17.160 : Vibrations, shock and vibration measurements

Items 1 to 200 of 714 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • 20/30383278 DC:2020

    BS EN ISO 10819 AMD2. Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
    5/14/2020 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN ISO 8041-2, E90-403-2PR (05/2020)


    5/1/2020 - Paper - English, French - AFNOR
    Learn More
    €138.37

  • BS ISO 19283:2020

    Condition monitoring and diagnostics of machines. Hydroelectric generating units
    4/30/2020 - PDF - English - BSI
    Learn More
    €324.69

  • BS ISO 7626-5:2019

    Mechanical vibration and shock. Experimental determination of mechanical mobility Measurements using impact excitation with an exciter which is not attached to the structure
    4/21/2020 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 14830-1:2019

    Condition monitoring and diagnostics of machine systems. Tribology-based General requirements guidelines
    4/14/2020 - PDF - English - BSI
    Learn More
    €300.99

  • 20/30385878 DC:2020

    BS ISO 13373-4. Condition monitoring and diagnostics of machines. Vibration condition Part 4. Diagnostic techniques for gas steam turbines with fluid-film bearings
    4/10/2020 - PDF - English - BSI
    Learn More
    €23.70

  • BS ISO 16063-34:2019

    Methods for the calibration of vibration and shock transducers Testing sensitivity at fixed temperatures
    4/9/2020 - PDF - English - BSI
    Learn More
    €215.67

  • PR NF E90-455, E90-455PR (03/2020)


    3/1/2020 - Paper - French - AFNOR
    Learn More
    €60.48

  • BS ISO 14839-1:2018 + Redline

    Tracked Changes. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Vocabulary
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 20816-8:2018 + Redline

    Tracked Changes. Mechanical vibration. Measurement and evaluation of machine vibration Reciprocating compressor systems
    2/27/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS ISO 17359:2018 + Redline

    Tracked Changes. Condition monitoring and diagnostics of machines. General guidelines
    2/26/2020 - PDF - English - BSI
    Learn More
    €329.67

  • BS ISO 13373-2:2016 + Redline

    Tracked Changes. Condition monitoring and diagnostics of machines. Vibration condition Processing, analysis presentation vibration data
    2/26/2020 - PDF - English - BSI
    Learn More
    €369.72

  • BS ISO 13379-2:2015 + Redline

    Tracked Changes. Condition monitoring and diagnostics of machines. Data interpretation techniques Data-driven applications
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 13381-1:2015 + Redline

    Tracked Changes. Condition monitoring and diagnostics of machines. Prognostics General guidelines
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 2041:2018 + Redline

    Tracked Changes. Mechanical vibration, shock and condition monitoring. Vocabulary
    2/26/2020 - PDF - English - BSI
    Learn More
    €391.29

  • BS ISO 10815:2016 + Redline

    Tracked Changes. Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
    2/26/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS EN IEC 60034-14:2018 + Redline

    Tracked Changes. Rotating electrical machines Mechanical vibration of certain with shaft heights 56 mm and higher. Measurement, evaluation limits severity
    2/25/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 20283-5:2016 + Redline

    Tracked Changes. Mechanical vibration. Measurement of vibration on ships Guidelines for measurement, evaluation and reporting with regard to habitability passenger merchant
    2/25/2020 - PDF - English - BSI
    Learn More
    €200.27

  • UNE-EN ISO 10819:2014/A1:2019

    Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)
    10/23/2019 - PDF - Spanish - AENOR
    Learn More
    €48.00

  • UNE-EN ISO 10819:2014/A1:2019

    Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)
    10/23/2019 - PDF - English - AENOR
    Learn More
    €57.00

  • SAE J 2834:2019-10-09

    Ride Index Structure and Development Methodology
    10/9/2019 - PDF - English - SAE
    Learn More
    €77.00

  • NF ISO 18434-2, E90-013-2 (08/2019)

    Surveillance et diagnostic de l'état des systèmes de machines - Thermographie - Partie 2 : interprétation d'image et diagnostic - Surveillance et diagnostic de l'état des machines - Thermographie - Partie 2 : Interprétation d'image et diagnostic
    8/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • BS ISO 10813-2:2019

    Vibration-generating machines. Guidance for selection Equipment dynamic structural testing
    7/16/2019 - PDF - English - BSI
    Learn More
    €215.67

  • 19/30394091 DC:2019

    BS ISO 5348. Mechanical vibration and shock. Mechanical mounting of accelerometers
    6/18/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30383016 DC:2019

    BS ISO 20816-9. Mechanical vibration. Measurement and evaluation of machine vibration Part 9. Gear units
    6/17/2019 - PDF - English - BSI
    Learn More
    €23.70

