17.040.40 : Geometrical Product Specification (GPS) 17.040 : Linear and angular measurements 17 : Metrology and measurement. Physical phenomena ICS

BS EN ISO 10360-102:2026

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Grammar of symbols metrological characteristics their
3/6/2026 - PDF DRM - English - BSI
Learn More

€193.00

NBN EN ISO 10360-102:2026

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 102: Grammar of symbols for metrological characteristics and their specifications (ISO 10360-102:2026)
3/4/2026 - - - NBN
Learn More

€92.00

DIN EN ISO 25935:2026-03

Geometrical product specifications (GPS) - Restrained states (ISO/DIS 25935:2026), German and English version prEN ISO 25935:2026
3/1/2026 - PDF - English, German - DIN
Learn More

€77.20

DIN EN ISO 25178-6:2026-03

Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface topography (ISO/DIS 25178-6:2026), German and English version prEN ISO 25178-6:2026
3/1/2026 - PDF - English, German - DIN
Learn More

€84.58

BS ISO 582:2026

Rolling bearings. Chamfer dimensions. Geometrical product specifications (GPS) and values
2/27/2026 - PDF DRM - English - BSI
Learn More

€193.00

26/30500495 DC:2026

BS EN ISO 25178-6 Geometrical product specifications (GPS) — Surface texture: Areal Part 6: Classification of methods for measuring surface texture
2/27/2026 - PDF DRM - English - BSI
Learn More

€23.00

ISO 582:2026

Rolling bearings — Chamfer dimensions — Geometrical product specifications (GPS) and values
2/25/2026 - - - ISO
Learn More

€115.00

ISO 10360-102:2026

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS)
Part 102: Grammar of symbols for metrological characteristics and their specifications
2/20/2026 - - - ISO
Learn More

€115.00

UNE-EN ISO 5059-1:2026

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of two-point inside micrometers (ISO 5059-1:2025)
2/18/2026 - - - AENOR
Learn More

From: €69.00

26/30543123 DC:2026

BS EN ISO 25935 Geometrical product specifications (GPS) — Restrained states
2/11/2026 - PDF DRM - English - BSI
Learn More

€23.00

ISO/DIS 25935:2026

Geometrical product specifications (GPS) — Restrained states
2/11/2026 - - - ISO
Learn More

€77.00

DIN 620-2:2026-02

Rolling bearings - Geometrical product specifications (GPS) - Part 2: Radial bearings, tolerance values
2/1/2026 - PDF - German - DIN
Learn More

€145.14

ISO/DIS 25178-71:2026

Geometrical product specifications (GPS) — Surface texture: Areal
Part 71: Software measurement standards
1/29/2026 - PDF - French - ISO
Learn More

€77.00

DIN EN ISO 463:2026-01

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of indicators (ISO/DIS 463:2026), German and English version prEN ISO 463:2025
1/1/2026 - PDF - English, German - DIN
Learn More

€91.03

26/30500398 DC:2026

BS EN ISO 463 Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of indicators
1/1/2026 - PDF DRM - English - BSI
Learn More

€23.00

ISO/DIS 463:2026

Geometrical product specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of indicators
1/1/2026 - - - ISO
Learn More

€77.00

ISO/DIS 1938-1:2025

Geometrical product specifications (GPS) — Dimensional measuring equipment
12/18/2025 - PDF - French - ISO
Learn More

€75.00

NF E02-352 (12/2025)

Spécification géométrique des produits (GPS) - Tolérances générales (dimensionnelles et géométriques) pour pièces découpées pliées
12/1/2025 - PDF - French - AFNOR
Learn More

€84.50

DIN EN ISO 5459:2025-12

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024), German version EN ISO 5459:2024
12/1/2025 - PDF - German - DIN
Learn More

€248.22

DIN EN ISO 25178-601:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025), German version EN ISO 25178-601:2025
12/1/2025 - PDF - German - DIN
Learn More

€105.42

DIN EN ISO 25178-602:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2025), German version EN ISO 25178-602:2025
12/1/2025 - PDF - German - DIN
Learn More

€105.42

DIN EN ISO 25178-603:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments (ISO 25178-603:2025), German version EN ISO 25178-603:2025
12/1/2025 - PDF - German - DIN
Learn More

