03.120 : Quality
-
NF ISO 2859-1, X06-022-1 (04/2000)
Sampling procedures for inspection by attributes - Part 1 : sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
4/1/2000 - Paper - French -
Learn More€185.50 -
FD S99-132 (04/2000) (R2010)
Methodology for identification of quality and construction criteria, introduction and monitoring of indicators for health establishments
4/1/2000 - Paper - French -
Learn More€108.33 -
€102.00
-
CSA N286.1-00:2000
Procurement Quality Assurance for Nuclear Power Plants
3/1/2000 - PDF sécurisé - English -
Learn More€102.00 -
ISO 2859-1:1999 (R2014)
Sampling procedures for inspection by attributes
Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
11/18/1999 - Paper - French -
Learn More€248.00 -
BS IEC 61010-3-020:1999
Safety measurements for electrical equipment measurement, control,and laboratory use Conformity verification report IEC 61010-2-020. Particular requirements centrifuges
10/15/1999 - PDF - English -
Learn More€377.00 -
BS IEC 61010-3-061:1999
Safety requirements for electrical equipment measurement, control, and laboratory use Conformity verification report IEC 61010-2-061, particular atomic spectrometers with thermal atomization ionization
10/15/1999 - PDF - English -
Learn More€348.00 -
BS IEC 61010-3-010:1999
Safety requirements for electrical equipment measurement, control, and laboratory use Conformity verification report IEC 61010-2-010, particular the heating of materials
10/15/1999 - PDF - English -
Learn More€348.00 -
BS IEC 61010-3-051:1999
Safety requirements for electrical equipment measurement, control, and laboratory use Conformity verification report IEC 61010-2-051, particular mixing stirring
10/15/1999 - PDF - English -
Learn More€348.00 -
FD X07-021 (10/1999) (R2004)
Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty - Normes fondamentales
10/1/1999 - Paper - French -
Learn More€154.67 -
BS IEC 60300-3-7:1999
Dependability management. Application guide guide. Reliability stress screening of electronic hardware
9/15/1999 - PDF - English -
Learn More€293.00 -
€43.76
-
ISO 11453:1996/Cor 1:1999
Statistical interpretation of data
Tests and confidence intervals relating to proportions
8/26/1999 - Paper - French -
Learn More€0.00 -
UNE 82009-6:1999
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
6/30/1999 - PDF - Spanish -
Learn More€100.00 -
UNE 82009-4:1999
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
6/28/1999 - PDF - Spanish -
Learn More€73.00 -
UNE 82009-2:1999
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.
6/28/1999 - PDF - Spanish -
Learn More€99.00 -
UNE 82009-5:1999
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
6/28/1999 - PDF - Spanish -
Learn More€106.00 -
UNE 82009-3:1999
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
6/28/1999 - PDF - Spanish -
Learn More€79.00 -
€34.00
-
€74.00
-
FD X50-172 (03/1999)
Quality management - Customer satisfaction survey - Management de la qualité
3/1/1999 - Paper - French -
Learn More€119.00 -
€25.00
-
NF ISO 11843-1, X06-048-1 (12/1998)
Capacity of detection - Part 1 : terms and definitions
12/1/1998 - Paper - English, French -
Learn More€78.50 -
€58.00
-
BS 5760-8:1998
Reliability of systems, equipment and components Guide to assessment reliability systems containing software
10/15/1998 - PDF - English -
Learn More€377.00 -
NF ISO 5725-5, X06-041-5 (10/1998)
Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods - Application de la statistique
10/1/1998 - Paper - French -
Learn More€144.50 -
UNE 82009-1:1998
ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 1: GENERAL PRINCIPLES AND DEFINITIONS.
9/28/1998 - PDF - Spanish -
Learn More€74.00 -
FD X50-173 (09/1998) (R2013)
Quality management. Principles, actors and good practices. A guide to self evaluation. - Management de la qualité
9/1/1998 - Paper - French -
Learn More€75.67 -
DIN ISO 5725-1 Berichtigung 1:1998-09
Corrigenda to DIN ISO 5725-1:1997-11 (ISO 5725-1:1994/Cor. 1:1998)
9/1/1998 - PDF - German -
Learn More€0.00 -
FD X50-174 (09/1998) (R2013)
Quality management. Assessment of the quality system effectiveness. - Management de la qualité
9/1/1998 - Paper - French -
Learn More€75.67 -
NF EN 60875-1-1, C93-831-1 (08/1998)
Fibre optic branching devices. Part 1-1 : blank detail specification.
