19.040 : Environmental testing

Items 1 to 200 of 1100 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  • 20/30415103 DC:2020

    BS EN IEC 60068-2-11. Basic environmental testing procedures Part 2-11. Tests. Test Ka. Salt mist
    3/13/2020 - PDF - English - BSI
    Learn More
    €23.70

  • 20/30415081 DC:2020

    BS EN 60947-9-2. Low-voltage switchgear and controlgear. Active arc-fault mitigation systems Part 9-2. Optical-based internal arc-detection devices
    3/12/2020 - PDF - English - BSI
    Learn More
    €23.70

  • PD CEN/TS 16637-1:2018:2020 + Redline

    Tracked Changes. Construction products. Assessment of release dangerous substances Guidance for the determination leaching tests and additional testing steps
    2/27/2020 - PDF - English - BSI
    Learn More
    €369.72

  • BS EN 60068-2-39:2016:2020 + Redline

    Tracked Changes. Environmental testing Tests. Tests and guidance: Combined temperature or humidity with low air pressure tests
    2/26/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN 60068-2-60:2015:2020 + Redline

    Tracked Changes. Environmental testing Tests. Test Ke: Flowing mixed gas corrosion test
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN IEC 60721-3-1:2018:2020 + Redline

    Tracked Changes. Classification of environmental conditions groups parameters and their severities. Storage
    2/25/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN IEC 60068-2-52:2018:2020 + Redline

    Tracked Changes. Environmental testing Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
    2/25/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN IEC 60068-2-5:2018:2020 + Redline

    Tracked Changes. Environmental testing Tests. Test S. Simulated solar radiation at ground level and guidance for weathering
    2/25/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN 60068-2-18:2017:2020 + Redline

    Tracked Changes. Environmental testing Tests. Test R and guidance: Water
    2/25/2020 - PDF - English - BSI
    Learn More
    €391.29

  • BS EN 60068-3-13:2016:2020 + Redline

    Tracked Changes. Environmental testing Supporting documentation and guidance on Test T. Soldering
    2/25/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN 60068-3-5:2018:2020 + Redline

    Tracked Changes. Environmental testing Supporting documentation and guidance. Confirmation of the performance temperature chambers
    2/25/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN IEC 60721-3-3:2019:2020 + Redline

    Tracked Changes. Classification of environmental conditions groups parameters and their severities. Stationary use at weatherprotected locations
    2/24/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN IEC 60721-3-4:2019:2020 + Redline

    Tracked Changes. Classification of environmental conditions groups parameters and their severities. Stationary use at non-weatherprotected locations
    2/24/2020 - PDF - English - BSI
    Learn More
    €200.27

  • BS EN IEC 61207-3:2019:2020 + Redline

    Tracked Changes. Gas Analyzers. Expression of performance Paramagnetic oxygen analysers
    2/24/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS EN ISO 9227:2017:2020 + Redline

    Tracked Changes. Corrosion tests in artificial atmospheres. Salt spray tests
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN IEC 60068-2-82:2019:2020 + Redline

    Tracked Changes. Environmental testing Tests. Test Xw1: Whisker test methods for components and parts used in electronic assemblies
    2/24/2020 - PDF - English - BSI
    Learn More
    €329.67

  • 20/30410756 DC:2020

    BS EN 4860. Aerospace series. Environmental testing. Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing of fingertips and hands
    1/16/2020 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 60068-2-SER (2020-01)

    IEC 60068-2:2020 SER Environmental testing - Part 2: Tests - ALL PARTS
    1/6/2020 - PDF - English, French - IEC
    Learn More
    €5,801.00

  • 19/30408756 DC:2019

    BS EN 4890. Aerospace series. Steel X4CrNiMo16-5-1. Air melted. Hardened and tempered. Sheets and plates. 0,6 mm = a = 50 mm. 900 MPa = Rm = 1 050 MPa
    12/20/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30408757 DC:2019

    BS EN 3838. Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
    12/20/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN 60068-2-64:2008+A1:2019

    Environmental testing Tests. Test Fh: Vibration, broadband random and guidance
    12/13/2019 - PDF - English - BSI
    Learn More
    €284.40

  • 19/30406770 DC:2019

    BS EN 2995-006. Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 Part 006. 6,3 mm & 2,8mm blade terminal. With polarized signal contact. Product standard
    11/28/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30406414 DC:2019

    BS EN 2302. Aerospace series. Heat resisting nickel base alloy Ni-Cr20Co3Fe3. Rm = 650 MPa. Sheets and strips, cold rolled. 0,25 mm < a = 3 mm
    11/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30406273 DC:2019

