19 : Testing
-
NBN EN ISO 23243:2021
Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
1/27/2021 - PDF - English - NBN
Learn More€37.00 -
BS EN IEC 61010-2-202:2021
Safety requirements for electrical equipment measurement, control and laboratory use Particular electrically operated valve actuators
1/22/2021 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 61083-3:2021
Instruments and software used for measurement in high-voltage high-current tests Requirements hardware with alternating direct voltages currents
1/22/2021 - PDF - English - BSI
Learn More€293.00 -
21/30427171 DC:2021
BS EN IEC 62475 AMD1. High-current test techniques. Definitions and requirements for test currents and measuring systems
1/22/2021 - PDF - English - BSI
Learn More€24.00 -
IEC 62899-302-3:2021
IEC 62899-302-3:2021 Printed electronics - Part 302-3: Equipment - Inkjet - Imaging-based measurement of drop direction
1/21/2021 - PDF - English - IEC
Learn More€132.00 -
BS ISO 23865:2021
Non-destructive testing. Ultrasonic testing. General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
1/20/2021 - PDF - English - BSI
Learn More€331.00 -
BS EN 62052-31:2016
Electricity metering equipment (AC). General requirements, tests and test conditions Product safety requirements
1/14/2021 - PDF - English - BSI
Learn More€449.00 -
NF X50-144-3 (01/2021)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 3 : implementation of the tailoring process in mechanical environment
1/1/2021 - Paper - French - AFNOR
Learn More€154.50 -
NF EN 300019-2-3, Z87-019-2-3 (01/2021)
Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3 : specification of environmental tests-Stationary use at weatherprotected locations (V2.5.1) - Ingénierie de l'environnement (EE) - Conditions d'environnement et essais d'environnement des équipements de télécommunication - Partie 2-3 : Spécification des essais environnementaux - Utilisation à poste fixe sur des sites protégés contre les intempéries.
1/1/2021 - Paper - French - AFNOR
Learn More€108.33 -
NF EN IEC 61083-3, C41-083-3 (01/2021)
Instruments and software used for measurement in high-voltage and high current tests - Part 3 : requirements for hardware for tests with alternating and direct voltages and currents
1/1/2021 - Paper - French - AFNOR
Learn More€116.33 -
NF EN IEC 61010-2-202, C42-020-2-202 (01/2021)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
1/1/2021 - Paper - French - AFNOR
Learn More€88.33 -
UNE-EN 50699:2020
Recurrent Tests of Electrical Equipment (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€75.00 -
UNE-EN IEC 60112:2020
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Endorsed by Asociación Española de Normalización in January of 2021.)
1/1/2021 - PDF - English - AENOR
Learn More€71.00 -
DIN 66136-4:2021-01
Determination of the degree of dispersion of metals using chemisorption - Part 4: Static-gravimetric method
1/1/2021 - PDF - German - DIN
Learn More€72.80 -
BS EN IEC 60112:2020
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
12/11/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 23243:2020
Non-destructive testing. Ultrasonic testing with arrays. Vocabulary
12/9/2020 - PDF - English - BSI
Learn More€250.00 -
20/30368187 DC:2020
BS EN 61010-2-061 AMD1. Safety requirements for electrical equipment measurement, control and laboratory use Part 2-061. Particular atomic spectrometers with thermal atomization ionization
12/4/2020 - PDF - English - BSI
Learn More€24.00 -
20/30419181 DC:2020
BS EN IEC 61010-2-011 AMD AA. Safety requirements for electrical equipment measurement, control, and laboratory use Part 2-011. Particular refrigerating
12/3/2020 - PDF - English - BSI
Learn More€24.00 -
NF EN ISO 23243, A09-023 (12/2020)
Non-destructive testing - Ultrasonic testing with arrays - Vocabulary - Essais non-destructifs - Terminologie - Termes utilisés pour le contrôle par ultrasons en multi-éléments
12/1/2020 - Paper - French - AFNOR
Learn More€75.50 -
ASTM E114-20
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
12/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E114-20 + Redline
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
12/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM E3168-20a
Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
