Call 01 40 02 03 05

Currency:
EUR
 
 
English
 
All
 

17.160 : Vibrations, shock and vibration measurements

80 Item(s)

Set Ascending Direction
per page

List  Grid 

  • PR NF ISO 20816-2/A1, E90-780-2/A1PR (02/2024)

    PR NF ISO 20816-2/A1, E90-780-2/A1PR (02/2024)

    Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 2 : turbines à gaz, turbines à vapeur et alternateurs à paliers à film fluide excédant 40 MW pour applications terrestres, avec des vitesses nominales de fonctionnement de 1 500 r/min, 1 800 r/min, 3 000 r/min et 3 600 r/min - Amendement 1
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €45.00

  • XP ISO/TS 15230-2, E90-010-2 (03/2023)

    XP ISO/TS 15230-2, E90-010-2 (03/2023)

    Vibrations et chocs mécaniques - Forces de couplage à l'interface homme-machine en cas de vibrations transmises par les mains - Partie 2 : évaluation des forces de couplage
    3/1/2023 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF ISO 20816-3, E90-780-3 (01/2023)

    NF ISO 20816-3, E90-780-3 (01/2023)

    Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 3 : Machines industrielles avec une puissance nominale supérieure à 15 kW et une vitesse de fonctionnement comprise entre 120 r/min et 30 000 r/min
    1/1/2023 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN ISO 10819/A2, E90-701/A2 (10/2022)

    NF EN ISO 10819/A2, E90-701/A2 (10/2022)

    Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2
    10/1/2022 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF ISO 22266-1, E90-800-1 (07/2022)

    NF ISO 22266-1, E90-800-1 (07/2022)

    Mechanical vibration - Torsional vibration of rotating machinery - Part 1 : Evaluation of steam and gas turbine generator sets due to electrical excitation
    7/1/2022 - Paper - French - AFNOR
    Learn More
    €108.33

  • NF ISO 13373-4, E90-373-4 (01/2022)

    NF ISO 13373-4, E90-373-4 (01/2022)

    Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 4 : techniques de diagnostic pour turbines à gaz et turbines à vapeur à paliers à film fluide
    1/1/2022 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF ISO 18436-1, E90-408-1 (11/2021)

    NF ISO 18436-1, E90-408-1 (11/2021)

    Condition monitoring and diagnostics of machine systems - Requirements for certification of personnel - Part 1 : Sector specific requirements for certification bodies and the certification process
    11/1/2021 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF ISO 15230-1, E90-010-1 (10/2021)

    NF ISO 15230-1, E90-010-1 (10/2021)

    Vibrations et chocs mécaniques - Forces de couplage à l'interface homme-machine en cas de vibrations transmises par les mains - Partie 1 : mesurage et évaluation
    10/1/2021 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF ISO 13091-1/A2, E90-406-1/A2 (10/2021)

    NF ISO 13091-1/A2, E90-406-1/A2 (10/2021)

    Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1 : Methods of measurement at the fingertips - Amendment 2
    10/1/2021 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN ISO 8041-2, E90-403-2 (06/2021)

    NF EN ISO 8041-2, E90-403-2 (06/2021)

    Réponse des individus aux vibrations - Appareillage de mesure - Partie 2 : instruments de mesure de l'exposition des personnes aux vibrations
    6/1/2021 - Paper - French - AFNOR
    Learn More
    €130.50

  • NF E90-455 (10/2020)

    NF E90-455 (10/2020)

    Human exposure to vibration - Tools for hammering - Test methods for evaluation of shock and vibration transmission at the handle
    10/1/2020 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF ISO 13373-5, E51-016-5 (09/2020)

    NF ISO 13373-5, E51-016-5 (09/2020)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 5 : diagnostic techniques for fans and blowers
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF ISO 19283, E90-018 (08/2020)

    NF ISO 19283, E90-018 (08/2020)

    Condition monitoring and diagnostics of machines - Hydroelectric generating units
    8/1/2020 - Paper - French - AFNOR
    Learn More
    €144.67

  • NF ISO 18434-2, E90-013-2 (08/2019)

    NF ISO 18434-2, E90-013-2 (08/2019)

    Condition monitoring and diagnostics of machine systems - Thermography - Part 2 : image interpretation and diagnostics - Surveillance et diagnostic de l'état des machines - Thermographie - Partie 2 : Interprétation d'image et diagnostic
    8/1/2019 - Paper - French - AFNOR
    Learn More
    €86.67

