17.040 : Linear and angular measurements
-
12/30262704 DC:2012
BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
8/13/2012 - PDF - English - BSI
Learn More€24.00 -
VDI/VDE 2634 Blatt 2:2012-08 (R2018)
Optical 3-D measuring systems - Optical systems based on area scanning
8/1/2012 - PDF - English, German - VDI
Learn More€75.94 -
DIN EN ISO 13225:2012-08
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012), German version EN ISO 13225:2012
8/1/2012 - PDF - German - DIN
Learn More€92.62 -
DIN EN ISO 13225:2012-08
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
8/1/2012 - PDF - English - DIN
Learn More€115.98 -
BS EN ISO 25178-3:2012
Geometrical product specifications (GPS). Surface texture: Areal Specification operators
7/31/2012 - PDF - English - BSI
Learn More€250.00 -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - Spanish - AENOR
Learn More€124.00 -
UNE-EN ISO 14253-2:2012
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
7/25/2012 - PDF - English - AENOR
Learn More€148.80 -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
7/11/2012 - PDF - English - AENOR
Learn More€63.60 -
NF EN ISO 13225, E11-106 (07/2012)
Geometrical product specifications (GPS) - Dimensional measuring instruments - Height gauges - Design and metrological characteristics - Spécification géométrique des produits (GPS)
7/1/2012 - Paper - French - AFNOR
Learn More€86.67 -
UNE-EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English - AENOR
Learn More€66.00 -
UNE-EN ISO 22432:2011
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) (Endorsed by AENOR in July of 2012.)
7/1/2012 - PDF - English - AENOR
Learn More€90.00 -
NBN EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
6/29/2012 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment, Height gauges - Design and metrological characteristics (ISO 13225:2012)
6/29/2012 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 13225:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment Height gauges - Design and metrological characteristics (ISO 13225:2012)
6/29/2012 - PDF - English - NBN
Learn More€121.00 -
ISO 25178-3:2012 (R2023)
Geometrical product specifications (GPS)
Surface texture: Areal
6/27/2012 - Paper - French - ISO
Learn More€110.00 -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 8015:2012
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
6/20/2012 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - Spanish - AENOR
Learn More€87.00 -
UNE-EN ISO 10360-7:2012
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
6/13/2012 - PDF - English - AENOR
Learn More€104.40 -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12780-1:2012
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
6/6/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12780-2:2012
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
6/6/2012 - PDF - English - AENOR
Learn More€72.00 -
VDI/VDE 2629 Blatt 2:2012-06
Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
6/1/2012 - PDF - English, German - VDI
Learn More€107.75 -
NF EN ISO 8503-1, T35-503-1 (05/2012)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1 : specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés
5/1/2012 - Paper - French - AFNOR
Learn More€48.00 -
SEP 1941:2012-05
Measurement of the waviness characteristic value Wsa (1-5) on cold rolled metallic flat products
5/1/2012 - PDF - English, German - STAHL
Learn More€35.05 -
ISO 13225:2012 (R2023)
Geometrical product specifications (GPS)
Dimensional measuring equipment, Height gauges
4/24/2012 - Paper - French - ISO
Learn More€148.00 -
NF E81-010 (04/2012)
Blanking and stamping - Burr on blanked or punched metallic parts - Maximum allowable burr height and measuring method - Découpage et emboutissage
4/1/2012 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 8503-2, T35-503-2 (04/2012)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2 : method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés
4/1/2012 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 8503-3, T35-503-3 (04/2012)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3 : method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés
4/1/2012 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 8503-4, T35-503-4 (04/2012)
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure - Préparation des subjectiles d'acier avant application de peintures et de produits assimilés
4/1/2012 - Paper - French - AFNOR
Learn More€60.67 -
DIN EN ISO 17450-1:2012-04
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011), German version EN ISO 17450-1:2011
4/1/2012 - PDF - German - DIN
Learn More€148.04 -
DIN EN ISO 17450-1:2012-04
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
4/1/2012 - PDF - English - DIN
Learn More€184.86 -
DIN EN ISO 1119:2012-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011), German version EN ISO 1119:2011
4/1/2012 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 1119:2012-04
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
4/1/2012 - PDF - English - DIN
Learn More€82.52 -
BS EN ISO 8503-1:2012
Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Specifications definitions for ISO surface profile comparators the assessment abrasive surfaces
3/31/2012 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8503-2:2012
Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Method for the grading surface profile abrasive steel. Comparator procedure
3/31/2012 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8503-3:2012
Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Method for the calibration ISO surface profile comparators determination profile. Focusing microscope procedure
3/31/2012 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8503-4:2012
Preparation of steel substrates before application paints and related products. Surface roughness characteristics blast-cleaned Method for the calibration ISO surface profile comparators determination profile. Stylus instrument procedure
3/31/2012 - PDF - English - BSI
Learn More€180.00 -
€60.00
-
€72.00
-
DIN EN 1370:2012-03
Founding - Examination of surface condition, German version EN 1370:2011
3/1/2012 - PDF - German - DIN
Learn More€65.89 -
€82.52
-
DIN 66139:2012-03
Pore size analysis - Representation of pore size distributions
3/1/2012 - PDF - German - DIN
Learn More€85.79 -
DIN EN ISO 22432:2012-03
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011), German version EN ISO 22432:2011
3/1/2012 - PDF - German - DIN
Learn More€131.96 -
DIN EN ISO 22432:2012-03
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
3/1/2012 - PDF - English - DIN
Learn More€164.95 -
NBN EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
2/24/2012 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
2/24/2012 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 1119:2012
Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
2/24/2012 - PDF - English - NBN
Learn More€58.00 -
€89.00
-
€89.00
-
€89.00
-
NBN EN ISO 17450-1:2012
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
2/24/2012 - PDF - French - NBN
Learn More€205.00 -
NBN EN ISO 17450-1:2012
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
2/24/2012 - PDF - German - NBN
Learn More€205.00 -
NBN EN ISO 17450-1:2012
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
2/24/2012 - PDF - English - NBN
Learn More€205.00 -
UNE-ISO/IEC GUIA 98-3:2012 IN
Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
2/15/2012 - PDF - Spanish - AENOR
Learn More€154.00 -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12781-2:2012
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
2/15/2012 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 13036-4:2012
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
2/8/2012 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 13036-4:2012
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
2/8/2012 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12180-1:2012
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
2/8/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12781-1:2012
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
2/8/2012 - PDF - English - AENOR
Learn More€72.00 -
12/30242157 DC:2012
BS EN ISO 14253-1 AMD1. Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
2/6/2012 - PDF - English - BSI
Learn More€24.00 -
NF EN ISO 17450-1, E04-001-1 (02/2012)
Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification - Spécification géométrique des produits (GPS)
2/1/2012 - Paper - French - AFNOR
Learn More€144.67 -
€60.50
-
VDI/VDE 2631 Blatt 7:2012-02 (R2017)
Form measurement - Determination of positional deviations of the form-measurement axes
2/1/2012 - PDF - English, German - VDI
Learn More€99.25 -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 9493:2012
Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
2/1/2012 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12180-2:2012
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
2/1/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12181-1:2012
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
2/1/2012 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12181-2:2012
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
2/1/2012 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 14406:2012
Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
2/1/2012 - PDF - English - AENOR
Learn More€81.60 -
BS EN ISO 17450-1:2011
Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
1/31/2012 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 1119:2011
Geometrical product specifications (GPS). Series of conical tapers and taper angles
1/31/2012 - PDF - English - BSI
Learn More€180.00 -
€180.00
-
NBN EN ISO 22432:2012
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
1/27/2012 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 22432:2012
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
1/27/2012 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 22432:2012
Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
1/27/2012 - PDF - English - NBN
Learn More€163.00 -
JIS B 1757-1:2012 (R2016)
Evaluation of instruments for the measurement of individual gears - Part 1: Method by gear shape artifacts