  • FD CEN ISO/TR 19664, E90-452 (06/2019)

    Réponse des individus aux vibrations - Recommandations et terminologie pour les instruments et l'équipement d'évaluation de l'exposition quotidienne aux vibrations sur le lieu de travail selon les exigences de santé et de sécurité
    6/1/2019 - Paper - French - AFNOR
    Learn More
    €51.24

  • ASTM E3213-19

    Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
    5/1/2019 - PDF - English - ASTM
    Learn More
    €47.00

  • NBN ISO 8528-9:2019

    Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations
    4/17/2019 - PDF - English - NBN
    Learn More
    €45.00

  • NBN ISO 8528-9:2019

    Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations
    4/17/2019 - PDF - French - NBN
    Learn More
    €45.00

  • BS ISO 18434-2:2019

    Condition monitoring and diagnostics of machine systems. Thermography Image interpretation
    3/27/2019 - PDF - English - BSI
    Learn More
    €253.59

  • NF ISO 2041, E90-001 (03/2019)

    Vibrations et chocs mécaniques, et leur surveillance - Vocabulaire
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €110.46

  • ISO 18434-2:2019

    Condition monitoring and diagnostics of machine systems — Thermography — Part 2: Image interpretation and diagnostics
    3/1/2019 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 18434-2:2019

    Condition monitoring and diagnostics of machine systems — Thermography — Part 2: Image interpretation and diagnostics
    3/1/2019 - Paper - French - ISO
    Learn More
    €123.00

  • PR NF ISO 18436-1, E90-408-1PR (03/2019)

    Surveillance et diagnostic d'état des machines - Exigences relatives à la certification du personnel - Partie 1 : Exigences spécifiques au secteur relatives aux organismes de certification et au mode opératoire d'évaluation
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €69.44

  • PR NF ISO 19283, E90-018PR (03/2019)

    Surveillance et diagnostic d'état des machines - Groupes de production hydroélectrique
    3/1/2019 - Paper - English, French - AFNOR
    Learn More
    €138.37

  • BS EN ISO 10819:2013+A1:2019

    Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
    2/19/2019 - PDF - English - BSI
    Learn More
    €253.59

  • NF EN ISO 10819/A1, E90-701/A1 (02/2019)

    Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 - Vibrations et chocs mécaniques - Vibrations main-bras - Mesurage et évaluation du facteur de transmission des vibrations par les gants à la paume de la main - AMENDEMENT 1
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €40.69

  • ASTM D7400/D7400M-19

    Standard Test Methods for Downhole Seismic Testing
    2/1/2019 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D7400/D7400M-19 + Redline

    Standard Test Methods for Downhole Seismic Testing
    2/1/2019 - PDF - English - ASTM
    Learn More
    €62.00

  • PR NF ISO 13373-5, E51-016PR (02/2019)

    Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 5 : Techniques de diagnostic pour ventilateurs et souffleurs
    2/1/2019 - Paper - French - AFNOR
    Learn More
    €69.44

  • 19/30367919 DC:2019

    BS ISO 19283. Condition monitoring and diagnostics of machines. Hydroelectric generating units
    1/22/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30370855 DC:2019

    Condition monitoring and diagnostics of machine systems — Requirements for certification personnel Part 1: Sector specific requirements bodies the process 1.
    1/21/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30379034 DC:2019

    BS ISO 6070. Auxiliary tables for vibration generators. Methods of describing equipment characteristics
    1/3/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 18/30364118 DC:2018

    BS ISO 13373-5. Condition monitoring and diagnostics of machines. Vibration condition Part 5. Diagnostic techniques for fans blowers
    12/18/2018 - PDF - English - BSI
    Learn More
    €23.70

  • PD CEN ISO/TR 19664:2018

    Human response to vibration. Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
    12/13/2018 - PDF - English - BSI
    Learn More
    €154.05

  • CEN ISO/TR 19664:2018

    Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety (ISO/TR 19664:2017)
    12/8/2018 - PDF - German - NBN
    Learn More
    €30.00

  • CEN ISO/TR 19664:2018

    Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety (ISO/TR 19664:2017)
    12/8/2018 - PDF - English - NBN
    Learn More
    €30.00

  • CEN ISO/TR 19664:2018

    Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety (ISO/TR 19664:2017)
    12/8/2018 - PDF - French - NBN
    Learn More
    €30.00

  • DIN 45673-8:2018-12

    Mechanical vibration - Resilient elements used in railway tracks - Part 8: Laboratory test procedures for continuous elastic rail supports
    12/1/2018 - PDF - German - DIN
    Learn More
    €96.00

  • DIN ISO 20816-8:2018-12

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems (ISO 20816-8:2018)
    12/1/2018 - PDF - German - DIN
    Learn More
    €114.10

