17.040 : Linear and angular measurements 17 : Metrology and measurement. Physical phenomena ICS, Published by: NBN

NBN EN ISO 18183-3:2024

Spécification géométrique des produits (GPS) - Partition - Partie 3: Méthodes utilisées pour la spécification et la vérification (ISO 18183-3:2024)
2/14/2024 - PDF - French - NBN
Learn More

€142.00

NBN EN ISO 18183-2:2024

Spécification géométrique des produits (GPS) - Partition - Partie 2: Modèle nominal (ISO 18183-2:2024)
2/14/2024 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 18183-3:2024

Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
2/14/2024 - PDF - English - NBN
Learn More

€142.00

NBN EN ISO 18183-2:2024

Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024)
2/14/2024 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 4351:2023

Spécification géométrique des produits (GPS) - Association (ISO 4351:2023)
12/21/2023 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 4351:2023

Geometrical product specifications (GPS) - Association (ISO 4351:2023)
12/21/2023 - PDF - English - NBN
Learn More

€58.00

Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: Rules and general tolerances for castings using profile tolerancing in a general datum system ISO 8062-4:2023
9/22/2023 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 3611:2023

Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur (ISO 3611:2023)
6/1/2023 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 3611:2023

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
6/1/2023 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 16610-62:2023

Spécification géométrique des produits (GPS) - Filtrage - Partie 62: Filtres surfaciques linéaires : Filtres spline (ISO 16610-62:2023)
3/7/2023 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 16610-62:2023

Geometrische Produktspezifikation (GPS) - Filterung - Teil 62: Lineare Flächenfilter: Spline-Filter (ISO 16610-62:2023)
3/7/2023 - PDF - German - NBN
Learn More

€58.00

NBN EN ISO 16610-62:2023

Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023)
3/7/2023 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 8062-3:2023

Spécification géométrique des produits (GPS) - Tolérances dimensionnelles et géométriques des pièces moulées - Partie 3: Tolérances dimensionnelles et géométriques générales et surépaisseurs d'usinage pour les pièces moulées utilisant des tolérances ± pour les dimensions indiquées (ISO 8062-3:2023)
3/2/2023 - PDF - French - NBN
Learn More

€142.00

NBN EN ISO 8062-3:2023

Geometrische Produktspezifikationen (GPS) - Maß-, Form- und Lagetoleranzen für Formteile - Teil 3: Allgemeine Maß-, Form- und Lagetoleranzen und Bearbeitungszugaben für Gussstücke mit ± Toleranzen für die angegebenen Maße (ISO 8062-3:2023)
3/2/2023 - PDF - German - NBN
Learn More

€142.00

NBN EN ISO 8062-3:2023

Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
3/2/2023 - PDF - English - NBN
Learn More

€142.00

NBN EN ISO 25178-700:2023

Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 700: Étalonnage, ajustage et vérification d'instruments de mesure de la topographie des surfaces (ISO 25178-700:2022)
1/12/2023 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 25178-700:2023

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Fläche - Teil 700: Kalibrierung, Justierung und Verifizierung von flächenhaften Topographiemessgeräten (ISO 25178-700:2022)
1/12/2023 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 25178-700:2023

Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022)
1/12/2023 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 1:2022

Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
7/2/2022 - PDF - French - NBN
Learn More

€37.00

NBN EN ISO 1:2022

Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
7/2/2022 - PDF - English - NBN
Learn More

€37.00

NBN EN ISO 1:2022

Geometrische Produktspezifikation (GPS) - Standardreferenztemperatur für die Spezifikation der geometrischen und maßlichen Eigenschaften (ISO 1:2022)
7/2/2022 - PDF - German - NBN
Learn More

€37.00

CEN/TR 17792:2022

Railway Applications - Wheel-rail contact geometry parameters - Technical report and background information about EN 15302
2/11/2022 - PDF - English - NBN
Learn More

