17.040.30 : Measuring instruments
-
VDI/VDE/DGQ 2618 Blatt 19.1:2014-11
Inspection of measuring and test equipment - Test instruction for special gauges and test equipment
11/1/2014 - PDF - English, German -
Learn More€68.50 -
BS 959:2008
Specification for internal micrometers (including stick micrometers)
10/31/2014 - PDF - English -
Learn More€180.00 -
UNE 80407:2014 (R2021)
Metrological control of measuring equipment used in the cement test
10/22/2014 - PDF - Spanish -
Learn More€73.00 -
VDI/VDE 2602 Blatt 4:2014-09
Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
9/1/2014 - PDF - English, German -
Learn More€90.75 -
VDI/VDE/DGQ 2618 Blatt 6.2:2014-07
Inspection of measuring and test equipment - Test instructions for surface plates
7/1/2014 - PDF - English, German -
Learn More€90.75 -
VDI/VDE 2617 Blatt 10.1:2014-05
Accuracy of coordinate measuring machines - Characteristics and their checking - Laser trackers with multiple probing systems
5/1/2014 - PDF - English, German -
Learn More€68.50 -
NF EN ISO 25178-605, E05-031-605 (03/2014)
Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments - Spécification géométrique des produits (GPS)
3/1/2014 - Paper - French -
Learn More€90.00 -
€45.98
-
VDI/VDE 2617 Blatt 2.1:2014-03
Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement
3/1/2014 - PDF - English, German -
Learn More€90.75 -
€57.57
-
NF EN ISO 10360-9, E11-150-9 (02/2014)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9 : CMMs with multiple probing systems - Spécification géométrique des produits (GPS)
2/1/2014 - Paper - French -
Learn More€75.50 -
NF EN ISO 10360-8, E11-150-8 (02/2014)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMS) - Part 8 : CMMs with optical distance sensors - Spécification géométrique des produits (GPS)
2/1/2014 - Paper - French -
Learn More€130.50 -
NBN EN ISO 10360-9:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
1/31/2014 - PDF - English -
Learn More€89.00 -
NBN EN ISO 10360-9:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
1/31/2014 - PDF - French -
Learn More€89.00 -
NBN EN ISO 10360-8:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/31/2014 - PDF - English -
Learn More€184.00 -
NBN EN ISO 10360-8:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/31/2014 - PDF - French -
Learn More€184.00 -
NBN EN ISO 10360-9:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
1/31/2014 - PDF - German -
Learn More€89.00 -
NBN EN ISO 10360-8:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/31/2014 - PDF - German -
Learn More€184.00 -
JIS B 8572-4:2014
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 4: Stationary fuel oil flow meters, fuel oil flow meters on road tankers, mobile type fuel oil flow meters
1/20/2014 - PDF - Japanese -
Learn More€36.27 -
€0.00
-
BS EN ISO 10360-8:2013
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors
12/31/2013 - PDF - English -
Learn More€348.00 -
BS EN ISO 10360-9:2013
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing
12/31/2013 - PDF - English -
Learn More€250.00 -
ISO 10360-9:2013 (R2019)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring systems (CMS)
11/28/2013 - Paper - French -
Learn More€110.00 -
ISO 10360-8:2013 (R2019)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring systems (CMS)
11/21/2013 - Paper - French -
Learn More€223.00 -
€180.00
-
ISO 16239:2013 (R2019)
Metric series wires for measuring screw threads
General information
10/22/2013 - Paper - French -
Learn More€48.00 -
NF E11-053 (10/2013)
Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of dial test indicators (lever type) - Spécification géométrique des produits (GPS)
10/1/2013 - Paper - French -
Learn More€60.67 -
XP CEN ISO/TS 15530-1, E11-160-1 (10/2013)
Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 1 : overview and metrological characteristics - Spécification géométrique des produits (GPS)
10/1/2013 - Paper - French -
Learn More€75.67 -
PD CEN ISO/TS 15530-1:2013
Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
9/30/2013 - PDF - English -
Learn More€250.00 -
CEN ISO/TS 15530-1:2013
