17.040 : Linear and angular measurements 17 : Metrology and measurement. Physical phenomena ICS, Published by: BSI

BS EN ISO 18183-1:2024

Geometrical product specifications (GPS). Partition Vocabulary and basic concepts
4/4/2024 - PDF - English - BSI
Learn More

€250.00

BS EN 60061-3:1993+A60:2024

Lamp caps and holders together with gauges for the control of interchangeability safety Gauges
3/28/2024 - PDF - English - BSI
Learn More

€449.00

BS EN ISO 18183-2:2024

Geometrical product specifications (GPS). Partition Nominal model
2/16/2024 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 18183-3:2024

Geometrical product specifications (GPS). Partition Methods used for specification and verification
2/16/2024 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 4351:2023

Geometrical product specifications (GPS). Association
1/5/2024 - PDF - English - BSI
Learn More

€250.00

BS ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers Part 1: Two-point micrometers. Design and metrological characteristics
1/2/2024 - PDF - English - BSI
Learn More

€24.00

PD ISO/TR 16610-32:2023 + Redline

Tracked Changes. Geometrical product specifications (GPS). Filtration Robust profile filters: Spline filters
11/3/2023 - PDF - English - BSI
Learn More

€326.00

PD ISO/TR 16610-32:2023

Geometrical product specifications (GPS). Filtration Robust profile filters: Spline filters
11/1/2023 - PDF - English - BSI
Learn More

€250.00

23/30464464 DC:2023

BS ISO 16610-21. Geometrical product specifications (GPS). Filtration Part 21. Linear profile filters: Gaussian filters
10/31/2023 - PDF - English - BSI
Learn More

€24.00

23/30463884 DC:2023

BS EN ISO 16610-31. Geometrical product specifications (GPS). Filtration Part 31. Robust profile filters. Gaussian regression filters
10/30/2023 - PDF - English - BSI
Learn More

€24.00

23/30463657 DC:2023

BS EN ISO 25178-603. Geometrical product specifications (GPS). Surface texture. Areal Part 603. Design and characteristics of non-contact (phase shifting interferometry) instruments
10/23/2023 - PDF - English - BSI
Learn More

€24.00

23/30463665 DC:2023

BS EN ISO 25178-605. Geometrical product specifications (GPS). Surface texture. Areal Part 605. Design and characteristics of non-contact (point autofocus probe) instruments
10/23/2023 - PDF - English - BSI
Learn More

€24.00

23/30463649 DC:2023

BS EN ISO 25178-601 Geometrical product specifications (GPS). Surface texture: Areal Part 601. Design and characteristics of contact (stylus) instruments
10/5/2023 - PDF - English - BSI
Learn More

€24.00

23/30463653 DC:2023

BS EN ISO 25178-602. Geometrical product specifications (GPS). Surface texture. Areal Part 602. Design and characteristics of non-contact (confocal chromatic probe) instruments
10/5/2023 - PDF - English - BSI
Learn More

€24.00

23/30463661 DC:2023

BS EN ISO 25178-604 Geometrical product specifications (GPS). Surface texture: Areal Part 604. Design and characteristics of non-contact (coherence scanning interferometry) instruments
10/5/2023 - PDF - English - BSI
Learn More

€24.00

BS ISO 199:2023 + Redline

Tracked Changes. Rolling bearings. Thrust bearings. Geometrical product specifications (GPS) and tolerance values
9/11/2023 - PDF - English - BSI
Learn More

€235.00

BS ISO 492:2023 + Redline

Tracked Changes. Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
9/7/2023 - PDF - English - BSI
Learn More

€454.00

BS ISO 199:2023

Rolling bearings. Thrust bearings. Geometrical product specifications (GPS) and tolerance values
8/31/2023 - PDF - English - BSI
Learn More

€180.00

BS ISO 492:2023

Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
8/23/2023 - PDF - English - BSI
Learn More

€348.00

23/30438188 DC:2023

BS EN ISO 5463. Geometrical product specifications (GPS). Form measuring equipment, Rotary axis form measuring instruments. Design and metrological characteristics
8/1/2023 - PDF - English - BSI
Learn More

