17.040 : Linear and angular measurements
-
DIN EN ISO 16610-41:2015-12
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
12/1/2015 - PDF - English -
Learn More€99.44 -
NF E11-021 (12/2015)
Steel gauges - Plain plug gauges (horology series) - Diameters from 0,1 mm to 3 mm
12/1/2015 - Paper - French -
Learn More€34.67 -
DIN EN ISO 14638:2015-12
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015), German version EN ISO 14638:2015
12/1/2015 - PDF - German -
Learn More€79.72 -
DIN EN ISO 16610-49:2015-12
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
12/1/2015 - PDF - English -
Learn More€107.48 -
BS EN ISO 16610-60:2015
Geometrical Product Specification (GPS). Filtration Linear areal filters: Basic concepts
11/30/2015 - PDF - English -
Learn More€250.00 -
BS ISO 464:2015
Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
11/30/2015 - PDF - English -
Learn More€250.00 -
BS EN ISO 1938-1:2015
Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
11/30/2015 - PDF - English -
Learn More€293.00 -
UNE-EN ISO 17450-1:2015
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
11/4/2015 - PDF - English -
Learn More€134.40 -
UNE-EN ISO 17450-1:2015
Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
11/4/2015 - PDF - Spanish -
Learn More€112.00 -
DIN EN ISO 16610-1:2015-11
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
11/1/2015 - PDF - English -
Learn More€115.98 -
NF EN ISO 14253-5, E10-201-5 (11/2015)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments - Spécification géométrique des produits (GPS)
11/1/2015 - Paper - French -
Learn More€86.50 -
UNE-EN ISO 14253-5:2015
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)
11/1/2015 - PDF - English -
Learn More€65.00 -
DIN EN ISO 16610-1:2015-11
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015), German version EN ISO 16610-1:2015
11/1/2015 - PDF - German -
Learn More€92.62 -
BS EN ISO 13225:2012
Geometrical product specifications (GPS). Dimensional measuring equipment, Height gauges. Design and metrological characteristics
10/31/2015 - PDF - English -
Learn More€293.00 -
BS EN ISO 9493:2010
Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
10/31/2015 - PDF - English -
Learn More€250.00 -
BS EN ISO 463:2006
Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
10/31/2015 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 17450-2:2015
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
10/28/2015 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 17450-2:2015
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
10/28/2015 - PDF - English -
Learn More€81.60 -
ISO 1938-1:2015 (R2021)
Geometrical product specifications (GPS)
Dimensional measuring equipment
10/26/2015 - Paper - English -
Learn More€174.00 -
ISO 1938-1:2015 (R2021)
Geometrical product specifications (GPS)
Dimensional measuring equipment
10/26/2015 - Paper - French -
Learn More€174.00 -
NBN EN ISO 14253-5:2015
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
10/23/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 14253-5:2015
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
10/23/2015 - PDF - French -
Learn More€89.00 -
NBN EN ISO 14253-5:2015
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
10/23/2015 - PDF - German -
Learn More€89.00 -
JIS B 7440-7:2015
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems
10/20/2015 - PDF - Japanese -
Learn More€46.02 -
JIS B 7443-3:2015
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM) : Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards
10/20/2015 - PDF - Japanese -
Learn More€32.50 -
€110.00
-
€110.00
-
BS EN ISO 14253-5:2015
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing indicating instruments
9/30/2015 - PDF - English -
Learn More€250.00 -
PD CEN ISO/TS 8062-2:2013
Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
9/30/2015 - PDF - English -
Learn More€348.00 -
UNE-EN ISO 16610-22:2015
Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€66.00 -
UNE-EN ISO 25178-606:2015
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 16610-61:2015
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€66.00 -
NF EN ISO 16610-61, E05-040-61 (09/2015)
Geometrical product specification (GPS) - Filtration - Part 61 : linear areal filters - Gaussian filters - Spécification géométrique des produits (GPS)
9/1/2015 - Paper - French -
Learn More€86.67 -
UNE-EN ISO 16610-41:2015
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) (Endorsed by AENOR in September of 2015.)
