17.020 : Metrology and measurement in general
-
PR NF ISO 11843-7, X06-048-7PR (01/2024)
Capacité de détection - Partie 7 : méthodologie basée sur les propriétés stochastiques du bruit instrumental
1/1/2024 - Paper - English, French - AFNOR
Learn More€88.50 -
NF EN 14662-1, X43-029-1 (12/2023)
Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 1 : prélèvement par pompage suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
12/1/2023 - Paper - French - AFNOR
Learn More€131.00 -
FD X07-025 (11/2023)
Métrologie - Programmes techniques minimaux de vérification métrologique des équipements de mesure - Règles générales et application aux domaines Électricité et Fréquence
11/1/2023 - Paper - French - AFNOR
Learn More€206.00 -
NF ISO 5725-3, X06-041-3 (08/2023)
Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 3 : fidélité intermédiaire et plans alternatifs pour les études collaboratives
8/1/2023 - Paper - French - AFNOR
Learn More€130.67 -
NF ISO 5725-1, X06-041-1 (08/2023)
Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 1 : principes généraux et définitions
8/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
PR NF ISO/IEC GUIDE 98-1, X07-040-1PR (08/2023)
Guide pour l'expression de l'incertitude de mesure - Partie 1 : introduction
8/1/2023 - Paper - English, French - AFNOR
Learn More€80.50 -
XP ISO/TS 27878, X06-083 (05/2023)
Reproductibilité du niveau de détection (LOD) des méthodes binaires pour des études de validation collaboratives et internes
5/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
XP ISO/TS 23471, X06-084 (01/2023)
Plans d'expériences pour l'évaluation de l'incertitude - Utilisation de plans factoriels pour la détermination des fonctions d'incertitude
1/1/2023 - Paper - French - AFNOR
Learn More€86.67 -
NF ISO 24185, X06-112 (10/2022)
Évaluation de l'incertitude de mesure d'un processus stationnaire autocorrélé
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF X50-144-3 (01/2021)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 3 : implementation of the tailoring process in mechanical environment
1/1/2021 - Paper - French - AFNOR
Learn More€154.50 -
NF EN IEC 61010-2-202, C42-020-2-202 (01/2021)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
1/1/2021 - Paper - French - AFNOR
Learn More€88.33 -
NF EN IEC 62828-4, C46-828-4 (09/2020)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4 : specific procedures for level transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 4 : Procédures spécifiques pour les transmetteurs de niveau
9/1/2020 - Paper - French - AFNOR
Learn More€170.00 -
NF EN IEC 62828-5, C46-828-5 (09/2020)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5 : specific procedures for flow transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 5 : Procédures spécifiques pour les transmetteurs de débit
9/1/2020 - Paper - French - AFNOR
Learn More€127.67 -
NF ISO 5725-4, X06-041-4 (09/2020)
Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
9/1/2020 - Paper - French - AFNOR
Learn More€86.50 -
NF E11-011 (08/2020)
Dimensional measuring equipment - Plain ring standard gauges, plain plug standard gauges and standard discs
8/1/2020 - Paper - French - AFNOR
Learn More€86.67 -
NF ISO 5725-2, X06-041-2 (08/2020)
Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
8/1/2020 - Paper - French - AFNOR
Learn More€144.50 -
NF E11-020 (04/2020)
Length measuring instruments - Limit gauges and working standards - Terminology - Shortened designation
4/1/2020 - Paper - French - AFNOR
Learn More€60.67 -
€46.92
-
NF E11-015 (12/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
12/1/2019 - Paper - French - AFNOR
Learn More€48.00 -
FD X07-041 (07/2019)
Monitoring of measuring instruments - Inter-Instrument Comparisons (C2l) - Conditions of implementation and limits of application
7/1/2019 - Paper - French - AFNOR
Learn More€99.33 -
NF X50-144-1 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 1 : basis of the General Environmental Management Plan
7/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
NF X50-144-2 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 2 : guidelines for the environmental project tailoring
7/1/2019 - Paper - French - AFNOR
Learn More€86.67 -
NF X50-144-5 (07/2019)
Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 5 : safety factor
7/1/2019 - Paper - French - AFNOR
Learn More€108.33 -
NF X50-144-6 (07/2019)
Demonstration of resistance to environmental conditions - Design and carrying out of environmental tests - Part 6 : test factors
7/1/2019 - Paper - French - AFNOR
Learn More€108.33 -
€24.64
-
€90.05
-
FD X07-039 (10/2018)
