21.120 : Shafts and couplings
-
PR NF E22-621, E22-621PR (01/2024)
Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
1/1/2024 - Paper - French - AFNOR
Learn More€88.50 -
DIN ISO 21940-21:2023-10
Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2022), Text in German and English
10/1/2023 - PDF - English, German - DIN
Learn More€163.74 -
DIN 32711-1:2023-09
Shaft-hub-connection - Polygon profile P3G - Part 1: Generalities and geometry
9/1/2023 - PDF - German - DIN
Learn More€52.90 -
DIN 32711-2:2023-09
Shaft-hub-connection - Polygon profile P3G - Part 2: Calculation and dimensioning
9/1/2023 - PDF - German - DIN
Learn More€45.98 -
DIN 743 Beiblatt 1:2023-09
Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
9/1/2023 - PDF - German - DIN
Learn More€79.72 -
DIN 743-3:2023-09
Calculation of load capacity of shafts and axles - Part 3: Strength of materials
9/1/2023 - PDF - German - DIN
Learn More€45.98 -
NBN ISO 21940-21:2023
Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines ISO 21940-21:2022
4/12/2023 - PDF - English - NBN
Learn More€184.00 -
DIN ISO 21940-11:2023-04
Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016 + Amd 1:2022)
4/1/2023 - PDF - German - DIN
Learn More€110.00 -
DIN ISO 21940-14:2023-04
Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012 + Amd 1:2022)
4/1/2023 - PDF - German - DIN
Learn More€85.79 -
NBN ISO 21940-11:2016/A1:2023
Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour — Amendment 1 ISO 21940-11:2016/Amd 1:2022
2/6/2023 - PDF - English - NBN
Learn More€20.00 -
BS ISO 21940-21:2022 + Redline
Tracked Changes. Mechanical vibration. Rotor balancing Description and evaluation of machines
1/20/2023 - PDF - English - BSI
Learn More€492.00 -
NF ISO 20816-3, E90-780-3 (01/2023)
Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 3 : Machines industrielles avec une puissance nominale supérieure à 15 kW et une vitesse de fonctionnement comprise entre 120 r/min et 30 000 r/min
1/1/2023 - Paper - French - AFNOR
Learn More€86.67 -
BS ISO 21940-21:2022
Mechanical vibration. Rotor balancing Description and evaluation of machines
11/30/2022 - PDF - English - BSI
Learn More€377.00 -
NF E22-057-4 (11/2022)
Transmissions mécaniques - Calcul de la capacité des arbres et axes - Partie 4 : Cumul de dommage, fatigue oligocyclique, endurance limitée et endurance
11/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
NF E22-057-1 (11/2022)
Transmissions mécaniques - Calcul de la capacité des arbres et axes - Partie 1 : Généralités
11/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
NF E22-621 (10/2022)
Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
10/1/2022 - Paper - French - AFNOR
Learn More€119.00 -
BS ISO 21940-14:2012+A1:2022
Mechanical vibration. Rotor balancing Procedures for assessing balance errors
8/3/2022 - PDF - English - BSI
Learn More€250.00 -
BS ISO 21940-11:2016+A1:2022
Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with rigid behaviour
6/24/2022 - PDF - English - BSI
Learn More€293.00 -
DIN 6888:2022-03
Drive type fastenings without taper action - Woodruff keys - Dimensions and application
3/1/2022 - PDF - German - DIN
Learn More€52.90 -
PR NF EN 13001-3-8, E52-013-3-8PR (02/2022)
Appareils de levage à charge suspendue - Conception générale - Partie 3-8 : états limites et vérification d'aptitude des éléments de mécanismes - Arbres
2/1/2022 - Paper - English, French - AFNOR
Learn More€153.50 -
DIN EN 13001-3-8:2022-02
Cranes - General design - Part 3-8: Limit states and proof competence of machinery – Shafts, German and English version prEN 13001-3-8:2021
2/1/2022 - PDF - English, German - DIN
Learn More€163.74 -
21/30437147 DC:2021
BS EN 13001-3-8. Cranes. General design. Limit states and proof competence of machinery Part 3-8. Shafts
12/16/2021 - PDF - English - BSI
Learn More€24.00 -
DIN 3689-1:2021-11
Shaft to collar connection - Hypotrochoidal H-profiles - Part 1: Geometry and dimensions
11/1/2021 - PDF - German - DIN
Learn More€120.84 -
DIN 6885-1:2021-11
Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1: Dimensions, tolerances, mass
11/1/2021 - PDF - German - DIN