9/1/2015 - PDF - English -
Learn More€63.00 -
NF EN ISO 16610-22, E05-040-22 (09/2015)
Geometrical product specifications (GPS) - Filtration - Part 22 : linear profile filters : spline filters
9/1/2015 - Paper - French -
Learn More€75.67 -
ISO 14253-5:2015 (R2020)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
8/25/2015 - Paper - French -
Learn More€110.00 -
ISO 14253-5:2015 (R2020)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
8/25/2015 - Paper - English -
Learn More€110.00 -
NBN EN ISO 16610-22:2015
Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015)
8/21/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 16610-61:2015
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
8/21/2015 - PDF - German -
Learn More€89.00 -
NBN EN ISO 16610-61:2015
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
8/21/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 16610-22:2015
Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015)
8/21/2015 - PDF - French -
Learn More€89.00 -
NBN EN ISO 16610-61:2015
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
8/21/2015 - PDF - French -
Learn More€89.00 -
DIN 50933:2015-08
Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
8/1/2015 - PDF - German -
Learn More€45.98 -
NF EN ISO 16610-49, E05-040-49 (08/2015)
Geometrical product specifications (GPS) - Filtration - Part 49 : morphological profile filters : scale space techniques
8/1/2015 - Paper - French -
Learn More€75.67 -
UNE-EN ISO 16610-40:2015
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) (Endorsed by AENOR in August of 2015.)
8/1/2015 - PDF - English -
Learn More€65.00 -
NF EN ISO 16610-40, E05-040-40 (08/2015)
Geometrical product specifications (GPS) - Filtration - Part 40 : morphological profile filters : basic concepts
8/1/2015 - Paper - French -
Learn More€75.67 -
UNE-EN ISO 16610-49:2015
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) (Endorsed by AENOR in August of 2015.)
8/1/2015 - PDF - English -
Learn More€65.00 -
DIN 66126:2015-08
Determination of specific surface area of disperse solids by the gas permeability technique - Blaine method
8/1/2015 - PDF - German -
Learn More€72.80 -
NF EN ISO 16610-41, E05-040-41 (08/2015)
Geometrical product specifications (GPS) - Filtration - Part 41 : morphological profile filters : disk and horizontal line-segment filters
8/1/2015 - Paper - French -
Learn More€75.67 -
NF EN ISO 25178-606, E05-031-606 (08/2015)
Geometrical product specification (GPS) - Surface texture : areal - Part 606 : nominal characteristics of non-contact (focus variation) instruments - Spécification géométrique des produits (GPS)
8/1/2015 - Paper - French -
Learn More€86.67 -
BS EN ISO 16610-22:2015
Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters
7/31/2015 - PDF - English -
Learn More€250.00 -
€60.00
-
NBN EN ISO 25178-606:2015
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
7/24/2015 - PDF - French -
Learn More€142.00 -
NBN EN ISO 16610-41:2015
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
7/24/2015 - PDF - French -
Learn More€89.00 -
NBN EN ISO 16610-40:2015
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
7/24/2015 - PDF - German -
Learn More€89.00 -
NBN EN ISO 16610-49:2015
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
7/24/2015 - PDF - German -
Learn More€89.00 -
NBN EN ISO 25178-606:2015
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
7/24/2015 - PDF - German -
Learn More€142.00 -
NBN EN ISO 16610-41:2015
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
7/24/2015 - PDF - German -
Learn More€89.00 -
NBN EN ISO 16610-40:2015
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
7/24/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 16610-49:2015
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
7/24/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 16610-40:2015
Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
7/24/2015 - PDF - French -
Learn More€89.00 -
NBN EN ISO 16610-49:2015
Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
7/24/2015 - PDF - French -
Learn More€89.00 -
NBN EN ISO 25178-606:2015
Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
7/24/2015 - PDF - English -
Learn More€142.00 -
NBN EN ISO 16610-41:2015
Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
7/24/2015 - PDF - English -
Learn More€89.00 -
UNE-EN ISO 16610-1:2015
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 16610-20:2015
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) (Endorsed by AENOR in July of 2015.)
