21 : Mechanical systems and components for general use
-
DIN 3990-2:1987-12
Calculation of load capacity cylindrical gears, calculation of pitting resistance
12/1/1987 - PDF - English - DIN
Learn More€79.63 -
DIN 3990-4:1987-12
Calculation of load capacity of cylindrical gears, calculation of scuffing load capacity
12/1/1987 - PDF - English - DIN
Learn More€85.79 -
DIN 3990-5:1987-12
Calculation of load capacity of cylindrical gears, endurance limits and material qualities
12/1/1987 - PDF - English - DIN
Learn More€79.63 -
NF E22-175 (11/1987) (R2012)
Keying. Assembly by means of parrallel keys. Dimensions.
11/1/1987 - Paper - French - AFNOR
Learn More€48.00 -
NF E22-176 (11/1987) (R2012)
Keying. Forced assembly by means of taper keys. Dimensions.
11/1/1987 - Paper - French - AFNOR
Learn More€48.00 -
€34.67
-
€34.67
-
€32.34
-
€32.34
-
VDI 2235:1987-10
Economical decisions during design engineering process, methods and equipment
10/1/1987 - PDF - German - VDI
Learn More€134.50 -
€25.00
-
UNE 28622:1987
BEARINGS-AIRFRAME ROLLING RIGID , SINGLE ROW BALL BEARINGS IN STEEL DIAMETER SERIES 8 AND 9. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28623:1987
BEARINGS-AIRFRAME ROLLING RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL DIAMETER SERIES 8 AND 9. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28624:1987
BEARINGS-AIRFRAME ROLLING RIGID, SINGLE ROW BALL BEARINGS IN STEEL DIAMETER SERIES 0 AND 2. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28625:1987
BEARINGS-AIRFRAME ROLLING RIGID SINGLE ROW, BALL BEARINGS IN CORROSIONRESISTING STEEL DIAMETER SERIES 0 AND 2. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28626:1987
BEARINGS-AIRFRAME ROLLING DOUBLE ROW, SELF ALIGNING BALL BEARINGS IN STEEL DIAMETER SERIES 2. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28627:1987
BEARINGS-AIRFRAME ROLLING DOUBLE ROW, SELF ALIGNING BALL BEARINGS IN CORROSION RESISTING STEEL DIAMETER SERIES 2. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28628:1987
BEARINGS-AIRFRAME ROLLING SINGLE ROW SELF ALIGNING ROLLER BEARINGS IN STEEL DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28628:1987
BEARINGS-AIRFRAME ROLLING SINGLE ROW SELF ALIGNING ROLLER BEARINGS IN STEEL DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - English - AENOR
Learn More€58.80 -
UNE 28629:1987
BEARINGS-AIRFRAME ROLLING SINGLE ROW SELF ALIGNING ROLLER BEARINGS IN CORROSION RESISTING STEEL DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE 28629:1987
BEARINGS-AIRFRAME ROLLING SINGLE ROW SELF ALIGNING ROLLER BEARINGS IN CORROSION RESISTING STEEL DIAMETER SERIES 3 AND 4. DIMENSIONS AND LOADS. AEROSPACE SERIES.
10/1/1987 - PDF - English - AENOR
Learn More€58.80 -
€32.50
-
€37.00
-
€37.00
-
€58.00
-
€58.00
-
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
8/20/1987 - Paper - French - ISO
Learn More€110.00 -
ISO 228-2:1987 (R2022)
Pipe threads where pressure-tight joints are not made on the threads
Part 2: Verification by means of limit gauges
8/20/1987 - Paper - English - ISO
Learn More€110.00 -
€32.50
-
VDI/VDE 2258:1987-07 (R2001)
Precision engineering components, mechanical operating elements
7/1/1987 - PDF - German - VDI
Learn More€90.75 -
DIN 28135:1987-05
Axial thrust washers for flange couplings of vertical shaft for agitators
5/1/1987 - PDF - German - DIN
Learn More€39.35 -
DIN 43718:1987-05
Measurement and control; front-frames and frontpanels of measurement and control equipment; principal dimensions
5/1/1987 - PDF - German - DIN
Learn More€32.34 -
DIN 4000-56:1987-04
Tabular layouts of article characteristics for switches and switching devices up to AC 1000 V and DC 1200 V
4/1/1987 - PDF - German - DIN
Learn More€65.89 -
€39.35
-
€49.16
-
€348.00
-
NBN E 26-003:1986
Steel roller chains, type S, attachments and chain wheels
3/21/1987 - PDF - French, Dutch - NBN
Learn More€58.00 -
€0.00
-
DIN 9835-1 Beiblatt 1:1987-03