€98.32

DIN EN ISO 25178-605:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2025), German version EN ISO 25178-605:2025
12/1/2025 - PDF - German - DIN
Learn More

€98.32

DIN EN ISO 25178-604:2025-12

Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2025), German version EN ISO 25178-604:2025
12/1/2025 - PDF - German - DIN
Learn More

€105.42

UNE-EN ISO 25178-601:2025

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025)
11/19/2025 - - - AENOR
Learn More

From: €75.00

UNE-EN ISO 25178-602:2025

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2025)
11/19/2025 - - - AENOR
Learn More

From: €74.00

DIN EN ISO 5059-1:2025-11

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of two-point inside micrometers (ISO 5059-1:2025), German version EN ISO 5059-1:2025
11/1/2025 - PDF - German - DIN
Learn More

€91.03

UNE-EN ISO 16610-21:2025

Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2025)
10/1/2025 - - - AENOR
Learn More

From: €89.00

UNE-EN ISO 16610-31:2025

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2025)
10/1/2025 - - - AENOR
Learn More

From: €78.00

PR NF EN ISO 2768 (10/2025)

Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Limites de tolérance pour la spécification générale des tailles linéaires et angulaires
10/1/2025 - PDF - French - AFNOR
Learn More

€61.00

BS EN ISO 14405-1:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
9/5/2025 - PDF DRM - English - BSI
Learn More

€524.00

DIN EN ISO 16610-45:2025-09

Geometrical product specifications (GPS) - Filtration - Part 45: Morphological profile filters: Segmentation (ISO 16610-45:2025), German version EN ISO 16610-45:2025
9/1/2025 - PDF - German - DIN
Learn More

€111.40

DIN EN ISO 2768:2025-09

Geometrical product specifications (GPS) - Dimensional tolerancing - Tolerance limits for general specification of linear and angular sizes (ISO/DIS 2768:2025), German and English version prEN ISO 2768:2025
9/1/2025 - PDF - English, German - DIN
Learn More

€77.20

BS EN ISO 14405-1:2025

Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
8/28/2025 - PDF DRM - English - BSI
Learn More

€374.00

NBN EN ISO 14405-1:2025

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2025)
8/28/2025 - - - NBN
Learn More

€187.00

25/30464207 DC:2025

BS EN ISO 2768 Geometrical product specifications (GPS) — Dimensional tolerancing. Tolerance limits for general specification of linear and angular sizes
8/25/2025 - PDF DRM - English - BSI
Learn More

€23.00

ISO/DIS 16610-22:2025

Geometrical product specifications (GPS) — Filtration
8/18/2025 - PDF - French - ISO
Learn More

€75.00

BS EN ISO 25178-601:2025

Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of contact (stylus) instruments
8/18/2025 - PDF DRM - English - BSI
Learn More

€269.00

NF EN ISO 14405-1, E04-563-1 (08/2025)

Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Partie 1: tailles linéaires
8/1/2025 - PDF - French - AFNOR
Learn More

€128.00

NF E04-009 (08/2025)

Spécification géométrique des produits (GPS) - Hiérarchisation des caractéristiques produit-processus
8/1/2025 - PDF - French - AFNOR
Learn More

€107.33

DIN EN ISO 5463:2025-08

Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024), German version EN ISO 5463:2024
8/1/2025 - PDF - German - DIN
Learn More

€150.65

DIN EN ISO 16610-21:2025-08

Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2025), German version EN ISO 16610-21:2025
8/1/2025 - PDF - German - DIN
Learn More

€111.40

DIN EN ISO 16610-31:2025-08

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2025), German version EN ISO 16610-31:2025
8/1/2025 - PDF - German - DIN
Learn More

€98.32

DIN EN ISO 25178-71:2025-07

Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO/DIS 25178-71:2025), German and English version prEN ISO 25178-71:2025
7/1/2025 - PDF - English, German - DIN
Learn More

€91.03

25/30495778 DC:2025

BS EN ISO 25178-71 Geometrical product specifications (GPS) — Surface texture: Areal Part 71: Software measurement standards
6/2/2025 - PDF DRM - English - BSI
Learn More

€23.00

BS EN ISO 5059-1:2025

Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of two-point inside micrometers
5/30/2025 - PDF DRM - English - BSI
Learn More