€24.00

23/30477708 DC:2023

BS EN 13523-1. Coil coated metals. Test methods Part 1. Film thickness
7/27/2023 - PDF - English - BSI
Learn More

€24.00

BS ISO 8062-4:2023 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules general castings using profile tolerancing in a datum system
6/22/2023 - PDF - English - BSI
Learn More

€454.00

BS ISO 8062-4:2023

Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules general castings using profile tolerancing in a datum system
6/20/2023 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 3611:2023 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
6/7/2023 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 3611:2023

Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
6/2/2023 - PDF - English - BSI
Learn More

€250.00

BS EN 13523-14:2023 + Redline

Tracked Changes. Coil coated metals. Test methods Chalking (Helmen method)
3/27/2023 - PDF - English - BSI
Learn More

€197.00

BS EN 13523-14:2023

Coil coated metals. Test methods Chalking (Helmen method)
3/20/2023 - PDF - English - BSI
Learn More

€151.00

BS EN ISO 14571:2022

Metallic coatings on non-metallic basis materials. Measurement of coating thickness. Micro-resistivity method
3/20/2023 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 16610-62:2023

Geometrical product specifications (GPS). Filtration Linear areal filters: Spline filters
3/13/2023 - PDF - English - BSI
Learn More

€180.00

BS IEC 61108-6:2023

Maritime navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Navigation with Indian constellation (NavIC)/Indian regional system (IRNSS). Receiver equipment. Performance requirements, methods of testing required test results
3/10/2023 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 8062-3:2023 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional machining allowances castings using ± indicated dimensions
3/6/2023 - PDF - English - BSI
Learn More

€382.00

BS EN ISO 8062-3:2023

Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional machining allowances castings using ± indicated dimensions
3/1/2023 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 21920-2:2022

Geometrical product specifications (GPS). Surface texture: Profile Terms, definitions and surface texture parameters
2/20/2023 - PDF - English - BSI
Learn More

€377.00

BS ISO 3245:2023 + Redline

Tracked Changes. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
2/17/2023 - PDF - English - BSI
Learn More

€326.00

BS ISO 3245:2023

Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
2/14/2023 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 25178-700:2023

Geometrical product specifications (GPS). Surface texture: Areal Calibration, adjustment and verification of areal topography measuring instruments
1/25/2023 - PDF - English - BSI
Learn More

€293.00

23/30406192 DC:2023

BS EN ISO 16610-45. Geometrical product specifications (GPS). Filtration Part 45. Morphological profile filters. Segmentation
1/13/2023 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 2692:2021 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
1/4/2023 - PDF - English - BSI
Learn More

€454.00

22/30427351 DC:2022

BS EN ISO 3882. Metallic and other inorganic coatings. Review of methods of measurement of thickness
12/21/2022 - PDF - English - BSI
Learn More

€24.00

22/30449703 DC:2022

BS EN ISO 18183-1. Geometrical product specifications (GPS). Partition Part 1. Basic concepts
12/2/2022 - PDF - English - BSI
Learn More

€24.00

22/30449707 DC:2022

BS EN ISO 18183-2. Geometrical product specifications (GPS). Partitioning Part 2. Nominal model
12/1/2022 - PDF - English - BSI
Learn More

€24.00

22/30449711 DC:2022

BS EN ISO 18183-3. Geometrical product specifications (GPS). Partitioning Part 3. Methods used for specification and verification
12/1/2022 - PDF - English - BSI
Learn More

€24.00

22/30449684 DC:2022

BS EN ISO 5459:2011 AMD1. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
10/27/2022 - PDF - English - BSI
Learn More

€24.00

22/30429469 DC:2022

BS EN ISO 4351. Geometrical product specifications (GPS). Association
8/22/2022 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 9220:2022 + Redline

Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
8/7/2022 - PDF - English - BSI
Learn More

€235.00

BS EN ISO 9220:2022

Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
7/26/2022 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 1:2022 + Redline

