17.040 : Linear and angular measurements
-
BS EN ISO 14253-1:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/24/2020 - PDF - English -
Learn More€326.00 -
BS EN ISO 14405-2:2019 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
2/24/2020 - PDF - English -
Learn More€326.00 -
BS EN ISO 8502-4:2017 + Redline
Tracked Changes. Preparation of steel substrates before application paints and related products. Tests for the assessment surface cleanliness Guidance on estimation probability condensation prior to paint
2/24/2020 - PDF - English -
Learn More€382.00 -
BS EN ISO 17201-1:2018 + Redline
Tracked Changes. Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
2/24/2020 - PDF - English -
Learn More€432.00 -
BS EN ISO 1101:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/24/2020 - PDF - English -
Learn More€586.00 -
UNE-EN ISO 16610-61:2015/A1:2020
Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) (Endorsed by Asociación Española de Normalización in February of 2020.)
2/1/2020 - PDF - English -
Learn More€15.00 -
NF ISO 9628, E22-304 (02/2020)
Rolling bearings - Insert bearings and eccentric locking collars - Geometrical product specifications (GPS) and tolerance values
2/1/2020 - Paper - French -
Learn More€86.50 -
BS EN ISO 5458:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
1/29/2020 - PDF - English -
Learn More€454.00 -
NF EN ISO 16610-61/A1, E05-040-61/A1 (01/2020)
Geometrical product specification (GPS) - Filtration - Part 61 : linear areal filters - Gaussian filters - Amendment 1
1/1/2020 - Paper - French -
Learn More€25.67 -
DIN EN ISO 25178-600:2019-12
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019), German version EN ISO 25178-600:2019
12/1/2019 - PDF - German -
Learn More€92.62 -
NF E11-015 (12/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
12/1/2019 - Paper - French -
Learn More€48.00 -
DIN EN ISO 25178-607:2019-12
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments (ISO 25178-607:2019), German version EN ISO 25178-607:2019
12/1/2019 - PDF - German -
Learn More€99.35 -
BS EN ISO 14978:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
11/27/2019 - PDF - English -
Learn More€454.00 -
SAE AMS 2262H:2019-11-05
Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
11/5/2019 - PDF - English -
Learn More€70.00 -
DIN EN ISO 20170:2019-11
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019), German version EN ISO 20170:2019
11/1/2019 - PDF - German -
Learn More€92.62 -
BS EN ISO 25178-607:2019
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (confocal microscopy) instruments
10/25/2019 - PDF - English -
Learn More€250.00 -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - German -
Learn More€89.00 -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - English -
Learn More€89.00 -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - French -
Learn More€89.00 -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
10/2/2019 - PDF - Spanish -
Learn More€74.00 -
DIN EN ISO 25178-73:2019-10
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019), German version EN ISO 25178-73:2019
10/1/2019 - PDF - German -
Learn More€72.80 -
NBN EN 13036-5:2019
Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
9/25/2019 - PDF - German -
Learn More€184.00 -
NBN EN 13036-5:2019
Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
9/25/2019 - PDF - English -
Learn More€184.00 -
NBN EN 13036-5:2019
Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
9/25/2019 - PDF - French -
Learn More€184.00 -
BS EN ISO 13385-1:2019
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
9/24/2019 - PDF - English -
Learn More€250.00 -
BS EN 13036-5:2019
Road and airfield surface characteristics. Test methods Determination of longitudinal unevenness indices
9/12/2019 - PDF - English -
Learn More€348.00 -
DIN EN ISO 286-2:2019-09
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013), German version EN ISO 286-2:2010 + AC:2013
9/1/2019 - PDF - German -
Learn More€131.96 -
NF EN ISO 3743-2, S31-024-2 (09/2019)
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2 : methods for special reverberation test rooms
9/1/2019 - Paper - French -
Learn More€108.33 -
NF EN ISO 13385-1, E11-085-1 (09/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : Pieds à coulisse, caractéristiques de conception et caractéristiques métrologiques
9/1/2019 - Paper - French -
Learn More€75.50 -
DIN EN ISO 286-1:2019-09