€193.00

ISO/DIS 25178-606:2025

Geometrical product specifications (GPS) — Surface texture: Areal
5/13/2025 - PDF - French - ISO
Learn More

€75.00

ISO/DIS 12179:2025

Geometrical product specifications (GPS) — Surface texture: Profile — Calibration of contact (stylus) instruments
5/10/2025 - PDF - French - ISO
Learn More

€75.00

NBN EN ISO 5059-1:2025

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of two-point inside micrometers (ISO 5059-1:2025)
5/7/2025 - - - NBN
Learn More

€58.00

NF EN ISO 5059-1, E11-098-1 (05/2025)

Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel - Partie 1 : caractéristiques de conception et caractéristiques métrologiques des micromètres d'intérieur à deux touches
5/1/2025 - PDF - French - AFNOR
Learn More

€82.00

DIN ISO/TS 17863:2025-05

Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies (ISO/TS 17863:2013)
5/1/2025 - PDF - German - DIN
Learn More

€72.80

ISO 5059-1:2025

Geometrical product specifications (GPS) — Dimensional measuring equipment
Part 1: Design and metrological characteristics of two-point inside micrometers
4/29/2025 - - - ISO
Learn More

€77.00

PR NF EN ISO 1938-1, E02-200-1PR (04/2025)

Spécification géométrique des produits (GPS) - Équipement de mesure dimensionnel - Partie 1 : calibres lisses à limite de taille linéaire
4/1/2025 - PDF - English, French - AFNOR
Learn More

€125.00

PR NF EN ISO 25178-606, E05-031-606PR (04/2025)

Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 606 : conception et caractéristiques des instruments sans contact (à variation de focale)
4/1/2025 - PDF - English, French - AFNOR
Learn More

€96.00

PR NF EN ISO 12179, E05-056PR (04/2025)

Spécification géométrique des produits (GPS) - État de surface : Profil - Étalonnage des instruments à contact (palpeur)
4/1/2025 - PDF - English, French - AFNOR
Learn More

€105.50

BS EN ISO 16610-45:2025

Geometrical product specifications (GPS). Filtration Morphological profile filters: Segmentation
3/7/2025 - PDF DRM - English - BSI
Learn More

€316.00

BS EN ISO 25178-604:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (coherence scanning interferometry) instruments
3/6/2025 - PDF DRM - English - BSI
Learn More

€378.00

BS EN ISO 25178-603:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (phase shifting interferometry) instruments
3/6/2025 - PDF DRM - English - BSI
Learn More

€378.00

BS EN ISO 25178-601:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of contact (stylus) instruments
3/6/2025 - PDF DRM - English - BSI
Learn More

€357.00

NBN EN ISO 16610-45:2025

Geometrical product specifications (GPS) - Filtration - Part 45: Morphological profile filters: Segmentation (ISO 16610-45:2025)
3/6/2025 - - - NBN
Learn More

€145.00

BS EN ISO 25178-602:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (confocal chromatic probe) instruments
3/5/2025 - PDF DRM - English - BSI
Learn More

€378.00

BS EN ISO 25178-605:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (point autofocus probe) instruments
3/5/2025 - PDF DRM - English - BSI
Learn More

€378.00

NF EN ISO 16610-45, E05-040-45 (03/2025)

Spécification géométrique des produits (GPS) - Filtrage - Partie 45 : filtres de profil morphologiques : segmentation
3/1/2025 - PDF - French - AFNOR
Learn More

€107.33

DIN 620-7:2025-03

Rolling bearings - Part 7: Geometrical product specifications (GPS) - Vocabulary and representation of symbols
3/1/2025 - PDF - German - DIN
Learn More

€105.42

DIN EN ISO 10360-102:2025-03

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 102: Grammar of symbols for metrological characteristics (ISO/DIS 10360-102:2025), German and English version prEN ISO 10360-102:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€84.58

DIN EN ISO 12179:2025-03

Geometrical product specifications (GPS) - Surface texture: Profile - Calibration of contact (stylus) instruments (ISO/DIS 12179:2025), German and English version prEN ISO 12179:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€105.42

DIN EN ISO 25178-606:2025-03

Geometrical product specifications (GPS) - Surface texture: Areal - Part 606: Design and characteristics of non-contact (focus variation) instruments (ISO/DIS 25178-606:2025), German and English version prEN ISO 25178-606:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€98.32