Tracked Changes. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
7/25/2022 - PDF - English - BSI
Learn More

€235.00

BS EN ISO 1:2022

Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
7/19/2022 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 12179:2022 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
6/10/2022 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 12179:2022

Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
5/18/2022 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 21920-3:2022 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile Specification operators
3/17/2022 - PDF - English - BSI
Learn More

€382.00

BS EN ISO 21920-1:2022 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile Indication of surface texture
3/17/2022 - PDF - English - BSI
Learn More

€454.00

BS EN ISO 25178-2:2022 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Terms, definitions and surface texture parameters
3/10/2022 - PDF - English - BSI
Learn More

€492.00

PD CEN/TR 17792:2022

Railway Applications. Wheel-rail contact geometry parameters. Technical report and background information about EN 15302
3/8/2022 - PDF - English - BSI
Learn More

€377.00

BS EN 16165:2021

Determination of slip resistance of pedestrian surfaces. Methods of evaluation
2/25/2022 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 25178-2:2022

Geometrical product specifications (GPS). Surface texture: Areal Terms, definitions and surface texture parameters
2/4/2022 - PDF - English - BSI
Learn More

€377.00

BS EN ISO 21920-3:2022

Geometrical product specifications (GPS). Surface texture: Profile Specification operators
2/1/2022 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 21920-1:2022

Geometrical product specifications (GPS). Surface texture: Profile Indication of surface texture
1/25/2022 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 10360-10:2021 + Redline

Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers
12/23/2021 - PDF - English - BSI
Learn More

€454.00

BS EN 13523-7:2021 + Redline

Tracked Changes. Coil coated metals. Test methods Resistance to cracking on bending (T-bend test)
12/1/2021 - PDF - English - BSI
Learn More

€235.00

BS EN 15302:2021

Railway applications. Wheel-rail contact geometry parameters. Definitions and methods for evaluation
10/29/2021 - PDF - English - BSI
Learn More

€449.00

BS EN 13523-7:2021

Coil coated metals. Test methods Resistance to cracking on bending (T-bend test)
10/21/2021 - PDF - English - BSI
Learn More

€180.00

21/30429461 DC:2021

BS EN ISO 16610-62. Geometrical product specifications (GPS). Filtration Part 62. Linear areal filters: Spline filters
10/20/2021 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 10360-13:2021

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Optical 3D CMS
9/28/2021 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 10360-10:2021

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers
9/17/2021 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 2692:2021 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
7/2/2021 - PDF - English - BSI
Learn More

€432.00

BS EN ISO 2692:2021 ExComm - SET

Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
7/2/2021 - PDF - English - BSI
Learn More

€96.00

BS EN ISO 2692:2021 ExComm

Expert Commentary for BS EN ISO 2692:2021. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
6/30/2021 - PDF - English - BSI
Learn More

€96.00

BS EN ISO 2692:2021

Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
6/29/2021 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 1463:2021

Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
6/4/2021 - PDF - English - BSI
Learn More

€180.00

21/30423738 DC:2021

BS ISO 199. Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
5/25/2021 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 4518:2021

Metallic coatings. Measurement of coating thickness. Profilometric method
5/7/2021 - PDF - English - BSI
Learn More

€180.00

21/30378338 DC:2021

BS ENISO 10360-11. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Part 11. CMSs using the principle of X-ray computed tomography (CT)
4/8/2021 - PDF - English - BSI
Learn More

€24.00

21/30394409 DC:2021

BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
4/1/2021 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 22081:2021

Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
2/22/2021 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 25178-72:2017+A1:2020

Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
10/1/2020 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 8502-9:2020

Preparation of steel substrates before application paints and related products. Tests for the assessment surface cleanliness Field method conductometric determination water-soluble salts
9/16/2020 - PDF - English - BSI
Learn More

€180.00

PD ISO/TR 23276:2020

Geometrical product specifications (GPS). Surface texture: Profile method. Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
8/24/2020 - PDF - English - BSI
Learn More

€180.00

BS EN 13523-18:2020

Coil coated metals. Test methods Resistance to staining
6/9/2020 - PDF - English - BSI
Learn More

