03.120 : Quality
-
ISO 34101-4:2019
Sustainable and traceable cocoa
Part 4: Requirements for certification schemes
5/6/2019 - Paper - French - ISO
Learn More€174.00 -
€148.00
-
€174.00
-
€199.00
-
€174.00
-
€148.00
-
€199.00
-
€199.00
-
€199.00
-
ISO 39511:2018
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
General information
5/18/2018 - Paper - English - ISO
Learn More€174.00 -
ISO 39511:2018
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
General information
5/18/2018 - Paper - French - ISO
Learn More€174.00 -
€223.00
-
ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories
11/1/2017 - Paper - French - ISO
Learn More€144.00 -
ISO/IEC 17011:2017
Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies
11/1/2017 - Paper - French - ISO
Learn More€144.00 -
ISO 28594:2017
Combined accept-zero sampling systems and process control procedures for product acceptance
General information
10/23/2017 - Paper - French - ISO
Learn More€199.00 -
ISO 28598-1:2017
Acceptance sampling procedures based on the allocation of priorities principle (APP)
Part 1: Guidelines for the APP approach
10/23/2017 - Paper - French - ISO
Learn More€148.00 -
ISO 28590:2017
Sampling procedures for inspection by attributes
Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
10/23/2017 - Paper - English - ISO
Learn More€72.00 -
ISO 28590:2017
Sampling procedures for inspection by attributes
Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
10/23/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 28591:2017
Sequential sampling plans for inspection by attributes
General information
10/23/2017 - Paper - English - ISO
Learn More€199.00 -
ISO 28591:2017
Sequential sampling plans for inspection by attributes
General information
10/23/2017 - Paper - French - ISO
Learn More€199.00 -
ISO 28597:2017
Acceptance sampling procedures by attributes
Specified quality levels in nonconforming items per million
10/23/2017 - Paper - French - ISO
Learn More€148.00 -
ISO 28598-2:2017
Acceptance sampling procedures based on the allocation of priorities principle (APP)
Part 2: Coordinated single sampling plans for acceptance sampling by attributes
10/17/2017 - Paper - French - ISO
Learn More€223.00 -
ISO 10007:2017 (R2023)
Quality management
Guidelines for configuration management
4/7/2017 - Paper - French - ISO
Learn More€72.00 -
ISO 10007:2017 (R2023)
Quality management
Guidelines for configuration management
4/7/2017 - Paper - English - ISO
Learn More€72.00 -
ISO 22514-2:2017
Statistical methods in process management
Capability and performance
2/6/2017 - Paper - English - ISO
Learn More€148.00 -
ISO/TS 9002:2016 (R2023)
Quality management systems
Guidelines for the application of ISO 9001:2015
10/31/2016 - Paper - French - ISO
Learn More€199.00 -
ISO 17034:2016
General requirements for the competence of reference material producers
General information
10/31/2016 - Paper - French - ISO
Learn More€148.00 -
ISO 22514-4:2016 (R2022)
Statistical methods in process management
Capability and performance
8/4/2016 - Paper - English - ISO
Learn More€199.00 -
€148.00
-
€223.00
-
€174.00
-
€199.00
-
ISO 22514-8:2014 (R2020)
Statistical methods in process management
Capability and performance
6/2/2014 - Paper - French - ISO
Learn More€199.00 -
ISO 22514-1:2014 (R2019)
Statistical methods in process management
Capability and performance
6/2/2014 - Paper - English - ISO
Learn More€148.00 -
ISO 22514-1:2014 (R2019)
Statistical methods in process management
Capability and performance
6/2/2014 - Paper - French - ISO
Learn More€148.00 -
€174.00
-
ISO 16269-6:2014
Statistical interpretation of data
Part 6: Determination of statistical tolerance intervals
1/23/2014 - Paper - French - ISO
Learn More€199.00 -
ISO 3951-2:2013 (R2018)
Sampling procedures for inspection by variables
Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
8/27/2013 - Paper - English - ISO
Learn More€248.00 -
ISO 3951-2:2013 (R2018)
Sampling procedures for inspection by variables
Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
8/27/2013 - Paper - French - ISO
Learn More€248.00 -
ISO/TR 13519:2012
Guidance on the development and use of ISO statistical publications supported by software
General information
8/31/2012 - Paper - French - ISO
Learn More€110.00 -
€174.00
-
€199.00
-
ISO/TR 12888:2011 (R2017)
Selected illustrations of gauge repeatability and reproducibility studies
General information
7/21/2011 - Paper - French - ISO
Learn More€199.00 -
ISO 2859-1:1999/Amd 1:2011
Sampling procedures for inspection by attributes
Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
6/17/2011 - Paper - French - ISO
Learn More€21.00 -
ISO/TR 14468:2010 (R2017)
Selected illustrations of attribute agreement analysis
General information
12/7/2010 - Paper - French - ISO
Learn More€199.00 -
ISO 11462-2:2010 (R2016)
Guidelines for implementation of statistical process control (SPC)
Part 2: Catalogue of tools and techniques
9/10/2010 - Paper - French - ISO
Learn More€72.00 -
ISO/TS 28037:2010 (R2014)
Determination and use of straight-line calibration functions
General information
8/30/2010 - Paper - French - ISO
Learn More€223.00 -
ISO/TR 12845:2010 (R2017)
Selected illustrations of fractional factorial screening experiments
General information
7/20/2010 - Paper - French - ISO
Learn More€223.00 -
ISO/IEC 17043:2010 (R2015)
Conformity assessment — General requirements for proficiency testing