DIN EN ISO 1938-1:2025-03

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO/DIS 1938-1:2025), German and English version prEN ISO 1938-1:2025
3/1/2025 - PDF - English, German - DIN
Learn More

€116.64

BS EN ISO 25178-601:2025

Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of contact (stylus) instruments
2/28/2025 - PDF DRM - English - BSI
Learn More

€255.00

BS EN ISO 25178-602:2025

Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (confocal chromatic probe) instruments
2/28/2025 - PDF DRM - English - BSI
Learn More

€269.00

BS EN ISO 25178-603:2025

Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (phase shifting interferometry) instruments
2/28/2025 - PDF DRM - English - BSI
Learn More

€269.00

BS EN ISO 25178-604:2025

Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (coherence scanning interferometry) instruments
2/28/2025 - PDF DRM - English - BSI
Learn More

€269.00

BS EN ISO 25178-605:2025

Geometrical product specifications (GPS). Surface texture: Areal Design and characteristics of non-contact (point autofocus probe) instruments
2/28/2025 - PDF DRM - English - BSI
Learn More

€269.00

ISO 16610-45:2025

Geometrical product specifications (GPS) — Filtration
Part 45: Morphological profile filters: Segmentation
2/27/2025 - - - ISO
Learn More

€183.00

BS EN ISO 16610-31:2025 + Redline

Tracked Changes. Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
2/27/2025 - PDF DRM - English - BSI
Learn More

€378.00

BS EN ISO 16610-31:2025

Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
2/21/2025 - PDF DRM - English - BSI
Learn More

€269.00

NBN EN ISO 16610-31:2025

Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2025)
2/19/2025 - - - NBN
Learn More

€124.00

25/30480674 DC:2025

BS EN ISO 1938-1 Geometrical product specifications (GPS) - Dimensional measuring equipment Part 1: Plain limit gauges of linear size
2/17/2025 - PDF DRM - English - BSI
Learn More

€23.00

25/30480678 DC:2025

BS EN ISO 25178-606 Geometrical product specifications (GPS) — Surface texture: Areal Part 606: Design and characteristics of non-contact (focus variation) instruments
2/17/2025 - PDF DRM - English - BSI
Learn More

€23.00

25/30471756 DC:2025

BS EN ISO 12179 Geometrical product specifications (GPS) - Surface texture: Profile -Calibration of contact (stylus) instruments
2/14/2025 - PDF DRM - English - BSI
Learn More

€23.00

25/30470613 DC:2025

BS EN ISO 10360-102 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) Part 102: Grammar of symbols metrological characteristics
2/13/2025 - PDF DRM - English - BSI
Learn More

€23.00

NBN EN ISO 16610-21:2025

Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2025)
2/13/2025 - - - NBN
Learn More

€145.00

ISO 16610-31:2025

Geometrical product specifications (GPS) — Filtration
Part 31: Robust profile filters: Gaussian regression filters
2/7/2025 - - - ISO
Learn More

€155.00

NF EN ISO 25178-604, E05-031-604 (02/2025)

Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 604 : conception et caractéristiques des instruments sans contact (à interférométrie par balayage à cohérence)
2/1/2025 - PDF - French - AFNOR
Learn More

€93.67

NF EN ISO 25178-602, E05-031-602 (02/2025)

Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 602 : conception et caractéristiques des instruments sans contact (à capteur confocal chromatique)
2/1/2025 - PDF - French - AFNOR
Learn More

€93.67

NF EN ISO 25178-601, E05-031-601 (02/2025)

Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 601 : conception et caractéristiques des instruments à contact (palpeur)
2/1/2025 - PDF - French - AFNOR
Learn More

€93.67

NF EN ISO 16610-21, E05-040-21 (02/2025)

Spécification géométrique des produits (GPS) - Filtrage - Partie 21 : filtres de profil linéaires : filtres gaussiens
2/1/2025 - PDF - French - AFNOR
Learn More

€107.33

NF EN ISO 16610-31, E05-040-31 (02/2025)

Spécification géométrique des produits (GPS) - Filtrage - Partie 31 : Filtres de profil robustes: Filtres de régression gaussiens
2/1/2025 - PDF - French - AFNOR
Learn More