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013), German version EN ISO 286-1:2010 + AC:2013
9/1/2019 - PDF - German -
Learn More€115.33 -
NF EN 13036-5, P98-831-5 (09/2019)
Road and airfield surface characteristics - Test methods - Part 5 : determination of longitudinal unevenness indices
9/1/2019 - Paper - French -
Learn More€119.00 -
19/30400877 DC:2019
BS EN IEC 60061-3 AMD58. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
8/7/2019 - PDF - English -
Learn More€24.00 -
ASTM E1911-19
Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
8/1/2019 - PDF - English -
Learn More€51.00 -
ASTM E1911-19 + Redline
Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
8/1/2019 - PDF - English -
Learn More€61.00 -
NBN EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - French -
Learn More€58.00 -
NBN EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - German -
Learn More€58.00 -
NBN EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
7/24/2019 - PDF - English -
Learn More€58.00 -
NBN EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
6/26/2019 - PDF - French -
Learn More€121.00 -
NBN EN ISO 20170:2019
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
6/26/2019 - PDF - English -
Learn More€121.00 -
19/30395140 DC:2019
BS EN ISO 8062-3. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Part 3. General dimensional machining allowances castings
6/24/2019 - PDF - English -
Learn More€24.00 -
BS EN ISO 25178-73:2019
Geometrical product specifications (GPS). Surface texture: Areal Terms and definitions for surface defects on material measures
6/18/2019 - PDF - English -
Learn More€180.00 -
FD ISO/TR 230-11, E60-100-11 (06/2019)
Test code for machine tools - Part 11 : measuring instruments suitable for machine tool geometry tests
6/1/2019 - Paper - French -
Learn More€192.00 -
DIN EN ISO 14405-2:2019-06
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018), German version EN ISO 14405-2:2019
6/1/2019 - PDF - German -
Learn More€92.62 -
DIN EN ISO 14978:2019-06
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018), German version EN ISO 14978:2018
6/1/2019 - PDF - German -
Learn More€126.26 -
NF EN ISO 25178-73, E05-031-73 (06/2019)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures - Spécification géométrique des produits (GPS) - État de surface : surfacique Partie 73 : Mesures matérialisées - Termes et définitions pour défauts de surface
6/1/2019 - Paper - French -
Learn More€48.00 -
NBN EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
5/23/2019 - PDF - German -
Learn More€121.00 -
NBN EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
5/23/2019 - PDF - English -
Learn More€121.00 -
NBN EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
5/23/2019 - PDF - French -
Learn More€121.00 -
NBN EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
5/23/2019 - PDF - English -
Learn More€121.00 -
NBN EN ISO 25178-607:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018)
5/23/2019 - PDF - French -
Learn More€121.00 -
NBN EN ISO 25178-600:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019)
5/23/2019 - PDF - German -
Learn More€121.00 -
BS EN ISO 20170:2019
Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
5/22/2019 - PDF - English -
Learn More€250.00 -
SAE AMS 2261L:2019-05-10
Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
5/10/2019 - PDF - English -
Learn More€83.00 -
ASTM E376-19 + Redline
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
5/1/2019 - PDF - English -
Learn More€61.00 -
NF EN ISO 20170, E04-572 (05/2019)
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control
5/1/2019 - Paper - French -
Learn More€75.50 -
ASTM E376-19
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
5/1/2019 - PDF - English -
Learn More€51.00 -
BS EN ISO 25178-600:2019
Geometrical product specifications (GPS). Surface texture: Areal Metrological characteristics for areal topography measuring methods
4/17/2019 - PDF - English -
Learn More€250.00 -
ISO 20170:2019
Geometrical product specifications (GPS)
Decomposition of geometrical characteristics for manufacturing control
4/11/2019 - Paper - French -
Learn More€148.00 -
ISO 20170:2019
Geometrical product specifications (GPS)
Decomposition of geometrical characteristics for manufacturing control
4/11/2019 - Paper - English -
Learn More€148.00 -
ASTM E3190-19
