21 : Mechanical systems and components for general use
-
€37.00
-
€37.00
-
NBN EN ISO 1483:2011
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
9/23/2011 - PDF - English -
Learn More€37.00 -
€37.00
-
NBN EN ISO 7051:2011
Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
9/23/2011 - PDF - French -
Learn More€37.00 -
€37.00
-
€37.00
-
NBN EN ISO 1483:2011
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
9/23/2011 - PDF - French -
Learn More€37.00 -
NBN EN ISO 7050:2011
Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
9/23/2011 - PDF - German -
Learn More€37.00 -
NBN EN ISO 1482:2011
Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
9/23/2011 - PDF - English -
Learn More€37.00 -
€37.00
-
€37.00
-
NBN EN ISO 7051:2011
Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
9/23/2011 - PDF - German -
Learn More€37.00 -
NBN EN ISO 1482:2011
Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
9/23/2011 - PDF - French -
Learn More€37.00 -
€37.00
-
€37.00
-
DIN EN 912:2011-09
Timber fasteners - Specifications for connectors for timbers, German version EN 912:2011
9/1/2011 - PDF - German -
Learn More€115.33 -
DIN 4000-128:2011-09
Tabular layout of article characteristics - Part 128: Bonded abrasive products with bore or threaded insert
9/1/2011 - PDF - German -
Learn More€99.35 -
DIN 4000-133:2011-09
Tabular layouts of properties - Part 133: Super abrasive products with shank
9/1/2011 - PDF - German -
Learn More€79.72 -
DIN 4000-144:2011-09
Tabular layouts of properties - Part 144: Master gears and truing gears for involute teeth
9/1/2011 - PDF - German -
Learn More€72.80 -
DIN 4000-131:2011-09
Tabular layout of properties - Part 131: Abrasive products on base
9/1/2011 - PDF - German -
Learn More€85.79 -
DIN 4000-136:2011-09
Tabular layouts of properties - Part 136: Holder and chuck tools for rotating and stationary grinding and dressing tools
9/1/2011 - PDF - German -
Learn More€85.79 -
DIN EN ISO 10684:2011-09
Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008)
9/1/2011 - PDF - English -
Learn More€107.48 -
€144.02
-
DIN 4000-129:2011-09
Tabular layout of article characteristics - Part 129: Bonded abrasive segments, honing tools, abrasive bars and grindstones
9/1/2011 - PDF - German -
Learn More€72.80 -
DIN 4000-134:2011-09
Tabular layouts of properties - Part 134: Non rotating products and honing tools with diamond or boron nitride
9/1/2011 - PDF - German -
Learn More€85.79 -
DIN EN ISO 10684:2011-09
Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008), German version EN ISO 10684:2004 + AC:2009
9/1/2011 - PDF - German -
Learn More€85.79 -
DIN 4000-132:2011-09
Tabular layouts of properties - Part 132: Super abrasive products with bore
9/1/2011 - PDF - German -
Learn More€104.95 -
DIN 4000-137:2011-09
Tabular layouts of properties - Part 137: Tools with geometrically undefined cutting edges for machining of gears
9/1/2011 - PDF - German -
Learn More€85.79 -
DIN 4000-130:2011-09
Tabular layout of properties - Part 130: Abrasive pencils and abrasive wheels with thread inserts
9/1/2011 - PDF - German -
Learn More€72.80 -
DIN 4000-135:2011-09
Tabular layouts of properties - Part 135: Tools for dressing and profile trueing of bonded grinding tools
9/1/2011 - PDF - German -
Learn More€104.95 -
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€151.00
-
€48.00
-
€163.00
-
ISO 7047:2011 (R2021)
Raised countersunk head screws (common head style) with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - French -
Learn More€48.00 -
€48.00
-
ISO 7046-2:2011 (R2021)
Countersunk flat head screws (common head style) with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - English -
Learn More€48.00 -
ISO 7046-1:2011 (R2021)
Countersunk flat head screws (common head style) with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - French -
Learn More€48.00 -
ISO 7045:2011 (R2021)
Pan head screws with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - English -
Learn More€48.00 -
€48.00
-
€48.00
-
ISO 7047:2011 (R2021)
Raised countersunk head screws (common head style) with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - English -