1/20/2012 - PDF - Japanese - JSA
Learn More€25.00 -
€0.00
-
€0.00
-
ASTM D6240/D6240M-12(2021)e1
Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall
1/1/2012 - PDF - English - ASTM
Learn More€51.00 -
ASTM D6240/D6240M-12(2021)e1 + Redline
Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall
1/1/2012 - PDF - English - ASTM
Learn More€61.00 -
BS EN ISO 22432:2011
Geometrical product specifications (GPS). Features utilized in specification and verification
12/31/2011 - PDF - English - BSI
Learn More€348.00 -
NBN EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
12/14/2011 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
12/14/2011 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 15530-3:2011
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
12/14/2011 - PDF - English - NBN
Learn More€89.00 -
ISO 1119:2011 (R2022)
Geometrical product specifications (GPS)
Series of conical tapers and taper angles
12/5/2011 - Paper - French - ISO
Learn More€72.00 -
ISO 17450-1:2011 (R2022)
Geometrical product specifications (GPS)
General concepts
12/5/2011 - Paper - French - ISO
Learn More€223.00 -
ISO 17450-1:2011 (R2022)
Geometrical product specifications (GPS)
General concepts
12/5/2011 - Paper - English - ISO
Learn More€223.00 -
DIN EN 13036-4:2011-12
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test, German version EN 13036-4:2011
12/1/2011 - PDF - German - DIN
Learn More€99.35 -
DIN EN 13036-4:2011-12
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test
12/1/2011 - PDF - English - DIN
Learn More€124.21 -
VDI/VDE 2617 Blatt 13VDI/VDE 2630 Blatt 1.3:2011 (R2018)att 13 VDI/VDE 2630 Blatt 1.3:2011-12
VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors
12/1/2011 - PDF - English, German - VDI
Learn More€110.75 -
NF E02-315 (12/2011)
Steel gauges - Metric taper plug gauges with tang - Calibres en acier
12/1/2011 - Paper - French - AFNOR
Learn More€48.00 -
NF E02-317 (12/2011)
Steel gauges - Metric taper ring gauges with tang - Calibres en acier
12/1/2011 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 15530-3, E11-160-3 (12/2011)
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM) : technique for determining the uncertainty of measurement - Part 3 : use of calibrated workpieces or measurement standards - Spécification géométrique des produits (GPS)
12/1/2011 - Paper - French - AFNOR
Learn More€75.67 -
DIN EN ISO 25378:2011-12
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011), German version EN ISO 25378:2011
12/1/2011 - PDF - German - DIN
Learn More€141.96 -
DIN EN ISO 25378:2011-12
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
12/1/2011 - PDF - English - DIN
Learn More€177.38 -
NBN EN 13036-4:2011
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
11/14/2011 - PDF - French - NBN
Learn More€142.00 -
NBN EN 13036-4:2011
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
11/14/2011 - PDF - German - NBN
Learn More€142.00 -
NBN EN 13036-4:2011
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
11/14/2011 - PDF - English - NBN
Learn More€142.00 -
ISO 22432:2011 (R2022)
Geometrical product specifications (GPS)
Features utilized in specification and verification
11/8/2011 - Paper - French - ISO
Learn More€199.00 -
ISO 22432:2011 (R2022)
Geometrical product specifications (GPS)
Features utilized in specification and verification
11/8/2011 - Paper - English - ISO
Learn More€199.00 -
€66.00
-
DIN 4000-168:2011-11
Tabular layouts of properties - Part 168: Detecting elements/measuring sensors/evaluation devices including measuring amplifiers for geometrical quantities
11/1/2011 - PDF - German - DIN
Learn More€115.33 -
NF EN ISO 5459, E04-554 (11/2011)
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems - Spécification géométrique des produits (GPS)
11/1/2011 - Paper - French - AFNOR
Learn More€154.67 -
BS EN ISO 15530-3:2011
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use calibrated workpieces or standards
10/31/2011 - PDF - English - BSI
Learn More€250.00 -
NBN EN ISO 5459:2011
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/21/2011 - PDF - French - NBN
Learn More€205.00 -
NBN EN ISO 5459:2011
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/21/2011 - PDF - German - NBN
Learn More€205.00 -
NBN EN ISO 5459:2011
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
10/21/2011 - PDF - English - NBN
Learn More€205.00 -
ISO 15530-3:2011 (R2022)
Geometrical product specifications (GPS)
Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
10/6/2011 - Paper - French - ISO
Learn More€110.00 -
VDI/VDE/DGQ/DKD 2622 Blatt 15.1:2011-10 (R2017)
Calibration for measuring equipment for electrical quantities - Artificial mains networks
10/1/2011 - PDF - English, German - VDI
Learn More€99.25 -
DIN EN ISO 14253-3:2011-10
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011), German version EN ISO 14253-3:2011
10/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 14253-3:2011-10
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
10/1/2011 - PDF - English - DIN
Learn More€91.12 -
BS EN ISO 8015:2011
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