  • FD CEN ISO/TR 19664, E90-452 (06/2019)

    FD CEN ISO/TR 19664, E90-452 (06/2019)

    Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €60.50

  • NF EN ISO 10819/A1, E90-701/A1 (02/2019)

    NF EN ISO 10819/A1, E90-701/A1 (02/2019)

    Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF ISO 20816-5, E90-780-5 (12/2018)

    NF ISO 20816-5, E90-780-5 (12/2018)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 5 : machine sets in hydraulic power generating and pump-storage plants
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €130.67

  • NF ISO 20816-4, E90-780-4 (12/2018)

    NF ISO 20816-4, E90-780-4 (12/2018)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 4 : gas turbines in excess of 3 MW, with fluid-film bearings
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €83.50

  • NF E90-020-3 (12/2018)

    NF E90-020-3 (12/2018)

    Mechanical vibrations and shocks - Measurement and evaluation methods - Part 3 : Measurement and evaluation of vibration exposure of individuals living or temporarily staying inside a construction
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF ISO 20816-8, E90-780-8 (12/2018)

    NF ISO 20816-8, E90-780-8 (12/2018)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 8 : reciprocating compressor systems
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €99.00

  • NF EN IEC 60034-14, C51-124 (10/2018)

    NF EN IEC 60034-14, C51-124 (10/2018)

    Rotating electrical machines - Part 14 : mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity - Machines électriques tournantes - Partie 14 : Vibrations mécaniques de certaines machines de hauteur d'axe supérieure ou égale à 56 mm - Mesurage, évaluation et limites de l'intensité vibratoire.
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €88.33

  • NF ISO 18095, E90-375 (05/2018)

    NF ISO 18095, E90-375 (05/2018)

    Condition monitoring and diagnostics of power transformers
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €115.12

  • NF ISO 17359, E90-831 (04/2018)

    NF ISO 17359, E90-831 (04/2018)

    Condition monitoring and diagnostics of machines - General guidelines
    4/1/2018 - Paper - French - AFNOR
    Learn More
    €96.12

  • XP ISO/TS 14837-31, E90-011-31 (02/2018)

    XP ISO/TS 14837-31, E90-011-31 (02/2018)

    Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 31 : guideline on field measurements for the evaluation of human exposure in buildings
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €104.50

  • NF ISO 13373-9, E90-373-9 (01/2018)

    NF ISO 13373-9, E90-373-9 (01/2018)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 9 : Diagnostic techniques for electric motors
    1/1/2018 - Paper - French - AFNOR
    Learn More
    €86.50

  • NF ISO 13373-7, E90-373-7 (11/2017)

    NF ISO 13373-7, E90-373-7 (11/2017)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 7 : diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €86.50

  • NF ISO 8528-9, E37-309 (10/2017)

    NF ISO 8528-9, E37-309 (10/2017)

    Reciprocating internal combustion engine driven alternating current generating sets - Part 9 : measurement and evaluation of mechanical vibrations
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 20816-2, E90-780-2 (10/2017)

    NF ISO 20816-2, E90-780-2 (10/2017)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 2 : Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min - Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 2 : Turbines à gaz, turbines à vapeur et alternateurs à paliers à film fluide excédant 40 MW pour applications terrestres, avec des vitesses nominales de fonctionnement de 1 500 r/min, 1 800 r/min, 3 000 r/min
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €83.85

  • NF EN ISO 8041-1, E90-403-1 (07/2017)

    NF EN ISO 8041-1, E90-403-1 (07/2017)

    Human response to vibration - Measuring instrumentation - Part 1 : general purpose vibration meters
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €173.34

  • NF ISO 20283-5, E90-972-5 (03/2017)

    NF ISO 20283-5, E90-972-5 (03/2017)

    Mechanical vibration - Measurement of vibration on ships - Part 5 : guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €60.50

  • NF ISO 2017-3, E90-012-3 (03/2016)

    NF ISO 2017-3, E90-012-3 (03/2016)

    Mechanical vibration and shock - Resilient mounting systems - Part 3 : technical information to be exchanged for application of vibration isolation to new buildings
    3/1/2016 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF ISO 13373-3, E90-373-3 (12/2015)