12/1/2020 - PDF - English - ASTM
Learn More€54.00 -
ASTM E3168-20a + Redline
Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters
12/1/2020 - PDF - English - ASTM
Learn More€65.00 -
ASTM E1165-20
Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
12/1/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM E1165-20 + Redline
Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
12/1/2020 - PDF - English - ASTM
Learn More€68.00 -
ASTM E1114-20
Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources
12/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E1114-20 + Redline
Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources
12/1/2020 - PDF - English - ASTM
Learn More€61.00 -
DIN 54115-6:2020-12
Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources for gamma-radiography - Part 6: Inspection, servicing and functional testing of radiation apparatus
12/1/2020 - PDF - German - DIN
Learn More€72.80 -
DVGW W 113:2020-12
Dimensioning of Gravel Pack Material for Well Construction
12/1/2020 - PDF - German - DVGW
Learn More€109.93 -
IEC 61083-3:2020
IEC 61083-3:2020 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
11/25/2020 - PDF - English, French - IEC
Learn More€270.00 -
BS ISO 22290:2020
Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
11/19/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 21432:2020
Non-destructive testing. Standard test method for determining residual stresses by neutron diffraction
11/19/2020 - PDF - English - BSI
Learn More€348.00 -
NBN EN ISO 22232-3:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
11/19/2020 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 22232-3:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
11/19/2020 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 22232-3:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
11/19/2020 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 19430:2020
Particle size analysis — Particle tracking analysis (PTA) method ISO 19430:2016
11/19/2020 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 15901-1:2020
Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 1: Mercury porosimetry ISO 15901-1:2016
11/19/2020 - PDF - English - NBN
Learn More€121.00 -
BS EN ISO 16526-3:2020 + Redline
Tracked Changes. Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Spectrometric method
11/12/2020 - PDF - English - BSI
Learn More€235.00 -
IEC 61010-2-202:2020
IEC 61010-2-202:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
11/5/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 61010-2-202:2020 + Redline
IEC 61010-2-202:2020 (Redline version) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
11/5/2020 - PDF - English - IEC
Learn More€120.00 -
BS EN ISO 22232-3:2020
Non-destructive testing. Characterization and verification of ultrasonic test equipment Combined
11/3/2020 - PDF - English - BSI
Learn More€180.00 -
NF EN 300019-2-8, Z87-019-2-8 (11/2020)
Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-8 : specification of environmental tests - Stationary use at underground locations (V2.2.1)
11/1/2020 - Paper - French - AFNOR
Learn More€54.50 -
ASTM G92-20
Standard Practice for Characterization of Atmospheric Test Sites
11/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM G92-20 + Redline
Standard Practice for Characterization of Atmospheric Test Sites
11/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM E104-20a
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
11/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E104-20a + Redline
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
11/1/2020 - PDF - English - ASTM
Learn More€61.00 -
NAS 410:2020 + A2:2022
NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
10/30/2020 - PDF sécurisé - English - NAS
Learn More€93.00 -
NAS 410:2020 + A2:2022 + Redline
NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
10/30/2020 - PDF sécurisé - English - NAS
Learn More€100.00 -
IEC 60112:2020
IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
10/28/2020 - PDF - English, French - IEC
Learn More€173.00 -
IEC 60112:2020 CMV
IEC 60112:2020 CMV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
10/28/2020 - PDF - English - IEC
Learn More€259.00 -
NBN EN ISO 21432:2020
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