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
9/1/2013 - PDF - English -
Learn More€89.00 -
CEN ISO/TS 15530-1:2013
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
9/1/2013 - PDF - French -
Learn More€89.00 -
VDI/VDE/DGQ 2618 Blatt 5.1:2013-09
Inspection of measuring and test equipment - Test instruction for straight edges
9/1/2013 - PDF - English, German -
Learn More€79.88 -
CEN ISO/TS 15530-1:2013
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
9/1/2013 - PDF - German -
Learn More€89.00 -
BS EN ISO 9513:2012
Metallic materials. Calibration of extensometer systems used in uniaxial testing
8/31/2013 - PDF - English -
Learn More€348.00 -
ISO/TS 15530-1:2013 (R2023)
Geometrical product specifications (GPS)
Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
8/21/2013 - Paper - French -
Learn More€110.00 -
VDI/VDE/DGQ 2618 Blatt 5.2:2013-08
Inspection of measuring and test equipment - Test instruction for knife edge straight edges
8/1/2013 - PDF - English, German -
Learn More€68.50 -
DIN EN ISO 9513:2013-05
Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013)
5/1/2013 - PDF - English -
Learn More€157.66 -
DIN EN ISO 9513:2013-05
Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013), German version EN ISO 9513:2012
5/1/2013 - PDF - German -
Learn More€126.26 -
€0.00
-
JIS B 1757-3:2013 (R2017)
Evaluation of instruments for the measurement of individual gears - Part 3: Helix measurement using plane artifacts
2/20/2013 - PDF - Japanese -
Learn More€46.02 -
JIS B 1757-4:2013 (R2017)
Evaluation of instruments for the measurement of individual gears - Part 4: Pitch measurement using sphere artifacts
2/20/2013 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
NF EN ISO 9513, A03-004 (02/2013)
Metallic materials - Calibration of extensometer systems used in uniaxial testing - Matériaux métalliques
2/1/2013 - Paper - French -
Learn More€119.00 -
NF EN ISO 5436-2, E05-053-2 (12/2012)
Geometrical Product Specifications (GPS) - Surface texture : profile method - Measurement standards - Part 2 : software measurement standards - Spécification géométrique des produits (GPS)
12/1/2012 - Paper - French -
Learn More€75.67 -
NBN EN ISO 5436-2:2012
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
11/23/2012 - PDF - French -
Learn More€89.00 -
NBN EN ISO 5436-2:2012
Geometrical product specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
11/23/2012 - PDF - German -
Learn More€89.00 -
NBN EN ISO 5436-2:2012
Geometrical product specifications (GPS) - Surface texture: Profile method Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
11/23/2012 - PDF - English -
Learn More€89.00 -
NBN EN ISO 13102:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
10/31/2012 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13102:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
10/31/2012 - PDF - English -
Learn More€58.00 -
NBN EN ISO 13102:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
10/31/2012 - PDF - French -
Learn More€58.00 -
BS EN ISO 5436-2:2012
Geometrical product specifications (GPS). Surface texture: Profile method, Measurement standards Software measurement
10/31/2012 - PDF - English -
Learn More€250.00 -
NF EN ISO 13102, E11-058 (10/2012)
Geometrical product specifications (GPS) - dimensional measuring equipment : electronic digital-indicator gauge - Design and metrological characteristics - Spécification géométrique des produits (GPS)
10/1/2012 - Paper - French -
Learn More€75.67 -
BS EN ISO 13102:2012
Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
9/30/2012 - PDF - English -
Learn More€250.00 -
ISO 5436-2:2012 (R2023)
Geometrical product specifications (GPS)
Surface texture: Profile method, Measurement standards
9/24/2012 - Paper - French -
Learn More€110.00 -
12/30262704 DC:2012
BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
8/13/2012 - PDF - English -
Learn More€24.00 -
ISO 13102:2012 (R2023)
Geometrical product specifications (GPS)
Dimensional measuring equipment: Electronic digital-indicator gauge
8/13/2012 - Paper - French -