7/1/2015 - PDF - English -
Learn More€64.00 -
NF EN ISO 16610-20, E05-040-20 (07/2015)
Geometrical product specifications (GPS) - Filtration - Part 20 : linear profile filters : basic concepts
7/1/2015 - Paper - French -
Learn More€75.50 -
BS EN ISO 16610-49:2015
Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques
6/30/2015 - PDF - English -
Learn More€250.00 -
BS EN ISO 16610-40:2015
Geometrical product specifications (GPS). Filtration Morphological profile filters: Basic concepts
6/30/2015 - PDF - English -
Learn More€250.00 -
BS EN ISO 16610-41:2015
Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
6/30/2015 - PDF - English -
Learn More€250.00 -
BS EN ISO 25178-606:2015
Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
6/30/2015 - PDF - English -
Learn More€293.00 -
UNE-EN ISO 2538-1:2015
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
6/24/2015 - PDF - English -
Learn More€69.60 -
€110.00
-
UNE-EN ISO 2538-2:2015
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
6/24/2015 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 2538-1:2015
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
6/24/2015 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 2538-2:2015
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
6/24/2015 - PDF - English -
Learn More€75.60 -
€45.18
-
€36.27
-
JIS B 7440-8:2015
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors
6/22/2015 - PDF - Japanese -
Learn More€58.50 -
NBN EN ISO 16610-20:2015
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015)
6/19/2015 - PDF - German -
Learn More€89.00 -
NBN EN ISO 16610-1:2015
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
6/19/2015 - PDF - French -
Learn More€121.00 -
NBN EN ISO 16610-1:2015
Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
6/19/2015 - PDF - English -
Learn More€121.00 -
NBN EN ISO 16610-20:2015
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015)
6/19/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 16610-20:2015
Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015)
6/19/2015 - PDF - French -
Learn More€89.00 -
€110.00
-
UNE-EN ISO 10579:2015
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
6/17/2015 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 10579:2015
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
6/17/2015 - PDF - Spanish -
Learn More€52.00 -
ISO 25178-606:2015 (R2022)
Geometrical product specification (GPS)
Surface texture: Areal
6/8/2015 - Paper - French -
Learn More€174.00 -
€110.00
-
NF EN ISO 16610-1, E05-040-1 (06/2015)
Geometrical product specifications (GPS) - Filtration - Part 1 : overview and basic concepts
6/1/2015 - Paper - French -
Learn More€86.50 -
€110.00
-
€110.00
-
BS EN ISO 16610-1:2015
Geometrical product specifications (GPS). Filtration Overview and basic concepts
4/30/2015 - PDF - English -
Learn More€293.00 -
BS EN ISO 16610-20:2015
Geometrical product specifications (GPS). Filtration Linear profile filters: Basic concepts
4/30/2015 - PDF - English -
Learn More€250.00 -
€110.00
-
€148.00
-
Mémento Cotation ISO Spécification GPS
Handbook for the geometrical specification of products. The ISO-GPS standards, 2012 special issue
4/1/2015 - Paper - French -
Learn More€7.11 -
NBN EN ISO 14638:2015
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
3/27/2015 - PDF - English -
Learn More€89.00 -
NBN EN ISO 14638:2015
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
3/27/2015 - PDF - French -
Learn More€89.00 -
NBN EN ISO 14638:2015
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
3/27/2015 - PDF - German -
Learn More€89.00 -
DIN 2278:2015-03
Geometrical product specifications (GPS) - Gauges for ISO metric screw threads - Dirt grooves
3/1/2015 - PDF - German -
Learn More€39.35 -
UNE-EN ISO 14638:2015
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) (Endorsed by AENOR in March of 2015.)