8/1/1998 - Paper - French -
Learn More€85.33 -
ISO 5725-5:1998 (R2018)
Accuracy (trueness and precision) of measurement methods and results
Part 5: Alternative methods for the determination of the precision of a standard measurement method
7/23/1998 - Paper - English -
Learn More€223.00 -
ISO 5725-5:1998 (R2018)
Accuracy (trueness and precision) of measurement methods and results
Part 5: Alternative methods for the determination of the precision of a standard measurement method
7/23/1998 - Paper - French -
Learn More€223.00 -
FD X50-680 (07/1998) (R2008)
Total Quality and Marketing - Management tools - TQM2 - Management par la qualité et la mercatique totales
7/1/1998 - Paper - French -
Learn More€130.67 -
NF X50-777 (05/1998) (R2008)
Private company prevention and security services. Surveillance services by posted agents, mobile agents and alarm-generated intervention services. Specifications of the services and their implementation. - Services des entreprises privées de prévention et de sécurité
5/1/1998 - Paper - French -
Learn More€119.00 -
BS IEC 60300-3-6:1997
Dependability management. Application guide Software aspects of dependability
1/15/1998 - PDF - English -
Learn More€250.00 -
NF X06-023 (12/1997) (R2012)
Application of statistics. Selection of sampling plans for inspection of the percent of non-conforming units by measuring.
12/1/1997 - Paper - French -
Learn More€185.67 -
BS IEC 61010-3:1997
Safety requirements for electrical equipment measurement, control, and laboratory use Protocol the preparation of conformity verification reports IEC 61010 series
11/15/1997 - PDF - English -
Learn More€180.00 -
DIN ISO 5725-1:1997-11
Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
11/1/1997 - PDF - English, German -
Learn More€115.33 -
BS IEC 61650:1997
Reliability data analysis techniques. Procedures for comparison of two constant failure rates and two constant failure (event) intensities
10/15/1997 - PDF - English -
Learn More€180.00 -
BS 2846-7:1997
Guide to statistical interpretation of data Tests for departure from normality
9/15/1997 - PDF - English -
Learn More€293.00 -
€12.00
-
IEC 61650:1997
IEC 61650:1997 Reliability data analysis techniques - Procedures for comparison of two constant failure rates and two constant failure (event) intensities
8/6/1997 - PDF - English, French -
Learn More€132.00 -
€12.00
-
€75.50
-
ISO 5479:1997 (R2021)
Statistical interpretation of data
Tests for departure from the normal distribution
5/22/1997 - Paper - English -
Learn More€174.00 -
ISO 5479:1997 (R2021)
Statistical interpretation of data
Tests for departure from the normal distribution
5/22/1997 - Paper - French -
Learn More€174.00 -
DVS 1177 Beiblatt 1:1997-02
DVS-Lehrgangsreihe - Personal für das betriebliche Qualitätsmanagement - Themenplan
2/1/1997 - PDF - German -
Learn More€13.31 -
DVS 1177 Beiblatt 4:1997-02
DVS-Lehrgangsreihe - Personal für das betriebliche Qualitätsmanagement - Qualitätsmanagementlieferantenbewerter
2/1/1997 - PDF - German -
Learn More€13.31 -
DVS 1177 Beiblatt 2:1997-02
DVS-Lehrgangsreihe - Personal für das betriebliche Qualitätsmanagement - Qualitätsmanagementfachkraft
2/1/1997 - PDF - German -
Learn More€13.31 -
DVS 1177:1997-02
DVS-Lehrgangsreihe - Personal für das betriebliche Qualitätsmanagement
2/1/1997 - PDF - German -
Learn More€13.31 -
DVS 1177 Beiblatt 3:1997-02
DVS-Lehrgangsreihe - Personal für das betriebliche Qualitätsmanagement - Qualitätsmanagementbeauftragter
2/1/1997 - PDF - German -
Learn More€13.31 -
BS ISO/IEC TR 13233:1995
Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
11/15/1996 - PDF - English -
Learn More€348.00 -
JIS Z 9358:1996 (R2003)