9/30/2011 - PDF - English - BSI
Learn More€180.00 -
DIN EN ISO 8015:2011-09
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011), German version EN ISO 8015:2011
9/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 8015:2011-09
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
9/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 10360-7:2011-09
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011), German version EN ISO 10360-7:2011
9/1/2011 - PDF - German - DIN
Learn More€120.84 -
DIN EN ISO 10360-7:2011-09
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
9/1/2011 - PDF - English - DIN
Learn More€150.93 -
BS EN ISO 5459:2011
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
8/31/2011 - PDF - English - BSI
Learn More€377.00 -
€94.79
-
ISO 5459:2011 (R2023)
Geometrical product specifications (GPS)
Geometrical tolerancing
8/10/2011 - Paper - French - ISO
Learn More€248.00 -
ISO 5459:2011 (R2023)
Geometrical product specifications (GPS)
Geometrical tolerancing
8/10/2011 - Paper - English - ISO
Learn More€248.00 -
€66.00
-
NF EN ISO 10360-7, E11-150-7 (08/2011)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems - Spécification géométrique des produits (GPS)
8/1/2011 - Paper - French - AFNOR
Learn More€108.00 -
NF EN ISO 8015, E04-561 (08/2011)
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules - Spécification géométrique des produits (GPS)
8/1/2011 - Paper - French - AFNOR
Learn More€60.50 -
NBN EN ISO 10360-7:2011
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
7/29/2011 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 10360-7:2011
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
7/29/2011 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 10360-7:2011
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
7/29/2011 - PDF - English - NBN
Learn More€163.00 -
NF EN ISO 14253-3, E10-201-3 (07/2011)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3 : guidelines for achieving agreements on measurement uncertainty statements - Spécification géométrique des produits (GPS)
7/1/2011 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 14253-2, E10-201-2 (07/2011)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 : guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Spécification géométrique des produits (GPS)
7/1/2011 - Paper - French - AFNOR
Learn More€144.67 -
DIN EN ISO 12781-1:2011-07
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011), German version EN ISO 12781-1:2011
7/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 12781-1:2011-07
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
7/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 12781-2:2011-07
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011), German version EN ISO 12781-2:2011
7/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12781-2:2011-07
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 12180-1:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011), German version EN ISO 12180-1:2011
7/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12180-1:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
7/1/2011 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 12180-2:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011), German version EN ISO 12180-2:2011
7/1/2011 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 12180-2:2011-07
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 12181-1:2011-07
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011), German version EN ISO 12181-1:2011
7/1/2011 - PDF - German - DIN
Learn More€79.72 -
DIN EN ISO 12181-1:2011-07
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
7/1/2011 - PDF - English - DIN
Learn More€99.44 -
DIN EN ISO 12181-2:2011-07
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011), German version EN ISO 12181-2:2011
7/1/2011 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 12181-2:2011-07
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€82.52 -
DIN EN ISO 12780-2:2011-07
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011), German version EN ISO 12780-2:2011
7/1/2011 - PDF - German - DIN
Learn More€65.89 -
DIN EN ISO 12780-2:2011-07
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
7/1/2011 - PDF - English - DIN
Learn More€82.52 -
BS EN ISO 10360-7:2011
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems
6/30/2011 - PDF - English - BSI
Learn More€331.00 -
BS 2795:1981
Specification for dial test indicators (lever type) for linear measurement
6/30/2011 - PDF - English - BSI
Learn More€151.00 -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
6/17/2011 - PDF - French - NBN
Learn More€205.00 -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
6/17/2011 - PDF - German - NBN
Learn More€205.00 -
NBN EN ISO 14253-2:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
6/17/2011 - PDF - English - NBN
Learn More€205.00 -
NBN EN ISO 14253-3:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
6/17/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 14253-3:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