    BS EN 3774-006. Aerospace series. Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 Part 006. 6,35 blade terminal. Product standard
    11/20/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30406216 DC:2019

    BS EN 4641-102. Aerospace series. Cables, optical 125 µm outside diameter cladding Part 102. Semi-loose 62,5/125 GI fibre nominal 1,8 mm diameter. Product standard
    11/19/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30406217 DC:2019

    BS EN 2266-008. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 200 Part 008. DRP (pair) DRT (3 cores) DRQ (4 family, multicore UV laser printable jacketed cable. Product standard
    11/19/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30405712 DC:2019

    BS EN 2713-012. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between – 55 °C 200 Part 012. MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cables family. Silver plated copper screened (spiral) jacketed, UV laser printable. Product standard
    11/11/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN IEC 60068-3-3:2019

    Environmental testing Supporting documentation and guidance. Seismic test methods for equipment
    11/8/2019 - PDF - English - BSI
    Learn More
    €300.99

  • 19/30405560 DC:2019

    BS EN 3375-008. Aerospace series. Cable, electrical, for digital data transmission Part 008. Single braid. Star Quad 100 ohms. Type KD. Product standard
    11/8/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30405287 DC:2019

    BS EN 4840-002. Aerospace series. Heat shrinkable moulded shapes Part 002. Index of product standards and dimensions
    11/5/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN IEC 60068-2-52, C20-752PR (11/2019)


    11/1/2019 - Paper - English, French - AFNOR
    Learn More
    €68.89

  • UNE-EN IEC 60068-3-3:2019

    Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment (Endorsed by Asociación Española de Normalización in November of 2019.)
    11/1/2019 - PDF - English - AENOR
    Learn More
    €90.00

  • NF EN 60068-2-64/A1, C20-764/A1 (11/2019)

    Amendment 1 - Environmental testing - Part 2-64: Test methods - Test Fh: Vibration, broadband random (digital control) and guidance - Amendement 1 - Essais d'environnement - Partie 2-64 : Méthodes d'essai - Essai Fh : Vibrations aléatoires (commande numérique) à large bande et guide
    11/1/2019 - Paper - French - AFNOR
    Learn More
    €64.05

  • 19/30405286 DC:2019

    BS EN 4530-002. Aerospace series. Sealing sleeves used in elements of connection Part 002. List and utilization sealing
    10/31/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30405288 DC:2019

    BS EN 4530-004. Aerospace series. Sealing sleeves used in elements of connection Part 004. for external diameter cable 3 mm to 4,1 mm. Product standard
    10/31/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN 60068-2-67:1996+A1:2019

    Environmental testing Tests. Test Cy. Damp heat, steady state, accelerated test primarily intended for components
    10/25/2019 - PDF - English - BSI
    Learn More
    €130.35

  • IEC 60068-2-64 Edition 2.1 (2019-10)

    IEC 60068-2-64:2008+AMD1:2019 consolidated version Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
    10/9/2019 - PDF - English, French - IEC
    Learn More
    €305.00

  • IEC 60068-2-64 AMD 1 (2019-10)

    IEC 60068-2-64:2008/AMD1:2019 Amendment 1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
    10/9/2019 - PDF - English, French - IEC
    Learn More
    €41.00

  • NF EN IEC 60068-3-3, C20-420 (10/2019)

    Essais d'environnement - Partie 3-3 : guide - Méthodes d'essai sismiques applicables aux matériels
    10/1/2019 - Paper - French - AFNOR
    Learn More
    €125.77

  • PR NF X50-144-3, X50-144-3PR (10/2019)


    10/1/2019 - Paper - French - AFNOR
    Learn More
    €116.74

  • PR NF EN IEC 60068-3-7, C20-403-7PR (10/2019)


    10/1/2019 - Paper - English, French - AFNOR
    Learn More
    €61.17

  • UNE-EN 60068-2-67:1996/A1:2019

    Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components (Endorsed by Asociación Española de Normalización in October of 2019.)
    10/1/2019 - PDF - English - AENOR
    Learn More
    €28.00

  • UNE-EN 60068-2-69:2017/A1:2019

    Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method (Endorsed by Asociación Española de Normalización in October of 2019.)
    10/1/2019 - PDF - English - AENOR
    Learn More
    €58.00

  • UNE-EN IEC 61207-3:2019

    Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (Endorsed by Asociación Española de Normalización in October of 2019.)
    10/1/2019 - PDF - English - AENOR
    Learn More
    €74.00

  • BS EN 60068-2-69:2017+A1:2019

    Environmental testing Tests. Test Te/Tc. Solderability of electronic components and printed boards by the wetting balance (force measurement) method
    9/11/2019 - PDF - English - BSI
    Learn More
    €300.99