Calibration and testing laboratory accreditation systems -- General requirements for operation and recognition
9/20/1996 - PDF - English -
Learn More€34.00 -
NBN ISO 5725-3:1996
Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
9/13/1996 - PDF - French -
Learn More€142.00 -
NBN ISO 5725-3:1996
Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
9/13/1996 - PDF - English -
Learn More€142.00 -
NBN ISO 5725-6:1996
Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
9/13/1996 - PDF - French -
Learn More€142.00 -
NBN ISO 5725-6:1996
Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
9/13/1996 - PDF - English -
Learn More€142.00 -
NF L06-150 (09/1996) (R2011)
Aerospace series. Quality assurance and control. Technical inspection and operators' qualification marks (former definition). - Aéronautique et espace
9/1/1996 - Paper - French -
Learn More€75.67 -
NF L06-160 (09/1996) (R2011)
Aerospace series. Quality management and assurance. Technical inspection and qualified operators marks. - Aéronautique et espace
9/1/1996 - Paper - French -
Learn More€75.67 -
BS 8444-3:1996
Risk management Guide to risk analysis of technological systems
8/15/1996 - PDF - English -
Learn More€250.00 -
BS CECC 00804:1996
Harmonized system of quality assessment for electronic components. Interpretation of 'EN ISO 9000:1994'. Reliability aspects for electronic components
7/15/1996 - PDF - English -
Learn More€250.00 -
ISO 11453:1996 (R2021)
Statistical interpretation of data
Tests and confidence intervals relating to proportions
4/25/1996 - Paper - French -
Learn More€223.00 -
DIN EN 100014:1996-03
Basic specification: CECC assessed process average procedure - 60% confidence limit; German version EN 100014:1991
3/1/1996 - PDF - German -
Learn More€39.35 -
ISO 11095:1996 (R2020)
Linear calibration using reference materials
General information
2/8/1996 - Paper - English -
Learn More€174.00 -
ISO 11095:1996 (R2020)
Linear calibration using reference materials
General information
2/8/1996 - Paper - French -
Learn More€174.00 -
BS CECC 00108:1996
Rule of Procedure 8. Attestation of conformity. The CECC Mark and conditions of use, certificates of approval and procedures for the attestation of conformity
1/15/1996 - PDF - English -
Learn More€348.00 -
ISO/IEC TR 13233:1995
ISO/IEC TR 13233:1995 Information technology -- Interpretation of accreditation requirements in ISO/IEC Guide 25 -- Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services
12/21/1995 - PDF - English -
Learn More€202.00 -
NF X06-031-1 (12/1995) (R2010)
Application of statistics. Control charts. Part 1 : shewhart control charts by variables. - Application de la statistique
12/1/1995 - Paper - French -
Learn More€119.00 -
FD X50-101 (12/1995)
Functional analysis. Functional analysis an interdisciplinary tool for competitiveness. - Analyse fonctionnelle
12/1/1995 - Paper - French -
Learn More€99.33 -
NF X06-031-4 (12/1995) (R2010)
Statistical application. Control charts. Part 4 : cusum control charts. - Application de la statistique
12/1/1995 - Paper - French -
Learn More€99.33 -
NF X06-031-2 (12/1995) (R2010)
Application of statistics - Control charts - Part 2 : control charts by attributes - Application de la statistique
12/1/1995 - Paper - French -
Learn More€99.33 -
NF X06-031-3 (12/1995) (R2010)
Application of statistics. Control charts. Part 3 : control charts by exponentially weighted moving average (ewma). - Application de la statistique
12/1/1995 - Paper - French -
Learn More€99.33 -
UNE 73403:1995 (R2015)
USE OF COMMERCIAL GRADE ITEMS IN SAFETY RELATED APPLICATIONS OF NUCLEAR FACILITIES.
10/24/1995 - PDF - Spanish -
Learn More€49.00 -
UNE 73402:1995 (R2015)
QUALITY ASSURANCE REQUIREMENTS FOR THE DESIGN OF NUCLEAR FACILITIES.