€151.00

BS EN 13523-6:2020

Coil coated metals. Test methods Adhesion after indentation (cupping test)
6/9/2020 - PDF - English - BSI
Learn More

€151.00

BS EN ISO 13385-2:2020 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/3/2020 - PDF - English - BSI
Learn More

€235.00

BS EN ISO 13385-2:2020

Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/1/2020 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 16610-29:2020

Geometrical product specifications (GPS). Filtration Linear profile filters: Wavelets
4/28/2020 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 10360-5:2020

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
4/21/2020 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 21204:2020

Geometrical product specifications (GPS). Transition specification
3/18/2020 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 16610-61:2015+A1:2020

Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
3/11/2020 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 25178-71:2017 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
2/27/2020 - PDF - English - BSI
Learn More

€235.00

BS ISO 464:2015 + Redline

Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
2/27/2020 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 17450-3:2016 + Redline

Tracked Changes. Geometrical product specifications (GPS). General concepts Toleranced features
2/26/2020 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 3040:2016 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
2/26/2020 - PDF - English - BSI
Learn More

€382.00

BS EN ISO 14405-1:2016 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
2/25/2020 - PDF - English - BSI
Learn More

€454.00

BS EN 13523-1:2017 + Redline

Tracked Changes. Coil coated metals. Test methods Film thickness
2/25/2020 - PDF - English - BSI
Learn More

€197.00

BS EN ISO 14253-1:2017 + Redline

Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/24/2020 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 14405-2:2019 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
2/24/2020 - PDF - English - BSI
Learn More

€326.00

BS EN ISO 1101:2017 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/24/2020 - PDF - English - BSI
Learn More

€586.00

BS EN ISO 8502-3:2017 + Redline

Tracked Changes. Preparation of steel substrates before application paints and related products. Tests for the assessment surface cleanliness Assessment dust on surfaces prepared painting (pressure-sensitive tape method)
2/24/2020 - PDF - English - BSI
Learn More

€235.00

BS EN ISO 8502-4:2017 + Redline

Tracked Changes. Preparation of steel substrates before application paints and related products. Tests for the assessment surface cleanliness Guidance on estimation probability condensation prior to paint
2/24/2020 - PDF - English - BSI
Learn More

€382.00

BS EN ISO 17201-1:2018 + Redline

Tracked Changes. Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
2/24/2020 - PDF - English - BSI
Learn More

€432.00

BS EN ISO 5458:2018 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
1/29/2020 - PDF - English - BSI
Learn More

€454.00

BS EN ISO 14978:2018 + Redline

Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
11/27/2019 - PDF - English - BSI
Learn More

€454.00

BS EN ISO 25178-607:2019

Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (confocal microscopy) instruments
10/25/2019 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 13385-1:2019

Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
9/24/2019 - PDF - English - BSI
Learn More

€250.00

BS EN 13036-5:2019

Road and airfield surface characteristics. Test methods Determination of longitudinal unevenness indices
9/12/2019 - PDF - English - BSI
Learn More

€348.00

19/30400877 DC:2019

BS EN IEC 60061-3 AMD58. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
8/7/2019 - PDF - English - BSI
Learn More

€24.00

19/30395140 DC:2019

BS EN ISO 8062-3. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Part 3. General dimensional machining allowances castings
6/24/2019 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 25178-73:2019

Geometrical product specifications (GPS). Surface texture: Areal Terms and definitions for surface defects on material measures
6/18/2019 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 20170:2019

Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
5/22/2019 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 25178-600:2019

Geometrical product specifications (GPS). Surface texture: Areal Metrological characteristics for areal topography measuring methods
4/17/2019 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 14978:2018

Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
3/21/2019 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 14405-2:2019

Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
1/28/2019 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 17201-1:2018

Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
1/4/2019 - PDF - English - BSI
Learn More

€331.00

18/30379226 DC:2018

BS EN IEC 60061-3 AMD57. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
6/22/2018 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 5458:2018

Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
6/11/2018 - PDF - English - BSI
Learn More

