17.020 : Metrology and measurement in general

Items 1 to 200 of 371 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • 20/30400313 DC:2020

    BS ISO 23131. Ellipsometry. Principles
    5/12/2020 - PDF - English - BSI
    Learn More
    €23.70

  • PR NF EN IEC 61010-2-202, C42-020-2-202PR (04/2020)


    4/1/2020 - Paper - English, French - AFNOR
    Learn More
    €61.17

  • NF E11-020 (04/2020)


    4/1/2020 - Paper - French - AFNOR
    Learn More
    €51.24

  • BS ISO 5725-4:2020

    Accuracy (trueness and precision) of measurement methods results Basic for the determination trueness a standard method
    3/27/2020 - PDF - English - BSI
    Learn More
    €253.59

  • BS ISO 11843-7:2018 + Redline

    Tracked Changes. Capability of detection Methodology based on stochastic properties instrumental noise
    2/27/2020 - PDF - English - BSI
    Learn More
    €280.37

  • BS ISO 21748:2017 + Redline

    Tracked Changes. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
    2/26/2020 - PDF - English - BSI
    Learn More
    €391.29

  • BS EN IEC 61010-2-201:2018 + Redline

    Tracked Changes. Safety requirements for electrical equipment measurement, control, and laboratory use Particular control
    2/25/2020 - PDF - English - BSI
    Learn More
    €422.10

  • BS ISO 11843-6:2019 + Redline

    Tracked Changes. Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
    2/24/2020 - PDF - English - BSI
    Learn More
    €280.37

  • La Métrologie en 50 questions


    1/3/2020 - Paper - French - AFNOR
    Learn More
    €46.92

  • PR NF ISO 5725-4, X06-041-4PR (01/2020)


    1/1/2020 - Paper - English, French - AFNOR
    Learn More
    €108.02

  • BS ISO 5725-2:2019

    Accuracy (trueness and precision) of measurement methods results Basic method for the determination repeatability reproducibility a standard
    12/20/2019 - PDF - English - BSI
    Learn More
    €324.69

  • 19/30394199 DC:2019

    BS EN 61010-2-201. Safety requirements for electrical equipment measurement, control, and laboratory use Part 2-201. Particular control
    12/6/2019 - PDF - English - BSI
    Learn More
    €23.70

  • NF E11-015 (12/2019)

    Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel : broches à bouts sphériques - Caractéristiques de conception et caractéristiques métrologiques
    12/1/2019 - Paper - French - AFNOR
    Learn More
    €40.69

  • ISO 80000-11:2019

    ISO 80000-11:2019 Quantities and units - Part 11: Characteristic numbers
    10/22/2019 - PDF - English - ISO
    Learn More
    €165.00

  • IEEE 528:2019

    IEEE Standard for Inertial Sensor Terminology
    10/8/2019 - PDF - English - IEEE
    Learn More
    €59.22

  • IEEE 528:2019

    IEEE Standard for Inertial Sensor Terminology
    10/8/2019 - Paper - English - IEEE
    Learn More
    €100.58

  • IEEE 528:2019 + Redline

    IEEE Standard for Inertial Sensor Terminology
    10/8/2019 - PDF - English - IEEE
    Learn More
    €80.84

  • PR NF X50-144-3, X50-144-3PR (10/2019)


    10/1/2019 - Paper - French - AFNOR
    Learn More
    €116.74

  • PR NF E11-011, E11-011PR (09/2019)


    9/1/2019 - Paper - French - AFNOR
    Learn More
    €69.44

  • 19/30394203 DC:2019

    BS EN IEC 61010-2-202. Safety requirements for electrical equipment measurement, control and laboratory use Part 2-202. Particular electrically operated valve actuators
    8/20/2019 - PDF - English - BSI
    Learn More
    €23.70

  • NF X50-144-1 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 1 : bases de la démarche pour la prise en compte de l'environnement général - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 1 : Bases de la démarche pour la prise en compte de l'environnement général
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €64.01

  • NF X50-144-2 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 2 : guide de la démarche de personnalisation en environnement - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 2 : Guide de la démarche de personnalisation en environnement
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF X50-144-5 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 5 : coefficient de garantie - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 5 : Coefficient de garantie
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €91.50