Learn More€72.80 -
NF ISO 4156-1, E22-144-1 (10/2021)
Straight cylindrical involute splines - Metric module, side fit - Part 1 : Generalities
10/1/2021 - Paper - French - AFNOR
Learn More€144.67 -
NF ISO 4156-2, E22-144-2 (10/2021)
Straight cylindrical involute splines - Metric module, side fit - Part 2 : Dimensions
10/1/2021 - Paper - French - AFNOR
Learn More€302.50 -
NF ISO 4156-3, E22-144-3 (10/2021)
Straight cylindrical involute splines - Metric module, side fit - Part 3 : Inspection
10/1/2021 - Paper - French - AFNOR
Learn More€119.00 -
UNE-EN IEC 60372:2021
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
7/28/2021 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN IEC 60372:2021
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
7/28/2021 - PDF - English - AENOR
Learn More€88.80 -
NBN ISO 21940-1:2021
Mechanical vibration — Rotor balancing — Part 1: Introduction ISO 21940-1:2019
6/8/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 21940-11:2021
Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour ISO 21940-11:2016
6/8/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 21940-12:2021
Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour ISO 21940-12:2016
6/8/2021 - PDF - English - NBN
Learn More€142.00 -
NBN ISO 21940-2:2021
Mechanical vibration — Rotor balancing — Part 2: Vocabulary ISO 21940-2:2017
6/8/2021 - PDF - English - NBN
Learn More€37.00 -
€72.80
-
DIN 6885-2:2021-06
Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass
6/1/2021 - PDF - German - DIN
Learn More€65.89 -
DIN 6885-3:2021-06
Drive type fastenings without taper action, parallel keys, keyways - Low pattern - Part 3: Dimensions, tolerances, mass
6/1/2021 - PDF - German - DIN
Learn More€59.63 -
DIN ISO 16084:2021-06
Balancing of rotating tools and tool systems (ISO 16084:2017)
6/1/2021 - PDF - German - DIN
Learn More€163.74 -
BS ISO 4156-2:2021
Straight cylindrical involute splines. Metric module, side fit Dimensions
2/9/2021 - PDF - English - BSI
Learn More€449.00 -
BS ISO 4156-1:2021 + Redline
Tracked Changes. Straight cylindrical involute splines. Metric module, side fit Generalities
2/9/2021 - PDF - English - BSI
Learn More€492.00 -
BS ISO 4156-1:2021
Straight cylindrical involute splines. Metric module, side fit Generalities
2/3/2021 - PDF - English - BSI
Learn More€377.00 -
BS ISO 4156-3:2021
Straight cylindrical involute splines. Metric module, side fit Inspection
2/3/2021 - PDF - English - BSI
Learn More€348.00 -
DIN ISO 21940-21 Beiblatt 1:2020-11
Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines, Supplement 1: Statistical quality capability parameters for assessment of the unbalance measuring process
11/1/2020 - PDF - German - DIN
Learn More€92.62 -
BS ISO 21940-12:2016 + Redline
Tracked Changes. Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with flexible behaviour
2/25/2020 - PDF - English - BSI
Learn More€432.00 -
BS ISO 21940-2:2017 + Redline
Tracked Changes. Mechanical vibration. Rotor balancing Vocabulary
2/25/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 6413:2018 + Redline
Tracked Changes. Technical product documentation. Representation of splines and serrations
2/24/2020 - PDF - English - BSI
Learn More€235.00 -
BS ISO 21940-1:2019 + Redline
Tracked Changes. Mechanical vibration. Rotor balancing Introduction
2/24/2020 - PDF - English - BSI
Learn More€382.00 -
DIN ISO 21940-1:2019-07
Mechanical vibration - Rotor balancing - Part 1: Introduction (ISO 21940-1:2019)
7/1/2019 - PDF - German - DIN
Learn More€104.95 -
SAE AS 7413A:2019-04-23
Coupling Assemblies, Quick Disconnect, Automatic Shutoff (Stabilized: Apr 2019)
4/23/2019 - PDF - English - SAE
Learn More€101.00 -
€125.98
-
€131.40
-
€104.95
-
€0.00
-
€293.00
-
€174.00
-
DIN EN ISO 6413:2018-12
Technical product documentation - Representation of splines and serrations (ISO 6413:2018), German version EN ISO 6413:2018
12/1/2018 - PDF - German - DIN
Learn More€72.80 -
UNE-EN ISO 6413:2018
Technical product documentation - Representation of splines and serrations (ISO 6413:2018) (Endorsed by Asociación Española de Normalización in December of 2018.)