  • BS EN IEC 60068-2-85:2019

    Environmental testing Tests. Test Fj. Vibration. Long time history replication
    9/4/2019 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN IEC 61207-3:2019

    Gas Analyzers. Expression of performance Paramagnetic oxygen analysers
    9/4/2019 - PDF - English - BSI
    Learn More
    €253.59

  • UNE-EN IEC 60721-3-3:2019

    Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations (Endorsed by Asociación Española de Normalización in September of 2019.)
    9/1/2019 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN IEC 60721-3-4:2019

    Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations (Endorsed by Asociación Española de Normalización in September of 2019.)
    9/1/2019 - PDF - English - AENOR
    Learn More
    €66.00

  • IEC 60068-3-3 (2019-08)

    IEC 60068-3-3:2019 Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
    8/23/2019 - PDF - English, French - IEC
    Learn More
    €249.00

  • IEC 60068-3-3 Redline version (2019-08)

    IEC 60068-3-3:2019 RLV Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
    8/23/2019 - PDF - English - IEC
    Learn More
    €324.00

  • NF EN 60068-2-69/A1, C20-700-2-69/A1 (08/2019)

    Essais d'environnement - Partie 2-69 : essais - Essai Te/Tc : essai de brasabilité des composants électroniques et cartes imprimées par la méthode de la balance de mouillage (mesure de la force)
    8/1/2019 - Paper - French - AFNOR
    Learn More
    €48.88

  • NF EN 60068-2-67/A1, C20-767/A1 (08/2019)

    Essai d'environnement - Partie 2-67: Essais - Essai Cy: Essai continu de chaleur humide, essai accéléré applicable en premier lieu aux composants
    8/1/2019 - Paper - French - AFNOR
    Learn More
    €36.11

  • NF EN IEC 60068-2-85, C20-700-2-85 (08/2019)

    Essais d'environnement - Partie 2-85 : Essais - Essai Fj: Vibrations - Reproduction dans le temps par accélérogrammes
    8/1/2019 - Paper - French - AFNOR
    Learn More
    €87.39

  • UNE-EN IEC 60068-2-82:2019

    Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for components and parts used in electronic assemblies (Endorsed by Asociación Española de Normalización in August of 2019.)
    8/1/2019 - PDF - English - AENOR
    Learn More
    €76.00

  • MS 20003:1963 Revision C Notice 5 - Validation

    Indicator, Humidity, Card, Three Spot, Impregnated Areas (Cobaltous Chloride)
    8/1/2019 - PDF sécurisé - English - DODNAV
    Learn More
    €20.00

  • BS EN IEC 60721-3-4:2019

    Classification of environmental conditions groups parameters and their severities. Stationary use at non-weatherprotected locations
    7/25/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 60721-3-3:2019

    Classification of environmental conditions groups parameters and their severities. Stationary use at weatherprotected locations
    7/25/2019 - PDF - English - BSI
    Learn More
    €154.05

  • 19/30400558 DC:2019

    BS EN 4876. Aerospace series. Environmental testing. Durability of the displays by general usage
    7/25/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30365331 DC:2019

    BS EN IEC 60068-2-20. Environmental testing Part 2-20. Tests. Test T. methods for solderability and resistance to soldering heat of devices with leads
    7/17/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN IEC 60068-2-82:2019

    Environmental testing Tests. Test Xw1: Whisker test methods for components and parts used in electronic assemblies
    7/12/2019 - PDF - English - BSI
    Learn More
    €253.59

  • IEC 60068-2-67 Edition 1.1 (2019-07)

    IEC 60068-2-67:1995+AMD1:2019 consolidated version Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
    7/2/2019 - PDF - English, French - IEC
    Learn More
    €66.00

  • IEC 60068-2-67 AMD 1 (2019-07)

    IEC 60068-2-67:1995/AMD1:2019 Amendment 1 - Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
    7/2/2019 - PDF - English, French - IEC
    Learn More
    €10.00

  • NF EN IEC 60721-3-3, C20-003-3 (07/2019)

    Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations - Classification des conditions d'environnement - Partie 3: Classification des groupements des agents d'environnement et de leurs sévérités - Section 3: Utilisation à poste fixe, protégé contre les intempéries
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €78.60

  • NF EN IEC 60721-3-4, C20-003-4 (07/2019)

    Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations - Classification des conditions d'environnement - Partie 3: Classification des groupements des agents d'environnement et de leurs sévérités - Section 4: Utilisation à poste fixe, non protégé contre les intempéries
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €78.60

  • NF EN IEC 60068-2-82, C20-700-2-82 (07/2019)