10/22/2020 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 21432:2020
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
10/22/2020 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 21432:2020
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
10/22/2020 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 22232-2:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
10/22/2020 - PDF - French - NBN
Learn More€184.00 -
NBN EN ISO 22232-2:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
10/22/2020 - PDF - English - NBN
Learn More€184.00 -
BS ISO 15900:2020
Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
10/22/2020 - PDF - English - BSI
Learn More€377.00 -
NBN ISO 18747-1:2020
Determination of particle density by sedimentation methods — Part 1: Isopycnic interpolation approach ISO 18747-1:2018
10/22/2020 - PDF - English - NBN
Learn More€142.00 -
BS ISO 17867:2020
Particle size analysis. Small angle X-ray scattering (SAXS)
10/9/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN 6111:2020
Aerospace series. Ethylene-propylene elastomer (EPM/EPDM). Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application. Material standard
10/7/2020 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 22232-2:2020
Non-destructive testing. Characterization and verification of ultrasonic test equipment Probes
10/6/2020 - PDF - English - BSI
Learn More€348.00 -
BS ISO 14411-2:2020
Preparation of particulate reference materials Polydisperse spherical particles
10/2/2020 - PDF - English - BSI
Learn More€250.00 -
ASTM E177-20
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
10/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E177-20 + Redline
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
10/1/2020 - PDF - English - ASTM
Learn More€61.00 -
UNE-EN IEC 60068-3-7:2020
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) (Endorsed by Asociación Española de Normalización in October of 2020.)
10/1/2020 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN IEC 61788-26:2020
Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors (Endorsed by Asociación Española de Normalización in October of 2020.)
10/1/2020 - PDF - English - AENOR
Learn More€72.00 -
NF EN ISO 22232-3, A09-320-3 (10/2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3 : combined equipment - Essais non destructifs
10/1/2020 - Paper - French - AFNOR
Learn More€60.67 -
ASTM E2980-20
Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
10/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E2980-20 + Redline
Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
10/1/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM E2776-20
Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
10/1/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM E2776-20 + Redline
Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
10/1/2020 - PDF - English - ASTM
Learn More€68.00 -
UNE-EN 60068-2-64:2009/A1:2020
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
9/30/2020 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 60068-2-64:2009/A1:2020
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
9/30/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN IEC 62892:2020
Extended thermal cycling of PV modules - Test procedure
9/30/2020 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN IEC 62892:2020
Extended thermal cycling of PV modules - Test procedure
9/30/2020 - PDF - English - AENOR
Learn More€84.00 -
NBN EN ISO 22232-1:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
9/23/2020 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 22232-1:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
9/23/2020 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 22232-1:2020
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
9/23/2020 - PDF - English - NBN
Learn More€163.00 -
NBN ISO 19835:2020
Non-destructive testing ? Acoustic emission testing ? Steel structures of overhead travelling cranes and portal bridge cranes
9/23/2020 - PDF - French - NBN
Learn More€89.00 -
NBN ISO 19835:2020
Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes ISO 19835:2018
9/23/2020 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 18251-1:2020
Non-destructive testing — Infrared thermography — Part 1: Characteristics of system and equipment ISO 18251-1:2017