  • NF X50-144-6 (07/2019)

    Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 6 : facteur d'essai
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €91.50

  • FD X07-041 (07/2019)

    Surveillance des instruments de mesure - Les Comparaisons Inter-Instruments (C2l) - Conditions de mises en oeuvre et limites d'application
    7/1/2019 - Paper - French - AFNOR
    Learn More
    €84.02

  • PR NF EN IEC 62828-4, C46-828-4PR (06/2019)

    Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 4: Procédures spécifiques pour les transmetteurs de niveau
    6/1/2019 - Paper - English, French - AFNOR
    Learn More
    €129.70

  • PR NF EN IEC 62828-5, C46-828-5PR (06/2019)

    Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 5 : Procédures spécifiques pour les transmetteurs de débit
    6/1/2019 - Paper - English, French - AFNOR
    Learn More
    €108.39

  • Mesurer pour progresser


    5/2/2019 - Paper - French - AFNOR
    Learn More
    €24.64

  • PR NF ISO 5725-2, X06-041-2PR (04/2019)

    Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 2 : Méthode de base pour la détermination de la répétabilité et de la reproductibilité d'une méthode de mesure normalisée
    4/1/2019 - Paper - English, French - AFNOR
    Learn More
    €150.08

  • Processus de mesure


    3/7/2019 - Paper - French - AFNOR
    Learn More
    €90.05

  • BS ISO 11843-6:2019

    Capability of detection Methodology for the determination critical value and minimum detectable in Poisson distributed measurements by normal approximations
    2/27/2019 - PDF - English - BSI
    Learn More
    €215.67

  • 19/30329300 DC:2019

    BS ISO 5725-2. Accuracy (trueness and precision) of measurement methods results Part 2. Basic method for the determination repeatability reproducibility a standard
    1/30/2019 - PDF - English - BSI
    Learn More
    €23.70

  • 19/30329303 DC:2019

    BS ISO 5725-4. Accuracy (trueness and precision) of measurement methods results Part 4. Basic for the determination trueness a standard method
    1/22/2019 - PDF - English - BSI
    Learn More
    €23.70

  • PD ISO/TS 28038:2018

    Determination and use of polynomial calibration functions
    12/21/2018 - PDF - English - BSI
    Learn More
    €300.99

  • ISO/TS 28038:2018

    Determination and use of polynomial calibration functions
    12/1/2018 - Paper - English - ISO
    Learn More
    €186.00

  • ASTM E3076-18

    Standard Practice for Determination of the Slope in the Linear Region of a Test Record
    11/15/2018 - PDF - English - ASTM
    Learn More
    €47.00

  • FD X07-039 (10/2018)

    Rôle de l'incertitude de mesure dans l'évaluation de la conformité - Mise en oeuvre de la norme NF ISO/IEC Guide 98-4 - Illustration au travers d'études de cas industriels
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €91.50

  • BS ISO 11843-7:2018

    Capability of detection Methodology based on stochastic properties instrumental noise
    9/7/2018 - PDF - English - BSI
    Learn More
    €215.67

  • ASTM E2254-18

    Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
    8/1/2018 - PDF - English - ASTM
    Learn More
    €41.00

  • ASTM E2254-18 + Redline

    Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
    8/1/2018 - PDF - English - ASTM
    Learn More
    €48.00

  • UNE-EN IEC 61010-2-201:2018

    Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €116.00

  • UNE-EN IEC 62828-3:2018

    Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €63.00

  • BS EN IEC 61010-2-201:2018

    Safety requirements for electrical equipment measurement, control, and laboratory use Particular control
    7/6/2018 - PDF - English - BSI
    Learn More
    €324.69

  • BS EN IEC 62828-1:2018

    Reference conditions and procedures for testing industrial process measurement transmitters General all types of
    5/24/2018 - PDF - English - BSI
    Learn More
    €324.69

  • DIN 32937:2018-04

    Control of inspection, measuring and test equipment - Planning, management and use of inspection, measuring and test equipment
    4/1/2018 - - - DIN
    Learn More
    From: €82.60

  • UNE-EN IEC 62828-1:2018

    Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
    3/1/2018 - PDF - English - AENOR
    Learn More
    €122.00