Elastomer pressure springs for press tools; spring characteristics
3/1/1987 - PDF - German - DIN
Learn More€65.89 -
BS 6710:1987
Specification for dimensions of chain wheel tooth forming tools
2/27/1987 - PDF - English - BSI
Learn More€151.00 -
DIN 14-1:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; basic profile
2/1/1987 - PDF - German - DIN
Learn More€39.35 -
DIN 14-2:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
2/1/1987 - PDF - German - DIN
Learn More€39.35 -
DIN 14-3:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
2/1/1987 - PDF - German - DIN
Learn More€39.35 -
DIN 14-4:1987-02
ISO-metric screw thread; screw threads below 1 mm diameter; limits
2/1/1987 - PDF - German - DIN
Learn More€39.35 -
NBN E 24-016:1986
Narrow V-belt drives for the automotive industry - Fatigue test
1/9/1987 - PDF - French, Dutch - NBN
Learn More€58.00 -
DIN 7719-2:1987-01
Endless wide V-belts for industrial speed changers; measurement of centre distance variations
1/1/1987 - PDF - German - DIN
Learn More€32.34 -
ASME B18.18.1M-1987 (R1999) (R2006)
Inspection and Quality Assurance for General Purpose Fasteners
1/1/1987 - PDF DRM - English - ASME
Learn More€33.00 -
€162.00
-
€58.00
-
DIN 4000-14:1986-12
Tabular layouts of article characteristics for cable sockets, plugs and cable splices
12/1/1986 - PDF - German - DIN
Learn More€45.98 -
NF E22-610 (12/1986) (R2011)
Mechanical transmissions. Coupling devices. Classification. Terminology. Graphical symbols.
12/1/1986 - Paper - French - AFNOR
Learn More€48.00 -
DIN ISO 14:1986-12
Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982
12/1/1986 - PDF - German - DIN
Learn More€72.80 -
€48.00
-
€48.00
-
€48.00
-
UNE 68054:1986 (R2021)
EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTION THREADING
11/15/1986 - PDF - Spanish - AENOR
Learn More€14.00 -
€48.00
-
€48.00
-
ISO 8736:1986 (R2022)
Taper pins with internal thread, unhardened
General information
11/6/1986 - Paper - French - ISO
Learn More€48.00 -
ISO 8737:1986 (R2022)
Taper pins with external thread, unhardened
General information
11/6/1986 - Paper - French - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
ISO 8736:1986 (R2022)
Taper pins with internal thread, unhardened
General information
11/6/1986 - Paper - English - ISO
Learn More€48.00 -
ISO 8737:1986 (R2022)
Taper pins with external thread, unhardened
General information
11/6/1986 - Paper - English - ISO
Learn More€48.00 -
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
€48.00
-
E25-034 (10/1986) (R2011)
Fasteners with tightening washer. Combination guide for washer-screw and washer-nut.
10/1/1986 - Paper - French - AFNOR
Learn More€48.00 -
BS 5686:1986
Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
8/29/1986 - PDF - English - BSI
Learn More€180.00 -
DIN 740-1:1986-08
Power transmission engineering; flexible shaft couplings; technical delivery conditions
8/1/1986 - PDF - German - DIN
Learn More€72.80 -
DIN 740-1:1986-08
Power transmission engineering; flexible shaft couplings; technical delivery conditions
8/1/1986 - PDF - English - DIN
Learn More€91.12 -
DIN 740-2:1986-08
Power transmission engineering; flexible shaft couplings; parameters and design principles
8/1/1986 - PDF - German - DIN
Learn More€59.63 -
DIN 740-2:1986-08
Power transmission engineering; flexible shaft couplings; parameters and design principles
8/1/1986 - PDF - English - DIN
Learn More€74.58 -
€45.98
-
DIN 31670-8:1986-07
Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
7/1/1986 - PDF - German - DIN
Learn More€32.34 -
DIN 31670-8:1986-07
Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
7/1/1986 - PDF - English - DIN
Learn More€40.56 -
NF F03-003 (07/1986) (R2011)
Rolling stock - Notched head wood screws - Symbols F, FB and R
7/1/1986 - Paper - French - AFNOR
Learn More€34.67 -
€45.98
-
€32.34
-
UNE 26120:1986
BUSHES FOR AUTOMOTIVE INDUSTRI MADE BY SELFLUBRICATIN SINTERED METALS. DIMENSIONAL CONTROL.