6/17/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 14253-3:2011
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
6/17/2011 - PDF - English - NBN
Learn More€58.00 -
€0.00
-
NF EN ISO 25378, E04-571 (06/2011)
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions - Spécification géométrique des produits
6/1/2011 - Paper - French - AFNOR
Learn More€144.67 -
BS EN ISO 25378:2011
Geometrical product specifications (GPS). Characteristics and conditions. Definitions
5/31/2011 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 14253-3:2011
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on uncertainty statements
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 12180-1:2011
Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
€148.00
-
€148.00
-
ISO 10360-7:2011 (R2021)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring machines (CMM)
5/23/2011 - Paper - French - ISO
Learn More€199.00 -
NBN EN ISO 12780-2:2011
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
5/20/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 12780-2:2011
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
5/20/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 12780-2:2011
Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
5/20/2011 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 12180-1:2011
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
5/20/2011 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 12180-1:2011
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
5/20/2011 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 12180-1:2011
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
5/20/2011 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 12781-2:2011
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
5/20/2011 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 12781-2:2011
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
5/20/2011 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 12781-2:2011
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
5/20/2011 - PDF - English - NBN
Learn More€89.00 -
NBN EN ISO 12781-1:2011
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
5/20/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 12781-1:2011
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
5/20/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 12781-1:2011
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
5/20/2011 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 12780-1:2011
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
5/20/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 12780-1:2011
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
5/20/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 12780-1:2011
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
5/20/2011 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 12181-2:2011
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
5/20/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 12181-2:2011
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
5/20/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 12181-2:2011
Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
5/20/2011 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 12180-2:2011
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
5/20/2011 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 12180-2:2011
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
5/20/2011 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 12180-2:2011
Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
5/20/2011 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 12181-1:2011
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
5/20/2011 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 12181-1:2011
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
5/20/2011 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 12181-1:2011
Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
5/20/2011 - PDF - English - NBN
Learn More€89.00 -
JIS B 8572-3:2011 (R2016)
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 3: Small amount fuel oil flow meters
5/20/2011 - PDF - Japanese - JSA
Learn More€25.00 -
JIS B 8572-2:2011 (R2016)
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 2: Small size fuel oil flow meters on road tankers
5/20/2011 - PDF - Japanese - JSA
Learn More€46.02 -
NBN EN ISO 25378:2011
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
5/20/2011 - PDF - French - NBN
Learn More€184.00 -
NBN EN ISO 25378:2011
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
5/20/2011 - PDF - German - NBN
Learn More€184.00 -
NBN EN ISO 25378:2011
Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
5/20/2011 - PDF - English - NBN
Learn More€184.00 -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
5/11/2011 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 25178-601:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
5/11/2011 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 25178-602:2011
Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
5/11/2011 - PDF - Spanish - AENOR
Learn More€77.00