  • UNE-EN IEC 62828-2:2018

    Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
    3/1/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • UNE-EN 62974-1:2018

    Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
    2/28/2018 - PDF - Spanish - AENOR
    Learn More
    €62.00

  • UNE-EN 62974-1:2018

    Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
    2/28/2018 - PDF - English - AENOR
    Learn More
    €74.00

  • JIS Z 8462-6:2018

    Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €36.27

  • JIS Z 8462-7:2018

    Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
    2/20/2018 - PDF - Japanese - JSA
    Learn More
    €36.27

  • NF C46-828-1, NF EN IEC 62828-1 (02/2018)

    Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1 : general procedures for all types of transmitters
    2/9/2018 - PDF - English - UTE
    Learn More
    €161.37

  • L'audit de la fonction Métrologie


    2/1/2018 - Paper - French - AFNOR
    Learn More
    €90.05

  • VDI/VDE 2600 Blatt 2:2018-02

    Management of measurement processes - Determination of the uncertainty of measurement of complex inspection processes
    2/1/2018 - PDF - German - VDI
    Learn More
    €127.14

  • NF EN IEC 62828-1, C46-828-1 (02/2018)

    Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1 : general procedures for all types of transmitters - Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 1 : procédures générales pour tous les types de transmetteurs
    2/1/2018 - Paper - French - AFNOR
    Learn More
    €154.83

  • Handbook n°1 métrologie Industrielle


    1/10/2018 - Paper - French - CRISALIS
    Learn More
    €14.22

  • OIML D 32 Édition 2018 (F)

    Guide for the application of ISO/IEC 17065 to assessment of certification bodies in legal metrology
    1/1/2018 - PDF - French - OIML
    Learn More
    €25.00

  • ASTM E2617-17

    Standard Practice for Validation of Empirically Derived Multivariate Calibrations
    12/15/2017 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM E2617-17 + Redline

    Standard Practice for Validation of Empirically Derived Multivariate Calibrations
    12/15/2017 - PDF - English - ASTM
    Learn More
    €62.00

  • XP X50-144-4 (12/2017)

    Demonstration of the resistance to environmental factors - Design and execution of environmental tests- Part 4 : Implementation of the customisation process in the climatic environment - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 4 : application de la démarche de personnalisation en environnement climatique
    12/1/2017 - Paper - French - AFNOR
    Learn More
    €84.02

  • ASTM F2216-17a

    Standard Specification for Selectorized Strength Equipment
    12/1/2017 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2216-17a + Redline

    Standard Specification for Selectorized Strength Equipment
    12/1/2017 - PDF - English - ASTM
    Learn More
    €62.00

  • ASTM F2277-17a

    Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
    12/1/2017 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM F2277-17a + Redline

    Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
    12/1/2017 - PDF - English - ASTM
    Learn More
    €62.00

  • API MPMS 13.3:2017

    Manual of Petroleum Measurement Standards Chapter 13.3 Measurement Uncertainty
    12/1/2017 - PDF sécurisé - English - API
    Learn More
    €118.90

  • BS ISO 11843-5:2008+A1:2017

    Capability of detection Methodology in the linear and non-linear calibration cases
    11/24/2017 - PDF - English - BSI
    Learn More
    €215.67

  • IEC 62828-1:2017

    IEC 62828-1:2017 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
    11/10/2017 - PDF - English, French - IEC
    Learn More
    €315.00

  • BS EN 61010-2-202:2017

    Safety requirements for electrical equipment measurement, control and laboratory use Particular electrically operated valve actuators
    10/12/2017 - PDF - English - BSI
    Learn More
    €154.05

  • €75.83

  • NF ISO 11843-5/A1, X06-048-5/A1 (09/2017)

    Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1 - Capacité de détection - Partie 5 : Méthodologie des étalonnages linéaire et non linéaire - Amendement 1
    9/1/2017 - Paper - French - AFNOR
    Learn More
    €21.90

  • VDI 2048 Blatt 1:2017-09

    Control and quality improvement of process data and their uncertainties by means of correction calculation for operation and acceptance tests
    9/1/2017 - PDF - English, German - VDI
    Learn More
    €269.62

  • €90.05

  • BS ISO 21748:2017

    Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
    7/10/2017 - PDF - English - BSI
    Learn More
    €300.99

