17.020 : Metrology and measurement in general
-
ASTM E2254-24
Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
3/15/2024 - PDF - English - ASTM
Learn More€52.00 -
ASTM E2254-24 + Redline
Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
3/15/2024 - PDF - English - ASTM
Learn More€63.00 -
ISO/IEC GUIDE 98-1:2024
ISO/IEC GUIDE 98-1:2024 Guide to the expression of uncertainty in measurement - Part 1: Introduction
2/12/2024 - PDF - English - ISOIEC
Learn More€100.00 -
BS ISO 33401:2024
Reference materials. Contents of certificates, labels and accompanying documentation
1/22/2024 - PDF - English - BSI
Learn More€180.00 -
ASTM D6027/D6027M-24
Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes
1/1/2024 - PDF - English - ASTM
Learn More€60.00 -
ASTM D6027/D6027M-24 + Redline
Standard Practice for Calibration/Verification of Linear Displacement Transducers for Geotechnical Purposes
1/1/2024 - PDF - English - ASTM
Learn More€71.00 -
NF EN 14662-1, X43-029-1 (12/2023)
Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 1 : prélèvement par pompage suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
12/1/2023 - Paper - French - AFNOR
Learn More€131.00 -
NBN ISO 5725-1:2023
Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 1: Principes généraux et définitions ISO 5725-1:2023
11/13/2023 - PDF - French - NBN
Learn More€121.00 -
NBN ISO 5725-1:2023
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions ISO 5725-1:2023
11/13/2023 - PDF - English - NBN
Learn More€121.00 -
FD X07-025 (11/2023)
Métrologie - Programmes techniques minimaux de vérification métrologique des équipements de mesure - Règles générales et application aux domaines Électricité et Fréquence
11/1/2023 - Paper - French - AFNOR
Learn More€206.00 -
PD IEC GUIDE 115:2023 + Redline
Tracked Changes. Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector
10/5/2023 - PDF - English - BSI
Learn More€326.00 -
NBN ISO 5725-3:2023
Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 3: Fidélité intermédiaire et plans alternatifs pour les études collaboratives ISO 5725-3:2023
10/3/2023 - PDF - French - NBN
Learn More€184.00 -
NBN ISO 5725-3:2023
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies ISO 5725-3:2023
10/3/2023 - PDF - English - NBN
Learn More€184.00 -
PD IEC GUIDE 115:2023
Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector
9/27/2023 - PDF - English - BSI
Learn More€250.00 -
€69.00
-
€82.80
-
ASTM F2537-23
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
9/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM F2537-23 + Redline
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
9/1/2023 - PDF - English - ASTM
Learn More€63.00 -
NF ISO 5725-3, X06-041-3 (08/2023)
Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 3 : fidélité intermédiaire et plans alternatifs pour les études collaboratives
8/1/2023 - Paper - French - AFNOR
Learn More€130.67 -
NF ISO 5725-1, X06-041-1 (08/2023)
Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 1 : principes généraux et définitions
8/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
BS ISO 5725-1:2023 + Redline
Tracked Changes. Accuracy (trueness and precision) of measurement methods results General principles definitions
7/27/2023 - PDF - English - BSI
Learn More€326.00 -
BS ISO 5725-1:2023
Accuracy (trueness and precision) of measurement methods results General principles definitions
7/24/2023 - PDF - English - BSI
Learn More€250.00 -
BS ISO 5725-3:2023 + Redline
Tracked Changes. Accuracy (trueness and precision) of measurement methods results Intermediate precision alternative designs for collaborative studies
7/19/2023 - PDF - English - BSI
Learn More€454.00 -
UNE 82210:2023
Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
7/5/2023 - PDF - Spanish - AENOR
Learn More€71.00 -
BS ISO 5725-3:2023
Accuracy (trueness and precision) of measurement methods results Intermediate precision alternative designs for collaborative studies
7/4/2023 - PDF - English - BSI
Learn More€348.00 -