€205.00

NBN EN ISO 25178-2:2022

Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
1/22/2022 - PDF - French - NBN
Learn More

€184.00

NBN EN ISO 25178-2:2022

Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021, Corrected version 2023-11)
1/22/2022 - PDF - English - NBN
Learn More

€184.00

NBN EN ISO 25178-2:2022

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft - Teil 2: Begriffe und Kenngrößen für die Oberflächenbeschaffenheit (ISO 25178-2:2021, korrigierte Fassung 2023-11)
1/22/2022 - PDF - German - NBN
Learn More

€184.00

NBN EN ISO 12179:2022

Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
1/22/2022 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 12179:2022

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Kalibrierung von Tastschnittgeräten (ISO 12179:2021)
1/22/2022 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 21920-2:2022

Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021)
1/22/2022 - PDF - French - NBN
Learn More

€184.00

NBN EN ISO 21920-2:2022

Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
1/22/2022 - PDF - English - NBN
Learn More

€184.00

NBN EN ISO 21920-3:2022

Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
1/22/2022 - PDF - French - NBN
Learn More

€142.00

NBN EN ISO 21920-3:2022

Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
1/22/2022 - PDF - English - NBN
Learn More

€142.00

NBN EN ISO 21920-1:2022

Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
1/22/2022 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 21920-1:2022

Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
1/22/2022 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 21920-2:2022

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Profile - Teil 2: Begriffe und Kenngrößen für die Oberflächenbeschaffenheit (ISO 21920 2:2021, korrigierte Fassung 2022-06)
1/22/2022 - PDF - German - NBN
Learn More

€184.00

NBN EN ISO 21920-3:2022

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Profile - Teil 3: Spezifikationsoperatoren (ISO 21920-3:2021)
1/22/2022 - PDF - German - NBN
Learn More

€142.00

NBN EN ISO 21920-1:2022

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Profile - Teil 1: Angabe der Oberflächenbeschaffenheit (ISO 21920-1:2021)
1/22/2022 - PDF - German - NBN
Learn More

€163.00

NBN EN 16165:2021

Determination of slip resistance of pedestrian surfaces - Methods of evaluation
10/29/2021 - PDF - French - NBN
Learn More

€142.00

NBN EN 16165:2021

Determination of slip resistance of pedestrian surfaces - Methods of evaluation
10/29/2021 - PDF - German - NBN
Learn More

€142.00

NBN EN 16165:2021

Determination of slip resistance of pedestrian surfaces - Methods of evaluation
10/29/2021 - PDF - English - NBN
Learn More

€142.00

NBN EN 15302:2021

Railway applications - Wheel-rail contact geometry parameters - Definitions and methods for evaluation
10/8/2021 - PDF - French - NBN
Learn More

€205.00

NBN EN 15302:2021

Railway applications - Wheel-rail contact geometry parameters - Definitions and methods for evaluation
10/8/2021 - PDF - German - NBN
Learn More

€205.00

NBN EN 15302:2021

Railway applications - Wheel-rail contact geometry parameters - Definitions and methods for evaluation
10/8/2021 - PDF - English - NBN
Learn More

€205.00

NBN EN ISO 10360-13:2021

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
9/24/2021 - PDF - French - NBN
Learn More

€184.00

NBN EN ISO 10360-13:2021

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
9/24/2021 - PDF - English - NBN
Learn More

€184.00

NBN EN ISO 10360-13:2021

Geometrische Produktspezifikationen (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmesssysteme (KMS) - Teil 13: Optische 3D KMS (ISO 10360-13:2021)
9/24/2021 - PDF - German - NBN
Learn More

€184.00

NBN EN ISO 10360-10:2021

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
9/18/2021 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 10360-10:2021

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
9/18/2021 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 10360-10:2021

Geometrische Produktspezifikationen (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmesssysteme (KMS) - Teil 10: Lasertracker (ISO 10360 10:2021)
9/18/2021 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 22081:2021

Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
3/24/2021 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 22081:2021

Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
3/24/2021 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 22081:2021

Geometrische Produktspezifikation (GPS) - Geometrische Tolerierung - Allgemeine geometrische und Größenmaßspezifikationen (ISO 22081:2021)
3/24/2021 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 25178-72:2017/A1:2020

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
10/22/2020 - PDF - French - NBN
Learn More

€20.00

NBN EN ISO 25178-72:2017/A1:2020

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
10/22/2020 - PDF - German - NBN
Learn More

€20.00

NBN EN ISO 25178-72:2017/A1:2020

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
10/22/2020 - PDF - English - NBN
Learn More

€20.00

NBN EN ISO 13385-2:2020

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
6/25/2020 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 13385-2:2020

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
6/25/2020 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 13385-2:2020

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
6/25/2020 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 16610-29:2020

Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020)
5/27/2020 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 16610-29:2020

Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020)
5/27/2020 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 16610-29:2020

Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020)
5/27/2020 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 10360-5:2020

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
5/27/2020 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 10360-5:2020

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
5/27/2020 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 10360-5:2020

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
5/27/2020 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 21204:2020

Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
4/29/2020 - PDF - French - NBN
Learn More

€184.00

NBN EN ISO 21204:2020

Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
4/29/2020 - PDF - German - NBN
Learn More

€184.00

NBN EN ISO 21204:2020

Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
4/29/2020 - PDF - English - NBN
Learn More

€184.00

NBN EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
2/27/2020 - PDF - French - NBN
Learn More

€20.00

NBN EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
2/27/2020 - PDF - German - NBN
Learn More

€20.00

NBN EN ISO 16610-61:2015/A1:2020

Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
2/27/2020 - PDF - English - NBN
Learn More

€20.00

NBN EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - English - NBN
Learn More

€89.00

NBN EN 13036-5:2019

Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
9/25/2019 - PDF - French - NBN
Learn More

€184.00

NBN EN 13036-5:2019

Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
9/25/2019 - PDF - German - NBN
Learn More

€184.00

NBN EN 13036-5:2019

Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
9/25/2019 - PDF - English - NBN
Learn More

€184.00

NBN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - German - NBN
Learn More

€58.00

NBN EN ISO 25178-73:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 20170:2019

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
6/26/2019 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 20170:2019

Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
6/26/2019 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 25178-600:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
5/23/2019 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 25178-600:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
5/23/2019 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 25178-600:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
5/23/2019 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 25178-607:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
5/23/2019 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 25178-607:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
5/23/2019 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 25178-607:2019

Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
5/23/2019 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 14405-2:2019

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/27/2019 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 14405-2:2019

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/27/2019 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 14405-2:2019

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/27/2019 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 14978:2019

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 14978:2019

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 14978:2019

Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 5458:2018

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
7/25/2018 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 5458:2018

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
7/25/2018 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 5458:2018

Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
7/25/2018 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 14253-1:2018

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
1/30/2018 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 14253-1:2018

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
1/30/2018 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 14253-1:2018

Geometrische Produktspezifikationen (GPS) - Prüfung von Werkstücken und Messgeräten durch Messen - Teil 1: Entscheidungsregeln für den Nachweis von Konformität oder Nichtkonformität mit Spezifikationen (ISO 14253-1:2017)
1/30/2018 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - German - NBN
Learn More

€58.00

NBN EN ISO 25178-71:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 25178-72:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
7/19/2017 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 25178-72:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
7/19/2017 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 25178-72:2017

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
7/19/2017 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 1938-2:2017

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/22/2017 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 1938-2:2017

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/22/2017 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 1938-2:2017

Geometrische Produktspezifikation (GPS) - Längenprüftechnik - Teil 2: Prüflehren für Rachenlehren (ISO 1938-2:2017)
3/22/2017 - PDF - German - NBN
Learn More

€58.00

NBN EN 13523-1:2017

Coil coated metals - Test methods - Part 1: Film thickness
3/22/2017 - PDF - French - NBN
Learn More