€93.50

NF EN ISO 25178-603, E05-031-603 (02/2025)

Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 603 : conception et caractéristiques des instruments sans contact (à interférométrie à glissement de franges)
2/1/2025 - PDF - French - AFNOR
Learn More

€93.67

NF EN ISO 25178-605, E05-031-605 (02/2025)

Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 605 : conception et caractéristiques des instruments sans contact (capteur autofocus à point)
2/1/2025 - PDF - French - AFNOR
Learn More

€93.67

ISO 16610-21:2025

Geometrical product specifications (GPS) — Filtration
Part 21: Linear profile filters: Gaussian filters
1/29/2025 - - - ISO
Learn More

€183.00

DIN EN ISO 1938 Beiblatt 1:2025-01

Geometrical product specifications (GPS) - Dimensional measuring equipment, Supplement 1: Calculation of gauge dimensions for limit gauges
1/1/2025 - PDF - German - DIN
Learn More

€69.91

PR NF EN ISO 16610-22, E05-040-22PR (01/2025)

Spécification géométrique des produits (GPS) - Filtrage - Partie 22 : filtres de profil linéaires: Filtres splines
1/1/2025 - PDF - English, French - AFNOR
Learn More

€105.50

24/30464504 DC:2024

Draft BS ISO 582. Rolling bearings. Chamfer dimensions. Geometrical product specifications (GPS)
12/17/2024 - PDF DRM - English - BSI
Learn More

€23.00

DIN EN ISO 16610-22:2024-12

Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO/DIS 16610-22:2024), German and English version prEN ISO 16610-22:2024
12/1/2024 - PDF - English, German - DIN
Learn More

€105.42

24/30480636 DC:2024

BS EN ISO 16610-22 Geometrical product specifications (GPS) - Filtration Part 22: Linear profile filters: Spline filters
11/11/2024 - PDF DRM - English - BSI
Learn More

€23.00

DIN 23601:2024-11

Geometrical product specification (GPS) - Verification - Requirements for measurements to determine the characteristics for size, form, orientation, location and run-out
11/1/2024 - PDF - German - DIN
Learn More

€248.22

BS EN ISO 5459:2024 + Redline

Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
10/22/2024 - PDF DRM - English - BSI
Learn More

€566.00

BS EN ISO 5459:2024

Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
10/16/2024 - PDF DRM - English - BSI
Learn More

€404.00

NBN EN ISO 5459:2024

Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024)
10/16/2024 - - - NBN
Learn More

€208.00

BS EN ISO 9013:2017+A1:2024

Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
10/8/2024 - PDF DRM - English - BSI
Learn More

€316.00

BS EN ISO 5463:2024

Geometrical product specifications (GPS). Rotary axis form-measuring instruments. Design and metrological characteristics
10/7/2024 - PDF DRM - English - BSI
Learn More

€374.00

ISO 5459:2024

Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
10/4/2024 - - - ISO
Learn More

€261.00

NF E11-095 (10/2024)

Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des micromètres d'extérieur
10/1/2024 - PDF - French - AFNOR
Learn More

€82.00

NF E03-110 (10/2024)

Spécification géométrique des produits (GPS) - Filetages - Vérification par mesure directe
10/1/2024 - PDF - French - AFNOR
Learn More

€117.00

NF ISO 1206/A1, E22-370/A1 (10/2024)

Roulements - Roulements à aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance - Amendement 1
10/1/2024 - PDF - French - AFNOR
Learn More

€37.33

NF EN ISO 5459, E04-554 (10/2024)

Spécification géométrique des produits (GPS) - Tolérancement géométrique - Références spécifiées et systèmes de références spécifiées
10/1/2024 - PDF - French - AFNOR
Learn More

€207.67

NBN EN ISO 5463:2024

Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024)
9/25/2024 - - - NBN
Learn More

€166.00

ISO 5463:2024

Geometrical product specifications (GPS) — Rotary axis form-measuring instruments — Design and metrological characteristics
9/16/2024 - - - ISO
Learn More

€208.00

NF EN ISO 5463, E11-108 (09/2024)

Spécification géométrique des produits (GPS) - Instruments de mesure de forme à axe rotatif - Caractéristiques de conception et caractéristiques métrologiques
9/1/2024 - PDF - French - AFNOR
Learn More