XP ISO/TS 27878, X06-083 (05/2023)
Reproductibilité du niveau de détection (LOD) des méthodes binaires pour des études de validation collaboratives et internes
5/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
IEC GUIDE 115:2023
IEC GUIDE 115:2023 Application of measurement uncertainty to conformity assessment activities in the electrotechnical sector
4/12/2023 - PDF - English, French - IEC
Learn More€173.00 -
€250.00
-
PD ISO/TS 27878:2023
Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
2/15/2023 - PDF - English - BSI
Learn More€250.00 -
NBN ISO 24185:2023
Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé ISO 24185:2022
1/17/2023 - PDF - French - NBN
Learn More€89.00 -
XP ISO/TS 23471, X06-084 (01/2023)
Plans d'expériences pour l'évaluation de l'incertitude - Utilisation de plans factoriels pour la détermination des fonctions d'incertitude
1/1/2023 - Paper - French - AFNOR
Learn More€86.67 -
DIN EN ISO 23131:2023-01
Ellipsometry - Principles (ISO 23131:2021), German version EN ISO 23131:2022
1/1/2023 - PDF - German - DIN
Learn More€85.79 -
ILAC-G24:2022 / OIML D 10:2022
ILAC-G24/OIML D 10: Guidelines for the determination of recalibration intervals of measuring equipment
12/15/2022 - PDF - English - OIML
Learn More€25.00 -
PD ISO/TS 23471:2022
Experimental designs for evaluation of uncertainty. Use of factorial designs for determining uncertainty functions
11/30/2022 - PDF - English - BSI
Learn More€293.00 -
€89.00
-
€89.00
-
€89.00
-
ASTM D3609-22
Standard Practice for Calibration Techniques Using Permeation Tubes
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D3609-22 + Redline
Standard Practice for Calibration Techniques Using Permeation Tubes
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
NF ISO 24185, X06-112 (10/2022)
Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
BS ISO 24185:2022
Evaluation of the uncertainty of measurements from a stationary autocorrelated process
9/7/2022 - PDF - English - BSI
Learn More€250.00 -
ASTM D4298-22
Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
9/1/2022 - PDF - English - ASTM
Learn More€46.00 -
ASTM D4298-22 + Redline
Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
9/1/2022 - PDF - English - ASTM
Learn More€53.00 -
DIN ISO 5725-2:2022-05
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019), Text in German and English
5/1/2022 - PDF - English, German - DIN
Learn More€179.72 -
PD ISO/TR 11843-8:2021
Capability of detection Guidance for the implementation ISO 11843 series
4/27/2022 - PDF - English - BSI
Learn More€331.00 -
ASTM E29-22
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
4/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM E29-22 + Redline
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
4/1/2022 - PDF - English - ASTM
Learn More€61.00 -
ASTM D7783-21
Standard Practice for Within-laboratory Quantitation Estimation (WQE)
11/15/2021 - PDF - English - ASTM
Learn More€57.00 -
ASTM D7783-21 + Redline
Standard Practice for Within-laboratory Quantitation Estimation (WQE)
11/15/2021 - PDF - English - ASTM
Learn More€68.00 -
ASTM D5906-21
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
11/1/2021 - PDF - English - ASTM
Learn More€57.00 -
ASTM D5906-21 + Redline
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
11/1/2021 - PDF - English - ASTM
Learn More€68.00 -
€89.00
-
UNE-EN IEC 61010-2-130:2021
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children
7/1/2021 - PDF - English - AENOR
Learn More€72.00 -
NBN ISO 5725-5:2021
Accuracy (trueness and precision) of measurement methods and results ? Part 5: Alternative methods for the determination of the precision of a standard measurement method
6/24/2021 - PDF - French - NBN
Learn More€184.00 -
NBN ISO 5725-5:2021
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method ISO 5725-5:1998
6/24/2021 - PDF - English - NBN
Learn More€184.00 -
UNE-EN IEC 61010-2-202:2021
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (Endorsed by Asociación Española de Normalización in February of 2021.)