Learn More€72.00 -
NF EN ISO 13225, E11-106 (07/2012)
Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics - Spécification géométrique des produits (GPS)
7/1/2012 - Paper - French -
Learn More€86.67 -
NBN EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
6/29/2012 - PDF - German -
Learn More€121.00 -
NBN EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment Height gauges - Design and metrological characteristics (ISO 13225:2012)
6/29/2012 - PDF - English -
Learn More€121.00 -
NBN EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
6/29/2012 - PDF - French -
Learn More€121.00 -
VDI/VDE 2629 Blatt 2:2012-06
Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
6/1/2012 - PDF - English, German -
Learn More€107.75 -
ISO 13225:2012 (R2023)
Geometrical product specifications (GPS)
Dimensional measuring equipment, Height gauges
4/24/2012 - Paper - French -
Learn More€148.00 -
UNE-ISO/IEC GUIA 98-3:2012 IN
Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
2/15/2012 - PDF - Spanish -
Learn More€154.00 -
12/30242157 DC:2012
BS EN ISO 14253-1 AMD1. Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
2/6/2012 - PDF - English -
Learn More€24.00 -
VDI/VDE 2631 Blatt 7:2012-02 (R2017)
Form measurement - Determination of positional deviations of the form-measurement axes
2/1/2012 - PDF - English, German -
Learn More€99.25 -
JIS B 1757-1:2012 (R2016)
Evaluation of instruments for the measurement of individual gears - Part 1: Method by gear shape artifacts
1/20/2012 - PDF - Japanese -
Learn More€25.00 -
NBN EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
12/14/2011 - PDF - German -
Learn More€89.00 -
NBN EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
12/14/2011 - PDF - English -
Learn More€89.00 -
NBN EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
12/14/2011 - PDF - French -
Learn More€89.00 -
NF E02-317 (12/2011)
Steel gauges - Metric taper ring gauges with tang - Calibres en acier
12/1/2011 - Paper - French -
Learn More€48.00 -
NF E02-315 (12/2011)
Steel gauges - Metric taper plug gauges with tang - Calibres en acier
12/1/2011 - Paper - French -
Learn More€48.00 -
NF EN ISO 15530-3, E11-160-3 (12/2011)
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards - Spécification géométrique des produits (GPS)
12/1/2011 - Paper - French -
Learn More€75.67 -
VDI/VDE 2617 Blatt 13VDI/VDE 2630 Blatt 1.3:2011 (R2018)att 13 VDI/VDE 2630 Blatt 1.3:2011-12
VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors
12/1/2011 - PDF - English, German -
Learn More€110.75 -
DIN 4000-168:2011-11
Tabular layouts of properties - Part 168: Detecting elements/measuring sensors/evaluation devices including measuring amplifiers for geometrical quantities
11/1/2011 - PDF - German -
Learn More€115.33 -
BS EN ISO 15530-3:2011
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use calibrated workpieces or standards
10/31/2011 - PDF - English -
Learn More€250.00 -
ISO 15530-3:2011 (R2022)
Geometrical product specifications (GPS)
Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
10/6/2011 - Paper - French -
Learn More€110.00 -
NF EN ISO 10360-7, E11-150-7 (08/2011)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems - Spécification géométrique des produits (GPS)
8/1/2011 - Paper - French -
Learn More€108.00 -
NBN EN ISO 10360-7:2011
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
7/29/2011 - PDF - German -
Learn More€163.00 -
NBN EN ISO 10360-7:2011
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
7/29/2011 - PDF - English -
Learn More€163.00 -
NBN EN ISO 10360-7:2011
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
7/29/2011 - PDF - French -
Learn More€163.00 -
BS EN ISO 10360-7:2011
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems
6/30/2011 - PDF - English -
Learn More€331.00 -
BS 2795:1981
Specification for dial test indicators (lever type) for linear measurement
6/30/2011 - PDF - English -
Learn More€151.00 -
€0.00
-
ISO 10360-7:2011 (R2021)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
5/23/2011 - Paper - French -
Learn More€199.00 -
JIS B 8572-3:2011 (R2016)