Standard Practice for Preparation of Fixed Radiological/Surrogate Contamination on Porous Test Coupon Surfaces for Evaluation of Decontamination Techniques
4/1/2019 - PDF - English -
Learn More€51.00 -
NF EN ISO 25178-607, E05-031-607 (04/2019)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 607 : nominal characteristics of non-contact (confocal microscopy) instruments
4/1/2019 - Paper - French -
Learn More€86.67 -
NF E11-098-2 (04/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
4/1/2019 - Paper - French -
Learn More€48.00 -
ASTM E3190-19 + Redline
Standard Practice for Preparation of Fixed Radiological/Surrogate Contamination on Porous Test Coupon Surfaces for Evaluation of Decontamination Techniques
4/1/2019 - PDF - English -
Learn More€61.00 -
NF EN ISO 25178-600, E05-031-600 (04/2019)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 600 : metrological characteristics for areal-topography measuring methods
4/1/2019 - Paper - French -
Learn More€86.67 -
NF E11-098-1 (04/2019)
Geometrical Product Specifications (GPS) - Dimensional measuring equipments - Part 1 : internal micrometer with tow spindles - Metrological and design characteristics - Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel - Partie 1 : micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques
4/1/2019 - Paper - French -
Learn More€60.67 -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
3/27/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
3/27/2019 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 1938-2:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/27/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 14253-1:2019
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
3/27/2019 - PDF - English -
Learn More€88.80 -
BS EN ISO 14978:2018
Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
3/21/2019 - PDF - English -
Learn More€348.00 -
ISO 25178-607:2019
Geometrical product specifications (GPS)
Surface texture: Areal
3/5/2019 - Paper - French -
Learn More€148.00 -
ISO 25178-600:2019
Geometrical product specifications (GPS)
Surface texture: Areal
3/1/2019 - Paper - French -
Learn More€148.00 -
NBN EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/27/2019 - PDF - German -
Learn More€121.00 -
NBN EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/27/2019 - PDF - English -
Learn More€121.00 -
NBN EN ISO 14405-2:2019
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
2/27/2019 - PDF - French -
Learn More€121.00 -
JIS B 0024:2019
Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
2/20/2019 - PDF - Japanese -
Learn More€25.00 -
€47.00
-
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - English -
Learn More€163.00 -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - French -
Learn More€163.00 -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - German -
Learn More€163.00 -
BS EN ISO 14405-2:2019
Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
1/28/2019 - PDF - English -
Learn More€250.00 -
BS EN ISO 17201-1:2018
Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement
1/4/2019 - PDF - English -
Learn More€331.00 -
€204.00
-
NF EN ISO 14405-2, E04-563-2 (01/2019)
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear or angular sizes
1/1/2019 - Paper - French -
Learn More€86.67 -
ASTM D6274-18
Standard Guide for Conducting Borehole Geophysical Logging - Gamma
12/15/2018 - PDF - English -
Learn More€57.00 -
ASTM D6274-18 + Redline
Standard Guide for Conducting Borehole Geophysical Logging - Gamma
12/15/2018 - PDF - English -
Learn More€68.00 -
ISO 14405-2:2018 (R2024)
Geometrical product specifications (GPS)
Dimensional tolerancing
12/14/2018 - Paper - French -
Learn More€148.00 -
ISO 14405-2:2018 (R2024)
Geometrical product specifications (GPS)
Dimensional tolerancing
12/14/2018 - Paper - English -
Learn More€148.00 -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - English -
Learn More€85.20 -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - Spanish -
Learn More€71.00 -
NF EN ISO 14978, E11-001 (12/2018)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
12/1/2018 - Paper - French -
Learn More€119.00 -
DIN 50990:2018-12
Measurement of coating thickness - Measurement of the area-related mass of metallic layers by means of spectrometric measurement methods
12/1/2018 - PDF - German -
Learn More€59.63 -
ISO 14978:2018 (R2024)
Geometrical product specifications (GPS)
General concepts and requirements for GPS measuring equipment