2/1/2021 - PDF - English - AENOR
Learn More€65.00 -
BS EN IEC 61010-2-202:2021
Safety requirements for electrical equipment measurement, control and laboratory use Particular electrically operated valve actuators
1/22/2021 - PDF - English - BSI
Learn More€180.00 -
NF X50-144-3 (01/2021)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 3 : implementation of the tailoring process in mechanical environment
1/1/2021 - Paper - French - AFNOR
Learn More€154.50 -
NF EN IEC 61010-2-202, C42-020-2-202 (01/2021)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
1/1/2021 - Paper - French - AFNOR
Learn More€88.33 -
€100.00
-
IEC 61010-2-202:2020
IEC 61010-2-202:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
11/5/2020 - PDF - English, French - IEC
Learn More€92.00 -
IEC 61010-2-202:2020 + Redline
IEC 61010-2-202:2020 (Redline version) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
11/5/2020 - PDF - English - IEC
Learn More€120.00 -
UNE-EN IEC 62828-4:2020
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
11/1/2020 - PDF - English - AENOR
Learn More€99.00 -
UNE-EN IEC 62828-5:2020
Reference conditions and procedures for testing Industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
11/1/2020 - PDF - English - AENOR
Learn More€76.00 -
NBN ISO 11843-6:2020
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations ISO 11843-6:2019
10/22/2020 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 11843-7:2020
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
10/22/2020 - PDF - English - NBN
Learn More€89.00 -
NF EN IEC 62828-4, C46-828-4 (09/2020)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4 : specific procedures for level transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 4 : Procédures spécifiques pour les transmetteurs de niveau
9/1/2020 - Paper - French - AFNOR
Learn More€170.00 -
NF EN IEC 62828-5, C46-828-5 (09/2020)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5 : specific procedures for flow transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 5 : Procédures spécifiques pour les transmetteurs de débit
9/1/2020 - Paper - French - AFNOR
Learn More€127.67 -
NF ISO 5725-4, X06-041-4 (09/2020)
Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
9/1/2020 - Paper - French - AFNOR
Learn More€86.50 -
NBN ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods and results ? Part 4: Basic methods for the determination of the trueness of a standard measurement method
8/27/2020 - PDF - French - NBN
Learn More€121.00 -
NBN ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method ISO 5725-4:2020
8/27/2020 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 5725-2:2020
Accuracy (trueness and precision) of measurement methods and results ? Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
8/27/2020 - PDF - French - NBN
Learn More€184.00 -
NBN ISO 5725-2:2020
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method ISO 5725-2:2019
8/27/2020 - PDF - English - NBN
Learn More€184.00 -
NF E11-011 (08/2020)
Dimensional measuring equipment - Plain ring standard gauges, plain plug standard gauges and standard discs
8/1/2020 - Paper - French - AFNOR
Learn More€86.67 -
NF ISO 5725-2, X06-041-2 (08/2020)
Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
8/1/2020 - Paper - French - AFNOR
Learn More€144.50 -
NBN ISO 21748:2020
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
6/25/2020 - PDF - French - NBN
Learn More€163.00 -
NBN ISO 21748:2020
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation ISO 21748:2017
6/25/2020 - PDF - English - NBN
Learn More€163.00 -
NBN ISO/TS 28038:2020
Determination and use of polynomial calibration functions ISO/TS 28038:2018
5/27/2020 - PDF - English - NBN
Learn More€184.00 -
NF E11-020 (04/2020)
Length measuring instruments - Limit gauges and working standards - Terminology - Shortened designation
4/1/2020 - Paper - French - AFNOR
Learn More€60.67 -
BS ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods results Basic for the determination trueness a standard method
3/27/2020 - PDF - English - BSI
Learn More€293.00 -
BS ISO 11843-7:2018 + Redline
Tracked Changes. Capability of detection Methodology based on stochastic properties instrumental noise
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS ISO 21748:2017 + Redline
Tracked Changes. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
2/26/2020 - PDF - English - BSI
Learn More€454.00 -
BS EN IEC 61010-2-201:2018 + Redline