  • NF ISO 21748, X06-067 (07/2017)

    Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation - Lignes directrices relatives à l'utilisation d'estimations de la répétabilité, de la reproductibilité et de la justesse dans l'évaluation de l'incertitude de mesure
    7/1/2017 - Paper - French - AFNOR
    Learn More
    €91.50

  • NF C42-020-2-202, NF EN 61010-2-202 (06/2017)

    Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators
    6/10/2017 - PDF - English - UTE
    Learn More
    €77.83

  • NF EN 61010-2-202, C42-020-2-202 (06/2017)

    Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202 : particular requirements for electrically operated valve actuators - Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-202 : exigences particulières pour les actionneurs à vanne à commande électrique
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €74.67

  • UNE-EN 61010-2-202:2017

    Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (Endorsed by Asociación Española de Normalización in June of 2017.)
    6/1/2017 - PDF - English - AENOR
    Learn More
    €59.00

  • L'accréditation des mesures tridimensionnelles


    5/11/2017 - Paper - French - AFNOR
    Learn More
    €75.83

  • €90.05

  • €75.83

  • €90.05

  • €90.05

  • Surveillance des processus de mesure


    5/11/2017 - Paper - French - AFNOR
    Learn More
    €75.83

  • €75.83

  • Mesure de l'humidité dans les gaz


    5/11/2017 - Paper - French - AFNOR
    Learn More
    €75.83

  • €75.83

  • Mesure 3D - Comment faire son choix ?


    5/11/2017 - Paper - French - AFNOR
    Learn More
    €90.05

  • ISO 11843-5:2008/Amd 1:2017

    Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1
    5/1/2017 - Paper - English - ISO
    Learn More
    €17.00

  • ISO 11843-5:2008/Amd 1:2017

    Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1
    5/1/2017 - Paper - French - ISO
    Learn More
    €17.00

  • ISO 21748:2017

    Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
    4/1/2017 - Paper - English - ISO
    Learn More
    €165.00

  • ISO 21748:2017

    Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
    4/1/2017 - Paper - French - ISO
    Learn More
    €165.00

  • IEC 61010-2-201:2017 + Redline

    IEC 61010-2-201:2017 (Redline version) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
    3/24/2017 - PDF - English - IEC
    Learn More
    €409.00

  • IEC 61010-2-201:2017

    IEC 61010-2-201:2017 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
    3/24/2017 - PDF - English, French - IEC
    Learn More
    €315.00

  • ASTM D6475-17

    Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
    2/15/2017 - PDF - English - ASTM
    Learn More
    €41.00

  • NF X43-056 (02/2017)

    Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Traceability of the measurement results to standards - Air ambiant - Métrologie appliquée au mesurage des polluants atmosphériques gazeux - Raccordement des résultats de mesurage aux étalons
    2/1/2017 - Paper - French - AFNOR
    Learn More
    €64.01

  • €28.91

  • ASTM E2782-17

    Standard Guide for Measurement Systems Analysis (MSA)
    1/1/2017 - PDF - English - ASTM
    Learn More
    €67.00

  • ASTM E2782-17 + Redline

    Standard Guide for Measurement Systems Analysis (MSA)
    1/1/2017 - PDF - English - ASTM
    Learn More
    €80.00

  • PD ISO/TR 21074:2016

    Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
    11/30/2016 - PDF - English - BSI
    Learn More
    €215.67

  • ISO/TR 21074:2016

    Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
    10/1/2016 - Paper - English - ISO
    Learn More
    €92.00

  • IEC 61010-2-202:2016

    IEC 61010-2-202:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
    7/12/2016 - PDF - English, French - IEC
    Learn More
    €71.00

  • La smart metrology


    6/2/2016 - Paper - French - AFNOR
    Learn More
    €21.80

  • €21.80

  • €774.00

  • NF EN 14662-3, X43-029-3 (12/2015)

    Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography - Qualité de l'air ambiant
    12/1/2015 - Paper - French - AFNOR
    Learn More
    €130.82

  • PD ISO GUIDE 31:2015

    Reference materials. Contents of certificates, labels and accompanying documentation
    11/30/2015 - PDF - English - BSI
    Learn More
    €154.05