11/28/2018 - Paper - French -
Learn More€199.00 -
DIN EN ISO 5458:2018-11
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018), German version EN ISO 5458:2018
11/1/2018 - PDF - German -
Learn More€126.26 -
DIN EN ISO 5458:2018-11
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
11/1/2018 - PDF - English -
Learn More€157.66 -
XP E10-100-2 (10/2018)
Geometrical product specifications (GPS) - Dimensional measuring methods - Part 2 : evaluation of the geometrical deviations
10/1/2018 - Paper - French -
Learn More€154.67 -
UNE-EN ISO 14405-1:2018
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/19/2018 - PDF - Spanish -
Learn More€106.00 -
UNE-EN ISO 14405-1:2018
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
9/19/2018 - PDF - English -
Learn More€127.20 -
DIN EN ISO 14253-2:2018-09
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011), German version EN ISO 14253-2:2011
9/1/2018 - PDF - German -
Learn More€174.39 -
DIN EN ISO 15530-3:2018-09
Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011), German version EN 15530-3:2011
9/1/2018 - PDF - German -
Learn More€85.79 -
NBN EN ISO 5458:2018
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
7/25/2018 - PDF - French -
Learn More€163.00 -
NBN EN ISO 5458:2018
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
7/25/2018 - PDF - German -
Learn More€163.00 -
NBN EN ISO 5458:2018
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
7/25/2018 - PDF - English -
Learn More€163.00 -
DIN 2241:2018-07
Geometrical product specifications (GPS) - Thread setting gauges for measuring instruments for ISO metric screw threads, setting plug gauges and setting ring gauges from 1 mm to 100 mm nominal thread diameter
7/1/2018 - PDF - German -
Learn More€52.90 -
DIN EN ISO 14253-1:2018-07
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017), German version EN ISO 14253-1:2017
7/1/2018 - PDF - German -
Learn More€92.62 -
DIN 878:2018-07
Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for measurement errors
7/1/2018 - PDF - German -
Learn More€32.34 -
18/30379226 DC:2018
BS EN IEC 60061-3 AMD57. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
6/22/2018 - PDF - English -
Learn More€24.00 -
BS EN ISO 5458:2018
Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
6/11/2018 - PDF - English -
Learn More€348.00 -
NF EN ISO 5458, E04-559 (06/2018)
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification - Spécification géométrique des produits (GPS) - Tolérancement géométrique - Partie 2 : tolérancement de position et de motif
6/1/2018 - Paper - French -
Learn More€108.33 -
NF ISO 12297-2, E22-382-2 (06/2018)
Rolling bearings - Cylindrical rollers - Part 2 : boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers - Roulements - Rouleaux cylindriques - Partie 2 : Rouleaux en céramique - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
6/1/2018 - Paper - French -
Learn More€73.23 -
ISO 5458:2018 (R2023)
Geometrical product specifications (GPS)
Geometrical tolerancing
5/24/2018 - Paper - French -
Learn More€199.00 -
ISO 5458:2018 (R2023)
Geometrical product specifications (GPS)
Geometrical tolerancing
5/24/2018 - Paper - English -
Learn More€199.00 -
18/30376927 DC:2018
BS EN 60061-3 AMD56. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
5/3/2018 - PDF - English -
Learn More€24.00 -
DIN EN ISO 17450-4:2018-05
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017), German version EN ISO 17450-4:2018
5/1/2018 - PDF - German -
Learn More€79.72 -
DIN EN ISO 17450-4:2018-05
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
5/1/2018 - PDF - English -
Learn More€99.44 -
PD ISO/TS 21619:2018
Geometrical product specifications (GPS). Types of documents with GPS
4/17/2018 - PDF - English -
Learn More€180.00 -
ISO/TS 21619:2018 (R2021)
Geometrical product specifications (GPS)
Types of documents with GPS
3/28/2018 - Paper - English -
Learn More€72.00 -
UNE-EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English -
Learn More€60.00 -
NBN EN ISO 17450-4:2018
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - English -
Learn More€89.00 -
NBN EN ISO 17450-4:2018
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - French -
Learn More€89.00 -
NBN EN ISO 17450-4:2018
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
2/28/2018 - PDF - German -
Learn More€89.00 -
SAE AMS 2253F:2018-02-24
Tolerances Carbon and Alloy Steel Tubing (Stabilized: Feb 2018)