Tracked Changes. Safety requirements for electrical equipment measurement, control, and laboratory use Particular control
2/25/2020 - PDF - English - BSI
Learn More€492.00 -
BS ISO 11843-6:2019 + Redline
Tracked Changes. Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS ISO 5725-2:2019
Accuracy (trueness and precision) of measurement methods results Basic method for the determination repeatability reproducibility a standard
12/20/2019 - PDF - English - BSI
Learn More€377.00 -
NF E11-015 (12/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
12/1/2019 - Paper - French - AFNOR
Learn More€48.00 -
ISO 80000-11:2019
ISO 80000-11:2019 Quantities and units - Part 11: Characteristic numbers
10/22/2019 - PDF - English - ISOIEC
Learn More€180.00 -
ISO 80000-11:2019
ISO 80000-11:2019 Quantities and units - Part 11: Characteristic numbers
10/22/2019 - PDF - French - ISOIEC
Learn More€180.00 -
€63.00
-
€86.00
-
€107.00
-
FD X07-041 (07/2019)
Monitoring of measuring instruments - Inter-Instrument Comparisons (C2l) - Conditions of implementation and limits of application
7/1/2019 - Paper - French - AFNOR
Learn More€99.33 -
NF X50-144-1 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 1 : basis of the General Environmental Management Plan
7/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
NF X50-144-2 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 2 : guidelines for the environmental project tailoring
7/1/2019 - Paper - French - AFNOR
Learn More€86.67 -
NF X50-144-5 (07/2019)
Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 5 : safety factor
7/1/2019 - Paper - French - AFNOR
Learn More€108.33 -
NF X50-144-6 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 6 : test factors
7/1/2019 - Paper - French - AFNOR
Learn More€108.33 -
BS ISO 11843-6:2019
Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
2/27/2019 - PDF - English - BSI
Learn More€250.00 -
PD ISO/TS 28038:2018
Determination and use of polynomial calibration functions
12/21/2018 - PDF - English - BSI
Learn More€348.00 -
ASTM E3076-18e1
Standard Practice for Determination of the Slope in the Linear Region of a Test Record
11/15/2018 - PDF - English - ASTM
Learn More€54.00 -
ASTM E3076-18e1 + Redline
Standard Practice for Determination of the Slope in the Linear Region of a Test Record
11/15/2018 - PDF - English - ASTM
Learn More€65.00 -
FD X07-039 (10/2018)
Role of measurement uncertainty in conformity assessment - Implementation of NF ISO/IEC Guide 98-4 - Illustration through industrial case studies - Rôle de l'incertitude de mesure dans l'évaluation de la conformité - Mise en œuvre de la norme NF ISO/IEC Guide 98-4 - Illustration au travers d'études de cas industriels
10/1/2018 - Paper - French - AFNOR
Learn More€108.33 -
BS ISO 11843-7:2018
Capability of detection Methodology based on stochastic properties instrumental noise
9/7/2018 - PDF - English - BSI
Learn More€250.00 -
UNE-EN IEC 62828-3:2018
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (Endorsed by Asociación Española de Normalización in August of 2018.)
8/1/2018 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN IEC 61010-2-201:2018
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in August of 2018.)
8/1/2018 - PDF - English - AENOR
Learn More€116.00 -
BS EN IEC 61010-2-201:2018
Safety requirements for electrical equipment measurement, control, and laboratory use Particular control
7/6/2018 - PDF - English - BSI
Learn More€377.00 -
BS EN IEC 62828-1:2018
Reference conditions and procedures for testing industrial process measurement transmitters General all types of
5/24/2018 - PDF - English - BSI
Learn More€377.00 -
DIN 32937:2018-04 + Redline
Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
4/1/2018 - PDF - German - DIN
Learn More€95.70 -
DIN 32937:2018-04
Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
4/1/2018 - PDF - German - DIN
Learn More€79.72 -
UNE-EN IEC 62828-1:2018
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More€122.00 -
UNE-EN IEC 62828-2:2018
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN 62974-1:2018
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
2/28/2018 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 62974-1:2018
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
2/28/2018 - PDF - English - AENOR
Learn More€91.20 -
JIS Z 8462-6:2018
Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
2/20/2018 - PDF - Japanese - JSA
Learn More€36.27 -
JIS Z 8462-7:2018
Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
2/20/2018 - PDF - Japanese - JSA
Learn More€36.27 -
VDI/VDE 2600 Blatt 2:2018-02
Management of measurement processes - Determination of the uncertainty of measurement of complex inspection processes
2/1/2018 - PDF - German - VDI
Learn More€122.25 -
ASTM E2617-17
Standard Practice for Validation of Empirically Derived Multivariate Calibrations
12/15/2017 - PDF - English - ASTM
Learn More€57.00 -
ASTM E2617-17 + Redline
Standard Practice for Validation of Empirically Derived Multivariate Calibrations
12/15/2017 - PDF - English - ASTM
Learn More€68.00 -
XP X50-144-4 (12/2017)
Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 4 : Implementation of the customisation process in the climatic environment
12/1/2017 - Paper - French - AFNOR
Learn More€99.33 -
ASTM F2216-17a
Standard Specification for Selectorized Strength Equipment
12/1/2017 - PDF - English - ASTM
Learn More€57.00 -
ASTM F2216-17a + Redline
Standard Specification for Selectorized Strength Equipment
12/1/2017 - PDF - English - ASTM
Learn More€68.00 -
ASTM F2277-17a
Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
12/1/2017 - PDF - English - ASTM
Learn More€57.00 -
ASTM F2277-17a + Redline
Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
12/1/2017 - PDF - English - ASTM
Learn More€68.00 -
BS ISO 11843-5:2008+A1:2017
Capability of detection Methodology in the linear and non-linear calibration cases
11/24/2017 - PDF - English - BSI
Learn More€250.00 -
IEC 62828-1:2017
IEC 62828-1:2017 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
11/10/2017 - PDF - English, French - IEC
Learn More€397.00 -
VDI 2048 Blatt 1:2017-09
Control and quality improvement of process data and their uncertainties by means of correction calculation for operation and acceptance tests
9/1/2017 - PDF - English, German - VDI
Learn More€259.25 -
BS ISO 21748:2017
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
7/10/2017 - PDF - English - BSI
Learn More€348.00 -
NF ISO 21748, X06-067 (07/2017)
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
7/1/2017 - Paper - French - AFNOR
Learn More€108.00 -
NF EN 61010-2-202, C42-020-2-202 (06/2017)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
6/1/2017 - Paper - French - AFNOR
Learn More€88.33 -
ISO 21748:2017 (R2022)
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
General information
4/24/2017 - Paper - French - ISO
Learn More€199.00 -
IEC 61010-2-201:2017
IEC 61010-2-201:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
3/24/2017 - PDF - English, French - IEC
Learn More€397.00 -
IEC 61010-2-201:2017 + Redline
IEC 61010-2-201:2017 (Redline version) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
3/24/2017 - PDF - English - IEC
Learn More€516.00 -
ASTM D6475-17
Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
2/15/2017 - PDF - English - ASTM
Learn More€46.00 -
ASTM D6475-17 + Redline
Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
2/15/2017 - PDF - English - ASTM
Learn More€53.00 -
NF X43-056 (02/2017)
Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Traceability of the measurement results to standards
2/1/2017 - Paper - French - AFNOR
Learn More€75.67 -
€74.00
-
€87.00
-
PD ISO/TR 21074:2016
Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
11/30/2016 - PDF - English - BSI
Learn More€250.00 -
NF EN 14662-3, X43-029-3 (12/2015)
Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography - Qualité de l'air ambiant
12/1/2015 - Paper - French - AFNOR
Learn More€149.66 -
PD ISO/TS 17503:2015
Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs
11/30/2015 - PDF - English - BSI
Learn More€250.00 -
FD ISO/GUIDE 33, X07-033 (06/2015)
Reference materials - Good practice in using reference materials
6/1/2015 - Paper - French - AFNOR
Learn More€99.00 -
€60.50
-
UNE 80407:2014 (R2021)
Metrological control of measuring equipment used in the cement test
10/22/2014 - PDF - Spanish - AENOR
Learn More€73.00 -
NF ISO/IEC GUIDE 98-3, X07-040-3 (07/2014)
Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995) - Incertitude de mesure - Partie 3 : guide pour l'espression de l'incertitude de mesure (GUM : 1995)
7/1/2014 - Paper - French - AFNOR
Learn More€185.50 -
FD CEN/TR 10345, A06-002 (06/2014)
Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods - Guide pour le traitement statistique des données de validation de méthodes d'analyse, issues d'essais interlaboratoire
6/1/2014 - Paper - French - AFNOR