Learn More€48.00 -
€48.00
-
€163.00
-
ISO 7046-2:2011 (R2021)
Countersunk flat head screws (common head style) with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - French -
Learn More€48.00 -
ISO 7046-1:2011 (R2021)
Countersunk flat head screws (common head style) with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - English -
Learn More€48.00 -
ISO 7045:2011 (R2021)
Pan head screws with type H or type Z cross recess
Product grade A
8/26/2011 - Paper - French -
Learn More€48.00 -
€48.00
-
€22.00
-
JB/T 10187-2011
Rolling bearings-deep groove hall bearing vibration(velocity) - Specifications
8/15/2011 - PDF - English -
Learn More€66.00 -
ISO 12090-2:2011 (R2022)
Rolling bearings
Profiled rail guides for linear motion rolling bearings
8/8/2011 - Paper - French -
Learn More€72.00 -
ISO 12090-1:2011 (R2022)
Rolling bearings
Profiled rail guides for linear motion rolling bearings
8/8/2011 - Paper - English -
Learn More€110.00 -
ISO 12090-1:2011 (R2022)
Rolling bearings
Profiled rail guides for linear motion rolling bearings
8/8/2011 - Paper - French -
Learn More€110.00 -
ISO 12090-2:2011 (R2022)
Rolling bearings
Profiled rail guides for linear motion rolling bearings
8/8/2011 - Paper - English -
Learn More€72.00 -
€48.00
-
€48.00
-
DIN 83106:2011-08
Profile gaskets for heavy hinged doors on ships and for hatches
8/1/2011 - PDF - German -
Learn More€45.98 -
DIN ISO 14635-3:2011-08
Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
8/1/2011 - PDF - German -
Learn More€85.79 -
DIN ISO 14635-3:2011-08
Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
8/1/2011 - PDF - English -
Learn More€107.48 -
€59.63
-
€151.00
-
BS EN 60300-3-12:2011
Dependability management Application guide. Integrated logistic support
7/31/2011 - PDF - English -
Learn More€348.00 -
€348.00
-
ISO 1483:2011 (R2021)
Slotted raised countersunk (oval) head tapping screws
General information
7/21/2011 - Paper - French -
Learn More€48.00 -
ISO 1482:2011 (R2021)
Slotted countersunk (flat) head tapping screws
General information
7/21/2011 - Paper - English -
Learn More€48.00 -
€48.00
-
€48.00
-
ISO 7050:2011 (R2021)
Cross-recessed countersunk (flat) head tapping screws
General information
7/21/2011 - Paper - French -
Learn More€48.00 -
ISO 7050:2011 (R2021)
Cross-recessed countersunk (flat) head tapping screws
General information
7/21/2011 - Paper - English -
Learn More€48.00 -
€48.00
-
ISO 1483:2011 (R2021)
Slotted raised countersunk (oval) head tapping screws
General information
7/21/2011 - Paper - English -
Learn More€48.00 -
€48.00
-
ISO 1482:2011 (R2021)
Slotted countersunk (flat) head tapping screws
General information
7/21/2011 - Paper - French -
Learn More€48.00 -
€48.00
-
ISO 7051:2011 (R2021)
Cross-recessed raised countersunk (oval) head tapping screws
General information
7/21/2011 - Paper - French -
Learn More€48.00 -
ISO 7051:2011 (R2021)
Cross-recessed raised countersunk (oval) head tapping screws
General information
7/21/2011 - Paper - English -
Learn More€48.00 -
€48.00
-
€48.00
-
€48.00
-
UNE-EN ISO 225:2011
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
7/20/2011 - PDF - English -
Learn More€103.20 -
UNE-EN ISO 225:2011
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
7/20/2011 - PDF - Spanish -
Learn More€86.00 -
SAE ARP 4048:2020-05-13
BALANCING MACHINES - DESCRIPTION AND EVALUATION HORIZONTAL, TWO-PLANE, HARD-BEARING TYPE FOR GAS TURBINE ROTORS
7/19/2011 - PDF - English -
Learn More€114.00 -
€60.00
-
UNE-EN ISO 12474:2011
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
7/6/2011 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 12474:2011
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
7/6/2011 - PDF - English -
Learn More€69.60 -
€66.07
-
DIN EN ISO 10510:2011-07
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
7/1/2011 - PDF - English -
Learn More€66.07 -
DIN EN ISO 7048:2011-07
Cross-recessed cheese head screws (ISO 7048:2011), German version EN ISO 7048:2011
7/1/2011 - PDF - German -
Learn More€52.90 -
DIN EN ISO 10510:2011-07
Tapping screw and washer assemblies with plain washers (ISO 10510:2011), German version EN ISO 10510:2011