    7/1/2019 - Paper - French - AFNOR
    Learn More
    €107.86

  • NF EN IEC 60512-11-1, C93-400-11-1 (07/2019)

    Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 11-1 : essais climatiques - Essai 11a - Séquence climatique - Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 11 : Essais climatiques - Section 1: Essai 11a - Séquence climatique
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €74.67

  • NF X50-144-1 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 1 : bases de la démarche pour la prise en compte de l'environnement général - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 1 : Bases de la démarche pour la prise en compte de l'environnement général
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF X50-144-2 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 2 : guide de la démarche de personnalisation en environnement - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 2 : Guide de la démarche de personnalisation en environnement
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF X50-144-5 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 5 : coefficient de garantie - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 5 : Coefficient de garantie
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €91.50

  • NF X50-144-6 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 6 : facteur d'essai
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €91.50

  • NF EN 300019-2-4, Z87-019-2-4 (07/2019)

    Ingénierie de l'environnement (EE) - Conditions et essais d'environnement des équipements de télécommunications - Partie 2-4 : Spécifications des essais environnementaux - Utilisation à poste fixe sur des sites non protégés contre les intempéries (V2.5.1) - Ingénierie de l'environnement (EE) - Conditions d'environnement et essais d'environnement des équipements de télécommunication - Partie 2-4 : spécification des essais environnementaux - Utilisation à poste fixe sur des sites non protégés contre les intempéries
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • 19/30377217 DC:2019

    BS 10176. Taking soil samples for determination of volatile organic compounds (VOCs). Specification
    7/1/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30398558 DC:2019

    BS EN 4179. Aerospace series. Qualification and approval of personnel for non- destructive testing
    7/1/2019 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 61207-3 (2019-06)

    IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
    6/26/2019 - PDF - English, French - IEC
    Learn More
    €178.00

  • IEC 61207-3 Redline version (2019-06)

    IEC 61207-3:2019 RLV Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
    6/26/2019 - PDF - English - IEC
    Learn More
    €231.00

  • 19/30363054 DC:2019

    BS EN 60068-2-21. Environmental testing Part 2-21. Tests. Test U. Robustness of terminations and integral mounting devices
    6/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 60068-2-85 (2019-06)

    IEC 60068-2-85:2019 Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication
    6/20/2019 - PDF - English, French - IEC
    Learn More
    €147.00

  • IEC 60068-2-69 AMD 1 (2019-06)

    IEC 60068-2-69:2017/AMD1:2019 Amendment 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
    6/19/2019 - PDF - English, French - IEC
    Learn More
    €20.00

  • IEC 60068-2-69 Edition 3.1 (2019-06)

    IEC 60068-2-69:2017+AMD1:2019 consolidated version Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
    6/19/2019 - PDF - English, French - IEC
    Learn More
    €406.00

  • 19/30397674 DC:2019

    BS EN 4165-002. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 002. Specification of performance and contact arrangements
    6/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30397675 DC:2019

    BS EN 4165-003. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 003. Modules series 2 and Product standard
    6/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30397677 DC:2019

    BS EN 4165-004. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 004. Stackable mounting receptacle 2 and modules, series Product standard
    6/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30397679 DC:2019

    BS EN 4165-014. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Part 014. Shielded accessory body, 2 and 4 modules for connectors, series 3. Product standard
    6/13/2019 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 60721-3-3 (2019-05)

    IEC 60721-3-3:2019 Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
    5/22/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60721-3-4 (2019-05)

    IEC 60721-3-4:2019 Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations
    5/22/2019 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60068-2-82 (2019-05)

    IEC 60068-2-82:2019 Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
    5/14/2019 - PDF - English, French - IEC
    Learn More
    €208.00

  • PR NF EN IEC 60068-2-70, C20-770PR (05/2019)

    Essais d'environnement - Partie 2-70 : essais - Essai Xb : abrasion des marquages, inscriptions, surfaces et matériaux due au frottement des doigts et des mains - Essais d'environnement - Partie 2-70: Essais - Essai Xb: Abrasion des marquages, inscriptions, surfaces et matériaux due au frottement des doigts et des mains
    5/1/2019 - Paper - French - AFNOR
    Learn More
    €52.27

  • 19/30395307 DC:2019

    BS EN 4884. Aerospace series. Steel X3CrNiMoAl 13-8-2. Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D = 200 mm. 1 200 MPa = Rm = 1 350 MPa
    4/30/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30395276 DC:2019

    BS EN 4883. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Plates. 6 = a = 100 mm. Rm = 1 070 MPa
    4/29/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30393413 DC:2019