    NF ISO 13373-3, E90-373-3 (12/2015)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3 : guidelines for vibration diagnosis - Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 3 : lignes directrices pour le diagnostic
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €104.50

  • NF E90-020-2 (09/2015)

    NF E90-020-2 (09/2015)

    Mechanical vibration and shock - Measurement and evaluation methods - Part 2 : vibrations generated within sensitive equipment or and inside structures
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF E90-020-1 (09/2015)

    NF E90-020-1 (09/2015)

    Mechanical vibration and shock - Measurement and evaluation methods - Part 1 : measurement and evaluation methods of structures response to vibrations generated by human activities - Vibrations et chocs mécaniques - Méthode de mesurage et d'évaluation des réponses des constructions, des matériels sensibles et des occupants
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN ISO 5349-2/A1, E90-402-2/A1 (09/2015)

    NF EN ISO 5349-2/A1, E90-402-2/A1 (09/2015)

    Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2 : practical guidance for measurement at the workplace - Amendment 1 - Vibrations mécaniques
    9/1/2015 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF ISO 10816-21, E90-760-21 (06/2015)

    NF ISO 10816-21, E90-760-21 (06/2015)

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 21 : horizontal axis wind turbines with gearbox
    6/1/2015 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 2017-2, E90-012-2 (11/2014)

    NF ISO 2017-2, E90-012-2 (11/2014)

    Mechanical vibration and shock - Resilient mounting systems - Part 2 : technical information to be exchange for the application of vibration isolation associated with railway systems
    11/1/2014 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 10055, E90-971 (08/2014)

    NF ISO 10055, E90-971 (08/2014)

    Mechanical vibration - Vibration testing requirements for shi^pboard equipment and machinery components
    8/1/2014 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF ISO 18436-7, E90-408-7 (05/2014)

    NF ISO 18436-7, E90-408-7 (05/2014)

    Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 7 : thermography - Surveillance et diagnostic d'état des machines
    5/1/2014 - Paper - French - AFNOR
    Learn More
    €75.50

  • NF ISO 18436-4, E90-408-4 (03/2014)

    NF ISO 18436-4, E90-408-4 (03/2014)

    Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 4 : field lubricant analysis - Surveillance et diagnostic d'état des machines
    3/1/2014 - Paper - French - AFNOR
    Learn More
    €73.23

  • FD ISO/TR 19201, E90-080 (09/2013)

    FD ISO/TR 19201, E90-080 (09/2013)

    Mechanical vibration - Methodology for selecting appropriate machinery vibration standards - Vibrations mécaniques
    9/1/2013 - Paper - French - AFNOR
    Learn More
    €99.00

  • NF ISO 18436-8, E90-408-8 (07/2013)

    NF ISO 18436-8, E90-408-8 (07/2013)

    Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 8 : ultrasound - Surveillance et diagnostic d'état des machines
    7/1/2013 - Paper - French - AFNOR
    Learn More
    €60.50

  • NF ISO 4548-7, E37-400-7 (06/2013)

    NF ISO 4548-7, E37-400-7 (06/2013)

    Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7 : vibration fatigue test
    6/1/2013 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF ISO 18436-3, E90-408-3 (01/2013)

    NF ISO 18436-3, E90-408-3 (01/2013)

    Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 3 : requirements for training bodies and the training process - Surveillance et diagnostic d'état des machines
    1/1/2013 - Paper - French - AFNOR
    Learn More
    €73.00

  • NF ISO 10816-7, E90-760-7 (04/2011)

    NF ISO 10816-7, E90-760-7 (04/2011)

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7 : rotodynamic pumps for industrial applications, including measurements on rotating shafts - Vibrations mécaniques
    4/1/2011 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF ISO 14694/A1, E51-004/A1 (03/2011)

    NF ISO 14694/A1, E51-004/A1 (03/2011)

    Industrial fans - Specifications for balance quality and vibration levels - Amendment 1 - Ventilateurs industriels
    3/1/2011 - Paper - French - AFNOR
    Learn More
    €25.50

  • NF EN 1915-3/IN1, E54-001-3/IN1 (12/2010)

    NF EN 1915-3/IN1, E54-001-3/IN1 (12/2010)

    Aircraft ground support equipment - General requirements - Part 3 : vibration measurement methods and reduction - Matériels au sol pour aéronefs
    12/1/2010 - Paper - English, French - AFNOR
    Learn More
    €23.00