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 3: Small amount fuel oil flow meters
5/20/2011 - PDF - Japanese -
Learn More€25.00 -
JIS B 8572-2:2011 (R2016)
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 2: Small size fuel oil flow meters on road tankers
5/20/2011 - PDF - Japanese -
Learn More€46.02 -
VDI/VDE 2617 Blatt 12.1:2011-03 (R2017)
Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries
3/1/2011 - PDF - English, German -
Learn More€99.25 -
VDI/VDE 2617 Blatt 11:2011-03 (R2017)
Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets
3/1/2011 - PDF - English, German -
Learn More€110.75 -
NF EN ISO 9493, E11-054 (02/2011)
Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics - Spécification géométrique des produits (GPS)
2/1/2011 - Paper - French -
Learn More€86.67 -
VDI/VDE 2617 Blatt 10:2011-01
Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers
1/1/2011 - PDF - English, German -
Learn More€110.75 -
VDI/VDE 2617 Blatt 5.1:2011-01
Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with ball plates
1/1/2011 - PDF - English, German -
Learn More€99.25 -
NBN EN ISO 9493:2010
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
12/17/2010 - PDF - English -
Learn More€121.00 -
NBN EN ISO 9493:2010
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
12/17/2010 - PDF - French -
Learn More€121.00 -
NBN EN ISO 9493:2010
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
12/17/2010 - PDF - German -
Learn More€121.00 -
€48.00
-
NF E02-313 (12/2010)
Steel gauges - Morse taper ring gauges with tang - Calibres en acier
12/1/2010 - Paper - French -
Learn More€48.00 -
NF E02-311 (12/2010)
Steel gauges - Morse taper plug gauges with tang - Calibres en acier
12/1/2010 - Paper - French -
Learn More€34.67 -
VDI/VDE 2617 Blatt 5:2010-12
Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with artefacts
12/1/2010 - PDF - English, German -
Learn More€90.75 -
€48.00
-
ISO 9493:2010 (R2021)
Geometrical product specifications (GPS)
Dimensional measuring equipment: Dial test indicators (lever type)
10/26/2010 - Paper - French -
Learn More€148.00 -
DIN 4000-166:2010-10
Tabular layouts of properties - Part 166: Manual measuring devices for geometrical quantities
10/1/2010 - PDF - German -
Learn More€126.26 -
DIN 4000-164:2010-10
Tabular layouts of properties - Part 164: Standards, setting masters and normals for geometrical quantities
10/1/2010 - PDF - German -
Learn More€110.00 -
DIN 4000-167:2010-10
Tabular layouts of properties - Part 167: Measuring devices for geometrical quantities
10/1/2010 - PDF - German -
Learn More€115.33 -
DIN 4000-165:2010-10
Tabular layouts of properties - Part 165: Gauges for geometrical quantities
10/1/2010 - PDF - German -
Learn More€104.95 -
DIN 4000-169:2010-10
Tabular layouts of properties - Part 169: Manual gear measuring devices and gear measuring instruments
10/1/2010 - PDF - German -
Learn More€92.62 -
GB/T 50493-2019
Specification for Design of Combustible Gas and Toxic Gas Detection and Alarm for Petrochemical Industry (English Version)
9/25/2010 - PDF - English -
Learn More€434.50 -
JIS B 1757-2:2010 (R2015)
Evaluation of instruments for the measurement of individual gears - Part 2: Tooth form measurement using sphere or cylinder artifacts
9/21/2010 - PDF - Japanese -
Learn More€46.02 -
NF EN ISO 25178-602, E05-031-602 (08/2010)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 602 : nominal characteristics of non-contact (confocal chromatic probe) instruments - Spécification géométrique des produits (GPS)
8/1/2010 - Paper - French -
Learn More€99.33 -
VDI/VDE/DGQ 2618 Blatt 14.1:2010-08 (R2015)
Inspection of measuring and test equipment - Test instruction for electrical linear measuring devices consisting of inductive probe and measuring device
8/1/2010 - PDF - English, German -
Learn More€79.88 -
NF EN ISO 25178-601, E05-031-601 (08/2010)
Geometrical product specifications (GPS) - Surface texture : areal - Part 601 : nominal characteristics of contact (stylus) instruments - Spécification géométrique des produits (GPS)
8/1/2010 - Paper - French -