    BS EN IEC 60068-2-38. Environmental testing Part 2-38. Tests. Test Z/AD: Composite temperature/humidity cyclic test
    4/25/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30395270 DC:2019

    BS EN 4627. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
    4/24/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30395273 DC:2019

    BS EN 4630. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De = 200 mm. 900 MPa = Rm = 1 050 MPa
    4/24/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30395275 DC:2019

    BS EN 4882. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation treated. Sheets and strips. a = 6 mm. Rm = 1070 MPa
    4/24/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30395274 DC:2019

    BS EN 4631. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
    4/24/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30395271 DC:2019

    BS EN 4628. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De = 200 mm. 1 150 MPa = Rm = 1 300 MPa
    4/24/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN IEC 60721-3-0, C20-003-0PR (04/2019)

    Classification des conditions d'environnement. Partie 3 : classification des groupements des agents d'environnement et de leurs sévérités - Introduction
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €32.51

  • UNE-EN IEC 60746-4:2019

    Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane-covered amperometric sensors (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €71.00

  • 19/30393671 DC:2019

    BS EN 3645-002. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
    3/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30393672 DC:2019

    BS EN 3646-001.Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 continuous Part 001. Technical specification
    3/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30393677 DC:2019

    BS EN 3646-002. Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 continuous Part 002. Specification of performance and contact arrangements
    3/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30393614 DC:2019

    BS EN 4868. Aerospace series. Anodic electrodeposition of hexavalent chromium free primer
    3/20/2019 - PDF - English - BSI
    Learn More
    €23.70

  • ASTM D6669-19

    Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
    3/15/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D6669-19 + Redline

    Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
    3/15/2019 - PDF - English - ASTM
    Learn More
    €56.00

  • 19/30393020 DC:2019

    BS EN 3475-705. Aerospace series. Cables, electrical, aircraft use. Test methods Part 705. Contrast measurement
    3/8/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN 61300-2-54, C93-902-54PR (03/2019)

    Dispositifs d'interconnexion et composants passifs fibroniques - Méthodes fondamentales d'essais et de mesures - Partie 2-54 : essais - Atmosphère corrosive (mélange de gaz)
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €32.51

  • 19/30391410 DC:2019

    BS EN 4708-203. Aerospace series. Sleeves, heat-shrinkable, for binding, insulation and identification Part 203. Polyvinylidene fluoride (PVDF). Identification sleeves. Operating Temperature range -55°C to 225°C. Product Standard
    2/12/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30391326 DC:2019

    BS EN 4708-201. Sleeves, heat-shrinkable, for binding, insulation and identification Part 201. Polyolefin sleeves. Operating Temperature range -55°C to 135°C. Product standard
    2/10/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30390374 DC:2019

    BS EN 60068-2-13. Environmental testing Part 2-13. Tests. Test M. Low air pressure
    2/7/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30391019 DC:2019

    BS EN 2854-002. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C 260°C Part 002. General
    2/7/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30391266 DC:2019

    BS EN 3197. Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
    2/7/2019 - PDF - English - BSI
    Learn More
    €42.66

  • UNE-EN IEC 60721-2-4:2018/AC:2018-12

    Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature (Endorsed by Asociación Española de Normalización in February of 2019.)
    2/1/2019 - PDF - English - AENOR
    Learn More
    €0.00

  • UNE-EN IEC 60721-2-7:2018/AC:2018-12

    Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora (Endorsed by Asociación Española de Normalización in February of 2019.)
    2/1/2019 - PDF - English - AENOR
    Learn More
    €0.00

  • UNE-EN IEC 60721-3-2:2018/AC:2018-12

    Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling (Endorsed by Asociación Española de Normalización in February of 2019.)
    2/1/2019 - PDF - English - AENOR
    Learn More
    €0.00

  • 19/30389871 DC:2019

    BS EN IEC 60068-2-11. Basic environmental testing procedures Part 2-11. Tests. Test Ka. Salt mist
    1/25/2019 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN IEC 60721-2-7:2018:2019

    Classification of environmental conditions Environmental appearing in nature. Fauna and flora
    1/14/2019 - PDF - English - BSI
    Learn More
    €154.05

  • BS EN IEC 60721-2-4:2018:2019

    Classification of environmental conditions Environmental appearing in nature. Solar radiation and temperature
    1/14/2019 - PDF - English - BSI
    Learn More
    €154.05

  • ASTM G151-19

    Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    1/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM G151-19 + Redline

    Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    1/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • PR EN 4860, L17-030PR (01/2019)

    Série aérospatiale - Essais d'environnement - Essai Xb : Abrasion de marquages, inscriptions, surfaces et matériaux due au frottement des doigts et des mains
    1/1/2019 - Paper - French - AFNOR
    Learn More
    €60.48