  • NF EN 1915-3+A1, E54-001-3 (12/2010)

    NF EN 1915-3+A1, E54-001-3 (12/2010)

    Aircraft ground support equipment - General requirements - Part 3 : vibration measurement methods and reduction - Matériels au sol pour aéronefs
    12/1/2010 - Paper - English, French - AFNOR
    Learn More
    €98.00

  • NF EN 4662, L70-200 (09/2010)

    NF EN 4662, L70-200 (09/2010)

    Aerospace series - Test specification for vibration control components - Série aérospatiale
    9/1/2010 - Paper - English, French - AFNOR
    Learn More
    €78.50

  • NF EN ISO 28927-9, E90-321-9 (08/2010)

    NF EN ISO 28927-9, E90-321-9 (08/2010)

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9 : scaling hammars and needle scalers - Machines à moteur portatives
    8/1/2010 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN ISO 28927-6, E90-321-6 (08/2010)

    NF EN ISO 28927-6, E90-321-6 (08/2010)

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6 : rammers - Machines à moteur portatives
    8/1/2010 - Paper - French - AFNOR
    Learn More
    €73.23

  • NF ISO 13091-1/A1, E90-406-1/A1 (07/2010)

    NF ISO 13091-1/A1, E90-406-1/A1 (07/2010)

    Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1 : methods of measurement at the fingertips - Amendment 1 - Vibrations mécaniques
    7/1/2010 - Paper - French - AFNOR
    Learn More
    €25.50

  • NF EN 1032/IN1, E90-453/IN1 (01/2009)

    NF EN 1032/IN1, E90-453/IN1 (01/2009)

    Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value - Vibrations mécaniques
    1/1/2009 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN 13490+A1, E90-411 (01/2009)

    NF EN 13490+A1, E90-411 (01/2009)

    Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration - Vibrations mécaniques
    1/1/2009 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF EN 1032+A1, E90-453 (01/2009)

    NF EN 1032+A1, E90-453 (01/2009)

    Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value - Vibrations mécaniques
    1/1/2009 - Paper - French - AFNOR
    Learn More
    €86.67

  • FD CEN/TS 15730, E58-071 (10/2008)

    FD CEN/TS 15730, E58-071 (10/2008)

    Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufactures - Engins de terrassement
    10/1/2008 - Paper - French - AFNOR
    Learn More
    €90.00

  • NF EN 13059/IN1, H96-313/IN1 (10/2008)

    NF EN 13059/IN1, H96-313/IN1 (10/2008)

    Safety of industrial trucks - Test methods for measuring vibration - Sécurité des chariots de manutention
    10/1/2008 - Paper - French - AFNOR
    Learn More
    €25.67

  • NF EN 13059+A1, H96-313 (10/2008)

    NF EN 13059+A1, H96-313 (10/2008)

    Safety of industrial trucks - Test methods for measuring vibration - Sécurité des chariots de manutention
    10/1/2008 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF ISO 13374-2, E90-374-2 (10/2007)

    NF ISO 13374-2, E90-374-2 (10/2007)

    Condition monitoring and diagnostics of machines - Data processing, communication, and presentation - Part 2 : data processing - Surveillance et diagnostic d'état des machines
    10/1/2007 - Paper - French - AFNOR
    Learn More
    €99.33

  • FD CEN/TR 15172-2, E90-412-2 (03/2006)

    FD CEN/TR 15172-2, E90-412-2 (03/2006)

    Whole-body vibration - Guidelines for vibration hazards reduction - Part 2 : management measures at the workplace - Vibrations globales du corps
    3/1/2006 - Paper - French - AFNOR
    Learn More
    €99.00

  • NF ISO 2017-1, E90-012-1 (12/2005)

    NF ISO 2017-1, E90-012-1 (12/2005)

    Mechanical vibration and shock - Resilient mounting systems - Part 1 : technical information to be exchange for the application of isolation systems - Vibrations et chocs mécaniques
    12/1/2005 - Paper - French - AFNOR
    Learn More
    €86.67

  • FD CEN ISO/TS 15694, E90-694 (06/2004)

    FD CEN ISO/TS 15694, E90-694 (06/2004)

    Mechanical vibration and shock - Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system - Vibrations et chocs mécaniques
    6/1/2004 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF ISO 13374-1, E90-374-1 (07/2003)