9/23/2020 - PDF - English - NBN
Learn More€58.00 -
ASTM E2149-20
Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
9/15/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E2149-20 + Redline
Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
9/15/2020 - PDF - English - ASTM
Learn More€61.00 -
BS EN IEC 60068-3-7:2020
Environmental testing Supporting documentation and guidance. Measurements in temperature chambers for tests A (Cold) B (Dry heat) (with load)
9/4/2020 - PDF - English - BSI
Learn More€180.00 -
DIN EN 60068-2-64 VDE 0468-2-64:2020-09
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance (IEC 60068-2-64:2008 + A1:2019), German version EN 60068-2-64:2008 + A1:2019
9/1/2020 - Paper - German - VDE
Learn More€111.28 -
NF EN ISO 22232-2, A09-320-2 (09/2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2 : probes
9/1/2020 - Paper - French - AFNOR
Learn More€130.50 -
NF EN ISO 21432, A09-610 (09/2020)
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction
9/1/2020 - Paper - French - AFNOR
Learn More€119.00 -
DIN EN ISO 16526-2:2020-09
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011), German version EN ISO 16526-2:2020
9/1/2020 - PDF - German - DIN
Learn More€59.63 -
DIN EN ISO 16526-1:2020-09
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011), German version EN ISO 16526-1:2020
9/1/2020 - PDF - German - DIN
Learn More€45.98 -
DIN EN ISO 16526-3:2020-09
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011), German version EN ISO 16526-3:2020
9/1/2020 - PDF - German - DIN
Learn More€59.63 -
NBN ISO 16838:2020
Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures ISO 16838:2019
8/27/2020 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 16837:2020
Non-destructive testing — Acoustic emission testing — Test method for damage qualification of reinforced concrete beams ISO 16837:2019
8/27/2020 - PDF - English - NBN
Learn More€37.00 -
NBN ISO 16836:2020
Non-destructive testing — Acoustic emission testing — Measurement method for acoustic emission signals in concrete ISO 16836:2019
8/27/2020 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 13320:2020
Particle size analysis — Laser diffraction methods ISO 13320:2020
8/27/2020 - PDF - English - NBN
Learn More€184.00 -
NBN ISO 18747-2:2020
Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach ISO 18747-2:2019
8/27/2020 - PDF - English - NBN
Learn More€121.00 -
BS EN IEC 63180:2020
Methods of measurement and declaration of the detection range of detectors. Passive infrared detectors for major and minor motion detection
8/26/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 22232-1:2020 + Redline
Tracked Changes. Non-destructive testing. Characterization and verification of ultrasonic test equipment Instruments
8/26/2020 - PDF - English - BSI
Learn More€432.00 -
PD ISO/TR 22814:2020
Good practice for dynamic light scattering (DLS) measurements
8/24/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 22232-1:2020
Non-destructive testing. Characterization and verification of ultrasonic test equipment Instruments
8/19/2020 - PDF - English - BSI
Learn More€331.00 -
ASTM E1237-20
Standard Guide for Installing Bonded Resistance Strain Gages
8/15/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E1237-20 + Redline
Standard Guide for Installing Bonded Resistance Strain Gages
8/15/2020 - PDF - English - ASTM
Learn More€61.00 -
BS EN IEC 61788-26:2020
Superconductivity Critical current measurement. DC critical of RE-Ba-Cu-O composite superconductors
8/13/2020 - PDF - English - BSI
Learn More€293.00 -
20/30394773 DC:2020
BS IEC 61010-2-203. Safety requirements for electrical equipment measurement, control and laboratory use Part 2-203. Particular industrial communication circuits port interconnection
8/7/2020 - PDF - English - BSI
Learn More€24.00 -
VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges
8/1/2020 - PDF - English, German - VDI
Learn More€89.84 -
NF EN IEC 60068-3-7, C20-403-7 (08/2020)
Environmental testing - Part 3-7 : supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
8/1/2020 - Paper - French - AFNOR
Learn More€72.00 -
PR NF EN 4860, L17-030PR (08/2020)
Série aérospatiale - Essais d'environnement - Essai Xb : Abrasion de marquages, inscriptions, surfaces et matériaux due au frottement des doigts et des mains.
