17.040.30 : Measuring instruments
-
ISO 10360-6:2001 (R2022)
Geometrical Product Specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
12/20/2001 - Paper - French - ISO
Learn More€148.00 -
DIN 2282-2:2001-12
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
12/1/2001 - PDF - English - DIN
Learn More€57.57 -
DIN 2281-1:2001-12
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
12/1/2001 - PDF - English - DIN
Learn More€40.56 -
VDI/VDE/DGQ 2618 Blatt 1.1:2001-12 (R2015)
Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principals
12/1/2001 - PDF - English, German - VDI
Learn More€92.50 -
VDI/VDE/DGQ 2618 Blatt 10.1:2001-11 (R2015)
Inspection of measuring and test equipments - Test instructions for micrometers
11/1/2001 - PDF - English, German - VDI
Learn More€72.31 -
BS EN ISO 10360-3:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of rotary table as fourth
10/15/2001 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10360-1:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
10/15/2001 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 5436-1:2001
Geometrical Product Specifications (GPS). Surface texture: Profile method, Measurement standards Geometric product specifications texture. method calibration.
8/23/2001 - PDF - English - BSI
Learn More€250.00 -
€25.00
-
€46.02
-
NF EN ISO 10360-1, E11-150-1 (03/2001)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1 : vocabulary - Spécification géométrique des produits (GPS)
3/1/2001 - Paper - English, French - AFNOR
Learn More€118.00 -
JIS B 0651:2001 (R2016)
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
1/31/2001 - PDF - English - JSA
Learn More€124.00 -
NBN EN ISO 10360-1:2001
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000)
1/22/2001 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 10360-1:2001
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000)
1/22/2001 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 10360-1:2001
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000)
1/22/2001 - PDF - English - NBN
Learn More€163.00 -
NF EN ISO 5436-1, E05-053-1 (08/2000)
Geometrical product specifications (GPS) - Surface texture : profile method : measurement standards - Part 1 : material measures - Spécification géométrique des produits (GPS)
8/1/2000 - Paper - French - AFNOR
Learn More€86.67 -
NF EN ISO 10360-3, E11-150-3 (08/2000)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis - Spécification géométrique des produits (GPS)
8/1/2000 - Paper - French - AFNOR
Learn More€86.67 -
NBN EN ISO 5436-1:2000
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures (ISO 5436-1:2000)
5/5/2000 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 5436-1:2000
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures (ISO 5436-1:2000)
5/5/2000 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 5436-1:2000
Geometrical Product Specifications (GPS) - Surface texture: Profile method Measurement standards - Part 1: Material measures (ISO 5436-1:2000)
5/5/2000 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 10360-3:2000
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)
5/5/2000 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 10360-3:2000
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)
5/5/2000 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 10360-3:2000
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)
5/5/2000 - PDF - English - NBN
Learn More€58.00 -
ISO 10360-3:2000 (R2021)
Geometrical Product Specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
3/23/2000 - Paper - French - ISO
Learn More€72.00 -
ISO 5436-1:2000 (R2019)
Geometrical Product Specifications (GPS)
Surface texture: Profile method, Measurement standards
3/9/2000 - Paper - French - ISO
Learn More€110.00 -
DIN 2284-1:2000-01
Verification of geometrical parameters - "NOT GO" screw gauging members - Part 1: "NOT GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/1/2000 - PDF - German - DIN
Learn More€45.98 -
DIN 2284-1:2000-01
NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
1/1/2000 - PDF - English - DIN
Learn More€57.57 -
DIN 2282-1:2000-01
Verification of geometrical parameters - "GO" screw gauging members - Part 1: "GO" workshop gauges, reference and setting gauges for ISO general purpose metric screw threads from 1 mm up to 40 mm nominal diameter
1/1/2000 - PDF - German - DIN
Learn More€52.90 -
DIN 2282-1:2000-01
GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
1/1/2000 - PDF - English - DIN
Learn More€66.07 -
DIN 2249-1:2000-01
Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
1/1/2000 - PDF - German - DIN
Learn More€32.34 -
DIN 2249-1:2000-01
NOT GO gauging members with nominal diameters from 1 mm to 40 mm
1/1/2000 - PDF - English - DIN
Learn More€40.56 -
DIN 2248-1:2000-01
Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
1/1/2000 - PDF - German - DIN
Learn More€32.34 -
DIN 2248-1:2000-01
GO gauging members with nominal diameters from 1 mm to 40 mm
1/1/2000 - PDF - English - DIN
Learn More€40.56 -
DIN 879-1:1999-06
Verification of geometrical parameters - Dial indicator for linear mesurement - Part 1: With mechanical indication
6/1/1999 - PDF - German - DIN
Learn More€45.98 -
€57.57
-
DIN 879-3:1999-06
Verification of geometrical parameters - Dial indicator for linear measurement - Part 3: With mechanical indication and electrical limit contacts
6/1/1999 - PDF - German - DIN
Learn More€32.34 -
DIN 879-3:1999-06
Precision dial indicators - Analogue indicators with electrical limit contacts
6/1/1999 - PDF - English - DIN
Learn More€40.56 -
DIN 32876-1:1999-06
Verification of geometrical parameters - Electrical linear measurement - Part 1: Analogue reception of the measured quantity, concepts, requirements, testing
6/1/1999 - PDF - German - DIN
Learn More€59.63 -
DIN 32876-2:1999-06
Verification of geometrical parameters - Electrical linear measurement - Part 2: Digital reception of the measured quantity, concepts, requirements, testing
6/1/1999 - PDF - German - DIN
Learn More€52.90 -
€63.00
-
BS EN ISO 3650:1999
Geometrical product specifications (GPS). Length standards. Gauge blocks
5/15/1999 - PDF - English - BSI
Learn More€250.00 -
DIN 863-2:1999-04
Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer, concepts, requirements, testing
4/1/1999 - PDF - German - DIN
Learn More€45.98 -
DIN 863-2:1999-04
Micrometers - Fixed micrometers and depth micrometers - Concepts, requirements and testing
4/1/1999 - PDF - English - DIN
Learn More€57.57 -
DIN 863-3:1999-04
Verification of geometrical parameters - Micrometers - Part 3: Special design micrometer callipers for external measurement, characteristics, requirements, testing.
4/1/1999 - PDF - German - DIN
Learn More€52.90 -
DIN 863-3:1999-04
Micrometers - Special design external micrometers - Designs, requirements and testing
4/1/1999 - PDF - English - DIN
Learn More€66.07 -
DIN 863-4:1999-04
Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers, concepts, requirements, testing
4/1/1999 - PDF - German - DIN
Learn More€52.90 -
DIN 863-4:1999-04
Micrometers - Internal micrometers - Concepts, requirements and testing
4/1/1999 - PDF - English - DIN
Learn More€66.07 -
NF EN ISO 3650, E11-010 (03/1999)
Geometrical product specifications (GPS) - Length standards - Gauge blocks - Spécification géométrique des produits (GPS)
3/1/1999 - Paper - French - AFNOR
Learn More€99.33 -
NBN EN ISO 3650:1999
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
2/19/1999 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 3650:1999
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
2/19/1999 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 3650:1999
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
2/19/1999 - PDF - English - NBN
Learn More€89.00 -
UNE 82503:1999
MEASURING INSTRUMENTS. APPARATUS FOR MEASUREMENT OF THE OPACITY AND FOr determination of the light absorption coefficient of exhaust gas in compression-ignition engines.
2/15/1999 - PDF - Spanish - AENOR
Learn More€102.00 -
ISO 3650:1998 (R2020)
Geometrical Product Specifications (GPS)
Length standards
12/20/1998 - Paper - English - ISO
Learn More€110.00 -
ISO 3650:1998 (R2020)
Geometrical Product Specifications (GPS)
Length standards
12/20/1998 - Paper - French - ISO
Learn More€110.00 -
DIN 2269:1998-11
Verification of geometrical parameters - Cylindrical measuring pin
11/1/1998 - PDF - German - DIN
Learn More€59.63 -
ISO 3274:1996/Cor 1:1998
Geometrical Product Specifications (GPS)
Surface texture: Profile method
5/28/1998 - Paper - English - ISO
Learn More€0.00 -
ISO 3274:1996/Cor 1:1998
Geometrical Product Specifications (GPS)
Surface texture: Profile method
5/28/1998 - Paper - French - ISO
Learn More€0.00 -
NF EN 61032, C20-013 (05/1998)
Protection of persons and equipment by enclosures. Probes for verification.