  • 18/30389354 DC:2018

    BS EN 4881. Aerospace series. Micro-arc oxidation of aluminum and aluminum alloys
    12/20/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30389371 DC:2018

    BS EN 2235. Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification
    12/20/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30389372 DC:2018

    BS EN 3475-505. Aerospace series. Cables, electrical, aircraft use. Test methods Part 505. Tensile test on conductors and strands
    12/20/2018 - PDF - English - BSI
    Learn More
    €23.70

  • ASTM D5995-18

    Standard Guide for Environmental Site Investigation in Cold Regions
    12/15/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM D5995-18 + Redline

    Standard Guide for Environmental Site Investigation in Cold Regions
    12/15/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • BS EN IEC 60721-3-2:2018

    Classification of environmental conditions groups parameters and their severities. Transportation Handling
    12/7/2018 - PDF - English - BSI
    Learn More
    €154.05

  • DIN EN IEC 60721-3-1 VDE 0468-721-3-1:2018-12

    Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and their severities - Storage (IEC 60721-3-1:2018); German version EN IEC 60721-3-1:2018
    12/1/2018 - Paper - German - VDE
    Learn More
    €53.63

  • DIN EN IEC 60721-3-2 VDE 0468-721-3-2:2018-12

    Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling (IEC 60721-3-2:2018); German version EN IEC 60721-3-2:2018
    12/1/2018 - Paper - German - VDE
    Learn More
    €57.53

  • DIN EN IEC 60068-3-3 VDE 0468-3-3:2018-12

    Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments (IEC 104/806/CDV:2018); German and English version prEN IEC 60068-3-3:2018
    12/1/2018 - Paper - German - VDE
    Learn More
    €45.89

  • PD CEN/TS 16637-1:2018

    Construction products. Assessment of release dangerous substances Guidance for the determination leaching tests and additional testing steps
    10/17/2018 - PDF - English - BSI
    Learn More
    €284.40

  • 18/30384604 DC:2018

    BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) stock shape material. Material specification
    10/16/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30384546 DC:2018

    BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
    10/16/2018 - PDF - English - BSI
    Learn More
    €23.70

  • CEN/TS 16637-1:2018

    Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps
    10/12/2018 - PDF - German - NBN
    Learn More
    €105.00

  • CEN/TS 16637-1:2018

    Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps
    10/12/2018 - PDF - English - NBN
    Learn More
    €105.00

  • 18/30384143 DC:2018

    BS EN 3155-002. Aerospace series. Electrical contacts used in elements of connection Part 002. List and utilization
    10/3/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN EN IEC 60068-3-6 VDE 0468-3-6:2018-10

    Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (IEC 60068-3-6:2018); German version EN IEC 60068-3-6:2018 + AC:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €61.54

  • DIN EN IEC 60068-3-5 VDE 0468-3-5:2018-10

    Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers (IEC 60068-3-5:2018); German version EN IEC 60068-3-5:2018
    10/1/2018 - Paper - German - VDE
    Learn More
    €57.53

  • UNE-EN IEC 60721-2-4:2018

    Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature (Endorsed by Asociación Española de Normalización in October of 2018.)
    10/1/2018 - PDF - English - AENOR
    Learn More
    €63.00

  • BS EN 60068-2-10:2005+A1:2018

    Environmental testing Tests. Test J and guidance: Mould growth
    9/21/2018 - PDF - English - BSI
    Learn More
    €253.59

  • 18/30382971 DC:2018

    BS EN 60068-3-7. Environmental testing Part 3-7. Supporting documentation and guidance. Measurements in temperature chambers for tests A B (with load)
    9/14/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30383421 DC:2018

    BS EN 2213. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Bars. De = 16 mm. 980 MPa = Rm = 1 180 MPa
    9/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30383422 DC:2018

    BS EN 2252. Aerospace series. Steel 15CrMoV6 (1.7334). 1 080 MPa = Rm = 1 250 MPa. Forgings. De = 100 mm
    9/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30383423 DC:2018

    BS EN 3523. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Bar for machining. De = 100 mm. 1 080 MPa = Rm = 1 280 MPa
    9/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30383424 DC:2018

    BS EN 3524. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheet and strip. 2 mm = a = 6 mm. 1 080 MPa = Rm = 1 280 MPa
    9/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30383425 DC:2018

    BS EN 3525. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Plate. 6 mm < a = 20 mm. 1 080 MPa = Rm = 1 280 MPa
    9/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30383426 DC:2018

    BS EN 3526. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm = a = 6 mm. 980 MPa = Rm = 1 180 MPa
    9/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN 60068-2-74:2000+A1:2018