  • DIN ISO 20816-5:2018-12

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants (ISO 20816-5:2018)
    12/1/2018 - PDF - German - DIN
    Learn More
    €147.20

  • NF ISO 20816-4, E90-780-4 (12/2018)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 4 : gas turbines in excess of 3 MW, with fluid-film bearings - Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 4: Turbines à gaz à paliers à film fluide, excédant 3 MW
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF E90-020-3 (12/2018)

    Mechanical vibrations and shocks - Measurement and evaluation methods - Part 3: Measurement and evaluation of vibration exposure of individuals living or temporarily staying inside a construction - Vibrations et chocs mécaniques - Méthodes de mesurage et d'évaluation - Partie 3 : Mesurage et évaluation de l'exposition aux vibrations des individus habitant ou séjournant d'une manière temporaire à l'intérieur d'une construction
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF ISO 20816-8, E90-780-8 (12/2018)

    Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 8 : systèmes de compresseurs alternatifs
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €84.02

  • NF ISO 20816-5, E90-780-5 (12/2018)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 5 : machine sets in hydraulic power generating and pump-storage plants - Vibrations mécaniques - Mesurage et évaluation des vibrations des machines - Partie 5 : Groupes de machines équipant des centrales hydroélectriques et des stations de pompage et de stockage
    12/1/2018 - Paper - French - AFNOR
    Learn More
    €110.46

  • 18/30366863 DC:2018

    BS ISO 14830-1. Condition monitoring and diagnostics of machine systems. Tribology-based Part 1. General guidelines
    11/13/2018 - PDF - English - BSI
    Learn More
    €23.70

  • BS EN IEC 60034-14:2018

    Rotating electrical machines Mechanical vibration of certain with shaft heights 56 mm and higher. Measurement, evaluation limits severity
    11/13/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 16063-44:2018

    Methods for the calibration of vibration and shock transducers Calibration field calibrators
    11/5/2018 - PDF - English - BSI
    Learn More
    €154.05

  • 18/30376778 DC:2018

    BS ISO 16063-34. Methods for the calibration of vibration and shock transducers Part 34. Testing sensitivity at fixed temperatures
    11/5/2018 - PDF - English - BSI
    Learn More
    €23.70

  • DIN EN ISO 28927-8/A2:2018-11

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2 (ISO 28927-8:2009/DAM 2:2018); German and English version EN ISO 28927-8:2009/prA2:2018
    11/1/2018 - PDF - English, German - DIN
    Learn More
    €47.60

  • ISO 16063-44:2018

    Methods for the calibration of vibration and shock transducers — Part 44: Calibration of field vibration calibrators
    11/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • BS ISO 14839-1:2018

    Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Vocabulary
    10/17/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 2041:2018

    Mechanical vibration, shock and condition monitoring. Vocabulary
    10/11/2018 - PDF - English - BSI
    Learn More
    €300.99

  • NF EN IEC 60034-14, C51-124 (10/2018)

    Rotating electrical machines - Part 14 : mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity - Machines électriques tournantes - Partie 14 : Vibrations mécaniques de certaines machines de hauteur d'axe supérieure ou égale à 56 mm - Mesurage, évaluation et limites de l'intensité vibratoire.
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €74.67

  • ISO 2041:2018

    Mechanical vibration, shock and condition monitoring — Vocabulary
    10/1/2018 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2041:2018

    Mechanical vibration, shock and condition monitoring — Vocabulary
    10/1/2018 - Paper - French - ISO
    Learn More
    €40.00

  • DIN ISO 20816-4:2018-10

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings (ISO 20816-4:2018)
    10/1/2018 - - - DIN
    Learn More
    From: €96.00

  • BS ISO 20816-8:2018

    Mechanical vibration. Measurement and evaluation of machine vibration Reciprocating compressor systems
    8/15/2018 - PDF - English - BSI
    Learn More
    €253.59

  • VDI 4550 Blatt 3:2018-08

    Vibration analysis - Procedures and presentation - Multivariate methods
    8/1/2018 - PDF - German - VDI
    Learn More
    €103.22

  • ISO 20816-8:2018

    Mechanical vibration — Measurement and evaluation of machine vibration — Part 8: Reciprocating compressor systems
    8/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 20816-8:2018

    Mechanical vibration — Measurement and evaluation of machine vibration — Part 8: Reciprocating compressor systems
    8/1/2018 - Paper - French - ISO
    Learn More
    €144.00

  • BS ISO 20816-5:2018

    Mechanical vibration. Measurement and evaluation of machine vibration Machine sets in hydraulic power generating pump-storage plants
    7/24/2018 - PDF - English - BSI
    Learn More
    €300.99