4/15/1986 - PDF - Spanish - AENOR
Learn More€17.00 -
UNE 18091:1986 ERRATUM
NEEDLE ROLLER BEARINGS. LIGHT AND MEDIUM SERIES. DIMENSIONS AND TOLERANCES.
4/15/1986 - PDF - Spanish - AENOR
Learn More€0.00 -
€0.00
-
€75.67
-
NF E22-131 (04/1986) (R2011)
Straight-sided splines for cylindrical shafts with internal centering. Dimensions, tolerance and verification.
4/1/1986 - Paper - French - AFNOR
Learn More€75.67 -
NF E90-601 (04/1986) (R2006)
Mechanical vibration and shock. Balancing machines. Description and evaluation.
4/1/1986 - Paper - French - AFNOR
Learn More€99.33 -
NBN E 03-004:1986
ISO metric triangular screw threads - Limit dimensions and tolerances
3/14/1986 - PDF - French, Dutch - NBN
Learn More€121.00 -
E25-032 (03/1986) (R2011)
Fasteners. Coatings (and surface treatments) for protection against corrosion. Comparative presentment.
3/1/1986 - Paper - French - AFNOR
Learn More€60.67 -
DIN 7753-3:1986-02
Endless narrow V-belts for the automotive industry; dimensions of belts and pulley groove profiles
2/1/1986 - PDF - German - DIN
Learn More€39.35 -
DIN 7753-3:1986-02
Endless narrow V-belts for the automotive industry; dimensions of belts and pulley groove profiles
2/1/1986 - PDF - English - DIN
Learn More€49.16 -
€39.35
-
DIN 867:1986-02
Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering
2/1/1986 - PDF - German - DIN
Learn More€32.34 -
DIN 867:1986-02
Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering
2/1/1986 - PDF - English - DIN
Learn More€40.56 -
UIC 583:1986-01
Wagons - Application of a special mark on interchangeable parts
1/1/1986 - PDF - English - UIC
Learn More€41.00 -
E22-142 (01/1986) (R2011)
Straight cylindrical involute splines. Pressure angle 20 degrees. Inspection with limit gauges.
1/1/1986 - Paper - French - AFNOR
Learn More€48.00 -
€27.00
-
€32.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
€34.50
-
DIN 7719-1:1985-10
Endless wide V-belts for industrial speed changers; V-belts and groove profiles for corresponding pulleys
10/1/1985 - PDF - German - DIN
Learn More€39.35 -
UNE 18091:1985
NEEDLE ROLLER BEARINGS. LIGHT AND MEDIUM SERIES. DIMENSIONS AND TOLERANCES.
8/15/1985 - PDF - Spanish - AENOR
Learn More€17.00 -
BS 6613:1985
Methods for specifying characteristics of resilient shaft couplings
7/31/1985 - PDF - English - BSI
Learn More€151.00 -
€17.00
-
€49.00
-
VDI 2159:1985-07 (R2017)
Characteristic values of emissions of technical sound sources, gearing noise
7/1/1985 - PDF - German - VDI
Learn More€99.25 -
DIN 24536:1985-05
Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings
5/1/1985 - PDF - German - DIN
Learn More€39.35 -
DIN 24539-1:1985-05
Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth
5/1/1985 - PDF - German - DIN
Learn More€22.99 -
DIN 24539-2:1985-05
Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth
5/1/1985 - PDF - German - DIN
Learn More€22.99 -
DIN 24541:1985-05
Equipment for steelworks and rolling mills; shuttering steeves for anchor boxes according to DIN 24539; dimensions, designation
5/1/1985 - PDF - German - DIN
Learn More€22.99 -
BS 4185-13:1985
Machine tool components Specification for dimensions of counterbored holes
4/30/1985 - PDF - English - BSI
Learn More€89.00 -
€32.34
-
€40.56
-
€32.34
-
€40.56
-
€14.00
-
€14.00
-
€14.00
-
€14.00
-
€14.00
-
€14.00
-
JIS B 1001:1985 (R2014)
Diameter of clearance holes and counterbores for bolts and screws
3/1/1985 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€25.00
-
€25.00
-
€151.00
-
DIN 103-9:1985-02
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
2/1/1985 - PDF - German - DIN
Learn More€65.89 -
DIN 103-9:1985-02
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
2/1/1985 - PDF - English - DIN
Learn More€82.52 -
€39.35
-
UNE 18163:1985
INDUSTRIAL V-BELT DRIVES. CALCULATION OF POWER RATINGS.