10/24/1995 - PDF - Spanish -
Learn More€57.00 -
NF X06-033 (10/1995) (R2010)
Capability of production and manufacturing processes. General.
10/1/1995 - Paper - French -
Learn More€99.33 -
€68.00
-
BS 5760-10.2:1995
Reliability of systems, equipment and components. Guide to reliability testing Design test cycles
2/15/1995 - PDF - English -
Learn More€250.00 -
ISO 5725-6:1994 (R2022)
Accuracy (trueness and precision) of measurement methods and results
Part 6: Use in practice of accuracy values
12/22/1994 - Paper - English -
Learn More€199.00 -
ISO 5725-6:1994 (R2022)
Accuracy (trueness and precision) of measurement methods and results
Part 6: Use in practice of accuracy values
12/22/1994 - Paper - French -
Learn More€199.00 -
BS CECC 00111-0:1994
Rule of Procedure 11. Specifications An introduction to the types specifications applicable within CECC system
12/15/1994 - PDF - English -
Learn More€180.00 -
NF ISO 5725-6, X06-041-6 (12/1994)
Application of statistics - Accuracy (trueness and precision) of measurement methods and results - Part 6 : use in practice of accuracy values - Application de la statistique
12/1/1994 - Paper - French -
Learn More€130.67 -
BS 5760-2:1994
Reliability of systems, equipment and components Guide to the assessment reliability
10/15/1994 - PDF - English -
Learn More€398.00 -
IEC 60605-2:1994
IEC 60605-2:1994 Equipment reliability testing - Part 2: Design of test cycles
10/12/1994 - PDF - English, French -
Learn More€219.00 -
DD ENV 190000-6:1994
Generic specification: monolithic integrated circuits Procedure for approval and quality management
8/15/1994 - PDF - English -
Learn More€180.00 -
BS EN ISO 9000-1:1994
Quality management and quality assurance standards Guidelines for selection use
7/15/1994 - PDF - English -
Learn More€250.00 -
€65.89
-
BS 5760-12:1993
Reliability of systems, equipment and components Guide to the presentation reliability, maintainability availability predictions
11/15/1993 - PDF - English -
Learn More€180.00 -
PD 6538:1993
Vision 2000. A strategy for international standards' implementation in the quality arena during the 1990s
7/15/1993 - PDF - English -
Learn More€180.00 -
BS 5760-10.3:1993
Reliability of systems, equipment and components. Guide to reliability testing Compliance test procedures for steady-state availability
4/15/1993 - PDF - English -
Learn More€250.00 -
€60.67
-
BS EN 100014:1992
Harmonized system of quality assessment for electronic components. Basic specification: CECC assessed process average procedure (60% confidence limit)
10/1/1992 - PDF - English -
Learn More€180.00 -
CSA Q641-1992
Guide for Quality Assurance Programs for Physical and Chemical Testing Laboratories
2/1/1992 - PDF sécurisé - English -
Learn More€34.00 -
BS CECC 00016:1991
Harmonized system of quality assessment for electronic components. Basic specification: basic requirements for the use of statistical process control (SPC) in the CECC system
12/20/1991 - PDF - English -
Learn More€180.00 -
BS 2846-1:1991
Guide to statistical interpretation of data Routine analysis quantitative
12/20/1991 - PDF - English -
Learn More€293.00 -
IEC 61070:1991
IEC 61070:1991 Compliance test procedures for steady-state availability
11/25/1991 - PDF - English, French -
Learn More€219.00 -
NF X06-021 (10/1991) (R2011)
Application of statistics. Principles of the statistical control of batches. - Application de la statistique
10/1/1991 - Paper - French -
Learn More€108.33 -
EIA-585:1991 (R2002)
Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
6/1/1991 - PDF sécurisé - English -
Learn More€75.60 -
NF X06-068 (12/1990) (R2010)
Application of statistic. Estimation of a proportion. - Application de la statistique
12/1/1990 - Paper - French -
Learn More€86.67 -
NF X06-070 (12/1990) (R2010)
Application of statistic. Comparaison of two proportions. - Application de la statistique
12/1/1990 - Paper - French -
Learn More€99.33 -
NF X06-069 (12/1990) (R2010)