  • ISO 20816-5:2018

    ISO 20816-5:2018 Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants
    7/20/2018 - PDF - English - ISO
    Learn More
    €186.00

  • ISO 20816-5:2018

    ISO 20816-5:2018 Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants
    7/20/2018 - PDF - French - ISO
    Learn More
    €186.00

  • BS EN ISO 10326-1:2016

    Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Basic requirements
    7/20/2018 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 16063-43:2015

    Methods for the calibration of vibration and shock transducers Calibration accelerometers by model-based parameter identification
    7/2/2018 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 20816-4:2018

    Mechanical vibration. Measurement and evaluation of machine vibration Gas turbines in excess 3 MW, with fluid-film bearings
    6/21/2018 - PDF - English - BSI
    Learn More
    €215.67

  • 18/30341976 DC:2018

    BS ISO 7626-5. Vibration and shock. Experimental determination of mechanical mobility Part 5. Measurements using impact excitation with an exciter which is not attached to the structure
    6/20/2018 - PDF - English - BSI
    Learn More
    €23.70

  • ISO 20816-4:2018

    Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
    6/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 20816-4:2018

    Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
    6/1/2018 - Paper - French - ISO
    Learn More
    €123.00

  • NF ISO 18095, E90-375 (05/2018)

    Condition monitoring and diagnostics of power transformers - Surveillance et diagnostic de l'état des transformateurs de puissance
    5/1/2018 - Paper - French - AFNOR
    Learn More
    €100.63

  • DIN SPEC 45673-2:2018-05

    Mechanical vibration - Resilient elements used in railway tracks - Part 2: Determination of static and dynamic characteristics in the track in situ
    5/1/2018 - PDF - German - DIN
    Learn More
    €66.10

  • DIN ISO 17359:2018-05

    Condition monitoring and diagnostics of machines - General guidelines (ISO 17359:2018)
    5/1/2018 - PDF - German - DIN
    Learn More
    €103.00

  • NF ISO 17359, E90-831 (04/2018)

    Condition monitoring and diagnostics of machines - General guidelines - Surveillance et diagnostic d'état des machines - Lignes directrices générales
    4/1/2018 - Paper - French - AFNOR
    Learn More
    €84.02

  • VDI 2065:2018-03

    Active vibration reduction
    3/1/2018 - PDF - German - VDI
    Learn More
    €112.06

  • DIN ISO 13373-9:2018-03

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 9: Diagnostic techniques for electric motors (ISO 13373-9:2017)
    3/1/2018 - - - DIN
    Learn More
    From: €96.00

  • BS ISO 17359:2018

    Condition monitoring and diagnostics of machines. General guidelines
    2/19/2018 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 21984:2018

    Ships and marine technology. Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
    2/19/2018 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 29821:2018

    Condition monitoring and diagnostics of machines. Ultrasound. General guidelines, procedures and validation
    2/6/2018 - PDF - English - BSI
    Learn More
    €253.59

  • DIN 45672-1:2018-02

    Vibration measurement associated with railway traffic systems - Part 1: Measuring method for vibration
    2/1/2018 - PDF - German - DIN
    Learn More
    €108.80

  • VDI 3843 Blatt 1:2018-02

    Modelling of vibrating systems
    2/1/2018 - PDF - English, German - VDI
    Learn More
    €160.29

  • XP ISO/TS 14837-31, E90-011-31 (02/2018)

    Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 31 : guideline on field measurements for the evaluation of human exposure in buildings - Vibrations mécaniques - Vibrations et bruits initiés au sol dus à des lignes ferroviaires - Partie 31 : lignes directrices de mesurages in situ pour l'évaluation de l'exposition des individus dans les bâtiments
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €91.50

  • ISO 21984:2018

    Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
    2/1/2018 - Paper - English - ISO
    Learn More
    €61.00

  • DIN ISO 13379-1:2018-02

    Condition monitoring and diagnostics of machines - Data interpretation and diagnostics techniques - Part 1: General guidelines (ISO 13379-1:2012)
    2/1/2018 - - - DIN
    Learn More
    From: €108.80

  • BS ISO 7919-3:2009+A1:2017

    Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts Coupled industrial machines
    1/23/2018 - PDF - English - BSI
    Learn More
    €154.05

  • PD ISO/TS 14837-31:2017

    Mechanical vibration. Ground-borne noise and vibration arising from rail systems Guideline on field measurements for the evaluation of human exposure in buildings
    1/5/2018 - PDF - English - BSI
    Learn More
    €284.40

  • NF ISO 13373-9, E90-373-9 (01/2018)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 9 : Diagnostic techniques for electric motors - Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 9 : Techniques de diagnostic pour moteurs électriques
    1/1/2018 - Paper - French - AFNOR
    Learn More
    €73.30