€128.00

NF EN ISO 9013/A1, A87-000/A1 (09/2024)

Coupage thermique - Classification des coupes thermiques - Spécification géométrique des produits et tolérances relatives à la qualité - Amendement 1
9/1/2024 - PDF - French - AFNOR
Learn More

€37.33

DIN EN ISO 18183-2:2024-09

Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024), German version EN ISO 18183-2:2024
9/1/2024 - PDF - German - DIN
Learn More

€69.91

DIN EN ISO 18183-3:2024-09

Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024), German version EN ISO 18183-3:2024
9/1/2024 - PDF - German - DIN
Learn More

€105.42

DIN EN ISO 18183-1:2024-09

Geometrical product specifications (GPS) - Partition - Part 1: Vocabulary and basic concepts (ISO 18183-1:2024), German version EN ISO 18183-1:2024
9/1/2024 - PDF - German - DIN
Learn More

€98.32

DIN EN ISO 3611:2024-09

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023), German version EN ISO 3611:2023
9/1/2024 - PDF - German - DIN
Learn More

€98.32

DIN EN ISO 14405-1:2024-06

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/DIS 14405-1:2024), German and English version prEN ISO 14405-1:2024
6/1/2024 - PDF - English, German - DIN
Learn More

€157.10

Mémento de spécification géométrique des produits - 2e édition

Les normes ISO-GPS
5/29/2024 - Papier - French - DUNOD
Learn More

€26.54

DIN EN ISO 4351:2024-05

Geometrical product specifications (GPS) - Association (ISO 4351:2023), German version EN ISO 4351:2023
5/1/2024 - PDF - German - DIN
Learn More

€91.03

24/30463912 DC:2024

BS EN ISO 14405-1. Geometrical product specifications (GPS). Dimensional tolerancing Part 1. Linear sizes
4/23/2024 - PDF DRM - English - BSI
Learn More

€23.00

UNE-EN ISO 3611:2024

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
4/10/2024 - - - AENOR
Learn More

From: €72.00

BS EN ISO 18183-1:2024

Geometrical product specifications (GPS). Partition Vocabulary and basic concepts
4/4/2024 - PDF DRM - English - BSI
Learn More

€269.00

NBN EN ISO 18183-1:2024

Geometrical product specifications (GPS) - Partition - Part 1: Vocabulary and basic concepts (ISO 18183-1:2024)
4/3/2024 - PDF - French - NBN
Learn More

€92.00

NBN EN ISO 18183-1:2024

Geometrical product specifications (GPS) - Partition - Part 1: Vocabulary and basic concepts (ISO 18183-1:2024)
4/3/2024 - PDF - English - NBN
Learn More

€92.00

NBN EN ISO 18183-1:2024

Geometrical product specifications (GPS) - Partition - Part 1: Vocabulary and basic concepts (ISO 18183-1:2024)
4/3/2024 - - - NBN
Learn More

€92.00

NF EN ISO 18183-1, E04-578-1 (04/2024)

Spécification géométrique des produits (GPS) - Partition - Partie 1 : vocabulaire et concepts de base
4/1/2024 - PDF - French - AFNOR
Learn More

€93.67

ISO 18183-1:2024

Geometrical product specifications (GPS)
Partition — Part 1: Vocabulary and basic concepts
3/22/2024 - - - ISO
Learn More

€115.00

BS EN ISO 18183-2:2024

Geometrical product specifications (GPS). Partition Nominal model
2/16/2024 - PDF DRM - English - BSI
Learn More

€193.00

BS EN ISO 18183-3:2024

Geometrical product specifications (GPS). Partition Methods used for specification and verification
2/16/2024 - PDF DRM - English - BSI
Learn More

€269.00

NBN EN ISO 18183-3:2024

Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
2/14/2024 - PDF - French - NBN
Learn More

€124.00

NBN EN ISO 18183-2:2024

Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024)
2/14/2024 - PDF - French - NBN
Learn More

€40.00

NBN EN ISO 18183-3:2024

Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
2/14/2024 - PDF - English - NBN
Learn More

€124.00

NBN EN ISO 18183-2:2024

Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024)
2/14/2024 - PDF - English - NBN
Learn More

€40.00

NBN EN ISO 18183-3:2024

Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
2/14/2024 - - - NBN
Learn More