Learn More€101.14 -
ASTM E2655-14(2020)
Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
1/1/2014 - PDF - English - ASTM
Learn More€51.00 -
ASTM E2655-14(2020) + Redline
Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
1/1/2014 - PDF - English - ASTM
Learn More€61.00 -
PD CEN/TR 10345:2013
Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
12/31/2013 - PDF - English - BSI
Learn More€331.00 -
CEN/TR 10345:2013
Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
12/1/2013 - PDF - French - NBN
Learn More€163.00 -
CEN/TR 10345:2013
Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
12/1/2013 - PDF - English - NBN
Learn More€163.00 -
BS EN 62703:2013
Expression of performance of fluorometric oxygen analyzers in liquid media
11/30/2013 - PDF - English - BSI
Learn More€331.00 -
VDI/VDE 2600 Blatt 1:2013-10
Inspection process management - Identification, classification and proof of suitability for inspection processes
10/1/2013 - PDF - English, German - VDI
Learn More€122.25 -
NF ISO/IEC GUIDE 98-4, X07-040-4 (10/2013)
Uncertainty of measurement - Part 4 : role of measurement uncertainty in conformity assessment
10/1/2013 - Paper - French - AFNOR
Learn More€118.00 -
UNE-EN 62703:2013
Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
10/1/2013 - PDF - English - AENOR
Learn More€78.00 -
IEC 62703:2013
IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
6/27/2013 - PDF - English, French - IEC
Learn More€311.00 -
FD X15-140 (05/2013)
Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification - Mesure de l'humidité de l'air
5/1/2013 - Paper - French - AFNOR
Learn More€108.33 -
NF E04-009 (12/2012)
Geometrical product specification (GPS) - Hierarchical organization of product/process characteristics - Spécification géométrique des produits (GPS)
12/1/2012 - Paper - French - AFNOR
Learn More€99.33 -
VDI 2048 Blatt 3:2012-05
Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially preparation of acceptance tests of a gas and steam power plant
5/1/2012 - PDF - English, German - VDI
Learn More€192.25 -
FD X07-023 (05/2012)
Metrology - Evaluation of measurement uncertainty using Monte-Carlo simulations - Principles and application of the Supplement 1 to the GUM - Métrologie
5/1/2012 - Paper - French - AFNOR
Learn More€99.33 -
ASTM D7729-12(2018)e1
Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
1/1/2012 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7729-12(2018)e1 + Redline
Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
1/1/2012 - PDF - English - ASTM
Learn More€61.00 -
JIS Z 8462-5:2011 (R2016)
Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
8/22/2011 - PDF - Japanese - JSA
Learn More€25.00 -
PD IEC/TR 61831:2011
On-line analyser systems. Guide to design and installation
8/19/2011 - PDF - English - BSI
Learn More€377.00 -
IEC TR 61831:2011
IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
8/19/2011 - PDF - English - IEC
Learn More€397.00 -
NF ISO/IEC GUIDE 99, X07-001 (08/2011)
International vocabulary of metrology - Basic and general concepts and associated terms (VIM) - Vocabulaire international de métrologie
8/1/2011 - Paper - English, French - AFNOR
Learn More€151.50 -
FD GUIDE ISO/IEC 98-1, X07-040-1 (08/2011)
Uncertainty of measurement - part 1 : introduction to the expression of uncertainty in measurement
8/1/2011 - Paper - French - AFNOR
Learn More€86.50 -
JIS Q 10012:2011 (R2016)
Measurement management systems - Requirements for measurement processes and measuring equipment
5/20/2011 - PDF - Japanese - JSA
Learn More€36.27 -
DIN ISO 11843-5:2010-08
Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008), Text in German and English
8/1/2010 - PDF - English, German - DIN
Learn More€85.79 -
ASTM D7510-10(2016)e1
Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
1/1/2010 - PDF - English - ASTM
Learn More€46.00 -
ASTM D7510-10(2016)e1 + Redline
Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
1/1/2010 - PDF - English - ASTM
Learn More€53.00 -
BS EN 62419:2009
Control technology. Rules for the designation of measuring instruments
10/31/2009 - PDF - English - BSI
Learn More€180.00 -
€180.00
-
BS ISO 5725-5:1998
Accuracy (trueness and precision) of measurement methods results Alternative for the determination precision a standard method
8/31/2009 - PDF - English - BSI
Learn More€348.00 -
UNE-EN 62419:2009
Control technology - Rules for the designation of measuring instruments (Endorsed by AENOR in May of 2009.)