Application of statistics. Comparison of a proportion to a given value. - Application de la statistique
12/1/1990 - Paper - French -
Learn More€99.33 -
€121.00
-
€121.00
-
NF S86-605 (09/1990) (R2010)
Horology. Specification for proof of water. Resistance of watch cases. - Horlogerie
9/1/1990 - Paper - French -
Learn More€48.00 -
NF X06-073-1 (04/1990) (R2010)
Application of statistics. Distribution free tests. Interpretation of order statistics. Part 1 : test of comparison by pairs. - Application de la statistique
4/1/1990 - Paper - French -
Learn More€60.67 -
NF X06-073-2 (04/1990) (R2010)
Application of statistics. Distribution free tests. Interpretation of order statistics. Part 2 : test of comparison of several items. - Application de la statistique
4/1/1990 - Paper - French -
Learn More€99.33 -
X06-080 (11/1989)
Application of statistics. Design of experiments. Vocabulary. - Application de la statistique
11/1/1989 - Paper - French -
Learn More€86.67 -
NF X06-064 (05/1988) (R2013)
Application of statistics. Efficiency of test relating to means and variances. - Application de la statistique
5/1/1988 - Paper - French -
Learn More€130.67 -
€120.00
-
NBN X 50-006:1988
Quality assurance - Requirements for measurement and calibration systems
1/28/1988 - PDF - Dutch -
Learn More€58.00 -
NBN X 50-006:1988
Quality assurance - Requirements for measurement and calibration systems
1/28/1988 - PDF - French -
Learn More€58.00 -
NF X06-051 (12/1987) (R2012)
Application of statistical. Estimation and statistical tests on means and variances. Generalities. - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-056 (12/1987) (R2012)
Application of statistical. Estimation of a mean (unknown variance). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-061 (12/1987) (R2012)
Application of statistical. Comparison of a variance (standard deviation) with a given value. - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€48.00 -
NF X06-054 (12/1987) (R2012)
Application of statistical. Estimation of the difference of two means (known variances). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-059 (12/1987) (R2012)
Application of statistical. Comparison of the difference of two means with a given value (unknown but equal variances). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€48.00 -
NF X06-063 (12/1987) (R2012)
Application of statistical. Comparison of the ratio of two variances (two standard deviations) with a given value. - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€48.00 -
NF X06-052 (12/1987) (R2012)
Application of statistical. Estimation of mean (known variance). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-057 (12/1987) (R2012)
Application of statistical. Comparaison of a mean with a given value (unknown variance). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€48.00 -
NF X06-055 (12/1987) (R2012)
Application of statistical. Comparison of the difference of two means with a given value (know variances). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€48.00 -
NF X06-060 (12/1987) (R2012)
Application of statistical. Estimation of a variance (standard deviation). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-053 (12/1987) (R2012)
Application of statistical. Comparison of a mean with a given value (known variance). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-058 (12/1987) (R2012)
Application of statistical. Estimation of the difference of two means (unknown but equal variances). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-062 (12/1987) (R2012)
Application of statistical. Estimation of the ratio of two variances (two standard deviations). - Applications de la statistique
12/1/1987 - Paper - French -
Learn More€34.67 -
NF X06-026 (06/1987) (R2012)
Application of statistics. Inspection by counting of the proportion of non conforming items or of the average number of non conforming items per units. General methods for the construction of a sampling plan.