  • PD ISO/TS 17503:2015

    Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs
    11/30/2015 - PDF - English - BSI
    Learn More
    €215.67

  • NF EN 62419, C46-090 (11/2015)

    Control technology - Rules for the designation of measuring instruments - Technologies de mesure et de commande
    11/1/2015 - Paper - French - AFNOR
    Learn More
    €74.67

  • ISO/TS 17503:2015

    Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
    11/1/2015 - Paper - English - ISO
    Learn More
    €123.00

  • Statistics for Scientists and Engineers

    This book provides the theoretical framework needed to build, analyze and interpret various statistical models. It helps readers choose the correct model, distinguish among various choices that best captures the data, or solve the problem at hand.
    9/1/2015 - Paper - English - WILEY
    Learn More
    €135.00

  • ASTM D6027/D6027M-15

    Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
    7/1/2015 - PDF - English - ASTM
    Learn More
    €47.00

  • FD ISO/GUIDE 33, X07-033 (06/2015)

    Reference materials - Good practice in using reference materials - Matériaux de référence - Bonne pratique d'utilisation des matériaux de référence
    6/1/2015 - Paper - French - AFNOR
    Learn More
    €84.02

  • FD X07-025-2 (04/2015)

    Metrology - Minimum technical programmes for metrological verification of measurement equipment - Part 2 : electricity-magnetism and time-frequency fields - Métrologie - Programmes techniques minimaux de vérification métrologique des équipements de mesure - Partie 2 : domaines électricité-magnétisme et temps-fréquence
    4/1/2015 - Paper - French - AFNOR
    Learn More
    €141.43

  • FD ISO/GUIDE 30, X07-003 (03/2015)

    Reference materials - Selected terms and definitions - Matériaux de référence - Termes et définitions choisis
    3/1/2015 - Paper - French - AFNOR
    Learn More
    €51.24

  • OIML R 126 Errata

    Evidential breath analyzers; Errata
    1/1/2015 - PDF - English - OIML
    Learn More
    €25.00

  • GOST 33702:2015

    Accounting systems of hydrocarbon condensate, liquefied hydrocarbon gas and long distillate of light hydrocarbons. General requirement for procedure of measurements
    1/1/2015 - PDF - English - GOST
    Learn More
    €528.00

  • UNE 80407:2014

    Metrological control of measuring equipment used in the cement test
    10/22/2014 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • ASTM E2655-14 + Redline

    Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
    10/1/2014 - PDF - English - ASTM
    Learn More
    €56.00

  • ASTM E2655-14(2020)

    Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
    10/1/2014 - PDF - English - ASTM
    Learn More
    €47.00

  • NF ISO/IEC GUIDE 98-3, X07-040-3 (07/2014)

    Uncertainly of measurement - Part 3 : guide to the expression of uncertainly in measurement (GUM : 1995) - Incertitude de mesure - Partie 3 : guide pour l'espression de l'incertitude de mesure (GUM : 1995)
    7/1/2014 - Paper - French - AFNOR
    Learn More
    €156.84

  • XP X50-144-3 (07/2014)

    Demonstration of the resistance to environmental factors - Design and execution of environmental tests - Part 3 : implementation of the customisation process in mechanical environment - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 3 : application de la démarche de personnalisation en environnement mécanique
    7/1/2014 - Paper - French - AFNOR
    Learn More
    €100.63

  • FD CEN/TR 10345, A06-002 (06/2014)

    Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods - Guide pour le traitement statistique des données de validation de méthodes d'analyse, issues d'essais interlaboratoire
    6/1/2014 - Paper - French - AFNOR
    Learn More
    €91.50

  • La métrologie, mais c'est très simple !