5/1/2009 - PDF - English - AENOR
Learn More€58.00 -
€57.00
-
€68.00
-
BS 6739:2009 (R2014)
Code of practice for instrumentation in process control systems: installation design and practice
12/31/2008 - PDF - English - BSI
Learn More€449.00 -
IEC 62419:2008
IEC 62419:2008 Control technology - Rules for the designation of measuring instruments
11/5/2008 - PDF - English, French - IEC
Learn More€92.00 -
IEC 62419:2008
IEC 62419:2008 Control technology - Rules for the designation of measuring instruments
11/5/2008 - PDF - English - IEC
Learn More€92.00 -
NF ISO 11843-5, X06-048-5 (07/2008)
Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
7/1/2008 - Paper - French - AFNOR
Learn More€75.67 -
ISO 11843-5:2008 (R2022)
Capability of detection
Part 5: Methodology in the linear and non-linear calibration cases
5/22/2008 - Paper - French - ISO
Learn More€110.00 -
DIN ISO 11095:2008-04
Linear calibration using reference materials (ISO 11095:1996); Text German and English
4/1/2008 - PDF - English, German - DIN
Learn More€136.82 -
BS ISO 11843-2:2000
Capability of detection Methodology in the linear calibration case
3/31/2008 - PDF - English - BSI
Learn More€293.00 -
UNE 66180:2008 (R2016)
Quality management systems. Guide for the metrological management and assessment.
2/27/2008 - PDF - Spanish - AENOR
Learn More€129.00 -
JIS Z 8404-2:2008 (R2017)
Measurement uncertainty - Part 2: Measurement uncertainty for metrological applications - Repeated measurements and nested experiments
1/20/2008 - PDF - Japanese - JSA
Learn More€46.02 -
DD ISO/TS 23165:2006
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
9/28/2007 - PDF - English - BSI
Learn More€293.00 -
PD IEC/TR 62456:2007
An electrochemical reference system for use in different solvent media. The decamethylated ferricinium/ferrocene redox couple
3/29/2007 - PDF - English - BSI
Learn More€151.00 -
IEC TR 62456:2007
IEC TR 62456:2007 An electrochemical reference system for use in different solvent media - The decamethylated ferricinium/ferrocene redox couple
3/29/2007 - PDF - English - IEC
Learn More€23.00 -
XP ISO/TS 23165, E11-170 (12/2006)
Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty - Spécification géométrique des produits (GPS)
12/1/2006 - Paper - French - AFNOR
Learn More€99.33 -
JIS Z 8462-4:2006 (R2016)
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
11/20/2006 - PDF - Japanese - JSA
Learn More€36.27 -
FD X07-014 (11/2006) (R2011)
Metrology - Optimisation of measuring equipment calibration frequencies (metrological confirmation) - Métrologie
11/1/2006 - Paper - French - AFNOR
Learn More€86.67 -
ISO/TS 23165:2006 (R2023)
Geometrical product specifications (GPS)
Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
7/13/2006 - Paper - French - ISO
Learn More€174.00 -
DIN ISO 11843-2:2006-06
Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
6/1/2006 - PDF - English, German - DIN
Learn More€110.00 -
DIN ISO 11843-3:2006-06
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used (ISO 11843-3:2003; text in German, English)
6/1/2006 - PDF - English, German - DIN
Learn More€85.79 -
DIN ISO 11843-4:2006-06
Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value (ISO 11843-4:2003; text in German, English)
6/1/2006 - PDF - English, German - DIN
Learn More€79.72 -
JIS Z 8462-3:2006 (R2015)
Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
1/20/2006 - PDF - Japanese - JSA
Learn More€25.00 -
ISA-TR52.00.01:2006
Recommended Environments for Standards Laboratories
1/1/2006 - PDF sécurisé - English - ISA
Learn More€63.00 -
FD X07-007 (12/2005) (R2010)
Metrology - Implementation guide for NF EN ISO 10012 "Measurement management systems - Requirements for measurement processes and measuring equipment" - Design development, control and improvement of measurement or test processes - Métrologie
12/1/2005 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 14662-5, X43-029-5 (11/2005)
Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography - Qualité de l'air ambiant
11/1/2005 - Paper - French - AFNOR
Learn More€104.50 -
NF EN 14662-2, X43-029-2 (11/2005)
Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography - Qualité de l'air ambiant
11/1/2005 - Paper - French - AFNOR
Learn More€101.14 -
NF EN 14662-4, X43-029-4 (11/2005)
Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography - Qualité de l'air ambiant
11/1/2005 - Paper - French - AFNOR
Learn More€104.50