1/15/1985 - PDF - Spanish - AENOR
Learn More€14.00 -
€27.00
-
€17.00
-
€14.00
-
€17.00
-
€0.00
-
DIN 76-2:1984-12
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
12/1/1984 - PDF - German - DIN
Learn More€32.34 -
DIN 76-2:1984-12
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
12/1/1984 - PDF - English - DIN
Learn More€40.56 -
NF E25-659 (12/1984)
Tapping screws. Cross recessed mushroom head ("poelier"). Symbol RL Z.
12/1/1984 - Paper - French - AFNOR
Learn More€34.50 -
€32.34
-
€40.56
-
UNE 18016:1984
CYDINDRICAL GEARS FOR GENERAL AND HEAVY ENGINEERING-BASIC RACK.
11/15/1984 - PDF - Spanish - AENOR
Learn More€14.00 -
ISO 4863:1984 (R2023)
Resilient shaft couplings
Information to be supplied by users and manufacturers
11/1/1984 - Paper - French - ISO
Learn More€48.00 -
ISO 4863:1984 (R2023)
Resilient shaft couplings
Information to be supplied by users and manufacturers
11/1/1984 - Paper - English - ISO
Learn More€48.00 -
UNE 18173:1984
SPHERICAL PLAIN RADIAL BEARINGS, JOINT TYPE.- TOLERANCES.
10/15/1984 - PDF - Spanish - AENOR
Learn More€17.00 -
UNE 18132:1984
ROLLING BEARING. METRIC SERIES. CHAMFER DIMENSION LIMITS.
10/15/1984 - PDF - Spanish - AENOR
Learn More€27.00 -
NF E90-002 (10/1984) (R2014)
Mechanical vibrations and shocks. Balancing. Vocabulary.
10/1/1984 - Paper - French - AFNOR
Learn More€60.50 -
BS 4480-8:1984
Plain bearings: metric series Specification for dimensions, tolerances and methods of checking thin-walled flanged half bearings
9/28/1984 - PDF - English - BSI
Learn More€250.00 -
VDI 2241 Blatt 2:1984-09
Friction clutches and brakes, typ related properties, criteria for selection, examples of calculations
9/1/1984 - PDF - German - VDI
Learn More€107.75 -
DIN 808:1984-08
Machine tools; cardan joints; sizes, connecting dimensions, loading, installation
8/1/1984 - PDF - German - DIN
Learn More€45.98 -
DIN 4000-31:1984-07
Tabular layouts of article characteristics for fuse-links and circuit breakers
7/1/1984 - PDF - German - DIN
Learn More€52.90 -
ASME B1.2-1983 (R2017)
Gages and Gaging for Unified Inch Screw Threads (B1.2 - 1983)
6/15/1984 - Papier - English - ASME
Learn More€181.00 -
€49.00
-
BS 4480-6:1984
Plain bearings: metric series Specification for dimensions and tolerances of ring type thrust washers made from strip
5/31/1984 - PDF - English - BSI
Learn More€151.00 -
UNE 18172-2:1984
SPHERICAL PLAIN RADIAL BEARINGS, JOINT TYPE. BOUNDARY DIMENSIONS. DIMENSION SERIES EW, BEARINGS WITH EXTENDED INNER RING.
5/15/1984 - PDF - Spanish - AENOR
Learn More€14.00 -
€17.00
-
€27.00
-
€14.00
-
€48.00
-
UNE 18172-3:1984
SPHERICAL PLAIN RADIAL BEARINGS, JOINT TYPE. BOUNDARY DIMENSIONS. DIMENSION SERIES C.
4/15/1984 - PDF - Spanish - AENOR
Learn More€17.00 -
UNE 18088:1984
ROLLING BEARINGS. METRIC TAPERED ROLLER BEARINGS. BOUNDARY DIMENSIONS AND SERIES DESIGNATIONS.
4/15/1984 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE 18088/1C:1984
METRIC TAPERED ROLLER BEARINGS. DOUBLE ROW BEARINGS. BOUNDARY DIMENSIONS. ADDENDUM 1.
4/15/1984 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE 18088/2C:1984
METRIC PATERED ROLLER BEARINGS. FLANGED CUPS. BOUNDARY DIMENSIONS. ADDENDUM 2.
4/15/1984 - PDF - Spanish - AENOR
Learn More€39.00 -
€39.00
-
UNE 18178:1984
NEEDLE ROLLER BEARINGS. HEAVY SERIES. DIMENSIONS AND TOLERANCES.
4/15/1984 - PDF - Spanish - AENOR
Learn More€17.00 -
UNE 18005:1984
CYLINDRICAL GEARS FOR GENERAL ENGINEERING AND FOR HEAVY ENGINEERING. MODULES AND DIAMETRICAL PITCHES.