    1/1/2014 - Paper - French - CRISALIS
    Learn More
    €36.97

  • PD CEN/TR 10345:2013

    Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
    12/31/2013 - PDF - English - BSI
    Learn More
    €284.40

  • CEN/TR 10345:2013

    Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
    12/1/2013 - PDF - English - NBN
    Learn More
    €77.00

  • CEN/TR 10345:2013

    Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
    12/1/2013 - PDF - French - NBN
    Learn More
    €77.00

  • BS EN 62703:2013

    Expression of performance of fluorometric oxygen analyzers in liquid media
    11/30/2013 - PDF - English - BSI
    Learn More
    €284.40

  • BS EN 61010-2-201:2013

    Safety requirements for electrical equipment measurement, control and laboratory use Particular
    11/30/2013 - PDF - English - BSI
    Learn More
    €300.99

  • UNE-EN 61010-2-201:2013/AC:2013

    Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by AENOR in November of 2013.)
    11/1/2013 - PDF - English - AENOR
    Learn More
    €0.00

  • NF ISO/IEC GUIDE 98-4, X07-040-4 (10/2013)

    Uncertainty of measurement - Part 4 : role of measurement uncertainty in conformity assessment
    10/1/2013 - Paper - French - AFNOR
    Learn More
    €110.46

  • VDI/VDE 2600 Blatt 1:2013-10

    Inspection process management - Identification, classification and proof of suitability for inspection processes
    10/1/2013 - PDF - English, German - VDI
    Learn More
    €127.14

  • UNE-EN 62703:2013

    Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
    10/1/2013 - PDF - English - AENOR
    Learn More
    €78.00

  • ASTM E29-13(2019)

    Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    8/1/2013 - PDF - English - ASTM
    Learn More
    €47.00

  • UNE-EN 61010-2-201:2013

    Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (Endorsed by AENOR in July of 2013.)
    7/1/2013 - PDF - English - AENOR
    Learn More
    €94.00

  • IEC 62703:2013

    IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
    6/27/2013 - PDF - English, French - IEC
    Learn More
    €249.00

  • FD X15-140 (05/2013)

    Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification - Mesure de l'humidité de l'air
    5/1/2013 - Paper - French - AFNOR
    Learn More
    €91.50

  • ASTM D7782-13

    Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
    3/28/2013 - PDF - English - ASTM
    Learn More
    €52.00

  • ASTM D7783-13

    Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
    3/28/2013 - PDF - English - ASTM
    Learn More
    €52.00

  • NF ISO 11352, T90-220 (02/2013)

    Water quality - Estimation of measurement uncertainty based on validation and quality control data - Qualité de l'eau
    2/1/2013 - Paper - French - AFNOR
    Learn More
    €73.30

  • ISA-71.04:2013

    Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants
    1/1/2013 - PDF - English - IFI
    Learn More
    €146.00

  • NF E04-009 (12/2012)

    Geometrical product specification (GPS) - Hierarchical organization of product/process characteristics - Spécification géométrique des produits (GPS)
    12/1/2012 - Paper - French - AFNOR
    Learn More
    €84.02

  • FD X07-023 (05/2012)

    Metrology - Evaluation of measurement uncertainty using Monte-Carlo simulations - Principles and application of the Supplement 1 to the GUM - Métrologie
    5/1/2012 - Paper - French - AFNOR
    Learn More
    €84.02

  • VDI 2048 Blatt 3:2012-05

    Uncertainties of measurement during acceptance tests on energy-conversion and power plants - Examples, especially preparation of acceptance tests of a gas and steam power plant
    5/1/2012 - PDF - English, German - VDI
    Learn More
    €199.94

  • ASTM D7729-12(2018)e1

    Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
    4/1/2012 - PDF - English - ASTM
    Learn More
    €47.00

  • UNE-ISO/IEC GUIA 99:2012 IN

    International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
    2/15/2012 - PDF - Spanish - AENOR
    Learn More
    €86.00

  • UNE-ISO/IEC GUIA 98-3:2012 IN

    Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    2/15/2012 - PDF - Spanish - AENOR
    Learn More
    €137.00

  • DIN ISO/TR 22971 DIN SPEC 55318:2012-02

    Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results (ISO/TR 22971:2005); Text in German and English
    2/1/2012 - PDF - English, German - DIN
    Learn More
    €140.40

  • OIML D 1

    Considerations for a Law on Metrology
    1/1/2012 - - - OIML
    Learn More
    €25.00

  • €26.54

  • CNOMO E41.36.115.R:2011

    Capability approval of measurement means / inspection means. Measurement systems for body parts
    10/1/2011 - PDF - English - CNOMO
    Learn More
    €25.00

  • Guide pratique de la métrologie à l'atelier


    9/30/2011 - Paper - French - LEXITIS
    Learn More
    €29.38

  • JIS Z 8462-5:2011 (R2016)

    Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
    8/22/2011 - PDF - Japanese - JSA
    Learn More
    €25.00

  • PD IEC/TR 61831:2011

    On-line analyser systems. Guide to design and installation
    8/19/2011 - PDF - English - BSI
    Learn More
    €324.69

  • IEC TR 61831:2011

    IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
    8/19/2011 - PDF - English - IEC
    Learn More
    €315.00

  • Métrologie avec les normes ISO


    8/12/2011 - Paper - French - HERMES
    Learn More
    €94.79

  • FD GUIDE ISO/IEC 98-1, X07-040-1 (08/2011)

    Uncertainty of measurement - part 1 : introduction to the expression of uncertainty in measurement
    8/1/2011 - Paper - French - AFNOR
    Learn More
    €73.30

  • NF ISO/IEC GUIDE 99, X07-001 (08/2011)

    International vocabulary of metrology - Basic and general concepts and associated terms (VIM) - Vocabulaire international de métrologie
    8/1/2011 - Paper - English, French - AFNOR
    Learn More
    €141.43

  • CNOMO E41.36.110.R:2011


    6/1/2011 - PDF - French - CNOMO
    Learn More
    €25.00

  • JIS Q 10012:2011 (R2016)

    Measurement management systems - Requirements for measurement processes and measuring equipment
    5/20/2011 - PDF - Japanese - JSA
    Learn More
    €36.27

  • OIML D 16

    Principles of assurance of metrological control
    1/1/2011 - PDF - English - OIML
    Learn More
    €25.00

  • DIN ISO 11843-5:2010-08

    Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
    8/1/2010 - PDF - English, German - DIN
    Learn More
    €89.00

  • JIS Z 8402-5/ERRATUM 2:2010

    ERRATUM
    6/2/2010 - PDF - Japanese - JSA
    Learn More
    €0.00

  • ASTM D7510-10(2016)e1

    Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
    5/1/2010 - PDF - English - ASTM
    Learn More
    €41.00

  • JIS Z 8402-5/ERRATUM 1:2010

    ERRATUM
    1/1/2010 - - - JSA
    Learn More
    €0.00

  • BS EN 62419:2009

    Control technology. Rules for the designation of measuring instruments
    10/31/2009 - PDF - English - BSI
    Learn More
    €154.05

  • JIS Z 8402-6/ERRATUM 1:2009

    ERRATUM
    10/14/2009 - - - JSA
    Learn More
    €0.00

  • BS ISO 11843-1:1997

    Capability of detection Terms and definitions
    8/31/2009 - PDF - English - BSI
    Learn More
    €154.05

  • BS ISO 5725-5:1998

    Accuracy (trueness and precision) of measurement methods results Alternative for the determination precision a standard method
    8/31/2009 - PDF - English - BSI
    Learn More
    €300.99

  • UNE-EN 62419:2009

    Control technology - Rules for the designation of measuring instruments (Endorsed by AENOR in May of 2009.)
    5/1/2009 - PDF - English - AENOR
    Learn More
    €58.00

  • BS 6739:2009

    Code of practice for instrumentation in process control systems: installation design and practice
    12/31/2008 - PDF - English - BSI
    Learn More
    €464.52

  • IEC 62419:2008

    IEC 62419:2008 Control technology - Rules for the designation of measuring instruments
    11/5/2008 - PDF - English, French - IEC
    Learn More
    €71.00

  • IEC 62419:2008

    IEC 62419:2008 Control technology - Rules for the designation of measuring instruments
    11/5/2008 - PDF - English - IEC
    Learn More
    €71.00

  • NF ISO 11843-5, X06-048-5 (07/2008)

    Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
    7/1/2008 - Paper - French - AFNOR
    Learn More
    €64.01

  • JIS Z 8103/ERRATUM 1:2008

    ERRATUM
    6/16/2008 - - - JSA
    Learn More
    €0.00

  • ISO 11843-5:2008

    Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
    6/1/2008 - Paper - English - ISO
    Learn More
    €92.00

  • ISO 11843-5:2008

    Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
    6/1/2008 - Paper - French - ISO
    Learn More
    €92.00