12/1/2018 - PDF - English - AENOR
Learn More€66.00 -
NBN EN ISO 6413:2018
Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
11/27/2018 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 6413:2018
Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
11/27/2018 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 6413:2018
Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
11/27/2018 - PDF - English - NBN
Learn More€58.00 -
BS EN ISO 6413:2018
Technical product documentation. Representation of splines and serrations
10/30/2018 - PDF - English - BSI
Learn More€180.00 -
NF EN ISO 6413, E04-119 (10/2018)
Technical product documentation - Representation of splines and serrations - Dessins techniques - Représentation des cannelures et des dentelures
10/1/2018 - Paper - French - AFNOR
Learn More€60.67 -
18/30360270 DC:2018
BS EN 13001-3-8. Cranes. General design Part 3-8. Limit states and proof competence of machinery. Shafts
6/1/2018 - PDF - English - BSI
Learn More€24.00 -
IEC 60744:2018
IEC 60744:2018 Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods
5/14/2018 - PDF - English, French - IEC
Learn More€270.00 -
€135.26
-
€377.00
-
ISO 16084:2017 (R2023)
Balancing of rotating tools and tool systems
General information
10/25/2017 - Paper - French - ISO
Learn More€223.00 -
ISO 16084:2017 (R2023)
Balancing of rotating tools and tool systems
General information
10/25/2017 - Paper - English - ISO
Learn More€223.00 -
DIN ISO 21940-2:2017-09
Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017)
9/1/2017 - PDF - English - DIN
Learn More€124.21 -
DIN ISO 21940-2:2017-09
Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017)
9/1/2017 - PDF - German - DIN
Learn More€99.35 -
€250.00
-
€66.07
-
€52.90
-
SAE ARP 4050A:2022-04-14
Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
2/7/2017 - PDF - English - SAE
Learn More€116.00 -
DIN 7190-1:2017-02
Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
2/1/2017 - PDF - English - DIN
Learn More€144.02 -
DIN 7190-1:2017-02
Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
2/1/2017 - PDF - German - DIN
Learn More€115.33 -
DIN 7190-2:2017-02
Interference fits - Part 2: Calculation and design rules for conical self-locking pressfits
2/1/2017 - PDF - German - DIN
Learn More€99.35 -
16/30256643 DC:2016
BS EN 60744. Nuclear power plants. Instrumentation and control systems important to safety. Safety logic assemblies used in systems performing category A functions. Characteristics and test methods
11/22/2016 - PDF - English - BSI
Learn More€24.00 -
€174.00
-
DIN ISO 21940-12:2016-09
Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
9/1/2016 - PDF - German - DIN
Learn More€115.33 -
DIN ISO 21940-12:2016-09
Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
9/1/2016 - PDF - English - DIN
Learn More€144.02 -
€109.00
-
€138.00
-
BS ISO 21940-12:2016
Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with flexible behaviour
4/30/2016 - PDF - English - BSI
Learn More€331.00 -
€174.00
-
DIN ISO 21940-12 Beiblatt 1:2015-04
Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour - Supplement 1: Procedure for balancing at multiple rotational speeds
4/1/2015 - PDF - German - DIN
Learn More€201.96 -
DIN 5480-2:2015-03
Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
3/1/2015 - PDF - German - DIN
Learn More€115.33 -
DIN 5480-2:2015-03
Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
3/1/2015 - PDF - English - DIN
Learn More€144.02 -
ASTM A503/A503M-15(2020)
Standard Specification for Ultrasonic Examination of Forged Crankshafts
1/1/2015 - PDF - English - ASTM
Learn More€48.00 -
ASTM A503/A503M-15(2020) + Redline
Standard Specification for Ultrasonic Examination of Forged Crankshafts
1/1/2015 - PDF - English - ASTM
Learn More€57.00 -
DIN 743-3 Berichtigung 1:2014-12
Calculation of load capacity of shafts and axles - Part 3: Strength of materials, Corrigendum to DIN 743-3:2012-12
12/1/2014 - PDF - German - DIN