€348.00

18/30376927 DC:2018

BS EN 60061-3 AMD56. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
5/3/2018 - PDF - English - BSI
Learn More

€24.00

PD ISO/TS 21619:2018

Geometrical product specifications (GPS). Types of documents with GPS
4/17/2018 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 17450-4:2018

Geometrical product specifications (GPS). Basic concepts characteristics for quantifying GPS deviations
2/20/2018 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 14253-1:2017

Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/7/2018 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 25178-71:2017

Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
10/23/2017 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 2360:2017

Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method
9/15/2017 - PDF - English - BSI
Learn More

€293.00

17/30358444 DC:2017

BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing Part 2. Dimensions other than linear sizes
6/16/2017 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 16610-30:2017

Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
4/30/2017 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 1938-2:2017

Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
2/28/2017 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 1101:2017

Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/28/2017 - PDF - English - BSI
Learn More

€449.00

BS EN ISO 8502-3:2017

Preparation of steel substrates before application paints and related products. Tests for the assessment surface cleanliness Assessment dust on surfaces prepared painting (pressure-sensitive tape method)
2/28/2017 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 8502-4:2017

Preparation of steel substrates before application paints and related products. Tests for the assessment surface cleanliness Guidance on estimation probability condensation prior to paint
2/28/2017 - PDF - English - BSI
Learn More

€293.00

BS EN 13523-1:2017

Coil coated metals. Test methods Film thickness
2/28/2017 - PDF - English - BSI
Learn More

€151.00

BS EN ISO 9013:2017

Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
2/28/2017 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 14405-3:2017

Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes
1/31/2017 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 16610-28:2016

Geometrical product specifications (GPS). Filtration Profile filters: End effects
1/31/2017 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-31:2016

Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
12/31/2016 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 18391:2016

Geometrical product specifications (GPS). Population specification
11/30/2016 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 10360-12:2016

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Articulated arm measurement machines (CMM)
11/30/2016 - PDF - English - BSI
Learn More

€348.00

PD ISO/TS 17865:2016

Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
9/30/2016 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 14405-1:2016

Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
9/30/2016 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 17450-3:2016

Geometrical product specifications (GPS). General concepts Toleranced features
7/31/2016 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 3040:2016

Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
5/31/2016 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 25178-1:2016

Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
4/30/2016 - PDF - English - BSI
Learn More

€293.00

16/30314605 DC:2016

BS EN ISO 5459. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
3/29/2016 - PDF - English - BSI
Learn More

€43.00

BS EN ISO 1938-1:2015

Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
11/30/2015 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 16610-60:2015

Geometrical Product Specification (GPS). Filtration Linear areal filters: Basic concepts
11/30/2015 - PDF - English - BSI
Learn More

€250.00

BS ISO 464:2015

Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
11/30/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 463:2006

Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
10/31/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 13225:2012

Geometrical product specifications (GPS). Dimensional measuring equipment, Height gauges. Design and metrological characteristics
10/31/2015 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 9493:2010

Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
10/31/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 14253-5:2015

Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing indicating instruments
9/30/2015 - PDF - English - BSI
Learn More

€250.00

PD CEN ISO/TS 8062-2:2013

Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
9/30/2015 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 16610-22:2015

Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters
7/31/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 25178-606:2015

Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
6/30/2015 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 16610-40:2015

Geometrical product specifications (GPS). Filtration Morphological profile filters: Basic concepts
6/30/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-41:2015

Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
6/30/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-49:2015

Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques
6/30/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-1:2015

Geometrical product specifications (GPS). Filtration Overview and basic concepts
4/30/2015 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 16610-20:2015

Geometrical product specifications (GPS). Filtration Linear profile filters: Basic concepts
4/30/2015 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 14638:2015

Geometrical product specifications (GPS). Matrix model
2/28/2015 - PDF - English - BSI
Learn More

€250.00

BS 4311-1:2007

Gauge blocks manufactured to imperial specification Specification and validation
2/28/2015 - PDF - English - BSI
Learn More

€180.00

BS 959:2008

Specification for internal micrometers (including stick micrometers)
10/31/2014 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 2538-1:2014