    Environmental testing Tests. Test Xc: Fluid contamination
    9/11/2018 - PDF - English - BSI
    Learn More
    €215.67

  • 18/30383179 DC:2018

    BS EN 3207. Aerospace series. Rubber compounds. Technical specification
    9/7/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN EN 60068-2-58 VDE 0468-2-58:2018-09

    Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (IEC 60068-2-58:2015 + A1:2017); German version EN 60068-2-58:2015 + A1:2018
    9/1/2018 - Paper - German - VDE
    Learn More
    €98.49

  • ASTM D5744-18

    Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
    9/1/2018 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM D5744-18 + Redline

    Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
    9/1/2018 - PDF - English - ASTM
    Learn More
    €80.00

  • NF EN IEC 60721-2-4, C20-000-2-4 (08/2018)

    Classification of environmental conditions - Part 2-4 : environmental conditions appearing in nature - Solar radiation and temperature - Classification des conditions d'environnement - Partie 2-4 : Conditions d'environnement présentes dans la nature - Rayonnement solaire et température
    8/1/2018 - Paper - French - AFNOR
    Learn More
    €78.60

  • DIN EN IEC 60068-2-52 VDE 0468-2-52:2018-08

    Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) (IEC 60068-2-52:2017); German version EN IEC 60068-2-52:2018
    8/1/2018 - Paper - German - VDE
    Learn More
    €61.54

  • UNE-EN 60068-2-74:1999/A1:2018

    Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 60068-2-10:2005/A1:2018

    Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €28.00

  • 18/30381685 DC:2018

    BS EN 4878-001. Aerospace series. Polytetrafluoroethylene (PTFE) Part 001. Moulded
    7/31/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30381687 DC:2018

    BS EN 4878-002. Aerospace series. Polytetrafluoroethylene (PTFE) Part 002. Ram extruded
    7/31/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30381688 DC:2018

    BS EN 4878-003. Aerospace series. Polytetrafluoroethylene (PTFE) Part 003. Paste extruded
    7/31/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30380573 DC:2018

    BS EN 2854-003. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C 260°C Part 003. Product standard
    7/9/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN EN 60068-2-85 VDE 0468-2-85:2018-07

    Environmental testing - Part 2-85: Tests - Test Fj: Vibration, long time history replication (IEC 104/788/CDV:2018); German and English version prEN 60068-2-85:2018
    7/1/2018 - Paper - German - VDE
    Learn More
    €22.72

  • 18/30380201 DC:2018

    BS EN 2002-001. Aerospace series. Metallic materials. Test methods Part 001. Tensile testing at ambient temperature
    6/29/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30378983 DC:2018

    BS EN 60068-2-70. Environmental testing Part 2-70. Tests. Test Xb. Abrasion of markings and letterings caused by rubbing fingers hands
    6/28/2018 - PDF - English - BSI
    Learn More
    €23.70

  • IEC 60721-2-4 (2018-06)

    IEC 60721-2-4:2018 Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
    6/22/2018 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 60721-2-4 Redline version (2018-06)

    IEC 60721-2-4:2018 RLV Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
    6/22/2018 - PDF - English - IEC
    Learn More
    €92.00

  • NF EN 60068-2-10/A1, C20-710/A1 (06/2018)

    Environmental testing - Part 2-10 : tests - Test J and guidance : Mould growth - Essais d'environnement - Partie 2-10 : Essais - Essai J et guide : Moisissures
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €46.44

  • NF EN 60068-2-74/A1, C20-774/A1 (06/2018)

    Environmental testing - Part 2-74 : tests - Test Xc : Fluid contamination - Essais d'environnement - Partie 2 : Essais - Essai Xc : Contamination par des fluides
    6/1/2018 - Paper - French - AFNOR
    Learn More
    €64.05

  • DIN EN 60068-2-69/A1 VDE 0468-2-69/A1:2018-06

    Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method (IEC 91/1499/CD:2018); Text in German und English
    6/1/2018 - Paper - German - VDE
    Learn More
    €16.21

  • ASTM E698-18

    Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
    6/1/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • ASTM E698-18 + Redline

    Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
    6/1/2018 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM D6677-18

    Standard Test Method for Evaluating Adhesion by Knife
    6/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM D6677-18 + Redline

    Standard Test Method for Evaluating Adhesion by Knife
    6/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • UNE-EN IEC 60068-2-5:2018

    Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (Endorsed by Asociación Española de Normalización in June of 2018.)
    6/1/2018 - PDF - English - AENOR
    Learn More
    €71.00