6/1/1987 - Paper - French -
Learn More€108.33 -
DIN V 65352:1987-03
Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites
3/1/1987 - PDF - German -
Learn More€92.62 -
DIN V 65352 Beiblatt 1:1987-03
Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation
3/1/1987 - PDF - German -
Learn More€85.79 -
NBN X 03-002:1985
Statistical interpretation of data - Techniques of estimation and tests relating to means and variances
1/1/1985 - PDF - French -
Learn More€121.00 -
NBN X 03-005:1985
Statistical interpretation of data - Comparison of two means in the case of paired observations
1/1/1985 - PDF - French -
Learn More€58.00 -
NBN X 03-001:1985
Statistical interpretation of test results - Estimation ot the mean - Confidence interval
1/1/1985 - PDF - French -
Learn More€58.00 -
NBN X 03-006:1985
Statistical interpretation of data - Power of tests relating to means and variances
1/1/1985 - PDF - French -
Learn More€121.00 -
€108.33
-
€0.00
-
UNE 66060:1982 (R2012)
STATISTICAL INTERPRETATION OF DATA. EFFICIENCY OF TEST RELATING TO MEANS AND VARIANCES
12/15/1982 - PDF - Spanish -
Learn More€86.00 -
€27.00
-
BS 2846-2:1981
Guide to statistical interpretation of data Estimation the mean: confidence interval
1/30/1981 - PDF - English -
Learn More€151.00 -
ISO 2602:1980 (R2021)
Statistical interpretation of test results
Estimation of the mean
2/1/1980 - Paper - French -
Learn More€48.00 -
ISO 2602:1980 (R2021)
Statistical interpretation of test results
Estimation of the mean
2/1/1980 - Paper - English -
Learn More€48.00 -
UNE 66059:1978 IN (R2012)
EXPLANATIONS AND EXAMPLES ABOUT THE USE OF UNE STANDARS 66-045 TO 66-056
12/15/1978 - PDF - Spanish -
Learn More€58.00 -
UNE 66051:1978 (R2012)
ESTIMATION OF THE DIFFERENCE OF TWO MEANS (VARIANCES UNKNOWN, BUT MAY BE ASSUMED EQUAL)
3/15/1978 - PDF - Spanish -
Learn More€17.00 -
€17.00
-
UNE 66052:1978 (R2012)
COMPARISON OF THE MEANS OF TWO LOTS (VARIANCES UNKNOWN, BUT MAY BE ASSUMED EQUAL)
3/15/1978 - PDF - Spanish -
Learn More€17.00 -
€17.00
-
UNE 66050:1978 (R2012)
COMPARISON OF THE MEAN OF A LOT WITH A GIVEN VALUE (VARIANCE UNKNOWN)
3/15/1978 - PDF - Spanish -
Learn More€17.00 -
UNE 66046:1978 (R2012)
COMPARISON OF THE MEAN OF A LOT WITH A GIVEN VALUE (KNOW VARIANCE)
2/15/1978 - PDF - Spanish -
Learn More€17.00 -
UNE 66054:1978 (R2012)
COMPARISON OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT WITH A GIVEN VALUE
2/15/1978 - PDF - Spanish -
Learn More€17.00 -
UNE 66047:1978 (R2012)
ESTIMATION OF THE DIFFERENCE IN THE MEANS OF TWO LOTS (KNOW VARIANCES)
2/15/1978 - PDF - Spanish -
Learn More€17.00 -
UNE 66056:1978 (R2012)
ESTIMATION OF THE RATIO OF TWO VARIANCES OR OF TWO STANDARD DEVIATIONS
2/15/1978 - PDF - Spanish -
Learn More€17.00 -
€17.00
-
UNE 66053:1978 (R2012)
ESTIMATION OF THE VARIANCE OR OF THE STANDARD DEVIATION OF A LOT
2/15/1978 - PDF - Spanish -
Learn More€17.00 -
€27.00
-
BS 2846-5:1977
Guide to statistical interpretation of data Power tests relating means and variances
7/29/1977 - PDF - English -
Learn More€293.00 -
ISO 3494:1976 (R2021)
Statistical interpretation of data
Power of tests relating to means and variances
12/1/1976 - Paper - French -
Learn More€199.00 -
BS 2846-4:1976
Guide to statistical interpretation of data Techniques estimation and tests relating means variances
8/31/1976 - PDF - English -
Learn More€348.00 -
BS 2846-6:1976
Guide to statistical interpretation of data Comparison two means in the case paired observations
6/30/1976 - PDF - English -
Learn More€151.00 -
ISO 2854:1976 (R2021)
Statistical interpretation of data
Techniques of estimation and tests relating to means and variances
2/1/1976 - Paper - French -
Learn More€199.00 -
ISO 2854:1976 (R2021)
Statistical interpretation of data
Techniques of estimation and tests relating to means and variances
2/1/1976 - Paper - English -
Learn More€199.00 -
ISO 3301:1975 (R2021)
Statistical interpretation of data
Comparison of two means in the case of paired observations
8/1/1975 - Paper - French -
Learn More€48.00 -
UNE 66006:1974 IN (R2016)
HANDBOOK FOR QUALITY CONTROL DURING THE MANUFACTURE BASED ON THE SYSTEM OF THE CONTROL GRAPHIC.