Learn More€0.00 -
DIN 743-3 Berichtigung 1:2014-12
Calculation of load capacity of shafts and axles - Part 3: Strength of materials, Corrigendum to DIN 743-3:2012-12
12/1/2014 - PDF - English - DIN
Learn More€0.00 -
SAE J 499:2014-06-05
Parallel Side Splines for Soft Broached Holes in Fittings (Stabilized: Jun 2014)
6/5/2014 - PDF - English - SAE
Learn More€60.00 -
€70.00
-
DIN 6892 Berichtigung 1:2014-05
Drive type fastenings without taper action - Parallel keys - Calculation and design, Corrigendum to DIN 6892:2012-08
5/1/2014 - PDF - German - DIN
Learn More€0.00 -
DIN ISO 21940-21:2013-09
Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
9/1/2013 - PDF - German - DIN
Learn More€131.96 -
DIN ISO 21940-21:2013-09
Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
9/1/2013 - PDF - English - DIN
Learn More€164.95 -
BS ISO 21940-31:2013
Mechanical vibration. Rotor balancing Susceptibility and sensitivity of machines to unbalance
8/31/2013 - PDF - English - BSI
Learn More€250.00 -
€148.00
-
FD E22-057-3 (03/2013)
Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 3 : examples - Transmissions mécaniques
3/1/2013 - Paper - French - AFNOR
Learn More€75.67 -
SAE ARP 587C:2012-12-17
Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors (Stabilized: Dec 2012)
12/17/2012 - PDF - English - SAE
Learn More€132.00 -
DIN 743-1:2012-12
Calculation of load capacity of shafts and axles - Part 1: General
12/1/2012 - PDF - German - DIN
Learn More€85.79 -
DIN 743-1:2012-12
Calculation of load capacity of shafts and axles - Part 1: General
12/1/2012 - PDF - English - DIN
Learn More€107.48 -
DIN 743-2:2012-12
Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors
12/1/2012 - PDF - German - DIN
Learn More€99.35 -
DIN 743-2:2012-12
Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors
12/1/2012 - PDF - English - DIN
Learn More€124.21 -
DIN 743-3:2012-12
Calculation of load capacity of shafts and axles - Part 3: Strength of materials
12/1/2012 - PDF - German - DIN
Learn More€39.35 -
DIN 743-3:2012-12
Calculation of load capacity of shafts and axles - Part 3: Strength of materials
12/1/2012 - PDF - English - DIN
Learn More€49.16 -
DIN 743-4:2012-12
Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
12/1/2012 - PDF - German - DIN
Learn More€52.90 -
DIN 743-4:2012-12
Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
12/1/2012 - PDF - English - DIN
Learn More€66.07 -
DIN 743 Beiblatt 1:2012-12
Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
12/1/2012 - PDF - German - DIN
Learn More€72.80 -
DIN 743 Beiblatt 1:2012-12
Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
12/1/2012 - PDF - English - DIN
Learn More€91.12 -
DIN 743 Beiblatt 2:2012-12
Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4
12/1/2012 - PDF - German - DIN
Learn More€45.98 -
DIN 743 Beiblatt 2:2012-12
Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4
12/1/2012 - PDF - English - DIN
Learn More€57.57 -
DIN ISO 21940-23:2012-09
Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
9/1/2012 - PDF - German - DIN
Learn More€92.62 -
DIN ISO 21940-23:2012-09
Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
9/1/2012 - PDF - English - DIN
Learn More€115.98 -
DIN 6892:2012-08
Drive type fastenings without taper action - Parallel keys - Calculation and design
8/1/2012 - PDF - German - DIN
Learn More€115.33 -
DIN ISO 21940-13:2012-08
Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
8/1/2012 - PDF - English - DIN
Learn More€115.98 -
DIN ISO 21940-32:2012-08
Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
8/1/2012 - PDF - German - DIN
Learn More€79.72 -
DIN ISO 21940-32:2012-08
Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
8/1/2012 - PDF - English - DIN
Learn More€99.44 -
DIN ISO 21940-13:2012-08
Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
8/1/2012 - PDF - German - DIN
Learn More€92.62 -
BS ISO 21940-23:2012
Mechanical vibration. Rotor balancing Enclosures and other protective measures for the measuring station of machines