€58.00

NBN EN 13523-1:2017

Coil coated metals - Test methods - Part 1: Film thickness
3/22/2017 - PDF - German - NBN
Learn More

€58.00

NBN EN 13523-1:2017

Coil coated metals - Test methods - Part 1: Film thickness
3/22/2017 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 8401:2017

Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017)
3/22/2017 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 8401:2017

Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017)
3/22/2017 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 8401:2017

Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017)
3/22/2017 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
3/22/2017 - PDF - French - NBN
Learn More

€205.00

NBN EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
3/22/2017 - PDF - German - NBN
Learn More

€205.00

NBN EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
3/22/2017 - PDF - English - NBN
Learn More

€205.00

NBN EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
3/22/2017 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
3/22/2017 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 1660:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
3/22/2017 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 16610-30:2017

Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
2/23/2017 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 16610-30:2017

Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
2/23/2017 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 16610-30:2017

Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
2/23/2017 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
2/23/2017 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
2/23/2017 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 14405-3:2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
2/23/2017 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 16610-28:2017

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
1/27/2017 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 16610-28:2017

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
1/27/2017 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 16610-28:2017

Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
1/27/2017 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 16610-31:2016

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/21/2016 - PDF - French - NBN
Learn More

€58.00

NBN EN ISO 16610-31:2016

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/21/2016 - PDF - German - NBN
Learn More

€58.00

NBN EN ISO 16610-31:2016

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/21/2016 - PDF - English - NBN
Learn More

€58.00

NBN EN ISO 10360-12:2016

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
11/23/2016 - PDF - French - NBN
Learn More

€163.00

NBN EN ISO 10360-12:2016

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
11/23/2016 - PDF - German - NBN
Learn More

€163.00

NBN EN ISO 10360-12:2016

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
11/23/2016 - PDF - English - NBN
Learn More

€163.00

NBN EN ISO 18391:2016

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
11/23/2016 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 18391:2016

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
11/23/2016 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 18391:2016

Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
11/23/2016 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 14405-1:2016

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/23/2016 - PDF - French - NBN
Learn More

€184.00

NBN EN ISO 14405-1:2016

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/23/2016 - PDF - German - NBN
Learn More

€184.00

NBN EN ISO 14405-1:2016

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/23/2016 - PDF - English - NBN
Learn More

€184.00

NBN EN ISO 17450-3:2016

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
7/15/2016 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 17450-3:2016

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
7/15/2016 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 17450-3:2016

Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
7/15/2016 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 25178-1:2016

Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
5/27/2016 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 25178-1:2016

Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
5/27/2016 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 25178-1:2016

Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
5/27/2016 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 3040:2016

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
5/27/2016 - PDF - French - NBN
Learn More

€121.00

NBN EN ISO 3040:2016

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
5/27/2016 - PDF - German - NBN
Learn More

€121.00

NBN EN ISO 3040:2016

Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
5/27/2016 - PDF - English - NBN
Learn More

€121.00

NBN EN ISO 1938-1:2015

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
12/24/2015 - PDF - French - NBN
Learn More

€142.00

NBN EN ISO 1938-1:2015

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
12/24/2015 - PDF - German - NBN
Learn More

€142.00

NBN EN ISO 1938-1:2015

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
12/24/2015 - PDF - English - NBN
Learn More

€142.00

NBN EN ISO 16610-60:2015

Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
12/24/2015 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 16610-60:2015

Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
12/24/2015 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 16610-60:2015

Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
12/24/2015 - PDF - English - NBN
Learn More

€89.00

NBN EN ISO 14253-5:2015

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
10/23/2015 - PDF - French - NBN
Learn More

€89.00

NBN EN ISO 14253-5:2015

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
10/23/2015 - PDF - German - NBN
Learn More

€89.00

NBN EN ISO 14253-5:2015

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
10/23/2015 - PDF - English - NBN
Learn More

€89.00