3/1/2015 - PDF - English -
Learn More€69.00 -
€250.00
-
BS 4311-1:2007
Gauge blocks manufactured to imperial specification Specification and validation
2/28/2015 - PDF - English -
Learn More€180.00 -
NF E04-013 (02/2015)
Geometrical product specification (GPS) - Symbol of workpiece holding
2/1/2015 - Paper - French -
Learn More€86.67 -
€110.00
-
€50.18
-
€110.00
-
UNE-EN ISO 25178-603:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€72.00 -
ASTM G75-15(2021) + Redline
Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
1/1/2015 - PDF - English -
Learn More€87.00 -
UNE-EN ISO 16610-71:2014
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€68.00 -
UNE-EN ISO 25178-605:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€74.00 -
€124.00
-
DIN EN ISO 2538-1:2015-01
Geometrical product specfications (GPS) - Wedges - Part 1: Series of angles and slopes, (ISO 2538-1:2014)
1/1/2015 - PDF - English -
Learn More€74.58 -
UNE-EN ISO 10360-9:2013
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€66.00 -
DIN EN ISO 2538-2:2015-01
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014), German version EN ISO 2538-2:2014
1/1/2015 - PDF - German -
Learn More€72.80 -
UNE-EN ISO 25178-604:2013
Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€80.00 -
ASTM G75-15(2021)
Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
1/1/2015 - PDF - English -
Learn More€74.00 -
UNE-EN ISO 25178-70:2014
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.)
1/1/2015 - PDF - English -
Learn More€78.00 -
DIN EN ISO 2538-1:2015-01
Geometrical product specfications (GPS) - Wedges - Part 1: Series of angles and slopes, (ISO 2538-1:2014), German version EN ISO 2538-1:2014
1/1/2015 - PDF - German -
Learn More€59.63 -
DIN EN ISO 2538-2:2015-01
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
1/1/2015 - PDF - English -
Learn More€91.12 -
€62.40
-
€52.00
-
NF EN ISO 16610-71, E05-040-71 (12/2014)
Geometrical product specifications (GPS) - Filtration - Part 71 : robust areal filters : gaussian regression filters - Spécification géométrique des produits (GPS)
12/1/2014 - Paper - French -
Learn More€86.50 -
DIN EN ISO 16610-71:2014-12
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014), German version EN ISO 16610-71:2014
12/1/2014 - PDF - German -
Learn More€85.79 -
SAE AMS 2242G:2020-10-21
Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
12/1/2014 - PDF - English -
Learn More€87.00 -
NF E02-316 (12/2014)
Steel gauges - 5 % taper rings with tapped hole - Calibres en acier
12/1/2014 - Paper - French -
Learn More€48.00 -
NF E02-314 (12/2014)
Steel gauges - Plug gauges for 5 % tapers - Calibres en acier
12/1/2014 - Paper - French -
Learn More€48.00 -
€48.00
-
DIN EN ISO 16610-71:2014-12
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
12/1/2014 - PDF - English -
Learn More€107.48 -
XP CEN ISO/TS 8062-2, A00-510-2 (12/2014)
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2 : rules
12/1/2014 - Paper - French -
Learn More€130.50 -
€48.00
-
UNE-EN 13523-13:2014
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
11/5/2014 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 13523-5:2014
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
11/5/2014 - PDF - Spanish -
Learn More€49.00 -
UNE-EN 13523-13:2014
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
11/5/2014 - PDF - English -
Learn More€63.60 -
UNE-EN 13523-5:2014
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
11/5/2014 - PDF - English -
Learn More€58.80 -
BS 959:2008
Specification for internal micrometers (including stick micrometers)
10/31/2014 - PDF - English -
Learn More€180.00 -
NBN EN ISO 16610-71:2014
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
10/24/2014 - PDF - German -
Learn More€121.00 -
NBN EN ISO 2538-2:2014
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
10/24/2014 - PDF - English -
Learn More€58.00 -