  • DIN EN 61373 Berichtigung 1 VDE 0115-106 Berichtigung 1:2018-01

    Railway applications - Rolling stock equipment - Shock and vibration tests (IEC 61373:2010/COR1:2011); German version EN 61373:2010/AC:2017-09
    1/1/2018 - Paper - German - VDE
    Learn More
    €0.00

  • ISO 17359:2018

    Condition monitoring and diagnostics of machines — General guidelines
    1/1/2018 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 17359:2018

    Condition monitoring and diagnostics of machines — General guidelines
    1/1/2018 - Paper - French - ISO
    Learn More
    €144.00

  • ISO 29821:2018

    Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation
    1/1/2018 - Paper - English - ISO
    Learn More
    €123.00

  • DIN ISO 7919-3:2018-01

    Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines (ISO 7919-3:2009 + Amd.1:2017)
    1/1/2018 - - - DIN
    Learn More
    From: €61.70

  • DIN ISO 10816-3:2018-01

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ (ISO 10816-3:2009 + Amd.1:2017)
    1/1/2018 - - - DIN
    Learn More
    From: €75.40

  • DIN ISO 20816-2:2018-01

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 20816-2:2017)
    1/1/2018 - - - DIN
    Learn More
    From: €96.00

  • BS ISO 18437-6:2017

    Mechanical vibration and shock. Characterization of the dynamic mechanical properties visco-elastic materials Time-temperature superposition
    12/18/2017 - PDF - English - BSI
    Learn More
    €253.59

  • ISO/TS 14837-31:2017

    Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
    12/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO/TS 14837-31:2017

    Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
    12/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • BS ISO 10816-3:2009+A1:2017

    Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Industrial machines with nominal power above 15 kW and speeds between 120 r/min 000 when measured in situ
    11/2/2017 - PDF - English - BSI
    Learn More
    €154.05

  • NF ISO 10816-3/A1, E90-760-3/A1 (11/2017)

    Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3 : industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ - Amendment 1 - Vibrations mécaniques - Évaluation des vibrations des machines par mesurages sur les parties non tournantes - Partie 3 : Machines industrielles de puissance nominale supérieure à 15 kW et de vitesse nominale de fonctionnement entre 120 r/min et 15 000 r/min, lorsqu'elles sont mesurées in situ
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €21.90

  • NF ISO 13373-7, E90-373-7 (11/2017)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 7 : diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants - Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 7 : techniques de diagnostic pour machines équipant les centrales hydro-électriques et les stations de turbine-pompe
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €73.30

  • ISO 18437-6:2017

    Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 6: Time-temperature superposition
    11/1/2017 - Paper - English - ISO
    Learn More
    €123.00

  • DIN EN ISO 28927-2:2017-11

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009 + Amd 1:2017); German version EN ISO 28927-2:2009 + A1:2017
    11/1/2017 - - - DIN
    Learn More
    From: €130.80

  • BS ISO 16063-33:2017

    Methods for the calibration of vibration and shock transducers Testing magnetic field sensitivity
    10/25/2017 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 13373-9:2017

    Condition monitoring and diagnostics of machines. Vibration condition Diagnostic techniques for electric motors
    10/25/2017 - PDF - English - BSI
    Learn More
    €215.67

  • NF ISO 20816-2, E90-780-2 (10/2017)

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 2 : Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min - Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 2: Turbines à gaz, turbines à vapeur et alternateurs à paliers à film fluide excédant 40 MW pour applications terrestres, avec des vitesses nominales de fonctionnement de 1 500 r/min, 1 800 r/min, 3 000 r/min
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF ISO 8528-9, E37-309 (10/2017)

    Reciprocating internal combustion engine driven alternating current generating sets - Part 9 : measurement and evaluation of mechanical vibrations - Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne - Partie 9 : mesurage et évaluation des vibrations mécaniques
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €64.01

  • ISO 13373-9:2017

    Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
    10/1/2017 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 13373-9:2017

    Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
    10/1/2017 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 16063-33:2017

    Methods for the calibration of vibration and shock transducers — Part 33: Testing of magnetic field sensitivity
    10/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • BS ISO 13373-7:2017

    Condition monitoring and diagnostics of machines. Vibration condition Diagnostic techniques for machine sets in hydraulic power generating pump-storage plants
    9/19/2017 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 20816-2:2017

    Mechanical vibration. Measurement and evaluation of machine vibration Land-based gas turbines, steam turbines generators in excess 40 MW, with fluid-film bearings rated speeds 1 500 r/min, 800 3 000 r/min 600
    9/15/2017 - PDF - English - BSI
    Learn More
    €215.67