5/1/1998 - Paper - French - AFNOR
Learn More€116.50 -
NF E11-097 (02/1998)
Geometrical product specification (GPS). Length measuring instruments. Screw micrometers depth gauges. Specifications. Test methods. - Spécification géométrique des produits (GPS)
2/1/1998 - Paper - French - AFNOR
Learn More€99.33 -
NBN EN ISO 3274:1998
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
1/14/1998 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 3274:1998
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
1/14/1998 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 3274:1998
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
1/14/1998 - PDF - English - NBN
Learn More€89.00 -
JIS B 7451:1997 (R2017)
Instruments for the assessment of departure from roundness - Measurement of variations in radius
11/20/1997 - PDF - Japanese - JSA
Learn More€36.27 -
€60.00
-
DIN 158-2:1997-06
Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features
6/1/1997 - PDF - German - DIN
Learn More€59.63 -
DIN 158-2:1997-06
Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features
6/1/1997 - PDF - English - DIN
Learn More€74.58 -
€36.27
-
ISO 3274:1996 (R2017)
Geometrical Product Specifications (GPS)
Surface texture: Profile method
12/5/1996 - Paper - English - ISO
Learn More€110.00 -
ISO 3274:1996 (R2017)
Geometrical Product Specifications (GPS)
Surface texture: Profile method
12/5/1996 - Paper - French - ISO
Learn More€110.00 -
€25.00
-
UNE 82313:1995
CALIBRATION SPECIMENS. STYLUS INSTRUMENTS. TYPES, CALIBRATION AND USE OF SPECIMENS.
7/31/1995 - PDF - Spanish - AENOR
Learn More€71.00 -
DIN 2254-1:1995-01
Verification of geometrical parameters - NOT GO ring gauges - Part 1: Nominal diameter from 1 mm up to 315 mm, general purpose
1/1/1995 - PDF - German - DIN
Learn More€32.34 -
DIN 2254-1:1995-01
General purpose NOT GO ring gauges with nominal diameters from 1 mm to 315 mm
1/1/1995 - PDF - English - DIN
Learn More€40.56 -
€46.00
-
€25.00
-
€29.47
-
NF E11-090 (12/1993)
Measuring instruments. External and internal micrometers. Special design. - Instruments de mesurage
12/1/1993 - Paper - French - AFNOR
Learn More€130.67 -
€25.00
-
NF E11-101 (12/1992) (R2002)
Measuring instruments. Measuring plates. - Instruments de mesurage
12/1/1992 - Paper - French - AFNOR
Learn More€99.33 -
NF E11-102 (12/1992) (R2002)
Measuring instruments. Vee blocks. - Instruments de mesurage
12/1/1992 - Paper - French - AFNOR
Learn More€75.67 -
€25.00
-
NF E11-029 (05/1991) (R2002)
Steel gauges. Screw ring gauges. Diameter to 300 mm. - Calibres en acier
5/1/1991 - Paper - French - AFNOR
Learn More€48.00 -
€72.00
-
€72.00
-
€72.00
-
€72.00
-
€180.00
-
€151.00
-
E11-016 (04/1987) (R2012)
Length measuring instruments. Fringe counting, laser source interferometers.