2/24/2018 - PDF - English -
Learn More€70.00 -
TS B 0034-2:2018
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 2: Mobile type fuel oil flow meters
2/20/2018 - PDF - Japanese -
Learn More€50.18 -
BS EN ISO 17450-4:2018
Geometrical product specifications (GPS). Basic concepts characteristics for quantifying GPS deviations
2/20/2018 - PDF - English -
Learn More€250.00 -
€32.50
-
TS B 0034-1:2018
Fuel oil flow meters - Measuring instruments used in transfer or certification - Part 1: Fuel oil flow meters
2/20/2018 - PDF - Japanese -
Learn More€91.91 -
€68.00
-
BS EN ISO 14253-1:2017
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/7/2018 - PDF - English -
Learn More€250.00 -
DIN EN ISO 10360-12:2018-02
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016), German version EN ISO 10360-12:2016
2/1/2018 - PDF - German -
Learn More€126.26 -
DIN EN ISO 10360-12:2018-02
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
2/1/2018 - PDF - English -
Learn More€157.66 -
NBN EN ISO 14253-1:2018
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
1/30/2018 - PDF - French -
Learn More€121.00 -
NBN EN ISO 14253-1:2018
Geometrische Produktspezifikationen (GPS) - Prüfung von Werkstücken und Messgeräten durch Messen - Teil 1: Entscheidungsregeln für den Nachweis von Konformität oder Nichtkonformität mit Spezifikationen (ISO 14253-1:2017)
1/30/2018 - PDF - German -
Learn More€121.00 -
NBN EN ISO 14253-1:2018
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
1/30/2018 - PDF - English -
Learn More€121.00 -
€113.00
-
ASTM D5235-18(2024) + Redline
Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
1/15/2018 - PDF - English -
Learn More€72.00 -
ASTM D5235-18(2024)
Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
1/15/2018 - PDF - English -
Learn More€60.00 -
€0.00
-
€79.00
-
NF EN ISO 17450-4, E04-001-4 (01/2018)
Geometrical product specifications (GPS) - Basic concepts - Part 4 : Geometrical characteristics for quantifying GPS deviations - Spécification géométrique des produits (GPS) - Concepts généraux - Partie 4 : Caractéristiques géométriques pour la quantification des écarts de forme, d'orientation, de position et de battement
1/1/2018 - Paper - French -
Learn More€75.50 -
DIN EN ISO 25178-71:2018-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017), German version EN ISO 25178-71:2017
1/1/2018 - PDF - German -
Learn More€79.72 -
DIN EN ISO 25178-71:2018-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2017)
1/1/2018 - PDF - English -
Learn More€99.44 -
€60.00
-
SAE J 349:2017-12-20
Detection of Surface Imperfections In Ferrous Rods, Bars, Tubes, and Wires (Stabilized: Dec 2017)
12/20/2017 - PDF - English -
Learn More€66.00 -
€110.00
-
€110.00
-
NF EN ISO 14253-1, E10-201-1 (12/2017)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications - Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : Règles de décision pour contrôler la conformité ou la non - conformité à la spécification
12/1/2017 - Paper - French -
Learn More€86.50 -
DIN EN ISO 2360:2017-12
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017), German version EN ISO 2360:2017
12/1/2017 - PDF - German -
Learn More€115.33 -
DIN EN ISO 2360:2017-12
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
12/1/2017 - PDF - English -
Learn More€144.02 -
NBN EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - German -
Learn More€58.00 -
NBN EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - French -
Learn More€58.00 -
NBN EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
11/22/2017 - PDF - English -
Learn More€58.00 -
UNE-EN 13523-8:2017
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
11/2/2017 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 13523-21:2017
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
11/2/2017 - PDF - English -
Learn More€81.60 -
UNE-EN 13523-8:2017
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
11/2/2017 - PDF - English -
Learn More€72.00 -
UNE-EN 13523-21:2017
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
11/2/2017 - PDF - Spanish -
Learn More€68.00 -
ISO 14253-1:2017 (R2023)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
10/31/2017 - Paper - French -
Learn More€148.00 -
ISO 14253-1:2017 (R2023)
Geometrical product specifications (GPS)
Inspection by measurement of workpieces and measuring equipment
10/31/2017 - Paper - English -
Learn More€148.00 -
€159.60