7/1/2011 - PDF - German -
Learn More€52.90 -
BS EN 62502:2011
Analysis techniques for dependability. Event tree analysis (ETA)
6/30/2011 - PDF - English -
Learn More€331.00 -
SAE AS 81935/1A:2011-06-20
BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,WIDE, EXTERNALLY THREADED, -65 TO +325 °F
6/20/2011 - PDF - English -
Learn More€47.00 -
SAE J 924:2011-06-13
Thrust Washers – Design and Application (Stabilized: Jun 2011)
6/13/2011 - PDF - English -
Learn More€105.00 -
€109.00
-
€82.52
-
DIN EN ISO 14584:2011-06
Hexalobular socket raised countersunk head screws (ISO 14584:2011), German version EN ISO 14584:2011
6/1/2011 - PDF - German -
Learn More€52.90 -
DIN 737:2011-06
Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve
6/1/2011 - PDF - German -
Learn More€52.90 -
DIN 5417:2011-06
Securing parts for rolling bearings - Snap rings for bearings with ring groove
6/1/2011 - PDF - German -
Learn More€45.98 -
DIN EN ISO 14583:2011-06
Hexalobular socket pan head screws (ISO 14583:2011), German version EN ISO 14583:2011
6/1/2011 - PDF - German -
Learn More€52.90 -
DIN 628-5:2011-06
Rolling bearings - Angular contact radial ball bearings - Part 5: Double row, with spacer balls
6/1/2011 - PDF - German -
Learn More€45.98 -
DIN EN ISO 14580:2011-06
Hexalobular socket cheese head screws (ISO 14580:2011), German version EN ISO 14580:2011
6/1/2011 - PDF - German -
Learn More€52.90 -
DIN EN ISO 14584:2011-06
Hexalobular socket raised countersunk head screws (ISO 14584:2011)
6/1/2011 - PDF - English -
Learn More€66.07 -
DIN 738:2011-06
Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
6/1/2011 - PDF - German -
Learn More€52.90 -
DIN EN ISO 14579:2011-06
Hexalobular socket head cap screws (ISO 14579:2011), German version EN ISO 14579:2011
6/1/2011 - PDF - German -
Learn More€65.89 -
€66.07
-
DIN 736:2011-06
Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve
6/1/2011 - PDF - German -
Learn More€52.90 -
DIN 628-5:2011-06
Rolling bearings - Angular contact radial ball bearings - Part 5: Double row, with spacer balls
6/1/2011 - PDF - English -
Learn More€57.57 -
€66.07
-
UNE-EN 3280:2011 (R2017)
Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification (Endorsed by AENOR in June of 2011.)
6/1/2011 - PDF - English -
Learn More€74.00 -
DIN 739:2011-06
Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
6/1/2011 - PDF - German -
Learn More€52.90 -
€331.00
-
€152.00
-
€37.00
-
JIS B 1512-1:2011 (R2016)
Rolling bearings - Boundary dimensions - Part 1: Radial bearings
5/20/2011 - PDF - Japanese -
Learn More€36.27 -
JIS B 1512-6:2011 (R2016)
Rolling bearings - Boundary dimensions - Part 6: Chamfer dimensions for outer ring non-thrust side of single-row angular contact ball bearings
5/20/2011 - PDF - Japanese -
Learn More€25.00 -
€37.00
-
€37.00
-
NBN EN ISO 10510:2011
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
5/20/2011 - PDF - English -
Learn More€37.00 -
NBN EN ISO 14584:2011
Hexalobular socket raised countersunk head screws (ISO 14584:2011)
5/20/2011 - PDF - German -
Learn More€37.00 -
JIS B 1512-4:2011 (R2016)
Rolling bearings - Boundary dimensions - Part 4: Flange dimensions of radial ball bearings with flanged outer ring
5/20/2011 - PDF - Japanese -
Learn More€25.00 -
€58.00
-
NBN EN ISO 10510:2011
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
5/20/2011 - PDF - French -
Learn More€37.00 -
€37.00
-
JIS B 1512-2:2011 (R2016)
Rolling bearings - Boundary dimensions - Part 2: Thrust bearings
5/20/2011 - PDF - Japanese -
Learn More€36.27 -
€37.00
-
€37.00
-
€37.00
-
NBN EN ISO 14584:2011
Hexalobular socket raised countersunk head screws (ISO 14584:2011)
5/20/2011 - PDF - English -
Learn More€37.00 -
JIS B 1512-5:2011 (R2016)
Rolling bearings - Boundary dimensions - Part 5: Chamfer dimensions for loose rib and non-rib sides of single-row cylindrical roller bearings
5/20/2011 - PDF - Japanese -
Learn More€25.00 -
€37.00
-
€58.00
-
NBN EN ISO 10510:2011
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
5/20/2011 - PDF - German -
Learn More€37.00 -
NBN EN ISO 14584:2011
