17.040 : Linear and angular measurements
-
UNE-EN ISO 3611:2024
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
4/10/2024 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 3611:2024
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
4/10/2024 - PDF - Spanish -
Learn More€70.00 -
UNE-EN 13523-14:2023
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
12/20/2023 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 8062-3:2023
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
12/20/2023 - PDF - English -
Learn More€106.80 -
UNE-EN 13523-14:2023
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
12/20/2023 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 8062-3:2023
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
12/20/2023 - PDF - Spanish -
Learn More€89.00 -
UNE 82210:2023
Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
7/5/2023 - PDF - Spanish -
Learn More€71.00 -
UNE-EN ISO 21920-2:2023
Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
6/7/2023 - PDF - English -
Learn More€153.60 -
UNE-EN ISO 21920-1:2023
Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
6/7/2023 - PDF - English -
Learn More€127.20 -
UNE-EN ISO 25178-2:2023
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
6/7/2023 - PDF - English -
Learn More€151.20 -
UNE-EN ISO 21920-3:2023
Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
6/7/2023 - PDF - Spanish -
Learn More€82.00 -
UNE-EN ISO 21920-2:2023
Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
6/7/2023 - PDF - Spanish -
Learn More€128.00 -
UNE-EN ISO 21920-1:2023
Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
6/7/2023 - PDF - Spanish -
Learn More€106.00 -
UNE-EN ISO 21920-3:2023
Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
6/7/2023 - PDF - English -
Learn More€98.40 -
UNE-EN ISO 25178-2:2023
Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
6/7/2023 - PDF - Spanish -
Learn More€126.00 -
UNE-EN ISO 16610-62:2023
Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023) (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English -
Learn More€59.00 -
UNE-EN ISO 22081:2023
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
2/8/2023 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 2692:2023
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
2/8/2023 - PDF - English -
Learn More€128.40 -
UNE-EN ISO 10360-10:2023
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
2/8/2023 - PDF - English -
Learn More€120.00 -
UNE-EN ISO 22081:2023
Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
2/8/2023 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 12179:2023
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
2/8/2023 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 2692:2023
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
2/8/2023 - PDF - Spanish -
Learn More€107.00 -
UNE-EN ISO 10360-10:2023
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
2/8/2023 - PDF - Spanish -
Learn More€100.00 -
UNE-EN ISO 12179:2023
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
2/8/2023 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 25178-700:2023
Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022) (Endorsed by Asociación Española de Normalización in February of 2023.)
10/12/2022 - PDF - English -
Learn More€71.00 -
UNE-EN ISO 1:2022
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English -
Learn More€42.00 -
UNE-EN 15302:2022
Railway Applications - Wheel-rail contact geometry parameters - Definitions and Methods for evaluation
10/11/2022 - PDF - English -
Learn More€177.60 -
UNE-EN 16165:2022
Determination of slip resistance of pedestrian surfaces - Methods of evaluation
10/11/2022 - PDF - Spanish -
Learn More€109.00 -
UNE-EN 15302:2022
Railway Applications - Wheel-rail contact geometry parameters - Definitions and Methods for evaluation
10/11/2022 - PDF - Spanish -
Learn More€148.00 -
UNE-EN 16165:2022
Determination of slip resistance of pedestrian surfaces - Methods of evaluation
10/11/2022 - PDF - English -
Learn More€130.80 -
UNE-EN 13523-7:2022
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
6/8/2022 - PDF - English -
Learn More€81.60 -
UNE-EN 13523-0:2022
Coil coated metals - Test methods - Part 0: General introduction
6/8/2022 - PDF - English -
Learn More€62.40 -
UNE-EN 13523-9:2022
Coil coated metals - Test methods - Part 9: Resistance to water immersion
6/8/2022 - PDF - Spanish -
Learn More€58.00 -
UNE-EN 13523-7:2022
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
6/8/2022 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 13523-0:2022
Coil coated metals - Test methods - Part 0: General introduction
6/8/2022 - PDF - Spanish -
Learn More€52.00 -
UNE-EN 13523-9:2022
Coil coated metals - Test methods - Part 9: Resistance to water immersion
6/8/2022 - PDF - English -
Learn More€69.60 -
UNE-CEN/TR 17792:2022
Railway Applications - Wheel-rail contact geometry parameters - Technical report and background information about EN 15302 (Endorsed by Asociación Española de Normalización in April of 2022.)
