTERISTICS OF THE MATERIALS THAT FORM THE CONVEYORS.
1/15/1963 - PDF - Spanish -
Learn More€14.00 -
€14.00
-
€250.00
-
€14.00
-
UNE 25165:1962
SELECTIVE LIST OF ROUNDHEAD SCREWS WITH SET BOLT (RUGGED OR WITH SUPERFICIAL PROTECTION).
7/15/1962 - PDF - Spanish -
Learn More€14.00 -
€17.00
-
€22.99
-
€14.00
-
€49.00
-
BS 3410:1961
Specification for metal washers for general engineering purposes
9/1/1961 - PDF - English -
Learn More€180.00 -
€151.00
-
BS 2062-2:1960
Specification for gear hobs Hobs gears turbine reduction and similar drives
12/23/1960 - PDF - English -
Learn More€180.00 -
€25.67
-
€49.00
-
€17.00
-
BS 2062-1:1959
Specification for gear hobs Hobs general purposes, 1 d.p. to 20 inclusive
12/18/1959 - PDF - English -
Learn More€180.00 -
€17.00
-
€25.67
-
€25.50
-
€14.00
-
BS 978-2:Addendum No. 1:1959
Gears for instruments and clockwork mechanisms. Cycloidal type gears. Double circular arc gears
5/15/1959 - PDF - English -
Learn More€151.00 -
UNE 18073:1959
LUBRICATION GROVEES. GROOVE WIDTH FOR LUBRICATING RINGS, IN THE BEARING SLEEVES.
5/15/1959 - PDF - Spanish -
Learn More€14.00 -
€17.00
-
€23.00
-
€25.67
-
€25.67
-
€151.00
-
€14.00
-
BS 450:1958
Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
6/30/1958 - PDF - English -
Learn More€331.00 -
€27.00
-
€25.67
-
€25.67
-
DIN 48323:1957-11
Telecommunication and power current overhead lines, turnbuckle for stay ropes
11/1/1957 - PDF - German -
Learn More€22.99 -
BS 2059/3:1957 - SET (R2017)
Summary sheet: straight sided serrations. Internal and external
8/15/1957 - PDF - English -
Learn More€180.00 -
BS 2059/1:1957 - SET (R2017)
Summary sheet: straight sided splines. Bottom fitting. Shallow
8/15/1957 - PDF - English -
Learn More€180.00 -
€180.00
-
€14.00
-
€14.00
-
€14.00
-
€14.00
-
€17.00
-
€293.00
-
BS 2827:1957
Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
2/8/1957 - PDF - English -
Learn More€151.00 -
€25.67
-
NF L05-210 (10/1956) (R2011)
Screw thread tolerances. Selection for aircraft industry (rech.).
10/1/1956 - Paper - French -
Learn More€25.50 -
DIN 6883:1956-02
Taper Key Torque Transmission, Parallel Keys, Dimensions and Application
2/1/1956 - PDF - English -
Learn More€28.60 -
DIN 6881:1956-02
Taper Key Torque Transmission, Saddle Keys, Dimensions and Application
2/1/1956 - PDF - English -
Learn More€28.60 -
DIN 6889:1956-02
Taper Key Torque Transmission, Gib-head Saddle Keys, Dimensions and Application
2/1/1956 - PDF - English -
Learn More€28.60 -
DIN 6884:1956-02
Taper Key Torque Transmission, Gib-head Parallel Keys, Dimensions and Application
2/1/1956 - PDF - German -
Learn More€22.99 -
DIN 6883:1956-02
Taper Key Torque Transmission, Parallel Keys, Dimensions and Application
2/1/1956 - PDF - German -
Learn More€22.99 -
DIN 6881:1956-02
Taper Key Torque Transmission, Saddle Keys, Dimensions and Application
2/1/1956 - PDF - German -
Learn More€22.99 -
DIN 6884:1956-02
Taper Key Torque Transmission, Gib-head Parallel Keys, Dimensions and Application
2/1/1956 - PDF - English -
Learn More€28.60 -
DIN 6889:1956-02
Taper Key Torque Transmission, Gib-head Saddle Keys, Dimensions and Application
2/1/1956 - PDF - German -
Learn More€22.99 -
€180.00
-
€99.33
-
€25.67
-
UNE 25077:1955 (R2009)
TOLERANCES OF MOUNTED SPRINGS OF LEAF SPRING FOR RAILWAY MATERIAL. COLD OR HOT CLAMPED SPRINGS.