NBN EN ISO 2538-1:2014
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
10/24/2014 - PDF - German -
Learn More€58.00 -
NBN EN ISO 2538-2:2014
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
10/24/2014 - PDF - French -
Learn More€58.00 -
NBN EN ISO 16610-71:2014
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
10/24/2014 - PDF - English -
Learn More€121.00 -
NBN EN ISO 16610-71:2014
Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
10/24/2014 - PDF - French -
Learn More€121.00 -
NBN EN ISO 2538-1:2014
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
10/24/2014 - PDF - English -
Learn More€58.00 -
NBN EN ISO 2538-2:2014
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
10/24/2014 - PDF - German -
Learn More€58.00 -
NBN EN ISO 2538-1:2014
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
10/24/2014 - PDF - French -
Learn More€58.00 -
UNE 80407:2014 (R2021)
Metrological control of measuring equipment used in the cement test
10/22/2014 - PDF - Spanish -
Learn More€73.00 -
BS EN ISO 2538-1:2014
Geometrical product specifications (GPS). Wedges Series of angles and slopes
9/30/2014 - PDF - English -
Learn More€180.00 -
BS EN ISO 2538-2:2014
Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
9/30/2014 - PDF - English -
Learn More€250.00 -
BS EN ISO 16610-71:2014
Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
9/30/2014 - PDF - English -
Learn More€250.00 -
€148.00
-
€151.00
-
€72.00
-
€72.00
-
JIS B 0681-6:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
7/22/2014 - PDF - Japanese -
Learn More€25.00 -
BS EN 13523-13:2014
Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat
6/30/2014 - PDF - English -
Learn More€151.00 -
BS EN 13523-5:2014
Coil coated metals. Test methods Resistance to rapid deformation (impact test)
6/30/2014 - PDF - English -
Learn More€151.00 -
DIN EN ISO 25178-70:2014-06
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014), German version EN ISO 25178-70:2014
6/1/2014 - PDF - German -
Learn More€115.33 -
DIN EN ISO 25178-605:2014-06
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
6/1/2014 - PDF - English -
Learn More€131.40 -
DIN EN ISO 25178-70:2014-06
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
6/1/2014 - PDF - English -
Learn More€144.02 -
DIN EN ISO 25178-605:2014-06
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014), German version EN ISO 25178-605:2014
6/1/2014 - PDF - German -
Learn More€104.95 -
€0.00
-
DIN EN ISO 10360-9:2014-04
Geometrical product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013), German version EN ISO 10360-9:2013
4/1/2014 - PDF - German -
Learn More€85.79 -
DIN EN ISO 12780-1:2014-04
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011), German version EN ISO 12780-1:2011
4/1/2014 - PDF - German -
Learn More€72.80 -
DIN EN ISO 10360-9:2014-04
Geometrical product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
4/1/2014 - PDF - English -
Learn More€107.48 -
DIN EN ISO 12780-1:2014-04
Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
4/1/2014 - PDF - English -
Learn More€91.12 -
NBN EN ISO 25178-70:2014
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
3/28/2014 - PDF - French -
Learn More€142.00 -
NBN EN ISO 25178-70:2014
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
3/28/2014 - PDF - German -
Learn More€142.00 -
NBN EN ISO 25178-70:2014
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
3/28/2014 - PDF - English -
Learn More€142.00 -
JIS K 5600-1-7:2014
Testing methods for paints - Part 1: General rule - Section 7: Determination of film thickness
3/20/2014 - PDF - Japanese -
Learn More€41.86 -
€66.00
-
DIN EN ISO 10360-8:2014-03
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013), German version EN ISO 10360-8:2013
3/1/2014 - PDF - German -
Learn More€136.82 -
€45.98
-
DIN EN 10049:2014-03