Geometrical product specifications (GPS). Wedges Series of angles and slopes
9/30/2014 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 2538-2:2014

Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
9/30/2014 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-71:2014

Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
9/30/2014 - PDF - English - BSI
Learn More

€250.00

BS EN 13523-4:2014

Coil coated metals. Test methods Pencil hardness
8/31/2014 - PDF - English - BSI
Learn More

€151.00

BS EN 13523-5:2014

Coil coated metals. Test methods Resistance to rapid deformation (impact test)
6/30/2014 - PDF - English - BSI
Learn More

€151.00

BS EN 13523-13:2014

Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat
6/30/2014 - PDF - English - BSI
Learn More

€151.00

BS EN ISO 25178-70:2014

Geometrical product specification (GPS). Surface texture: Areal Material measures
2/28/2014 - PDF - English - BSI
Learn More

€331.00

BS EN ISO 25178-605:2014

Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments
1/31/2014 - PDF - English - BSI
Learn More

€293.00

BS EN ISO 10360-8:2013

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors
12/31/2013 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 10360-9:2013

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing
12/31/2013 - PDF - English - BSI
Learn More

€250.00

BS EN 10049:2013

Measurement of roughness average Ra and peak count RPc on metallic flat products
11/30/2013 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 25178-603:2013

Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
10/31/2013 - PDF - English - BSI
Learn More

€293.00

BS ISO 16239:2013

Metric series wires for measuring screw threads
10/31/2013 - PDF - English - BSI
Learn More

€180.00

PD CEN ISO/TS 15530-1:2013

Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
9/30/2013 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 10579:2013

Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
9/30/2013 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 14253-2:2011

Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation uncertainty in GPS measurement, calibration verification
8/31/2013 - PDF - English - BSI
Learn More

€377.00

BS EN ISO 286-2:2010

Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations holes shafts
8/31/2013 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 286-1:2010

Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
8/31/2013 - PDF - English - BSI
Learn More

€331.00

BS EN ISO 25178-604:2013

Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
8/31/2013 - PDF - English - BSI
Learn More

€348.00

BS EN ISO 9513:2012

Metallic materials. Calibration of extensometer systems used in uniaxial testing
8/31/2013 - PDF - English - BSI
Learn More

€348.00

PD ISO/TS 17863:2013

Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
6/30/2013 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-85:2013

Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
5/31/2013 - PDF - English - BSI
Learn More

€293.00

13/30272930 DC:2013

BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
4/15/2013 - PDF - English - BSI
Learn More

€24.00

BS EN 13036-4:2011

Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance a surface: The pendulum test
3/31/2013 - PDF - English - BSI
Learn More

€293.00

13/30273328 DC:2013

BS ISO 16610-32. Geometrical product specifications (GPS). Filtration. Part 32. Robust profile filters: Spline filters
1/14/2013 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 17450-2:2012

Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
10/31/2012 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 5436-2:2012

Geometrical product specifications (GPS). Surface texture: Profile method, Measurement standards Software measurement
10/31/2012 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 13102:2012

Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
9/30/2012 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 16610-21:2012

Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters
8/31/2012 - PDF - English - BSI
Learn More

€293.00

12/30262704 DC:2012

BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
8/13/2012 - PDF - English - BSI
Learn More

€24.00

BS EN ISO 25178-3:2012

Geometrical product specifications (GPS). Surface texture: Areal Specification operators
7/31/2012 - PDF - English - BSI
Learn More

€250.00

BS EN ISO 8503-1:2012

Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Specifications definitions for ISO surface profile comparators the assessment abrasive surfaces
3/31/2012 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 8503-2:2012

Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Method for the grading surface profile abrasive steel. Comparator procedure
3/31/2012 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 8503-3:2012

Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Method for the calibration ISO surface profile comparators determination profile. Focusing microscope procedure
3/31/2012 - PDF - English - BSI
Learn More

€180.00

BS EN ISO 8503-4:2012

Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Method for the calibration ISO surface profile comparators determination profile. Stylus instrument procedure
3/31/2012 - PDF - English - BSI
Learn More

€180.00