  • ISO 13373-7:2017

    Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
    8/1/2017 - Paper - English - ISO
    Learn More
    €123.00

  • ISO 13373-7:2017

    Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
    8/1/2017 - Paper - French - ISO
    Learn More
    €123.00

  • ISO 10816-3:2009/Amd 1:2017

    Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1
    8/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 10816-3:2009/Amd 1:2017

    Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1
    8/1/2017 - Paper - French - ISO
    Learn More
    €17.00

  • BS ISO 8528-9:2017

    Reciprocating internal combustion engine driven alternating current generating sets Measurement and evaluation of mechanical vibrations
    7/28/2017 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 16063-45:2017

    Methods for the calibration of vibration and shock transducers In-situ with built in coil
    7/10/2017 - PDF - English - BSI
    Learn More
    €215.67

  • €43.95

  • ISO 7919-3:2009/Amd 1:2017

    Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1
    7/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 8528-9:2017

    Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
    7/1/2017 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 8528-9:2017

    Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations
    7/1/2017 - Paper - French - ISO
    Learn More
    €61.00

  • 17/30348360 DC:2017

    BS ISO 10816-8 AMD1. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Part 8. Reciprocating compressor systems
    6/8/2017 - PDF - English - BSI
    Learn More
    €23.70

  • NF EN ISO 8041-1, E90-403-1 (05/2017)

    Human response to vibration - Measuring instrumentation - Part 1 : general purpose vibration meters - Réponse des individus aux vibrations - Appareillage de mesure - Partie 1 : Instrument de mesure à usage général
    5/1/2017 - Paper - French - AFNOR
    Learn More
    €156.84

  • ISO 16063-45:2017

    Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
    5/1/2017 - Paper - English - ISO
    Learn More
    €92.00

  • VDI 4550 Blatt 1:2017-04

    Vibration analysis - Procedures and presentation of results - Terminology and basic principles
    4/1/2017 - PDF - English, German - VDI
    Learn More
    €199.94

  • 17/30341581 DC:2017

    BS ISO 29821. Condition monitoring and diagnostics of machines. Ultrasound. General guidelines, procedures and validation
    3/23/2017 - PDF - English - BSI
    Learn More
    €23.70

  • NF ISO 20283-5, E90-972-5 (03/2017)

    Mechanical vibration - Measurement of vibration on ships - Part 5 : guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships - Vibrations mécaniques - Mesurage des vibrations à bord des navires - Partie 5: Lignes directrices pour le mesurage, l'évaluation et l'établissement de rapports des vibrations affectant l'habitabilité à bord des navires de commerce et des paquebots
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €51.24

  • DIN ISO 20816-1:2017-03

    Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (ISO 20816-1:2016)
    3/1/2017 - - - DIN
    Learn More
    From: €114.10

  • BS ISO 8626:1989+A1:2016

    Servo-hydraulic test equipment for generating vibration. Method of describing characteristics
    2/28/2017 - PDF - English - BSI
    Learn More
    €284.40

  • BS ISO 15261:2004+A1:2016

    Vibration and shock generating systems. Vocabulary
    1/31/2017 - PDF - English - BSI
    Learn More
    €215.67

  • UNE-ISO 5805:2017

    Mechanical vibration and shock -- Human exposure – Vocabulary.
    1/25/2017 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • BS ISO 20283-5:2016

    Mechanical vibration. Measurement of vibration on ships Guidelines for measurement, evaluation and reporting with regard to habitability passenger merchant
    12/31/2016 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 5344:2004+A1:2016

    Electrodynamic vibration generating systems. Performance characteristics
    12/31/2016 - PDF - English - BSI
    Learn More
    €253.59

  • NF ISO 10815, E90-016 (12/2016)

    Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains - Vibrations mécaniques - Mesurage des vibrations produites à l'intérieur des tunnels ferroviaires par le passage des trains
    12/1/2016 - Paper - French - AFNOR
    Learn More
    €73.30

  • ISO 20283-5:2016

    Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
    12/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 20283-5:2016

    Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
    12/1/2016 - Paper - French - ISO
    Learn More
    €61.00

  • ISO 5344:2004/Amd 1:2016

    Electrodynamic vibration generating systems — Performance characteristics — Amendment 1
    12/1/2016 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 8626:1989/Amd 1:2016

    Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1
    12/1/2016 - Paper - English - ISO
    Learn More
    €17.00

  • ASTM E3081-16

    Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts
    12/1/2016 - PDF - English - ASTM
    Learn More
    €47.00

  • BS ISO 20816-1:2016

    Mechanical vibration. Measurement and evaluation of machine vibration General guidelines
    11/30/2016 - PDF - English - BSI
    Learn More
    €284.40