  • DIN ISO 11095:2008-04

    Linear calibration using reference materials (ISO 11095:1996); Text German and English
    4/1/2008 - PDF - English, German - DIN
    Learn More
    €141.90

  • BS ISO 11843-2:2000

    Capability of detection Methodology in the linear calibration case
    3/31/2008 - PDF - English - BSI
    Learn More
    €253.59

  • UNE 66180:2008 (R2016)

    Quality management systems. Guide for the metrological management and assessment.
    2/27/2008 - PDF - Spanish - AENOR
    Learn More
    €110.00

  • JIS Z 8404-2:2008 (R2017)

    Measurement uncertainty - Part 2: Measurement uncertainty for metrological applications - Repeated measurements and nested experiments
    1/20/2008 - PDF - Japanese - JSA
    Learn More
    €46.02

  • OIML D 18

    The use of certified reference materials in fields covered by metrological control exercised by national services of legal metrology - Basic principles
    1/1/2008 - PDF - English - OIML
    Learn More
    €25.00

  • OIML D 30

    Guide for the application of ISO/IEC 17025 to the assessment of Testing Laboratories involved in legal metrology
    1/1/2008 - PDF - English - OIML
    Learn More
    €25.00

  • OIML D 31

    General requirements for software controlled measuring instruments
    1/1/2008 - PDF - English - OIML
    Learn More
    €25.00

  • JIS Z 8402-6/ERRATUM 1:2007

    ERRATUM
    12/14/2007 - PDF - Japanese - JSA
    Learn More
    €0.00

  • DD ISO/TS 23165:2006

    Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
    9/28/2007 - PDF - English - BSI
    Learn More
    €253.59

  • IEC GUIDE 115:2007

    IEC GUIDE 115:2007 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
    9/11/2007 - PDF - English, French - IEC
    Learn More
    €147.00

  • JIS Z 8402-5/ERRATUM 1:2007

    ERRATUM
    7/9/2007 - PDF - Japanese - JSA
    Learn More
    €0.00

  • PD IEC/TR 62456:2007

    An electrochemical reference system for use in different solvent media. The decamethylated ferricinium/ferrocene redox couple
    3/29/2007 - PDF - English - BSI
    Learn More
    €130.35

  • IEC TR 62456:2007

    IEC TR 62456:2007 An electrochemical reference system for use in different solvent media - The decamethylated ferricinium/ferrocene redox couple
    3/29/2007 - PDF - English - IEC
    Learn More
    €20.00

  • ASTM D6091-07(2014)

    Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
    3/1/2007 - PDF - English - ASTM
    Learn More
    €52.00

  • OIML D 2 Édition consolidée 2007 (F)

    Legal units of measurement
    1/1/2007 - PDF - English - OIML
    Learn More
    €25.00

  • OIML D 10

    Guidelines for the determination of calibration intervals of measuring instruments
    1/1/2007 - PDF - English - OIML
    Learn More
    €25.00

  • OIML R 107-2

    Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Part 2: Test report format
    1/1/2007 - PDF - English - OIML
    Learn More
    €25.00

  • XP ISO/TS 23165, E11-170 (12/2006)

    Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty - Spécification géométrique des produits (GPS)
    12/1/2006 - Paper - French - AFNOR
    Learn More
    €84.02

  • ASTM F2537-06(2017)

    Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
    12/1/2006 - PDF - English - ASTM
    Learn More
    €41.00

  • JIS Z 8462-4:2006 (R2016)

    Capability of detection - Part 4: Methodology for comparing the minimum detectable value with a given value
    11/20/2006 - PDF - Japanese - JSA
    Learn More
    €36.27

  • FD X07-014 (11/2006)

    Metrology - Optimisation of measuring equipment calibration frequencies (metrological confirmation) - Métrologie
    11/1/2006 - Paper - French - AFNOR
    Learn More
    €73.30

  • ISO/TS 23165:2006

    Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
    7/1/2006 - Paper - English - ISO
    Learn More
    €144.00

  • ISO/TS 23165:2006

    Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
    7/1/2006 - Paper - French - ISO
    Learn More
    €144.00

  • DIN ISO 11843-2:2006-06

    Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
    6/1/2006 - PDF - English, German - DIN
    Learn More
    €114.10

Items 1 to 200 of 371 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2