Learn More€75.67 -
VDI/VDE/DGQ 2618 Blatt 10.6:2010-08 (R2015)
Inspection of measuring and test equipment - Test instruction for height micrometers
8/1/2010 - PDF - English, German -
Learn More€79.88 -
NF EN ISO 25178-701, E05-031-701 (08/2010)
Geometrical product specifications (GPS) - Surface texture : areal - Part 701 : calibration and measurement standards for contact (stylus) instruments - Spécification géométrique des produits (GPS)
8/1/2010 - Paper - French -
Learn More€86.50 -
VDI/VDE/DGQ 2618 Blatt 10.7:2010-08 (R2015)
Inspection of measuring and test equipment - Test instruction for internal micrometers with 2-point contact
8/1/2010 - PDF - English, German -
Learn More€90.75 -
VDI/VDE/DGQ 2618 Blatt 10.5:2010-08 (R2015)
Inspection of measuring and test equipment - Test instruction for depth micrometers
8/1/2010 - PDF - English, German -
Learn More€90.75 -
VDI/VDE/DGQ 2618 Blatt 10.2:2010-04 (R2015)
Inspection of measuring and test equipment - Test instruction for micrometers for screw thread measurement and other measurement purposes
4/1/2010 - PDF - English, German -
Learn More€79.88 -
NBN EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
2/19/2010 - PDF - French -
Learn More€142.00 -
NBN EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
2/19/2010 - PDF - German -
Learn More€142.00 -
NBN EN ISO 10360-2:2010
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
2/19/2010 - PDF - English -
Learn More€142.00 -
BS EN ISO 10360-2:2009
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used linear dimensions
1/31/2010 - PDF - English -
Learn More€293.00 -
€0.00
-
NF EN ISO 10360-2, E11-150-2 (01/2010)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2 : CMMs used for measuring linear dimensions - Spécification géométrique des produits (GPS)
1/1/2010 - Paper - French -
Learn More€99.00 -
€180.00
-
€180.00
-
ISO 10360-2:2009 (R2020)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
11/27/2009 - Paper - French -
Learn More€174.00 -
BS 1044-1:2008
Specification for gauge blanks Plug, ring and calliper gauges
10/31/2009 - PDF - English -
Learn More€348.00 -
VDI/VDE 2648 Blatt 1:2009-10 (R2015)
Transducers and measuring systems for measurement of angle - Instructions for traceable calibration - Direct measure angle measuring systems
10/1/2009 - PDF - English, German -
Learn More€78.98 -
VDI/VDE/DGQ 2618 Blatt 16.1:2009-10 (R2015)
Inspection of measuring and test equipment - Test instruction for height gauges
10/1/2009 - PDF - English, German -
Learn More€79.88 -
€151.00
-
VDI/VDE/DGQ 2618 Blatt 6.1:2009-09 (R2015)
Inspection of measuring and test equipment - Test instruction for optical flats and optical parallels
9/1/2009 - PDF - English, German -
Learn More€68.50 -
VDI/VDE/DGQ 2618 Blatt 4.4:2009-09 (R2015)
Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers
9/1/2009 - PDF - English, German -
Learn More€68.50 -
€180.00
-
€180.00
-
BS 4311-2:2009
Gauge blocks manufactured to imperial specification Accessories
6/30/2009 - PDF - English -
Learn More€180.00 -
ISO 463:2006/Cor 2:2009
Geometrical Product Specifications (GPS)
Dimensional measuring equipment
1/23/2009 - Paper - French -
Learn More€0.00 -
VDI/VDE/DGQ 2618 Blatt 10.4:2008-12 (R2015)
Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads
12/1/2008 - PDF - English, German -
Learn More€79.88 -
€180.00
-
€151.00
-
€151.00
-
DD ISO/TS 15530-4:2008
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific using simulation
11/30/2008 - PDF - English -
Learn More€293.00 -
€0.00
-
€0.00
-
VDI/VDE 2617 Blatt 7:2008-09 (R2017)
Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation
9/1/2008 - PDF - English, German -
Learn More€79.88 -
VDI/VDE 2629 Blatt 1:2008-08
Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method
8/1/2008 - PDF - English, German -
Learn More€79.88 -
BS EN ISO 10360-6:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
7/31/2008 - PDF - English -
Learn More€250.00 -
VDI/VDE/DGQ 2618 Blatt 7.2:2008-07 (R2015)
Inspection of measuring and test equipment - Test instruction for protractors