6/30/2012 - PDF - English - BSI
Learn More€293.00 -
€110.00
-
€148.00
-
BS ISO 21940-32:2012
Mechanical vibration. Rotor balancing Shaft and fitment key convention
4/30/2012 - PDF - English - BSI
Learn More€250.00 -
BS ISO 21940-13:2012
Mechanical vibration. Rotor balancing Criteria and safeguards for the insitu of medium large rotors
4/30/2012 - PDF - English - BSI
Learn More€293.00 -
€110.00
-
€148.00
-
€110.00
-
DIN 32712-2:2012-03
Shaft to collar connection - Polygon profile P4C - Part 2: Calculation and dimensioning
3/1/2012 - PDF - German - DIN
Learn More€39.35 -
NF E22-057-2 (03/2012)
Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 2 : influence factors - Transmissions mécaniques
3/1/2012 - Paper - French - AFNOR
Learn More€75.67 -
SAE ARP 4048:2020-05-13
BALANCING MACHINES - DESCRIPTION AND EVALUATION HORIZONTAL, TWO-PLANE, HARD-BEARING TYPE FOR GAS TURBINE ROTORS
7/19/2011 - PDF - English - SAE
Learn More€114.00 -
€79.72
-
€99.44
-
NF ISO 14694/A1, E51-004/A1 (03/2011)
Industrial fans - Specifications for balance quality and vibration levels - Amendment 1 - Ventilateurs industriels
3/1/2011 - Paper - French - AFNOR
Learn More€25.50 -
ISO 14694:2003/Amd 1:2010
Industrial fans
Specifications for balance quality and vibration levels
10/28/2010 - Paper - English - ISO
Learn More€21.00 -
ISO 14694:2003/Amd 1:2010
Industrial fans
Specifications for balance quality and vibration levels
10/28/2010 - Paper - French - ISO
Learn More€21.00 -
€78.00
-
€45.98
-
€57.57
-
€0.00
-
€40.00
-
DIN EN ISO 14691:2009-05
Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691:2008), English version EN ISO 14691:2008
5/1/2009 - PDF - English - DIN
Learn More€104.95 -
JIS B 0904/AMENDMENT 1:2009 (R2013)
Conical shaft ends for cone taper ratio 1:10 (Amendment 1)
3/20/2009 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
DIN 32712-1:2009-03
Shaft to collar connection - Polygon profile P4C - Part 1: Generalities and geometry
3/1/2009 - PDF - German - DIN
Learn More€45.98 -
€25.00
-
DIN 5480-16 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 16: Tools, Corrigendum to DIN 5480-16:2006-03
1/1/2009 - PDF - German - DIN
Learn More€0.00 -
DIN 5480-16 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 16: Tools, Corrigendum 1 to English version of DIN 5480-16:2006-03
1/1/2009 - PDF - English - DIN
Learn More€0.00 -
DIN 5480-15 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 15: Inspection, Corrigendum to DIN 5480-15:2006-03
1/1/2009 - PDF - German - DIN
Learn More€0.00 -
DIN 5480-15 Berichtigung 1:2009-01
Involute splines based on reference diameters - Part 15: Inspection, Corrigendum 1 to English version of DIN 5480-15:2006-03
1/1/2009 - PDF - English - DIN
Learn More€0.00 -
€124.00
-
€50.18
-
€104.95
-
DIN 5480-1:2006-03
Involute splines based on reference diameters - Part 1: Generalities
3/1/2006 - PDF - German - DIN
Learn More€72.80 -
DIN 5480-1:2006-03
Involute splines based on reference diameters - Part 1: Generalities
3/1/2006 - PDF - English - DIN
Learn More€91.12 -
DIN 5480-15:2006-03
Involute splines based on reference diameters - Part 15: Inspection
3/1/2006 - PDF - German - DIN
Learn More€92.62 -
DIN 5480-15:2006-03
Involute splines based on reference diameters - Part 15: Inspection
3/1/2006 - PDF - English - DIN
Learn More€115.98 -
DIN 5480-16:2006-03
Involute splines based on reference diameters - Part 16: Tools
3/1/2006 - PDF - German - DIN
Learn More€79.72 -
DIN 5480-16:2006-03
Involute splines based on reference diameters - Part 16: Tools
3/1/2006 - PDF - English - DIN
Learn More€99.44 -
VDI 2722:2003-08 (R2014)
Cardan shafts and cardan shaft lines - Homokinematic mechanisms
8/1/2003 - PDF - English, German - VDI
Learn More€128.38 -
ISO 14694:2003 (R2019)
Industrial fans
Specifications for balance quality and vibration levels
4/14/2003 - Paper - French - ISO
Learn More€199.00 -
ISO 14694:2003 (R2019)