4/15/1955 - PDF - Spanish -
Learn More€14.00 -
€25.50
-
UNE 25041:1955
DRAW AND BUFFER SPRING FOR RAILWAY MATERIAL OF NARROW TRACK GANGE.
2/15/1955 - PDF - Spanish -
Learn More€14.00 -
UNE 25082:1955 (R2009)
LEAF SPRINGS FOR RAILWAY MATERIAL. COLD OR HOT CLAMPED SPRINGS. CANDLES, ABUTMENTS, HOLDERS AND HAND SPRING RIGGING GEAR. ERECTION JETS.
2/15/1955 - PDF - Spanish -
Learn More€14.00 -
€25.67
-
€25.67
-
BS 2518-1:1954
Specification for rotary form relieved gear cutters Diametral pitch
11/9/1954 - PDF - English -
Learn More€293.00 -
UNE 25078:1954 (R2009)
TOLERANCES FOR SPRING PLATE OF LEAF SPRING FOR RAILWAY MATERIAL.
9/15/1954 - PDF - Spanish -
Learn More€14.00 -
DIN 3780:1954-09
Seals and Packings, Stuffing Box Diameters and Related Packing Widths, Design Sheet
9/1/1954 - PDF - English -
Learn More€28.60 -
DIN 3780:1954-09
Seals and Packings, Stuffing Box Diameters and Related Packing Widths, Design Sheet
9/1/1954 - PDF - French -
Learn More€28.60 -
€25.50
-
€25.50
-
€25.67
-
€348.00
-
BS 2061:1953 (R2012)
Specification for phosphor bronze spring washers for general engineering purposes
12/8/1953 - PDF - English -
Learn More€151.00 -
€14.00
-
€14.00
-
NF L34-420 (03/1953) (R2008)
Flexible shafts for controlling tachometers, propellor regulators, etc (rech.).
3/1/1953 - Paper - French -
Learn More€25.67 -
€25.50
-
€180.00
-
€25.67
-
€25.67
-
€25.67
-
€25.67
-
NF E27-155 (11/1952) (R2012)
Rivet tolerances for mechanical, metal and boiler construction.
11/1/1952 - Paper - French -
Learn More€25.67 -
€14.00
-
€14.00
-
€14.00
-
DIN 3972:1952-02
Reference Profiles of Gear-cutting Tools for Involute Tooth Systems according to DIN 867
2/1/1952 - PDF - French -
Learn More€28.60 -
DIN 3972:1952-02
Reference Profiles of Gear-cutting Tools for Involute Tooth Systems according to DIN 867
2/1/1952 - PDF - English -
Learn More€28.60 -
€151.00
-
€151.00
-
BS 46-3:1951
Keys and keyways taper pins Specification for solid split general engineering purposes
12/20/1951 - PDF - English -
Learn More€151.00 -
BS 1802:1951
Specification for steel spring washers for general engineering and automobile purposes
11/26/1951 - PDF - English -
Learn More€151.00 -
€25.50
-
BS 1769:1951
Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF threads). Heavy series
9/24/1951 - PDF - English -
Learn More€180.00 -
NF L32-611 (06/1951) (R2011)
Calculation method for symmetrical radial serrations, according to NF L 32-610
6/1/1951 - Paper - French -
Learn More€25.50 -
€180.00
-
€25.50
-
€250.00
-
BS 811:1950
Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
5/24/1950 - PDF - English -
Learn More€250.00 -
€180.00
-
€25.67
-
€25.50
-
€25.50
-
€25.50
-
€76.85
-
€76.85
-
UNE-EN IEC 62506:2023
Methods for product accelerated testing (Endorsed by Asociación Española de Normalización in January of 2024.)
4/23/2024 - PDF - English -
Learn More€131.00 -
€61.25