4/1/2022 - PDF - English -
Learn More€122.00 -
UNE-EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021) (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English -
Learn More€100.00 -
UNE-EN 13523-6:2021
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
6/16/2021 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 13523-18:2021
Coil coated metals - Test methods - Part 18: Resistance to staining
6/16/2021 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 25178-72:2020/A1:2021
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
6/16/2021 - PDF - English -
Learn More€72.00 -
UNE-EN 13523-6:2021
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
6/16/2021 - PDF - English -
Learn More€72.00 -
UNE-EN 13523-18:2021
Coil coated metals - Test methods - Part 18: Resistance to staining
6/16/2021 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 25178-72:2020/A1:2021
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
6/16/2021 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 5458:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
2/17/2021 - PDF - Spanish -
Learn More€96.00 -
UNE-EN ISO 5458:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
2/17/2021 - PDF - English -
Learn More€115.20 -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - PDF - English -
Learn More€117.60 -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - PDF - Spanish -
Learn More€98.00 -
UNE-EN ISO 21204:2020
Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English -
Learn More€99.00 -
UNE-EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English -
Learn More€68.00 -
UNE-EN ISO 16610-29:2020
Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English -
Learn More€72.00 -
UNE-EN 12102-2:2020
Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters
7/1/2020 - PDF - Spanish -
Learn More€79.00 -
UNE-EN 13523-17:2020
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
7/1/2020 - PDF - Spanish -
Learn More€58.00 -
UNE-EN 12102-2:2020
Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters
7/1/2020 - PDF - English -
Learn More€94.80 -
UNE-EN 13523-17:2020
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
7/1/2020 - PDF - English -
Learn More€69.60 -
UNE-EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English -
Learn More€94.00 -
UNE-EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More€69.00 -
UNE-EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English -
Learn More€15.00 -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
3/27/2019 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
3/27/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - Spanish -
Learn More€71.00 -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - English -
Learn More€85.20 -
UNE-EN ISO 14405-1:2018
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/19/2018 - PDF - Spanish -
Learn More€106.00 -
UNE-EN ISO 14405-1:2018
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/19/2018 - PDF - English -
Learn More€127.20 -
UNE-EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English -
Learn More€60.00 -
UNE-EN 13523-8:2017
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
11/2/2017 - PDF - English -
Learn More€72.00 -
UNE-EN 13523-21:2017
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
11/2/2017 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 13523-8:2017
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
11/2/2017 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 13523-21:2017
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
11/2/2017 - PDF - English -
Learn More€81.60 -
€133.00
-
€159.60
-
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
7/26/2017 - PDF - English -
Learn More€98.40 -
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
7/26/2017 - PDF - Spanish -
Learn More€82.00 -
UNE-EN 13523-27:2017
Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
7/5/2017 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 13523-27:2017
Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
7/5/2017 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English -
Learn More€69.00 -
€69.60
-
UNE-EN 13523-29:2017
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
6/21/2017 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 13523-12:2017
Coil coated metals - Test methods - Part 12: Resistance to scratching
6/21/2017 - PDF - Spanish -
Learn More€53.00 -
€58.00
-
UNE-EN 13523-29:2017
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
6/21/2017 - PDF - English -
Learn More€63.60 -
UNE-EN 13523-12:2017
Coil coated metals - Test methods - Part 12: Resistance to scratching
6/21/2017 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English -
Learn More€78.00 -
UNE-EN ISO 18391:2016
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 1101:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English -
Learn More€168.00 -
UNE-EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English -
Learn More€87.00 -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - PDF - Spanish -
Learn More€71.00 -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - PDF - English -
Learn More€85.20 -
UNE-EN ISO 10360-8:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/18/2017 - PDF - Spanish -
Learn More€107.00 -
UNE-EN ISO 10360-8:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/18/2017 - PDF - English -
Learn More€128.40 -
UNE-EN ISO 3040:2016
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
12/14/2016 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
12/14/2016 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 3040:2016
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
12/14/2016 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
12/14/2016 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 26424:2016
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008) (Endorsed by AENOR in June of 2016.)
6/1/2016 - PDF - English -
Learn More€64.00 -
UNE-EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015) (Endorsed by AENOR in February of 2016.)
2/1/2016 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 1938-1:2015
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) (Endorsed by AENOR in February of 2016.)