2/1/2010 - Paper - French - ISO
Learn More€165.00 -
ISO 11843-2:2000/Cor 1:2007
Capability of detection
Part 2: Methodology in the linear calibration case
10/23/2007 - Paper - French - ISO
Learn More€0.00 -
ISO 28003:2007 (R2016)
Security management systems for the supply chain
Requirements for bodies providing audit and certification of supply chain security management systems
8/2/2007 - Paper - French - ISO
Learn More€199.00 -
ISO 2859-5:2005 (R2019)
Sampling procedures for inspection by attributes
Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
6/27/2005 - Paper - French - ISO
Learn More€199.00 -
ISO 2859-3:2005 (R2019)
Sampling procedures for inspection by attributes
Part 3: Skip-lot sampling procedures
5/27/2005 - Paper - French - ISO
Learn More€174.00 -
ISO/IEC 17050-1:2004 (R2014)
Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements
10/1/2004 - Paper - French - ISO
Learn More€40.00 -
ISO/IEC 17050-2:2004 (R2014)
Conformity assessment — Supplier's declaration of conformity — Part 2: Supporting documentation
10/1/2004 - Paper - French - ISO
Learn More€40.00 -
ISO 16269-8:2004 (R2008)
Statistical interpretation of data
Part 8: Determination of prediction intervals
9/21/2004 - Paper - French - ISO
Learn More€248.00 -
ISO 11843-4:2003 (R2020)
Capability of detection
Part 4: Methodology for comparing the minimum detectable value with a given value
11/4/2003 - Paper - French - ISO
Learn More€72.00 -
ISO 11648-1:2003 (R2019)
Statistical aspects of sampling from bulk materials
Part 1: General principles
3/17/2003 - Paper - French - ISO
Learn More€248.00 -
ISO 11648-2:2001 (R2023)
Statistical aspects of sampling from bulk materials
Part 2: Sampling of particulate materials
11/1/2001 - Paper - French - ISO
Learn More€248.00 -
ISO 11462-1:2001 (R2019)
Guidelines for implementation of statistical process control (SPC)
Part 1: Elements of SPC
6/14/2001 - Paper - French - ISO
Learn More€148.00 -
€72.00
-
ISO 2859-1:1999/Cor 1:2001
Sampling procedures for inspection by attributes
Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
3/15/2001 - Paper - French - ISO
Learn More€0.00 -
ISO 10725:2000 (R2022)
Acceptance sampling plans and procedures for the inspection of bulk materials
General information
12/21/2000 - Paper - French - ISO
Learn More€223.00 -
ISO 11843-2:2000 (R2022)
Capability of detection
Part 2: Methodology in the linear calibration case
4/27/2000 - Paper - French - ISO
Learn More€148.00 -
ISO 2859-1:1999 (R2014)
Sampling procedures for inspection by attributes
Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
11/18/1999 - Paper - French - ISO
Learn More€248.00 -
ISO 11453:1996/Cor 1:1999
Statistical interpretation of data
Tests and confidence intervals relating to proportions
8/26/1999 - Paper - French - ISO
Learn More€0.00 -
ISO 5725-5:1998 (R2018)
Accuracy (trueness and precision) of measurement methods and results
Part 5: Alternative methods for the determination of the precision of a standard measurement method
7/23/1998 - Paper - English - ISO
Learn More€223.00 -
ISO 5725-5:1998 (R2018)
Accuracy (trueness and precision) of measurement methods and results
Part 5: Alternative methods for the determination of the precision of a standard measurement method
7/23/1998 - Paper - French - ISO
Learn More€223.00 -
ISO 5479:1997 (R2021)
Statistical interpretation of data
Tests for departure from the normal distribution
5/22/1997 - Paper - English - ISO
Learn More€174.00 -
ISO 5479:1997 (R2021)
Statistical interpretation of data
Tests for departure from the normal distribution
5/22/1997 - Paper - French - ISO
Learn More€174.00 -
ISO 11453:1996 (R2021)
Statistical interpretation of data
Tests and confidence intervals relating to proportions
4/25/1996 - Paper - French - ISO
Learn More€223.00 -
ISO 11095:1996 (R2020)
Linear calibration using reference materials
General information
2/8/1996 - Paper - English - ISO
Learn More€174.00 -
ISO 11095:1996 (R2020)
Linear calibration using reference materials
General information
2/8/1996 - Paper - French - ISO
Learn More€174.00 -
ISO 5725-6:1994 (R2022)
Accuracy (trueness and precision) of measurement methods and results
Part 6: Use in practice of accuracy values
12/22/1994 - Paper - English - ISO
Learn More€199.00 -
ISO 5725-6:1994 (R2022)
Accuracy (trueness and precision) of measurement methods and results
Part 6: Use in practice of accuracy values
12/22/1994 - Paper - French - ISO
Learn More€199.00 -
ISO 2602:1980 (R2021)
Statistical interpretation of test results
Estimation of the mean
2/1/1980 - Paper - English - ISO
Learn More€48.00 -
ISO 2602:1980 (R2021)
Statistical interpretation of test results
Estimation of the mean
2/1/1980 - Paper - French - ISO
Learn More€48.00 -
ISO 3494:1976 (R2021)
Statistical interpretation of data
Power of tests relating to means and variances
12/1/1976 - Paper - French - ISO
Learn More€199.00 -
ISO 2854:1976 (R2021)
Statistical interpretation of data
Techniques of estimation and tests relating to means and variances
2/1/1976 - Paper - English - ISO
Learn More€199.00 -
ISO 2854:1976 (R2021)
Statistical interpretation of data
Techniques of estimation and tests relating to means and variances
2/1/1976 - Paper - French - ISO
Learn More€199.00 -
ISO 3301:1975 (R2021)
Statistical interpretation of data
Comparison of two means in the case of paired observations
8/1/1975 - Paper - French - ISO
Learn More€48.00