Role of measurement uncertainty in conformity assessment - Implementation of NF ISO/IEC Guide 98-4 - Illustration through industrial case studies - Rôle de l'incertitude de mesure dans l'évaluation de la conformité - Mise en œuvre de la norme NF ISO/IEC Guide 98-4 - Illustration au travers d'études de cas industriels
10/1/2018 - Paper - French - AFNOR
Learn More€108.33 -
€90.05
-
XP X50-144-4 (12/2017)
Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 4 : Implementation of the customisation process in the climatic environment
12/1/2017 - Paper - French - AFNOR
Learn More€99.33 -
€90.05
-
€75.83
-
€75.83
-
€75.83
-
NF ISO 11843-5/A1, X06-048-5/A1 (09/2017)
Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1
9/1/2017 - Paper - French - AFNOR
Learn More€25.67 -
NF ISO 21748, X06-067 (07/2017)
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
7/1/2017 - Paper - French - AFNOR
Learn More€108.00 -
NF EN 61010-2-202, C42-020-2-202 (06/2017)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
6/1/2017 - Paper - French - AFNOR
Learn More€88.33 -
NF X43-056 (02/2017)
Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Traceability of the measurement results to standards
2/1/2017 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 14662-3, X43-029-3 (12/2015)
Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography - Qualité de l'air ambiant
12/1/2015 - Paper - French - AFNOR
Learn More€149.66 -
FD ISO/GUIDE 33, X07-033 (06/2015)
Reference materials - Good practice in using reference materials
6/1/2015 - Paper - French - AFNOR
Learn More€99.00 -
€60.50
-
NF ISO/IEC GUIDE 98-3, X07-040-3 (07/2014)
Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995) - Incertitude de mesure - Partie 3 : guide pour l'espression de l'incertitude de mesure (GUM : 1995)
7/1/2014 - Paper - French - AFNOR
Learn More€185.50 -
FD CEN/TR 10345, A06-002 (06/2014)
Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods - Guide pour le traitement statistique des données de validation de méthodes d'analyse, issues d'essais interlaboratoire
6/1/2014 - Paper - French - AFNOR
Learn More€101.14 -
NF ISO/IEC GUIDE 98-4, X07-040-4 (10/2013)
Uncertainty of measurement - Part 4 : role of measurement uncertainty in conformity assessment
10/1/2013 - Paper - French - AFNOR
Learn More€118.00 -
FD X15-140 (05/2013)
Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification - Mesure de l'humidité de l'air
5/1/2013 - Paper - French - AFNOR
Learn More€108.33 -
NF E04-009 (12/2012)
Geometrical product specification (GPS) - Hierarchical organization of product/process characteristics - Spécification géométrique des produits (GPS)
12/1/2012 - Paper - French - AFNOR
Learn More€99.33 -
FD X07-023 (05/2012)
Metrology - Evaluation of measurement uncertainty using Monte-Carlo simulations - Principles and application of the Supplement 1 to the GUM - Métrologie
5/1/2012 - Paper - French - AFNOR
Learn More€99.33 -
NF ISO/IEC GUIDE 99, X07-001 (08/2011)
International vocabulary of metrology - Basic and general concepts and associated terms (VIM) - Vocabulaire international de métrologie
8/1/2011 - Paper - English, French - AFNOR
Learn More€151.50 -
FD GUIDE ISO/IEC 98-1, X07-040-1 (08/2011)
Uncertainty of measurement - part 1 : introduction to the expression of uncertainty in measurement
8/1/2011 - Paper - French - AFNOR
Learn More€86.50 -
NF ISO 11843-5, X06-048-5 (07/2008)
Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
7/1/2008 - Paper - French - AFNOR
Learn More€75.67 -
XP ISO/TS 23165, E11-170 (12/2006)
Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty - Spécification géométrique des produits (GPS)
12/1/2006 - Paper - French - AFNOR
Learn More€99.33 -
FD X07-014 (11/2006) (R2011)
Metrology - Optimisation of measuring equipment calibration frequencies (metrological confirmation) - Métrologie
11/1/2006 - Paper - French - AFNOR
Learn More€86.67 -
FD X07-007 (12/2005) (R2010)
Metrology - Implementation guide for NF EN ISO 10012 "Measurement management systems - Requirements for measurement processes and measuring equipment" - Design development, control and improvement of measurement or test processes - Métrologie
12/1/2005 - Paper - French - AFNOR
Learn More€75.67 -
NF EN 14662-5, X43-029-5 (11/2005)
Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography - Qualité de l'air ambiant
11/1/2005 - Paper - French - AFNOR
Learn More€104.50 -
NF EN 14662-2, X43-029-2 (11/2005)
Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography - Qualité de l'air ambiant
11/1/2005 - Paper - French - AFNOR
Learn More€101.14 -
NF EN 14662-4, X43-029-4 (11/2005)
Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography - Qualité de l'air ambiant
11/1/2005 - Paper - French - AFNOR
Learn More€104.50 -
XP ISO/TS 21749, X06-066 (10/2005)
Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments - Incertitude de mesure pour les applications en métrologie