7/1/2008 - PDF - English, German -
Learn More€79.88 -
XP ISO/TS 15530-4, E11-158-4 (07/2008)
Geometrical Product Specifications (GPS) - Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement - Part 4 : Evaluating task-specific measurement uncertainty using simulation - Spécification géométrique des produits (GPS)
7/1/2008 - Paper - French -
Learn More€86.67 -
ISO/TS 15530-4:2008 (R2021)
Geometrical Product Specifications (GPS)
Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
5/22/2008 - Paper - French -
Learn More€148.00 -
€25.00
-
€25.00
-
€62.66
-
ASME B89.4.10360.2-2008
Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2: CMMs Used for Measuring Linear Dimensions (Technical Report)
1/1/2008 - PDF DRM - English -
Learn More€73.00 -
BS 939:2007
Engineers' squares (including cylindrical and block squares). Specification
10/31/2007 - PDF - English -
Learn More€293.00 -
DD ISO/TS 23165:2006
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
9/28/2007 - PDF - English -
Learn More€293.00 -
VDI/VDE/DGQ 2618 Blatt 4.12:2007-07 (R2015)
Inspection of measuring and test equipment - Test instruction for conical gauges
7/1/2007 - PDF - English, German -
Learn More€68.50 -
ISO 463:2006/Cor 1:2007
Geometrical Product Specifications (GPS)
Dimensional measuring equipment
5/31/2007 - Paper - French -
Learn More€0.00 -
ISO 10360-6:2001/Cor 1:2007
Geometrical Product Specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
4/26/2007 - Paper - French -
Learn More€0.00 -
VDI/VDE 2648 Blatt 2:2007-03 (R2015)
Transducers and measuring systems for measurement of angle - Instructions for traceable calibration - Indirect measure angle measuring systems
3/1/2007 - PDF - English, German -
Learn More€89.73 -
€0.00
-
NF EN ISO 463, E11-050 (06/2006)
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges - Spécification géométrique des produits (GPS)
6/1/2006 - Paper - French -
Learn More€75.50 -
VDI/VDE 2617 Blatt 4:2006-05 (R2017)
Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation
5/1/2006 - PDF - English, German -
Learn More€79.88 -
NBN EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
4/24/2006 - PDF - French -
Learn More€89.00 -
NBN EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
4/24/2006 - PDF - German -
Learn More€89.00 -
NBN EN ISO 463:2006
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006)
4/24/2006 - PDF - English -
Learn More€89.00 -
VDI/VDE/DGQ 2618 Blatt 9.2:2006-03 (R2015)
Inspection of measuring and test equipment - Testing instruction for depth callipers
3/1/2006 - PDF - English, German -
Learn More€68.50 -
VDI/VDE/DGQ 2618 Blatt 9.3:2006-03 (R2015)
Inspection of measuring and test equipment, Test instruction for height callipers
3/1/2006 - PDF - English, German -
Learn More€68.50 -
VDI/VDE/DGQ 2618 Blatt 9.1:2006-03 (R2015)
Inspection of measuring and test equipment - Test instruction for callipers for external, internal and depth dimensions
3/1/2006 - PDF - English, German -
Learn More€78.98 -
ISO 463:2006 (R2020)
Geometrical Product Specifications (GPS)
Dimensional measuring equipment
2/28/2006 - Paper - French -
Learn More€110.00 -
VDI/VDE/DGQ 2618 Blatt 4.1:2006-02 (R2015)
Inspection of measuring and test equipment - Testing instruction for cylindrical setting gauges, plug gauges and ring gauges
2/1/2006 - PDF - English, German -
Learn More€79.88 -
VDI/VDE/DGQ 2618 Blatt 13.2:2005-11 (R2015)
Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact
11/1/2005 - PDF - English, German -
Learn More€79.88 -
NF ISO 1502, E03-150 (08/2005)
ISO general-purpose metric screw threads - Gauges and gauging - Filetages métriques ISO pour usages généraux
8/1/2005 - Paper - French -
Learn More€99.33 -
VDI/VDE/DGQ 2618 Blatt 4.7:2005-06 (R2015)
Inspection of measuring and test equipment - Test instruction for gap gauges
6/1/2005 - PDF - English, German -
Learn More€68.50 -
VDI/VDE/DGQ 2618 Blatt 12.1:2005-02 (R2015)
Inspection of measuring and test equipment - Test instruction for lever gauges (quicktests) for external measurement
2/1/2005 - PDF - English, German -
Learn More€69.88 -