  • BS ISO 8608:2016

    Mechanical vibration. Road surface profiles. Reporting of measured data
    11/30/2016 - PDF - English - BSI
    Learn More
    €284.40

  • ISO 20816-1:2016

    Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
    11/1/2016 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 8608:2016

    Mechanical vibration — Road surface profiles — Reporting of measured data
    11/1/2016 - Paper - English - ISO
    Learn More
    €165.00

  • DIN ISO 16063-43:2016-11

    Methods for the calibration of vibration and shock transducers - Part 43: Calibration of accelerometers by model-based parameter identification (ISO 16063-43:2015)
    11/1/2016 - - - DIN
    Learn More
    From: €96.00

  • DIN ISO 13373-2:2016-11

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016)
    11/1/2016 - - - DIN
    Learn More
    From: €119.60

  • XP ISO/TS 14837-32, E90-011-32 (10/2016)

    Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 32 : measurement of dynamic properties of the ground - Vibrations mécaniques - Vibrations et bruits initiés au sol dus à des lignes ferroviaires - Partie 32 : mesurage des propriétés dynamiques du sol
    10/1/2016 - Paper - French - AFNOR
    Learn More
    €122.38

  • BS ISO 16063-32:2016

    Methods for the calibration of vibration and shock transducers Resonance testing. Testing frequency phase response accelerometers by means excitation
    9/30/2016 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 10815:2016

    Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains
    9/30/2016 - PDF - English - BSI
    Learn More
    €215.67

  • ISO 16063-32:2016

    Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation
    9/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • BS ISO 16063-1:1998+A1:2016

    Methods for the calibration of vibration and shock transducers Basic concepts
    8/31/2016 - PDF - English - BSI
    Learn More
    €215.67

  • JIS B 7758:2016

    Electrodynamic vibration generating systems - Performance characteristics
    8/22/2016 - PDF - Japanese - JSA
    Learn More
    €41.86

  • NF ISO 2954, E90-100 (08/2016)

    Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity - Vibrations mécaniques des machines tournantes ou alternatives - Exigences relatives aux appareils de mesure de l'intensité vibratoire
    8/1/2016 - Paper - French - AFNOR
    Learn More
    €64.01

  • VDI 2039 Berichtigung:2016-08

    Torsional vibration of drivelines - Calculation, measurement, reduction - Corrigendum concerning standard VDI 2039:2016-06
    8/1/2016 - PDF - English, German - VDI
    Learn More
    €0.00

  • DIN ISO 16063-21:2016-08

    Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer (ISO 16063-21:2003 + Cor. 1:2009 + Amd.1:2016)
    8/1/2016 - - - DIN
    Learn More
    From: €103.00

  • ISO 16063-1:1998/Amd 1:2016

    Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 1
    7/1/2016 - Paper - English - ISO
    Learn More
    €17.00

  • DIN EN ISO 28927-8:2016-07

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action (ISO 28927-8:2009 + Amd 1:2015); German version EN ISO 28927-8:2009 + A1:2015
    7/1/2016 - - - DIN
    Learn More
    From: €114.10

  • BS ISO 16063-17:2016

    Methods for the calibration of vibration and shock transducers Primary by centrifuge
    6/30/2016 - PDF - English - BSI
    Learn More
    €154.05

  • VDI 2039:2016-06

    Torsional vibration of drivelines - Calculation, measurement, reduction
    6/1/2016 - PDF - English, German - VDI
    Learn More
    €269.62

  • ISO 16063-17:2016

    Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
    6/1/2016 - Paper - English - ISO
    Learn More
    €61.00

  • PD CEN/TR 1030-2:2016

    Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
    5/31/2016 - PDF - English - BSI
    Learn More
    €300.99

  • NF ISO 13373-2, E90-373-2 (04/2016)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data - Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 2 : traitement, analyse et présentation des données vibratoires
    4/1/2016 - Paper - French - AFNOR
    Learn More
    €91.50

  • BS ISO 16063-21:2003+A1:2016

    Methods for the calibration of vibration and shock transducers Vibration by comparison to a reference transducer
    3/31/2016 - PDF - English - BSI
    Learn More
    €253.59

  • DIN 45661:2016-03

    Vibration measuring instrumentation - Vocabulary
    3/1/2016 - PDF - German - DIN
    Learn More
    €89.00

  • NF ISO 2017-3, E90-012-3 (03/2016)

    Mechanical vibration and shock - Resilient mounting systems - Part 3 : technical information to be exchanged for application of vibration isolation to new buildings - Vibrations et chocs mécaniques - Systèmes de montage résilients - Partie 3 : Informations techniques à échanger pour l'application d'isolation vibratoire aux bâtiments neufs
    3/1/2016 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS ISO 13373-2:2016