Hexalobular socket raised countersunk head screws (ISO 14584:2011)
5/20/2011 - PDF - French -
Learn More€37.00 -
JIS B 1512-3:2011 (R2016)
Rolling bearings - Boundary dimensions - Part 3: Tapered roller bearings
5/20/2011 - PDF - Japanese -
Learn More€46.02 -
€58.00
-
€37.00
-
€72.00
-
€72.00
-
DIN EN ISO 14586:2011-05
Hexalobular socket countersunk head tapping screws (ISO 14586:2011), German version EN ISO 14586:2011
5/1/2011 - PDF - German -
Learn More€52.90 -
DIN EN ISO 14585:2011-05
Hexalobular socket pan head tapping screws (ISO 14585:2011), German version EN ISO 14585:2011
5/1/2011 - PDF - German -
Learn More€52.90 -
DIN EN ISO 14587:2011-05
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
5/1/2011 - PDF - English -
Learn More€66.07 -
DIN EN ISO 14586:2011-05
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
5/1/2011 - PDF - English -
Learn More€66.07 -
€66.07
-
DIN EN ISO 14587:2011-05
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011), German version EN ISO 14587:2011
5/1/2011 - PDF - German -
Learn More€52.90 -
€151.00
-
€180.00
-
€151.00
-
€151.00
-
€199.00
-
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
4/1/2011 - PDF - German -
Learn More€32.34 -
DIN 79012:2011-04
Screw threads for bicycles and mopeds - Theoretical values, limiting screw thread dimensions
4/1/2011 - PDF - German -
Learn More€39.35 -
€79.72
-
€48.00
-
€48.00
-
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
4/1/2011 - PDF - German -
Learn More€32.34 -
DIN 625-1:2011-04
Rolling bearings - Radial deep groove ball bearings - Part 1: Single row
4/1/2011 - PDF - English -
Learn More€91.12 -
DIN 4000-127:2011-04
Tabular layouts of properties - Part 127: Reamers for replaceable inserts
4/1/2011 - PDF - German -
Learn More€79.72 -
€59.63
-
DIN 6063-2:2011-04
Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
4/1/2011 - PDF - English -
Learn More€40.56 -
€99.44
-
€30.75
-
DIN 6063-1:2011-04
Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
4/1/2011 - PDF - English -
Learn More€40.56 -
DIN 5406:2011-04
Rolling bearings - Lockwashers and locking clips for use with locknuts
4/1/2011 - PDF - English -
Learn More€74.58 -
DIN 625-1:2011-04
Rolling bearings - Radial deep groove ball bearings - Part 1: Single row
4/1/2011 - PDF - German -
Learn More€72.80 -
€39.50
-
BS 7371-8:2011
Coatings on metal fasteners Specification for sherardized coatings
3/31/2011 - PDF - English -
Learn More€180.00 -
NBN EN ISO 14586:2011
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
3/23/2011 - PDF - French -
Learn More€37.00 -
€37.00
-
€37.00
-
NBN EN ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
3/23/2011 - PDF - English -
Learn More€37.00 -
NBN EN ISO 14586:2011
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
3/23/2011 - PDF - German -
Learn More€37.00 -
NBN EN ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
3/23/2011 - PDF - French -
Learn More€37.00 -
€37.00
-
NBN EN ISO 14586:2011
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
3/23/2011 - PDF - English -
Learn More€37.00 -
NBN EN ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
3/23/2011 - PDF - German -
Learn More€37.00 -
€55.77
-
ISO 10510:2011 (R2021)
Tapping screw and washer assemblies with plain washers
General information
3/22/2011 - Paper - English -
Learn More€48.00 -
ISO 10510:2011 (R2021)
Tapping screw and washer assemblies with plain washers
General information
3/22/2011 - Paper - French -
Learn More€48.00 -
€48.00
-
€72.00
-
€48.00
-
€48.00
-
ISO 14584:2011 (R2021)
Hexalobular socket raised countersunk head screws
General information
3/16/2011 - Paper - English -
Learn More€48.00 -
€72.00
-
€48.00
-
ISO 14584:2011 (R2021)
Hexalobular socket raised countersunk head screws
General information
3/16/2011 - Paper - French -
Learn More€48.00 -
€0.00
-
DIN 124:2011-03
Steel round head rivets - Nominal diameters from 10 mm to 36 mm
3/1/2011 - PDF - English -
Learn More€82.52 -
€52.90
-
€66.07
-
€52.90
-
€49.16
-
NF ISO 113, E22-309 (03/2011)
Rolling bearings - Plummer block housings - Boundary dimensions - Roulements
3/1/2011 - Paper - French -
Learn More€48.00