11/15/1974 - PDF - Spanish -
Learn More€91.00 -
NF X06-032 (05/1973) (R2013)
Statistics and quality. Statistical processing or data. Determination of a statistical tolerance interval.
5/1/1973 - Paper - French -
Learn More€75.67 -
EIA RS-270:1973 (R1979)
Tools, Crimping, Solderless Wiring Devices - Recommended Procedures for User Certification
1/8/1973 - PDF sécurisé - English -
Learn More€75.60 -
€88.33
-
ASTM STP91A:1963
A Guide for Fatigue Testing and the Statistical Analysis of Fatigue Data
1/1/1963 - PDF - English -
Learn More€52.25 -
€250.00
-
€52.25
-
Core Tools 6 Book Bundle - english
Set includes the latest editions of the Core Tool manuals: APQP, CP, PPAP, MSA, SPC & AIAG/VDA FMEA
The Automotive Quality Core Tools are the building blocks of an effective quality management system. This bundled cost saving set includes 6 manuals:
⦁ AIAG Product Part Approval Process (PPAP)
⦁ AIAG Advanced Product Quality Planning (APQP) *** New ***
⦁ AIAG Control Plan (CP) *** New ***
⦁ AIAG Statistical Process Control (SPC)
⦁ AIAG Measurement System Analysis (MSA)
⦁ AIAG/VDA FMEA Handbook
4/24/2024 - Paper - English -
Learn More€585.00 -
UNE-EN 9104-1:2023
Aerospace series - Quality management systems - Part 1: Requirements for Certification of Aviation, Space, and Defense (Endorsed by Asociación Española de Normalización in January of 2024.)
4/24/2024 - PDF - English -
Learn More€88.00 -
€44.00
-
€44.00
-
UNE-EN 17799:2023
Personal data protection requirements for processing operations (Endorsed by Asociación Española de Normalización in December of 2023.)
4/24/2024 - PDF - English -
Learn More€69.00 -
UNE-EN ISO/IEC 27006-1:2024
Information security, cybersecurity and privacy protection - Requirements for bodies providing audit and certification of information security management systems - Part 1: General (ISO/IEC 27006-1:2024) (Endorsed by Asociación Española de Normalización in April of 2024.)
4/24/2024 - PDF - English -
Learn More€88.00 -
€49.00
-
UNE-EN 9104-3:2023
Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication (Endorsed by Asociación Española de Normalización in January of 2024.)
4/24/2024 - PDF - English -
Learn More€71.00 -
UNE-EN IEC 62506:2023
Methods for product accelerated testing (Endorsed by Asociación Española de Normalización in January of 2024.)
4/24/2024 - PDF - English -
Learn More€131.00 -
UNE-EN 9163:2023
Aerospace series - Certificate of conformity requirements (Endorsed by Asociación Española de Normalización in January of 2024.)
4/24/2024 - PDF - English -
Learn More€58.00 -
€44.00
-
Core Tools 7 Book Bundle - english
Set includes the latest editions of the Core Tool manuals: APQP, CP, PPAP, FMEA, MSA, SPC & AIAG/VDA FMEA
The Automotive Quality Core Tools are the building blocks of an effective quality management system. This bundled cost saving set includes 7 manuals:
⦁ AIAG Product Part Approval Process (PPAP)
⦁ AIAG Advanced Product Quality Planning (APQP) *** New ***
⦁ AIAG Control Plan (CP) *** New ***
⦁ AIAG Statistical Process Control (SPC)
⦁ AIAG Measurement System Analysis (MSA)
⦁ AIAG Potential Failure Mode and Effects Analysis (FMEA)
⦁ AIAG/VDA FMEA Handbook
4/24/2024 - Paper - English -
Learn More€689.00