8/1/2020 - Paper - English, French - AFNOR
Learn More€80.50 -
UNE-EN IEC 60721-3-0:2020
Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More€59.00 -
NF EN ISO 22232-1, A09-320-1 (08/2020)
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1 : instruments
8/1/2020 - Paper - French - AFNOR
Learn More€108.33 -
NBN ISO 22412:2020
Particle size analysis — Dynamic light scattering (DLS) ISO 22412:2017
7/29/2020 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 21501-4:2020
Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces ISO 21501-4:2018
7/29/2020 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 21501-3:2020
Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter ISO 21501-3:2019
7/29/2020 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 21501-2:2020
Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter ISO 21501-2:2019
7/29/2020 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 20998-3:2020
Measurement and characterization of particles by acoustic methods — Part 3: Guidelines for non-linear theory ISO 20998-3:2017
7/29/2020 - PDF - English - NBN
Learn More€121.00 -
€348.00
-
UNE-EN ISO 14096-2:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
7/22/2020 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 14096-2:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
7/22/2020 - PDF - English - AENOR
Learn More€63.60 -
UNE-EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
7/22/2020 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
7/22/2020 - PDF - English - AENOR
Learn More€55.20 -
UNE-EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
7/22/2020 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
7/22/2020 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
7/22/2020 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
7/22/2020 - PDF - English - AENOR
Learn More€69.60 -
IEC 60068-3-7:2020
IEC 60068-3-7:2020 Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
7/7/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 60068-3-7:2020 + Redline
IEC 60068-3-7:2020 (Redline version) Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
7/7/2020 - PDF - English - IEC
Learn More€120.00 -
BS EN IEC 60721-3-0:2020
Classification of environmental conditions groups parameters and their severities. Introduction
7/2/2020 - PDF - English - BSI
Learn More€151.00 -
BS ISO 23159:2020
Non-destructive testing. Gamma ray scanning method on process columns
7/2/2020 - PDF - English - BSI
Learn More€293.00 -
VDI/VDE 2631 Blatt 11:2020-07
Form measurement - Spectral analysis (Fourier analysis, harmonic analysis)
7/1/2020 - PDF - English, German - VDI
Learn More€62.04 -
UNE-EN IEC 61010-2-010:2020
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN IEC 61010-2-081:2020
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€63.00 -
ASTM E803-20
Standard Test Method for Determining theL/D , Ratio of Neutron Radiography Beams
7/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E803-20 + Redline
Standard Test Method for Determining theL/D , Ratio of Neutron Radiography Beams
7/1/2020 - PDF - English - ASTM
Learn More€61.00 -
DIN 54113-3:2020-07
Non-destructive testing - Radiation protection rules for the technical application of X-ray equipment up to 1 MV - Part 3: Formulas and diagrams for the calculation of radiation protection for X-ray equipment up to 600 kV
7/1/2020 - PDF - German - DIN
Learn More€92.62 -
UNE-EN ISO 12718:2020
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
7/1/2020 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN ISO 12718:2020
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
7/1/2020 - PDF - English - AENOR
Learn More€98.40 -
UNE-EN ISO 14096-1:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
7/1/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 14096-1:2020
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
7/1/2020 - PDF - English - AENOR
Learn More€81.60 -
€101.00
-
NF EN 933-2, P18-622-2 (07/2020)
Tests for geometrical properties of aggregates - Part 2 : determination of particle size distribution - Test sieves, nominal size of apertures
7/1/2020 - Paper - French - AFNOR
Learn More€34.67 -
BS IEC 62899-505:2020
Printed electronics Quality assessment. Flexible gas sensor. Mechanical and thermal testing
6/24/2020 - PDF - English - BSI
Learn More€180.00 -
UNE-EN 61010-1:2011/A1:2020
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
6/17/2020 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 61010-1:2011/A1:2020
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
6/17/2020 - PDF - English - AENOR
Learn More€99.60 -
ASTM D6205-20
Standard Practice for Calibration of the James Static Coefficient of Friction Machine
6/15/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM D6205-20 + Redline