-
€133.00
-
BS EN ISO 25178-71:2017
Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
10/23/2017 - PDF - English -
Learn More€180.00 -
ASTM E3125-17 + Redline
Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range
10/1/2017 - PDF - English -
Learn More€87.00 -
NF EN ISO 25178-71, E05-031-71 (10/2017)
Geometrical product specifications (GPS) - Surface texture : areal - Part 71 : software measurement standards - Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 71 : Étalons logiciels
10/1/2017 - Paper - French -
Learn More€73.00 -
ASTM E3125-17
Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range
10/1/2017 - PDF - English -
Learn More€74.00 -
JIS B 1514-2:2017
Rolling bearings - Geometrical product specifications (GPS) and tolerance values - Part 2: Thrust bearings
9/20/2017 - PDF - Japanese -
Learn More€36.27 -
BS EN ISO 2360:2017
Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method
9/15/2017 - PDF - English -
Learn More€293.00 -
ISO 25178-71:2017 (R2022)
Geometrical product specifications (GPS)
Surface texture: Areal
9/5/2017 - Paper - French -
Learn More€72.00 -
DIN EN ISO 1101:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017), German version EN ISO 1101:2017
9/1/2017 - PDF - German -
Learn More€234.02 -
DIN EN ISO 1660:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
9/1/2017 - PDF - English -
Learn More€157.66 -
DIN EN ISO 1660:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017), German version EN ISO 1660:2017
9/1/2017 - PDF - German -
Learn More€126.26 -
DIN EN ISO 1101:2017-09
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
9/1/2017 - PDF - English -
Learn More€292.52 -
NF EN ISO 25178-72, E05-031-72 (08/2017)
Geometrical product specifications (GPS) - Surface texture : Areal - Part 72 : XML file format x3p
8/1/2017 - Paper - French -
Learn More€86.50 -
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
7/26/2017 - PDF - Spanish -
Learn More€82.00 -
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
7/26/2017 - PDF - English -
Learn More€98.40 -
JIS B 0615-1:2017
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
7/20/2017 - PDF - Japanese -
Learn More€25.00 -
JIS B 0615-2:2017
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
7/20/2017 - PDF - Japanese -
Learn More€25.00 -
NBN EN ISO 25178-72:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
7/19/2017 - PDF - French -
Learn More€121.00 -
NBN EN ISO 25178-72:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
7/19/2017 - PDF - German -
Learn More€121.00 -
NBN EN ISO 25178-72:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
7/19/2017 - PDF - English -
Learn More€121.00 -
UNE-EN 13523-27:2017
Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
7/5/2017 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 13523-27:2017
Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
7/5/2017 - PDF - English -
Learn More€63.60 -
DIN EN ISO 14405-3:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016), German version EN ISO 14405-3:2017
7/1/2017 - PDF - German -
Learn More€99.35 -
DIN EN ISO 14405-3:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
7/1/2017 - PDF - English -
Learn More€124.21 -
UNE-EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English -
Learn More€69.00 -
DIN EN ISO 14405-1:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
7/1/2017 - PDF - English -
Learn More€177.38 -
DIN EN ISO 14405-1:2017-07
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016), German version EN ISO 14405-1:2016
7/1/2017 - PDF - German -
Learn More€141.96 -
€58.00
-
UNE-EN 13523-29:2017
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
6/21/2017 - PDF - English -
Learn More€63.60 -
UNE-EN 13523-12:2017
Coil coated metals - Test methods - Part 12: Resistance to scratching
6/21/2017 - PDF - English -
Learn More€63.60 -
€69.60
-
UNE-EN 13523-29:2017
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
6/21/2017 - PDF - Spanish -
Learn More€53.00 -
UNE-EN 13523-12:2017
Coil coated metals - Test methods - Part 12: Resistance to scratching
6/21/2017 - PDF - Spanish -
Learn More€53.00 -
17/30358444 DC:2017
BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing Part 2. Dimensions other than linear sizes
6/16/2017 - PDF - English -
Learn More€24.00 -
JIS B 0612:2017
Geometrical product specifications (GPS) - Series of conical tapers and taper angles
5/22/2017 - PDF - Japanese -
Learn More€25.00