4/1/1987 - Paper - French - AFNOR
Learn More€60.67 -
BS 6740:1987
Method for determining departures from roundness by measuring variations in radius
2/27/1987 - PDF - English - BSI
Learn More€250.00 -
€180.00
-
DIN 49670:1986-10
Gauges for lampholders with protective collar for fluorescent lamps
10/1/1986 - PDF - German - DIN
Learn More€32.34 -
€32.34
-
€40.56
-
DIN 2276-1:1986-06
Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements
6/1/1986 - PDF - German - DIN
Learn More€32.34 -
DIN 2276-1:1986-06
Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements
6/1/1986 - PDF - English - DIN
Learn More€40.56 -
DIN 2276-2:1986-06
Inclination measuring systems; electronic inclination measuring systems; types and requirements
6/1/1986 - PDF - German - DIN
Learn More€32.34 -
DIN 2276-2:1986-06
Inclination measuring systems; electronic inclination measuring systems; types and requirements
6/1/1986 - PDF - English - DIN
Learn More€40.56 -
BS 1347:1986
Specification for architects', engineers' and surveyors' metric scale rules
1/31/1986 - PDF - English - BSI
Learn More€151.00 -
€53.00
-
€39.00
-
€60.67
-
DIN 103-9:1985-02
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
2/1/1985 - PDF - German - DIN
Learn More€65.89 -
DIN 103-9:1985-02
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
2/1/1985 - PDF - English - DIN
Learn More€82.52 -
€48.00
-
€48.00
-
€34.67
-
€34.67
-
€48.00
-
BS 3730-2:1982
Assessment of departures from roundness Specification for characteristics stylus instruments measuring variations in radius (including guidance on use and calibration)
12/31/1982 - PDF - English - BSI
Learn More€180.00 -
€25.67
-
€25.00
-
€25.00
-
€25.00
-
€25.00
-
ISA-37.8:1982 (R1995)
Specifications and Tests for Strain Gage Force Transducers
1/1/1982 - PDF sécurisé - English - ISA
Learn More€63.00 -
ISA-37.12:1982 (R1995)
Specifications and Tests for Potentiometric Displacement Transducers
1/1/1982 - PDF sécurisé - English - ISA
Learn More€63.00 -
DIN 40401-1:1981-12
Gauges for edinson thread for d-type fuses "go" ring gauges
12/1/1981 - PDF - German - DIN
Learn More€32.34 -
DIN 40401-2:1981-12
"Go" and "not go" plug gauges for d-type fuses, gauges for edison thread
12/1/1981 - PDF - German - DIN
Learn More€32.34 -
€52.90
-
€66.07
-
€25.00
-
€32.34
-
€40.56
-
BS 869:1978
Specification for toolmakers' flats and high precision surface plates
1/31/1978 - PDF - English - BSI
Learn More€151.00 -
BS 3064:1978
Specification for metric sine bars and sine tables (excluding compound tables)
1/31/1978 - PDF - English - BSI
Learn More€151.00 -
BS 5204-2:1977
Specification for straightedges Steel or granite of rectangular section
4/29/1977 - PDF - English - BSI
Learn More€151.00 -
€25.00
-
€180.00
-
BS 1054:1975
Specification for engineers' comparators for external measurement
6/30/1975 - PDF - English - BSI
Learn More€151.00 -
BS 5204-1:1975
Specification for straightedges Cast iron (bow shaped and I-section)
4/30/1975 - PDF - English - BSI
Learn More€180.00 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - German - DIN
Learn More€22.99 -
DIN 40431-2:1972-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Plug Gauges
11/1/1972 - PDF - English - DIN
Learn More€28.60 -
€151.00
-
€151.00
-
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - German - DIN
Learn More€22.99 -
DIN 40431-1:1970-11
Steel Conduit Thread, Thread Gauges, "Go" and "Not go" Thread Ring Gauges
11/1/1970 - PDF - English - DIN
Learn More€28.60 -
BS 4484-1:1969
Specification for measuring instruments constructional works Metric graduation and figuring of linear measurement
7/31/1969 - PDF - English - BSI
Learn More€180.00 -
€151.00
-
BS 958:1968
Specification for spirit levels for use in precision engineering
3/22/1968 - PDF - English - BSI
Learn More€151.00 -
BS 4064:1966
Specification for plain setting rings for use with internal diameter measuring machines. Metric units
9/22/1966 - PDF - English - BSI
Learn More€151.00 -
BS 4065:1966
Specification for plain setting rings for use with internal diameter measuring machines. Inch units
9/22/1966 - PDF - English - BSI
Learn More€151.00 -
€180.00
-
€250.00
-
€32.34
-
€40.56
-
BS 1790:1961
Specification for length bars and their accessories (imperial units)
1/31/1961 - PDF - English - BSI
Learn More€250.00 -
€151.00
-
€151.00
-
€151.00