10/1/2005 - Paper - English - AFNOR
Learn More€98.00 -
FD X43-131 (02/2005) (R2010)
Stationary source emissions - Pratical guidance for estimating the incertainty in measurement of pollutant concentrations - Part 1 : General - Part 2 : Automatic measurement - Part 3 : Dust measurement - Part 4 : Manual measurement of a particulate gaseous pollutant sparging - Part 5 : Manual measurement of polycyclic aromatic hydrocarbons and dioxins/furares - Part 6 : Moisture measurement - Part 7 : Measurement of the velocity at the measurement Cross section - Émissions de sources fixes
2/1/2005 - Paper - French - AFNOR
Learn More€212.50 -
FD X15-120 (01/2005) (R2010)
Measurement of air moisture - Expression of uncertainties - Study of concrete cases - Mesure de l'humidité de l'air
1/1/2005 - Paper - French - AFNOR
Learn More€144.67 -
FD X07-022 (12/2004)
Metrology and statistical applications - Use of uncertainties of measurements : presentation of some cases and common practices - Métrologie et applications de la statistique
12/1/2004 - Paper - French - AFNOR
Learn More€108.33 -
FD X43-130 (12/2004)
Stationary source emissions - Guidance for the estimation of the uncertainty of measurement associated with automatic gas measuring systems - QAL 1 Quality check (case of gaseous constituants) - Émissions de sources fixes
12/1/2004 - Paper - French - AFNOR
Learn More€99.33 -
FD X15-111 (05/2004)
Measurement of air moisture - General information on measuring instruments - Selection and use guide - Mesure de l'humidité de l'air
5/1/2004 - Paper - French - AFNOR
Learn More€130.67 -
NF ISO 11843-4, X06-048-4 (03/2004)
Capability of detection - Part 4 : methodology for comparing the minimum detectable value with a given value
3/1/2004 - Paper - French - AFNOR
Learn More€75.50 -
NF E11-018 (10/2003)
Geometrical product specification (GPS) - Calibration specimens - Plugs with grooves - Spécification géométrique des produits (GPS)
10/1/2003 - Paper - French - AFNOR
Learn More€99.33 -
NF ISO 11843-3, X06-048-3 (09/2003)
Capability of detection - Part 3 : methodology for determination of the critical value for the response variable when no calibration data are used
9/1/2003 - Paper - French - AFNOR
Learn More€75.67 -
NF EN ISO 10012, X07-009 (09/2003)
Measurement management systems - Requirements for measurement processes and measuring equipment - Systèmes de management de la mesure
9/1/2003 - Paper - French - AFNOR
Learn More€99.33 -
NF E11-019 (12/2002)
Geometrical product specification (GPS) - Specific standards - Rules of design and characteristics - Spécification géométrique des produits (GPS)
12/1/2002 - Paper - French - AFNOR
Learn More€86.67 -
FD V03-116 (06/2001) (R2005)
Analysis of agricultural and food products - Guide for application of metrological data
6/1/2001 - Paper - French - AFNOR
Learn More€108.33 -
FD X07-019 (12/2000) (R2010)
Metrology - Customer/supplier relations in metrology - Métrologie
12/1/2000 - Paper - French - AFNOR
Learn More€119.00 -
NF ISO 11843-2, X06-048-2 (09/2000)
Capability of detection - Part 2 : methodology in the linear calibration case
9/1/2000 - Paper - French - AFNOR
Learn More€108.33 -
FD X07-021 (10/1999) (R2004)
Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty - Normes fondamentales
10/1/1999 - Paper - French - AFNOR
Learn More€154.67 -
NF ISO 11843-1, X06-048-1 (12/1998)
Capacity of detection - Part 1 : terms and definitions
12/1/1998 - Paper - English, French - AFNOR
Learn More€78.50 -
NF ISO 5725-5, X06-041-5 (10/1998)
Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods - Application de la statistique
10/1/1998 - Paper - French - AFNOR
Learn More€144.50 -
NF E11-017 (12/1996) (R2002)
Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods. - Spécification géométrique des produits (GPS)
12/1/1996 - Paper - French - AFNOR
Learn More€60.67 -
FD X07-013 (12/1996)
Metrology. Company metrology. Criteria of choice between verification and calibration, use and storage of the measurement results. - Métrologie
12/1/1996 - Paper - French - AFNOR
Learn More€86.67 -
FD X07-012 (11/1995)
Metrology. Company metrology. Calibration certificate of the measuring means. - Métrologie
11/1/1995 - Paper - French - AFNOR
Learn More€86.67 -
NF ISO 5725-6, X06-041-6 (12/1994)
Application of statistics - Accuracy (trueness and precision) of measurement methods and results - Part 6 : use in practice of accuracy values - Application de la statistique
12/1/1994 - Paper - French - AFNOR
Learn More€130.67 -
X07-011 (12/1994) (R2004)
Metrology. Tests. Company metrology. Checking report of means of measurement. - Métrologie - Essais
12/1/1994 - Paper - French - AFNOR
Learn More€60.67