    Condition monitoring and diagnostics of machines. Vibration condition Processing, analysis presentation vibration data
    2/29/2016 - PDF - English - BSI
    Learn More
    €284.40

  • NF ISO 13381-1, E90-656-1 (02/2016)

    Condition monitoring and diagnostics of machines - Prognostics - Part 1 : general guidelines - Surveillance et diagnostic des machines - Pronostic - Partie 1 : lignes directrices générales
    2/1/2016 - Paper - French - AFNOR
    Learn More
    €73.30

  • ISO 16063-21:2003/Amd 1:2016

    Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 1
    2/1/2016 - Paper - English - ISO
    Learn More
    €17.00

  • PD ISO/TS 14837-32:2015

    Mechanical vibration. Ground-borne noise and vibration arising from rail systems Measurement of dynamic properties the ground
    1/31/2016 - PDF - English - BSI
    Learn More
    €300.99

  • ISO 13373-2:2016

    Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
    1/1/2016 - Paper - English - ISO
    Learn More
    €144.00

  • ISO 13373-2:2016

    Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
    1/1/2016 - Paper - French - ISO
    Learn More
    €144.00

  • BS ISO 2017-3:2015

    Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for application of isolation new buildings
    12/31/2015 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 13374-4:2015

    Condition monitoring and diagnostics of machine systems. Data processing, communication presentation Presentation
    12/31/2015 - PDF - English - BSI
    Learn More
    €154.05

  • NF ISO 13373-3, E90-373-3 (12/2015)

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3 : guidelines for vibration diagnosis - Surveillance et diagnostic d'état des machines - Surveillance des vibrations - Partie 3 : lignes directrices pour le diagnostic
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €91.50

  • ISO/TS 14837-32:2015

    Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
    12/1/2015 - Paper - English - ISO
    Learn More
    €186.00

  • ISO/TS 14837-32:2015

    Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
    12/1/2015 - Paper - French - ISO
    Learn More
    €186.00

  • ISO 13374-4:2015

    Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation
    12/1/2015 - Paper - English - ISO
    Learn More
    €40.00

  • ISO 2017-3:2015

    Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
    12/1/2015 - Paper - English - ISO
    Learn More
    €61.00

  • ISO 2017-3:2015

    Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
    12/1/2015 - Paper - French - ISO
    Learn More
    €61.00

  • ASTM E2534-15 + Redline

    Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
    12/1/2015 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM E2534-15

    Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
    12/1/2015 - PDF - English - ASTM
    Learn More
    €47.00

  • DIN EN ISO 28927-5:2015-12

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009 + Amd 1:2015); German version EN ISO 28927-5:2009 + A1:2015
    12/1/2015 - - - DIN
    Learn More
    From: €103.00

  • DIN ISO 13373-3:2015-12

    Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 3: Guidelines for vibration diagnosis (ISO 13373-3:2015)
    12/1/2015 - - - DIN
    Learn More
    From: €119.60

  • ISO 16063-43:2015

    Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification
    11/1/2015 - Paper - English - ISO
    Learn More
    €123.00

  • DIN ISO 16063-16:2015-11

    Methods for the calibration of vibration and shock transducers - Part 16: Calibration by Earth's gravitation (ISO 16063-16:2014)
    11/1/2015 - - - DIN
    Learn More
    From: €68.30

  • BS ISO 13381-1:2015

    Condition monitoring and diagnostics of machines. Prognostics General guidelines
    10/31/2015 - PDF - English - BSI
    Learn More
    €215.67

  • BS ISO 13373-3:2015

    Condition monitoring and diagnostics of machines. Vibration condition Guidelines for vibration diagnosis
    10/31/2015 - PDF - English - BSI
    Learn More
    €284.40

  • DIN EN ISO 28927-1/A1:2015-10

    Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009/DAM 1:2015); German and English version EN ISO 28927-1:2009/prA1:2015
    10/1/2015 - PDF - English, German - DIN
    Learn More
    €47.60

  • NF ISO 18436-2, E90-408-2 (10/2015)

    Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 2 : vibration condition monitoring and diagnostics - Surveillance et diagnostic d'état des machines - Exigences relatives à la qualification et l'évaluation du personnel - Partie 2 : surveillance des vibrations et diagnostic d'état des machines
    10/1/2015 - Paper - French - AFNOR
    Learn More
    €100.63

  • BS ISO 16063-16:2014

    Methods for the calibration of vibration and shock transducers Calibration by Earth’s gravitation
    9/30/2015 - PDF - English - BSI
    Learn More
    €154.05

  • SAE J 577:2015-09-02

    Vibration Test Machine and Operation Procedure
    9/2/2015 - PDF - English - SAE
    Learn More
    €77.00

Items 1 to 200 of 714 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4