    NF ISO 13374-1, E90-374-1 (07/2003)

    Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1 : general guidelines - Surveillance et diagnostic d'état des machines
    7/1/2003 - Paper - French - AFNOR
    Learn More
    €86.67

  • FD P94-447-1 (06/2003) (R2013)

    FD P94-447-1 (06/2003) (R2013)

    Rock - Guidelines for measurement of ground vibrations due to geotechnical works - Part 1 : vibration from blasting - Roches
    6/1/2003 - Paper - French - AFNOR
    Learn More
    €86.67

  • FD P94-447-2 (06/2003) (R2013)

    FD P94-447-2 (06/2003) (R2013)

    Rock - Guidelines for measurement of ground vibrations due to geotechnical works - Part 2 : vibration from mechanical appliances - Roches
    6/1/2003 - Paper - French - AFNOR
    Learn More
    €86.67

  • NF EN ISO 5349-2, E90-402-2 (12/2001)

    NF EN ISO 5349-2, E90-402-2 (12/2001)

    Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2 : practical guidance for measurement in the workplace - Vibrations mécaniques
    12/1/2001 - Paper - French - AFNOR
    Learn More
    €119.00

  • E90-350-19 (07/1994) (R2004)

    E90-350-19 (07/1994) (R2004)

    Methods for the calibration and shock pick-ups. Part 19 : testing of magnetic field sensivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-8 (07/1994) (R2004)

    E90-350-8 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 8 : primary calibration by dual centrifuge.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €60.67

  • E90-350-17 (07/1994) (R2004)

    E90-350-17 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 17 : testing of fixed temperature sensitivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-12 (07/1994) (R2004)

    E90-350-12 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 12 : testing of transverse shock sensitivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-13 (07/1994) (R2004)

    E90-350-13 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 13 : testing of base strain sensitivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-14 (07/1994) (R2004)

    E90-350-14 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 14 : resonance frequency testing of undamped accelerometers on a steel block.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-16 (07/1994) (R2004)

    E90-350-16 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 16 : testing of mounting torque sensitivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-15 (07/1994) (R2004)

    E90-350-15 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 15 : testing of acoustic sensitivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-7 (07/1994) (R2004)

    E90-350-7 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 7 : primary calibration by centrifuge.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €60.67

  • E90-350-18 (07/1994) (R2004)

    E90-350-18 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 18 : testing of transient temperature sensitivity.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €48.00

  • E90-350-1 (07/1994) (R2004)

    E90-350-1 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 1 : primary vibration calibration by laser interferometry.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €86.50

  • E90-350-10 (07/1994) (R2004)

    E90-350-10 (07/1994) (R2004)

    Methods for the calibration of vibration and shock pick-ups. Part 10 : primary calibration by high impact shocks.
    7/1/1994 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF E90-230 (03/1982) (R2012)

    NF E90-230 (03/1982) (R2012)

    Auxiliary tables for vibration generators. Methods of describing characteristics.
    3/1/1982 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF E90-210 (09/1978) (R2013)

    NF E90-210 (09/1978) (R2013)

    Electrodynamic test equipment for generating vibration. Methods of describing the characteristics of the equipment.
    9/1/1978 - Paper - French - AFNOR
    Learn More
    €108.33

80 Item(s)

Set Ascending Direction
per page

List  Grid 

Shop By

Currently Shopping by:

  1. Published by: AFNOR Remove This Item
Clear All

Shopping Options

Document type
  1. Amendment draft (1)
  2. National directive (3)
  3. Norms amendments (6)
  4. Standard (70)

NORMADOC - Your purchasing center for standards regulations & technical and legal books

Useful information
Customer service
logo Normadoc certifié ISO 9001

© 2023 Normadoc . Tous droits réservés - All Rights Reserved.

To top
Cookie Preferences
Your Privacy

When you visit any website, it may store or retrieve information on your browser, usually in the form of cookies. This information does not usually identify you, but it does help companies to learn how their users are interacting with the site.

We respect your right to privacy, so you can choose not to accept some of these cookies. Choose from the different category headers to find out more and change your default settings.

Strictly Necessary Cookies
These cookies are essential for the website to function and they cannot be turned off. They are usually only set in response to actions made by you on our site, such as logging in, adding items to your cart or filling in forms. If you browse our website, you accept these cookies.
Cookies are used by
  • Magento Store