Standard Practice for Calibration of the James Static Coefficient of Friction Machine
6/15/2020 - PDF - English - ASTM
Learn More€61.00 -
ASTM E2445/E2445M-20
Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
6/15/2020 - PDF - English - ASTM
Learn More€74.00 -
ASTM E2445/E2445M-20 + Redline
Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems
6/15/2020 - PDF - English - ASTM
Learn More€87.00 -
IEC 61788-26:2020
IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors
6/11/2020 - PDF - English, French - IEC
Learn More€219.00 -
UNE-CEN ISO/TS 25107:2020
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
6/10/2020 - PDF - Spanish - AENOR
Learn More€153.00 -
UNE-CEN ISO/TS 25107:2020
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
6/10/2020 - PDF - English - AENOR
Learn More€183.60 -
ASTM D6624-20
Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
6/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM D6624-20 + Redline
Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
6/1/2020 - PDF - English - ASTM
Learn More€61.00 -
NF EN IEC 60721-3-0, C20-003-0 (06/2020)
Classification of environmental conditions - Part 3-0 : classification of groups of environmental parameters and their severities - Introduction - Classification des conditions d'environnement. Partie 3 : classification des groupements des agents d'environnement et de leurs sévérités - Introduction
6/1/2020 - Paper - French - AFNOR
Learn More€72.00 -
ASTM E251-20a
Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
6/1/2020 - PDF - English - ASTM
Learn More€74.00 -
ASTM E251-20a + Redline
Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
6/1/2020 - PDF - English - ASTM
Learn More€87.00 -
VDA 236-150:2020-06
Penetrant Testing for Surface Crack Detection on Car Parts
6/1/2020 - PDF - English, German - VDA
Learn More€200.00 -
ASTM E999-20
Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
6/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E999-20 + Redline
Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
6/1/2020 - PDF - English - ASTM
Learn More€61.00 -
DIN 54115-1:2020-06
Non-destructive testing - Radiation protection rules for the technical application of sealed radioactive sources for gamma-radiography - Part 1: Handling, organization and transport
6/1/2020 - PDF - German - DIN
Learn More€72.80 -
BS 10176:2020
Taking soil samples for determination of volatile organic compounds (VOCs). Specification
5/29/2020 - PDF - English - BSI
Learn More€348.00 -
BS EN IEC 61010-2-081:2020
Safety requirements for electrical equipment measurement, control and laboratory use Particular automatic semi-automatic analysis other purposes
5/29/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN IEC 61010-2-010:2020
Safety requirements for electrical equipment measurement, control and laboratory use Particular the heating of materials
5/29/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN 7010:2020
Aerospace series. Configuration. Definition and designation for product standards for externally threaded fasteners
5/19/2020 - PDF - English - BSI
Learn More€293.00 -
IEC 61010-2-040:2020
IEC 61010-2-040:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
5/14/2020 - PDF - English, French - IEC
Learn More€270.00 -
IEC 61010-2-040:2020 + Redline
IEC 61010-2-040:2020 (Redline version) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
5/14/2020 - PDF - English - IEC
Learn More€352.00 -
PD IEC TR 63212:2020
Harmonization of environmental performance criteria for electrical and electronic products. Feasibility study
5/13/2020 - PDF - English - BSI
Learn More€293.00 -
IEC 60721-3-0:2020
IEC 60721-3-0:2020 Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction
5/7/2020 - PDF - English, French - IEC
Learn More€46.00 -
IEC TR 63212:2020
IEC TR 63212:2020 Harmonization of environmental performance criteria for electrical and electronic products - Feasibility study
5/7/2020 - PDF - English - IEC
Learn More€270.00 -
PD IEC TR 62131-7:2020
Environmental conditions. Vibration and shock of electrotechnical equipment Transportation by rotary wing aircraft
5/5/2020 - PDF - English - BSI
Learn More€348.00 -
UNE-EN IEC 60068-2-85:2019
Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More€70.00 -
NF EN IEC 61010-2-081, C42-020-2-081 (05/2020)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes - Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-081 : Exigences particulières pour les appareils de laboratoire, automatiques et semi-automatiques, destinés à l'analyse et autres usages
5/1/2020 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 61010-2-010, C42-020-2-010 (05/2020)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials - Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010 : Exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières
5/1/2020 - Paper - French - AFNOR
Learn More€103.33 -
€150.00
-
NBN EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
4/29/2020 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
4/29/2020 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 16526-2:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
4/29/2020 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
4/29/2020 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 16526-1:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
4/29/2020 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
4/29/2020 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
4/29/2020 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 16526-3:2020
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
4/29/2020 - PDF - English - NBN
Learn More€37.00 -
IEC TR 62131-7:2020
IEC TR 62131-7:2020 Environmental conditions – Vibration and shock of electrotechnical equipment - Part 7: Transportation by rotary wing aircraft
4/28/2020 - PDF - English - IEC
Learn More€345.00 -
UNE-EN ISO 16809:2020
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
4/22/2020 - PDF - Spanish - AENOR
Learn More€90.00 -
UNE-EN ISO 16809:2020
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
4/22/2020 - PDF - English - AENOR
Learn More€108.00 -
PD IEC TR 63141:2020
Damp heat, steady state (unsaturated pressurized vapour with air)
4/16/2020 - PDF - English - BSI
Learn More€348.00 -
IEC TR 63141:2020
IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
4/9/2020 - PDF - English - IEC
Learn More€345.00 -
VDA 236-101:2020-04
Requirements and boundary conditions for the use of X-ray computed tomography in the automotive industry
4/1/2020 - PDF - English, German - VDA
Learn More€150.00 -
20/30403864 DC:2020
BS EN 61010-031 AMD AA. Safety requirements for electrical equipment measurement, control and laboratory use Part 031. hand-held probe assemblies measurement test
3/25/2020 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 16526-3:2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Spectrometric method
3/24/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 14096-1:2020
Non-destructive testing. Qualification of radiographic film digitisation systems Definitions, quantitative measurements image quality parameters, standard reference and qualitative control
3/19/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 16526-1:2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Voltage divider method
3/19/2020 - PDF - English - BSI
Learn More€151.00 -
BS EN ISO 16526-2:2020
Non-destructive testing. Measurement and evaluation of the X-ray tube voltage Constancy check by thick filter method
3/19/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 14096-2:2020
Non-destructive testing. Qualification of radiographic film digitisation systems Minimum requirements
3/19/2020 - PDF - English - BSI
Learn More€151.00 -
ASTM D6243/D6243M-20
Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
3/15/2020 - PDF - English - ASTM
Learn More€57.00 -
ASTM D6243/D6243M-20 + Redline
Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
3/15/2020 - PDF - English - ASTM
Learn More€68.00 -
20/30415103 DC:2020
BS EN IEC 60068-2-11. Basic environmental testing procedures Part 2-11. Tests. Test Ka. Salt mist
3/13/2020 - PDF - English - BSI
Learn More€24.00 -
20/30415081 DC:2020
BS EN 60947-9-2. Low-voltage switchgear and controlgear. Active arc-fault mitigation systems Part 9-2. Optical-based internal arc-detection devices
3/12/2020 - PDF - English - BSI
Learn More€24.00 -
SAE J 1361:2020-03-04
Hot Plate Method for Evaluating Heat Resistance and Thermal Insulation Properties of Materials
3/4/2020 - PDF - English - SAE
Learn More€54.00 -
VDI/VDE 2631 Blatt 9:2020-03
Form measurement - Examples for measurement and analysis conditions
3/1/2020 - PDF - English, German - VDI
Learn More€72.31 -
PR NF EN IEC 61010-2-020, C42-020-2-020PR (03/2020)
Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-020 : Exigences particulières pour centrifugeuses de laboratoire
3/1/2020 - Paper - English, French - AFNOR
Learn More€107.50 -
NF EN ISO 14096-1, A09-252-1 (03/2020)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1 : definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
3/1/2020 - Paper - French - AFNOR
Learn More€60.50 -
NF EN ISO 14096-2, A09-252-2 (03/2020)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2 : minimum requirements
3/1/2020 - Paper - French - AFNOR
Learn More€34.50 -
NF EN ISO 16526-1, A09-230-1 (03/2020)
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1 : voltage divider method
3/1/2020 - Paper - French - AFNOR
Learn More€25.50