2/1/2016 - PDF - English -
Learn More€74.00 -
UNE-EN ISO 17450-1:2015
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
11/4/2015 - PDF - Spanish -
Learn More€112.00 -
UNE-EN ISO 17450-1:2015
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
11/4/2015 - PDF - English -
Learn More€134.40 -
UNE-EN ISO 14253-5:2015
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)
11/1/2015 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 17450-2:2015
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
10/28/2015 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 17450-2:2015
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
10/28/2015 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 16610-41:2015
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€63.00 -
UNE-EN ISO 16610-22:2015
Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€66.00 -
UNE-EN ISO 25178-606:2015
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 16610-61:2015
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€66.00 -
UNE-EN ISO 16610-40:2015
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) (Endorsed by AENOR in August of 2015.)
8/1/2015 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 16610-49:2015
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) (Endorsed by AENOR in August of 2015.)
8/1/2015 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 16610-1:2015
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 16610-20:2015
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More€64.00 -
UNE-EN ISO 2538-2:2015
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
6/24/2015 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 2538-1:2015
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
6/24/2015 - PDF - English -
Learn More€69.60 -
UNE-EN ISO 2538-2:2015
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
6/24/2015 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 2538-1:2015
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
6/24/2015 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 10579:2015
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
6/17/2015 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 10579:2015
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
6/17/2015 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 14638:2015
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) (Endorsed by AENOR in March of 2015.)
3/1/2015 - PDF - English -
Learn More€69.00 -
UNE-EN ISO 25178-70:2014
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€78.00 -
UNE-EN ISO 25178-603:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 16610-71:2014
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€68.00 -
UNE-EN ISO 25178-605:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€74.00 -
UNE-EN ISO 10360-9:2013
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€66.00 -
UNE-EN ISO 25178-604:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€80.00 -
€62.40
-
€52.00
-
UNE-EN 13523-5:2014
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
11/5/2014 - PDF - Spanish -
Learn More€49.00 -
UNE-EN 13523-13:2014
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
11/5/2014 - PDF - English -
Learn More€63.60 -
UNE-EN 13523-5:2014
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
11/5/2014 - PDF - English -
Learn More€58.80 -
UNE-EN 13523-13:2014
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
11/5/2014 - PDF - Spanish -
Learn More€53.00 -
UNE 80407:2014 (R2021)
Metrological control of measuring equipment used in the cement test
10/22/2014 - PDF - Spanish -
Learn More€73.00 -
UNE-CEN ISO/TS 8062-2:2013
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013) (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English -
Learn More€96.00 -
UNE-EN 10049:2013 (R2019)
Measurement of roughness average Ra and peak count RPc on metallic flat products (Endorsed by AENOR in January of 2014.)
1/1/2014 - PDF - English -
Learn More€58.00 -
UNE-EN ISO 286-2:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
11/20/2013 - PDF - English -
Learn More€0.00 -
UNE-EN ISO 286-1:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
11/20/2013 - PDF - English -
Learn More€0.00 -
UNE-EN ISO 14253-2:2012/AC:2013
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
11/20/2013 - PDF - English -
Learn More€0.00 -
UNE-EN ISO 286-2:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
11/20/2013 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 286-1:2011/AC:2013
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
11/20/2013 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 14253-2:2012/AC:2013
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
11/20/2013 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 5436-2:2012
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English -
Learn More€65.00 -
UNE-EN ISO 16610-85:2013
Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English -
Learn More€71.00 -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
5/8/2013 - PDF - Spanish -
Learn More€71.00 -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
5/8/2013 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
5/8/2013 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 16610-21:2013
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
5/8/2013 - PDF - English -
Learn More€85.20 -
UNE-EN ISO 13102:2013
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
5/8/2013 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 25178-3:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
5/8/2013 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
12/19/2012 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
12/19/2012 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
11/14/2012 - PDF - English -
Learn More€124.80 -
UNE-EN ISO 25378:2012
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
11/14/2012 - PDF - Spanish -
Learn More€104.00 -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/3/2012 - PDF - Spanish -
Learn More€126.00 -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/3/2012 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 5459:2012
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/3/2012 - PDF - English -
Learn More€151.20 -
UNE-EN ISO 14253-3:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/3/2012 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - Spanish -
Learn More€124.00 -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - English -
Learn More€148.80 -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English -
Learn More€66.00 -
UNE-EN ISO 22432:2011
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English -
Learn More€90.00 -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - English -
Learn More€104.40 -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - Spanish -
Learn More€87.00 -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - English -
Learn More€81.60 -
€72.00
-
€60.00
-
UNE-ISO/IEC GUIA 98-3:2012 IN
Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
2/15/2012 - PDF - Spanish -
Learn More€154.00 -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - English -
Learn More€81.60 -
UNE-EN 13036-4:2012
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
2/8/2012 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 13036-4:2012
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
2/8/2012 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - Spanish -
Learn More€63.00