Measurement of roughness average Ra and peak count RPc on metallic flat products
3/1/2014 - PDF - English -
Learn More€74.58 -
NF EN ISO 25178-605, E05-031-605 (03/2014)
Geometrical product specifications (GPS) - Surface texture : areal - Part 605 : nominal characteristics of non-contact (point autofocus probe) instruments - Spécification géométrique des produits (GPS)
3/1/2014 - Paper - French -
Learn More€90.00 -
DIN CEN ISO/TS 8062-2*DIN SPEC 91184:2014-03
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013), German version CEN ISO/TS 8062-2:2013
3/1/2014 - PDF - German -
Learn More€113.64 -
DIN EN ISO 10360-8:2014-03
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
3/1/2014 - PDF - English -
Learn More€170.93 -
€57.57
-
DIN CEN ISO/TS 8062-2:2014-03
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013)
3/1/2014 - PDF - English -
Learn More€177.38 -
DIN EN 10049:2014-03
Measurement of roughness average Ra and peak count RPc on metallic flat products, German version EN 10049:2013
3/1/2014 - PDF - German -
Learn More€59.63 -
NBN EN ISO 25178-605:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
2/28/2014 - PDF - English -
Learn More€142.00 -
NBN EN ISO 25178-605:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
2/28/2014 - PDF - French -
Learn More€142.00 -
BS EN ISO 25178-70:2014
Geometrical product specification (GPS). Surface texture: Areal Material measures
2/28/2014 - PDF - English -
Learn More€331.00 -
NBN EN ISO 25178-605:2014
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
2/28/2014 - PDF - German -
Learn More€142.00 -
ISO 25178-70:2014 (R2019)
Geometrical product specification (GPS)
Surface texture: Areal
2/6/2014 - Paper - French -
Learn More€174.00 -
DIN EN ISO 25178-603:2014-02
Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013), German version EN ISO 25178-603:2013
2/1/2014 - PDF - German -
Learn More€99.35 -
NF EN ISO 10360-9, E11-150-9 (02/2014)
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9 : CMMs with multiple probing systems - Spécification géométrique des produits (GPS)
2/1/2014 - Paper - French -
Learn More€75.50 -
DIN EN ISO 25178-603:2014-02
Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
2/1/2014 - PDF - English -
Learn More€124.21 -
NF EN ISO 10360-8, E11-150-8 (02/2014)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMS) - Part 8 : CMMs with optical distance sensors - Spécification géométrique des produits (GPS)
2/1/2014 - Paper - French -
Learn More€130.50 -
NBN EN ISO 10360-9:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
1/31/2014 - PDF - German -
Learn More€89.00 -
BS EN ISO 25178-605:2014
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments
1/31/2014 - PDF - English -
Learn More€293.00 -
NBN EN 10049:2014
Measurement of roughness average Ra and peak count RPc on metallic flat products
1/31/2014 - PDF - German -
Learn More€58.00 -
NBN EN ISO 10360-8:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/31/2014 - PDF - German -
Learn More€184.00 -
NBN EN ISO 10360-9:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
1/31/2014 - PDF - English -
Learn More€89.00 -
NBN EN ISO 10360-9:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
1/31/2014 - PDF - French -
Learn More€89.00 -
NBN EN ISO 10360-8:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/31/2014 - PDF - English -
Learn More€184.00 -
NBN EN 10049:2014
Measurement of roughness average Ra and peak count RPc on metallic flat products
1/31/2014 - PDF - English -
Learn More€58.00 -
NBN EN 10049:2014
Measurement of roughness average Ra and peak count RPc on metallic flat products
1/31/2014 - PDF - French -
Learn More€58.00 -
NBN EN ISO 10360-8:2014
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/31/2014 - PDF - French -
Learn More€184.00 -
ISO 25178-605:2014 (R2019)
Geometrical product specifications (GPS)
Surface texture: Areal
1/22/2014 - Paper - French -
Learn More€174.00