  • UNE-EN IEC 60721-2-7:2018

    Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora (Endorsed by Asociación Española de Normalización in June of 2018.)
    6/1/2018 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN IEC 60068-3-6:2018/AC:2018-05

    Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in June of 2018.)
    6/1/2018 - PDF - English - AENOR
    Learn More
    €0.00

  • BS EN IEC 60068-3-6:2018

    Environmental testing Supporting documentation and guidance. Confirmation of the performance temperature/ humidity chambers
    5/31/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN IEC 60068-2-5:2018

    Environmental testing Tests. Test S. Simulated solar radiation at ground level and guidance for weathering
    5/25/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS EN 60068-2-58:2015+A1:2018

    Environmental testing Tests. Test Td: methods for solderability, resistance to dissolution of metallization and soldering heat surface mounting devices (SMD)
    5/21/2018 - PDF - English - BSI
    Learn More
    €284.40

  • 18/30377548 DC:2018

    BS EN 3381. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MOS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/ 315°C
    5/10/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30377533 DC:2018

    BS EN 4496. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification 1 100 MPa (at ambient temperature) / 315°C
    5/10/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30377532 DC:2018

    BS EN 4013. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification 1 550 MPa (at ambient temperature) / 600°C
    5/10/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30377546 DC:2018

    BS EN 4613. Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series
    5/10/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30377547 DC:2018

    BS EN 4614. Aerospace series. Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, wide series. Dimensions and loads. Inch series
    5/10/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30377544 DC:2018

    BS EN 2755. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
    5/10/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN EN 60068-2-69 Berichtigung 1 VDE 0468-2-69 Berichtigung 1:2018-05

    Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method (IEC 60068-2-69:2017/COR1:2018); German version EN 60068-2-69:2017/AC:2018-03
    5/1/2018 - Paper - German - VDE
    Learn More
    €0.00

  • NF EN IEC 60068-2-5, C20-700-2-5 (05/2018)

    Environmental testing - Part 2-5 : tests - Test S : simulated solar radiation at ground level and guidance for solar radiation testing and weathering - Essais d'environnement - Partie 2-5 : Essais - Essai S : Rayonnement solaire simulé au niveau du sol et recommandations pour les essais de rayonnement solaire et le vieillissement
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €91.99

  • NF EN IEC 60721-2-7, C20-000-2-7 (05/2018)

    Classification des conditions d'environnement - Partie 2-7 : conditions d'environnement présentes dans la nature - Faune et flore
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €74.67

  • UNE-EN IEC 60721-3-1:2018

    Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and their severities - Storage (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN IEC 60721-3-2:2018

    Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their severities - Transportation and Handling (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN IEC 60068-3-5:2018

    Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN IEC 60068-3-6:2018

    Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €68.00

  • UNE-EN 60068-2-58:2015/A1:2018

    Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) (Endorsed by Asociación Española de Normalización in May of 2018.)
    5/1/2018 - PDF - English - AENOR
    Learn More
    €58.00

  • BS EN IEC 60721-3-1:2018

    Classification of environmental conditions groups parameters and their severities. Storage
    4/25/2018 - PDF - English - BSI
    Learn More
    €154.05

  • IEC 60068-2-10 Edition 6.1 (2018-04)

    IEC 60068-2-10:2005+AMD1:2018 consolidated version Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
    4/25/2018 - PDF - English, French - IEC
    Learn More
    €284.00

  • IEC 60068-2-74 Edition 1.1 (2018-04)

    IEC 60068-2-74:1999+AMD1:2018 consolidated version Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
    4/25/2018 - PDF - English, French - IEC
    Learn More
    €122.00

  • IEC 60068-2-10 AMD 1 (2018-04)

    IEC 60068-2-10:2005/AMD1:2018 Amendment 1 - Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
    4/25/2018 - PDF - English, French - IEC
    Learn More
    €10.00

  • IEC 60068-2-74 AMD 1 (2018-04)

    IEC 60068-2-74:1999/AMD1:2018 Amendment 1 - Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
    4/25/2018 - PDF - English, French - IEC
    Learn More
    €20.00

  • 18/30376600 DC:2018

    BS EN 4700-002. Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Part 002. Bar section
    4/18/2018 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30376449 DC:2018

    BS EN 3373-001. Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors Part 001. Technical specification
    4/17/2018 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN 60068-3-5:2018

    Environmental testing Supporting documentation and guidance. Confirmation of the performance temperature chambers
    4/13/2018 - PDF - English - BSI
    Learn More
    €215.67

  • IEC 60068-2-5 Redline version (2018-04)

    IEC 60068-2-5:2018 RLV Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
    4/6/2018 - PDF - English - IEC
    Learn More
    €192.00

Items 1 to 200 of 1100 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6