4/15/1984 - PDF - Spanish - AENOR
Learn More€14.00 -
UNE 18033:1984
INTERNATIONAL GEAR NOTATION. SYMBOLS FOR GEOMETRICAL DATA.
4/15/1984 - PDF - Spanish - AENOR
Learn More€39.00 -
VDI 2130:1984-04 (R2016)
Crank and rocker mechanisms, design and computation in four-link planar linkages
4/1/1984 - PDF - English, German - VDI
Learn More€107.75 -
BS 6487:1984
Specification for split pin holes and wire holes in bolts, screws and studs
3/30/1984 - PDF - English - BSI
Learn More€151.00 -
€63.00
-
VDI 3720 Blatt 5:1984-03
Noise abatement by design, hydraulic components and systems
3/1/1984 - PDF - German - VDI
Learn More€99.25 -
DIN 2211-1:1984-03
Power transmission elements, grooved pulleys for narrow V-belts, dimensions, materials
3/1/1984 - PDF - German - DIN
Learn More€52.90 -
DIN 2211-1:1984-03
Power transmission elements, grooved pulleys for narrow V-belts, dimensions, materials
3/1/1984 - PDF - English - DIN
Learn More€66.07 -
DIN 2211-2:1984-03
Power transmission elements, grooved pulleys for narrow V-belts, inspection of grooves
3/1/1984 - PDF - German - DIN
Learn More€32.34 -
DIN 2211-2:1984-03
Power transmission elements, grooved pulleys for narrow V-belts, inspection of grooves
3/1/1984 - PDF - English - DIN
Learn More€40.56 -
€45.98
-
€52.90
-
NF F01-234 (02/1984) (R2009)
Rolling stock. Articulations with clevis and tenon. Inner steel rings type AGG.
2/1/1984 - Paper - French - AFNOR
Learn More€34.67 -
NF F01-233 (02/1984) (R2009)
Rolling stock. Articulations with gudgeon. Inner and outer steel rings types AEG, lAG.
2/1/1984 - Paper - French - AFNOR
Learn More€34.67 -
NF F01-231 (02/1984) (R2009)
Rolling stock. Articulations with clevis and tenon and with gudgeon. Inner steel rings type as, ag.
2/1/1984 - Paper - French - AFNOR
Learn More€34.67 -
VDI 3720 Blatt 4:1984-01
Noise abatement by design, rotary machine-elements and their bearing
1/1/1984 - PDF - German - VDI
Learn More€90.75 -
UNE 18108:1983
PULLEYS FOR CLASSICAL AND NARROW V-BELTS. GEOMETRICAL INSPECTION OF GROOVES.
12/15/1983 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE 18026:1983
Rolling bearings. Cylindrical steel rollers. Tolerances.
12/15/1983 - PDF - Spanish - AENOR
Learn More€27.00 -
DIN 4000-41:1983-12
Tabular layouts of article characteristics for solder lugs, solder pins, soldering terminals
12/1/1983 - PDF - German - DIN
Learn More€45.98 -
DIN 38:1983-12
Plain bearings - Bearing metal lining for thick-walled multilayer plain bearings
12/1/1983 - PDF - German - DIN
Learn More€32.34 -
DIN 38:1983-12
Plain bearings, bearing metal lining for thick-walled multilayer plain bearings
12/1/1983 - PDF - English - DIN
Learn More€40.56 -
DIN 7473:1983-12
Plain bearings, thick-walled multilayer plain bearings with cylindrical bore, undivided
12/1/1983 - PDF - German - DIN
Learn More€32.34 -
DIN 7474:1983-12
Plain bearings, thick-walled multilayer plain bearings with cylindrical bore, divided
12/1/1983 - PDF - German - DIN
Learn More€32.34 -
NF F03-004 (11/1983) (R2013)
Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-005 (11/1983) (R2013)
Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-006 (11/1983) (R2013)
Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NF F03-016 (11/1983) (R2013)
Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
NBN E 03-003:1984
ISO metric triangular screw thread - General and principal dimensions
11/1/1983 - PDF - French, Dutch - NBN
Learn More€58.00 -
NF F03-007 (11/1983) (R2013)
Railway rolling stock - Grade A - Round head and domed head nuts - Symbols R and CR
11/1/1983 - Paper - French - AFNOR
Learn More€34.67 -
UNE 18175:1983
NEEDLE ROLLER BEARINGS.- TRACK ROLLERS.- BOUNDARY DIMENSIONS.
10/15/1983 - PDF - Spanish - AENOR
Learn More€17.00 -
€48.00