Industrial fans
Specifications for balance quality and vibration levels
4/14/2003 - Paper - English - ISO
Learn More€199.00 -
€25.00
-
€25.00
-
DIN 5466-1:2000-10
Splined joints, calculation of load capacity - Part 1: General basis
10/1/2000 - PDF - German - DIN
Learn More€79.72 -
DIN ISO 10817-1:1999-11
Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
11/1/1999 - PDF - German - DIN
Learn More€72.80 -
BS ISO 10817-1:1999
Rotating shaft vibration measuring systems Relative and absolute sensing of radial
6/15/1999 - PDF - English - BSI
Learn More€250.00 -
€59.63
-
€74.58
-
€25.00
-
JIS B 1601:1996 (R2015)
Straight-sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification
1/1/1996 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
JIS B 1603:1995 (R2015)
Straight cylindrical involute splines - side fit - Generalities, dimensions and inspection
3/1/1995 - PDF - Japanese - JSA
Learn More€132.34 -
€25.00
-
JIS B 0006:1993 (R2013)
Technical drawings - Representation of splines and serrations
5/1/1993 - PDF - Japanese - JSA
Learn More€25.00 -
BS 6186-1:Addendum No. 1:1993
Specification for straight cylindrical involute splines: metric module, side fit Inspection
3/15/1993 - PDF - English - BSI
Learn More€449.00 -
JIS B 0905:1992 (R2016)
Rotating machines - Balance quality requirements of rigid rotors
7/1/1992 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
€25.00
-
NF E22-179 (12/1991) (R2011)
Mechanical transmissions. Woodruff keys. Dimensions and tolerances. - Transmissions mécaniques
12/1/1991 - Paper - French - AFNOR
Learn More€60.50 -
NF E22-182 (12/1991) (R2011)
Mechanical transmissions. Tangential keys and keyways. Dimensions and tolerances. - Transmissions mécaniques
12/1/1991 - Paper - French - AFNOR
Learn More€60.67 -
E22-181 (12/1991) (R2011)
Mechanical transmissions. Parallel keys fastened by screws. Dimensions. - Transmissions mécaniques
12/1/1991 - Paper - French - AFNOR
Learn More€48.00 -
€25.00
-
NF R94-302 (09/1989) (R2014)
Road vehicles. Fillets, chamfers and backing off. - Véhicules routiers
9/1/1989 - Paper - French - AFNOR
Learn More€48.00 -
NF E22-622 (12/1988)
Mechanical transmissions. Pressed-on assemblies on conical bearings. Function, realization, calculation. - Transmissions mécaniques
12/1/1988 - Paper - French - AFNOR
Learn More€60.67 -
NF E22-625 (12/1988)
Mechanical transmissions. Concentric assemblies on cylindrical carried with intermediate bush with conical external surface. Calculation. - Transmissions mécaniques
12/1/1988 - Paper - French - AFNOR
Learn More€48.00 -
€25.00
-
€25.00
-
€25.00
-
NF L05-026 (05/1988) (R2008)
Aerospace industry. ISO M and mj threads. Undercut relief and lead-in chamfers. - Industrie aérospatiale
5/1/1988 - Paper - French - AFNOR
Learn More€48.00 -
NF E22-175 (11/1987) (R2012)
Keying. Assembly by means of parrallel keys. Dimensions.
11/1/1987 - Paper - French - AFNOR
Learn More€48.00 -
NF E22-176 (11/1987) (R2012)
Keying. Forced assembly by means of taper keys. Dimensions.
11/1/1987 - Paper - French - AFNOR
Learn More€48.00 -
€34.67
-
€34.67
-
€32.50
-
DIN 28135:1987-05
Axial thrust washers for flange couplings of vertical shaft for agitators
5/1/1987 - PDF - German - DIN
Learn More€39.35 -
NF E22-610 (12/1986) (R2011)
Mechanical transmissions. Coupling devices. Classification. Terminology. Graphical symbols.
12/1/1986 - Paper - French - AFNOR
Learn More€48.00 -
DIN ISO 14:1986-12
Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982
12/1/1986 - PDF - German - DIN
Learn More€72.80 -
BS 5686:1986
Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
8/29/1986 - PDF - English - BSI
Learn More€180.00 -
DIN 740-1:1986-08
Power transmission engineering; flexible shaft couplings; technical delivery conditions
8/1/1986 - PDF - German - DIN
Learn More€72.80 -
DIN 740-1:1986-08
Power transmission engineering; flexible shaft couplings; technical delivery conditions
8/1/1986 - PDF - English - DIN
Learn More€91.12