VDI/VDE/DGQ 2618 Blatt 13.1:2005-02 (R2015)
Inspection of measuring and test equipment - Test instructions for lever gauges (quicktests) for internal measurements
2/1/2005 - PDF - English, German -
Learn More€69.88 -
€25.00
-
NF E11-200 (03/2004) (R2009)
Geometrical product specification (GPS) - Measuring instruments in use - Use classes - Spécification géométrique des produits (GPS)
3/1/2004 - Paper - French -
Learn More€75.67 -
€0.00
-
VDI/VDE/DGQ 2618 Blatt 3.1:2004-01 (R2015)
Inspection of measuring and test equipment - Test instruction for gauge blocks
1/1/2004 - PDF - English, German -
Learn More€79.88 -
XP E03-110 (12/2003)
Geometrical product specification (GPS) - Screw threads - Direct measuring methods - Spécification géométrique des produits (GPS)
12/1/2003 - Paper - French -
Learn More€144.67 -
VDI/VDE/DGQ 2618 Blatt 1.2:2003-12 (R2015)
Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement
12/1/2003 - PDF - English, German -
Learn More€118.13 -
NF E11-018 (10/2003)
Geometrical product specification (GPS) - Calibration specimens - Plugs with grooves - Spécification géométrique des produits (GPS)
10/1/2003 - Paper - French -
Learn More€99.33 -
€0.00
-
NF E11-107 (12/2002)
Geometrical Product Specification (GPS) - Spheres for metrology - Spécification géométrique des produits (GPS)
12/1/2002 - Paper - French -
Learn More€75.67 -
NF E11-019 (12/2002)
Geometrical product specification (GPS) - Specific standards - Rules of design and characteristics - Spécification géométrique des produits (GPS)
12/1/2002 - Paper - French -
Learn More€86.67 -
ISO 10360-1:2000/Cor 1:2002
Geometrical Product Specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
11/20/2002 - Paper - French -
Learn More€0.00 -
VDI/VDE/DGQ 2618 Blatt 11.3:2002-09 (R2015)
Inspection of measuring and test equipment - Test instructions for lever gauges
9/1/2002 - PDF - English, German -
Learn More€79.88 -
VDI/VDE/DGQ 2618 Blatt 10.3:2002-08 (R2015)
Inspection of measuring and test equipment - Test instructions for micrometers with dial indicator
8/1/2002 - PDF - English, German -
Learn More€79.88 -
VDI/VDE/DGQ 2618 Blatt 10.8:2002-08 (R2015)
Inspection of measuring and test equipment - Test instruction for internal micrometers with three-point-contact
8/1/2002 - PDF - English, German -
Learn More€68.50 -
VDI/VDE/DGQ 2618 Blatt 11.2:2002-08 (R2015)
Inspection of measuring and test equipment - Test instructions for dial indicators for linear measurement with mechanical indication
8/1/2002 - PDF - English, German -
Learn More€79.88 -
VDI/VDE 2634 Blatt 1:2002-05 (R2014)
Optical 3D measuring systems - Imaging systems with point-by-point probing
5/1/2002 - PDF - English, German -
Learn More€62.04 -
€32.34
-
DIN 250:2002-04
Radii on workpieces and their representation in technical drawings
4/1/2002 - PDF - English -
Learn More€40.56 -
JIS B 0670:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
3/20/2002 - PDF - Japanese -
Learn More€36.27 -
JIS B 0659-1:2002 (R2016)
Geometrical Product Specifications (GPS) - Surface texture: Profile method, Measurement standards - Part 1: Material measures
3/20/2002 - PDF - Japanese -
Learn More€25.00 -
NBN EN ISO 10360-6:2002
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
2/12/2002 - PDF - French -
Learn More€121.00 -
NBN EN ISO 10360-6:2002
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
2/12/2002 - PDF - German -
Learn More€121.00 -
NBN EN ISO 10360-6:2002
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
2/12/2002 - PDF - English -
Learn More€121.00 -
NF EN ISO 10360-6, E11-150-6 (02/2002)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 : estimation of errors in computing Gaussian associated features - Spécification géométrique des produits (GPS)
2/1/2002 - Paper - French -
Learn More€99.00 -
€37.00
-
ISO 10360-6:2001 (R2022)
Geometrical Product Specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
12/20/2001 - Paper - French -
Learn More€148.00 -
DIN 2281-1:2001-12
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
12/1/2001 - PDF - English -
Learn More€40.56