€124.00

NBN EN ISO 18183-2:2024

Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024)
2/14/2024 - - - NBN
Learn More

€40.00

ISO 18183-3:2024

Geometrical product specifications (GPS)
Partition — Part 3: Methods used for specification and verification
2/5/2024 - - - ISO
Learn More

€155.00

ISO 18183-2:2024

Geometrical product specifications (GPS)
Partition — Part 2: Nominal model
2/5/2024 - - - ISO
Learn More

€51.00

NF EN ISO 18183-2, E04-578-2 (02/2024)

Spécification géométrique des produits (GPS) - Partition - Partie 2 : modèle nominal
2/1/2024 - PDF - French - AFNOR
Learn More

€65.33

NF EN ISO 18183-3, E04-578-3 (02/2024)

Spécification géométrique des produits (GPS) - Partition - Partie 3 : méthodes utilisées pour la spécification et la vérification
2/1/2024 - PDF - French - AFNOR
Learn More

€93.67

DIN/TR 23605:2024-02

Technical product specification (TPS) - Application guidance - Structured and commented overview of ISO and DIN Standards for technical product documentation (TPD) and geometrical product specification (GPS)
2/1/2024 - PDF - German - DIN
Learn More

€120.56

BS EN ISO 4351:2023

Geometrical product specifications (GPS). Association
1/5/2024 - PDF DRM - English - BSI
Learn More

€269.00

24/30448290 DC:2024

BS ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers Part 1: Two-point micrometers. Design and metrological characteristics
1/2/2024 - PDF DRM - English - BSI
Learn More

€23.00

NBN EN ISO 4351:2023

Geometrical product specifications (GPS) - Association (ISO 4351:2023)
12/21/2023 - PDF - French - NBN
Learn More

€92.00

NBN EN ISO 4351:2023

Geometrical product specifications (GPS) - Association (ISO 4351:2023)
12/21/2023 - PDF - English - NBN
Learn More

€92.00

NBN EN ISO 4351:2023

Geometrical product specifications (GPS) - Association (ISO 4351:2023)
12/21/2023 - PDF - German - NBN
Learn More

€92.00

UNE-EN ISO 8062-3:2023

Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
12/20/2023 - - - AENOR
Learn More

From: €95.00

ISO 4351:2023

Geometrical product specifications (GPS) — Association
12/13/2023 - - - ISO
Learn More

€115.00

NF EN ISO 4351, E04-575 (12/2023)

Spécification géométrique des produits (GPS) - Association
12/1/2023 - PDF - French - AFNOR
Learn More

€93.67

PD ISO/TR 16610-32:2023 + Redline

Tracked Changes. Geometrical product specifications (GPS). Filtration Robust profile filters: Spline filters
11/3/2023 - PDF DRM - English - BSI
Learn More

€378.00

DIN EN ISO 10360-10:2023-11

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021), German version EN ISO 10360-10:2021
11/1/2023 - PDF - German - DIN
Learn More

€145.14

DIN EN ISO 10360-13:2023-11

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021), German version EN ISO 10360-13:2021
11/1/2023 - PDF - German - DIN
Learn More

€162.06

FD ISO/TR 16610-32, E05-040-32 (11/2023)

Spécification géométrique des produits (GPS) - Filtrage - Partie 32 : filtres de profil robustes : filtres splines
11/1/2023 - PDF - French - AFNOR
Learn More

€93.67

PD ISO/TR 16610-32:2023

Geometrical product specifications (GPS). Filtration Robust profile filters: Spline filters
11/1/2023 - PDF DRM - English - BSI
Learn More

€269.00

23/30463884 DC:2023

BS EN ISO 16610-31. Geometrical product specifications (GPS). Filtration Part 31. Robust profile filters. Gaussian regression filters
10/30/2023 - PDF DRM - English - BSI
Learn More

€23.00

ISO/TR 16610-32:2023

Geometrical product specifications (GPS) — Filtration
Part 32: Robust profile filters: Spline filters
10/26/2023 - - - ISO
Learn More

€115.00

23/30463657 DC:2023

BS EN ISO 25178-603. Geometrical product specifications (GPS). Surface texture. Areal Part 603. Design and characteristics of non-contact (phase shifting interferometry) instruments
10/23/2023 - PDF DRM - English - BSI
Learn More

€23.00

23/30463665 DC:2023

BS EN ISO 25178-605. Geometrical product specifications (GPS). Surface texture. Areal Part 605. Design and characteristics of non-contact (point autofocus probe) instruments
10/23/2023 - PDF DRM - English - BSI
Learn More

€23.00

DIN EN ISO 25178-700:2023-10

Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022), German version EN ISO 25178-700:2023
10/1/2023 - PDF - German - DIN
Learn More

€111.40

VDI/VDE 2604 Blatt 1:2023-10

Testing geometric quantities - Combined contour and roughness measurement - Basics, terms and definitions, and device description
10/1/2023 - PDF - English, German - VDI
Learn More

€83.76

BS ISO 199:2023 + Redline

Tracked Changes. Rolling bearings. Thrust bearings. Geometrical product specifications (GPS) and tolerance values
9/11/2023 - PDF DRM - English - BSI
Learn More

€271.00

BS ISO 492:2023 + Redline

Tracked Changes. Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
9/7/2023 - PDF DRM - English - BSI
Learn More

€524.00

NF ISO 199, E22-321 (09/2023)

Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values
9/1/2023 - PDF - French - AFNOR
Learn More

€82.00

NF ISO 492, E22-335 (09/2023)

Rolling bearings - Radial bearings - Geometrical product specifications (GPS) and tolerance values
9/1/2023 - PDF - French - AFNOR
Learn More

€141.33

BS ISO 199:2023

Rolling bearings. Thrust bearings. Geometrical product specifications (GPS) and tolerance values
8/31/2023 - PDF DRM - English - BSI
Learn More

€193.00

BS ISO 492:2023

Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
8/23/2023 - PDF DRM - English - BSI
Learn More

€374.00

NF E11-096 (08/2023)

Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des jauges de profondeur à coulisseau
8/1/2023 - PDF - French - AFNOR
Learn More

€82.00

DIN EN ISO 16610-62:2023-08

Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023), German version EN ISO 16610-62:2023
8/1/2023 - PDF - German - DIN
Learn More

€84.58

NF E11-091 (08/2023)

Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des pieds à coulisse
8/1/2023 - PDF - French - AFNOR
Learn More

€82.00

23/30438188 DC:2023

BS EN ISO 5463. Geometrical product specifications (GPS). Form measuring equipment, Rotary axis form measuring instruments. Design and metrological characteristics
8/1/2023 - PDF DRM - English - BSI
Learn More

€23.00

UNE-EN ISO 21920-2:2023

Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
6/7/2023 - - - AENOR
Learn More

From: €131.00

UNE-EN ISO 25178-2:2023

Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
6/7/2023 - - - AENOR
Learn More

From: €129.00

UNE-EN ISO 21920-3:2023

Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
6/7/2023 - - - AENOR
Learn More

From: €88.00

UNE-EN ISO 21920-1:2023

Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
6/7/2023 - - - AENOR
Learn More

From: €114.00

NF EN ISO 3611, E11-092 (06/2023)

Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
6/1/2023 - PDF - French - AFNOR
Learn More

€82.00

NBN EN ISO 3611:2023

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
6/1/2023 - PDF - French - NBN
Learn More

€92.00

NBN EN ISO 3611:2023

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
6/1/2023 - PDF - English - NBN
Learn More

€92.00

NBN EN ISO 3611:2023

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
6/1/2023 - - - NBN
Learn More

€92.00

DIN EN ISO 8062-3:2023-05

Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023), German version EN ISO 8062-3:2023
5/1/2023 - PDF - German - DIN
Learn More

€122.34

UNE-EN ISO 16610-62:2023

Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023) (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English - AENOR
Learn More

€59.00

DIN 2769:2023-04

Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
4/1/2023 - PDF - German - DIN
Learn More

€56.17

BS EN ISO 16610-62:2023

Geometrical product specifications (GPS). Filtration Linear areal filters: Spline filters
3/13/2023 - PDF DRM - English - BSI
Learn More

€193.00

BS IEC 61108-6:2023

Maritime navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Navigation with Indian constellation (NavIC)/Indian regional system (IRNSS). Receiver equipment. Performance requirements, methods of testing required test results
3/10/2023 - PDF DRM - English - BSI
Learn More

€316.00