23.040.45 : Plastics fittings
-
BS EN 12201-3:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
4/10/2024 - PDF - English - BSI
Learn More€432.00 -
BS ISO 10928:2024 + Redline
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
4/3/2024 - PDF - English - BSI
Learn More€326.00 -
DIN EN 16903:2024-04
Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16903:2024
4/1/2024 - PDF - English, German - DIN
Learn More€104.95 -
DIN EN 16904:2024-04
Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16904:2024
4/1/2024 - PDF - English, German - DIN
Learn More€99.35 -
ASTM F437-24
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English - ASTM
Learn More€60.00 -
ASTM F437-24 + Redline
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English - ASTM
Learn More€71.00 -
ASTM F439-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English - ASTM
Learn More€60.00 -
ASTM F439-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English - ASTM
Learn More€71.00 -
ASTM F2618-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
4/1/2024 - PDF - English - ASTM
Learn More€60.00 -
ASTM F2618-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
4/1/2024 - PDF - English - ASTM
Learn More€71.00 -
24/30484766 DC:2024
BS EN 16903 Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
3/28/2024 - PDF - English - BSI
Learn More€24.00 -
24/30488704 DC:2024
BS EN 16904 Plastics piping systems inside the building structure - Environmental product declarations. Product category rules complementary to EN 15804
3/28/2024 - PDF - English - BSI
Learn More€24.00 -
BS ISO 10928:2024
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
3/22/2024 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - Spanish - AENOR
Learn More€88.00 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - English - AENOR
Learn More€105.60 -
BS EN 12201-3:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
3/14/2024 - PDF - English - BSI
Learn More€331.00 -
BS EN ISO 7510:2024
Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
2/22/2024 - PDF - English - BSI
Learn More€151.00 -
24/30434673 DC:2024
BS ISO 18553 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
2/12/2024 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 7510:2024
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
2/7/2024 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 7510:2024
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
2/7/2024 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 7510:2024
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
2/7/2024 - PDF - English - NBN
Learn More€89.00 -
NF EN ISO 7510, T57-210 (02/2024)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants
2/1/2024 - Paper - French - AFNOR
Learn More€48.00 -
ASTM F1733-24
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
2/1/2024 - PDF - English - ASTM
Learn More€60.00 -
ASTM F1733-24 + Redline
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
2/1/2024 - PDF - English - ASTM
Learn More€71.00 -
ASTM D3261-24
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
2/1/2024 - PDF - English - ASTM
Learn More€60.00 -
ASTM D3261-24 + Redline
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
2/1/2024 - PDF - English - ASTM
Learn More€71.00 -
NBN EN 12201-3:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : Raccords
1/31/2024 - PDF - French - NBN
Learn More€163.00 -
NBN EN 12201-3:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
1/31/2024 - PDF - English - NBN
Learn More€163.00 -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
12/20/2023 - PDF - Spanish - AENOR
Learn More€76.00 -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
12/20/2023 - PDF - English - AENOR
Learn More€91.20 -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
12/20/2023 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
12/20/2023 - PDF - English - AENOR
Learn More€102.00 -
DIN CEN/TS 1046:2023-12
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation, German version CEN/TS 1046:2021
12/1/2023 - PDF - German - DIN
Learn More€84.02 -
ASTM D2152-23
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
11/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM D2152-23 + Redline
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
11/1/2023 - PDF - English - ASTM
Learn More€63.00 -
ASTM F2986-23
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
11/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM F2986-23 + Redline
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
11/1/2023 - PDF - English - ASTM
Learn More€71.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - English - AENOR
Learn More€72.00 -
NBN ISO 4982:2023
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria ISO 4982:2023
10/17/2023 - PDF - English - NBN
Learn More€163.00 -
DIN EN ISO 13267:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022), German version EN ISO 13267:2023
9/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13268:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022), German version EN ISO 13268:2023
9/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13266:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022), German version EN ISO 13266:2023
9/1/2023 - PDF - German - DIN
Learn More€59.63 -
ASTM F1960-23b
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
9/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1960-23b + Redline
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
9/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM D3034-23
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
9/1/2023 - PDF - English - ASTM
Learn More€60.00 -
ASTM D3034-23 + Redline
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
9/1/2023 - PDF - English - ASTM
Learn More€72.00 -
DIN EN 448:2023-08
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene, German and English version prEN 448:2023
8/1/2023 - PDF - English, German - DIN
Learn More€110.00 -
ASTM D6041-23
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
8/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM D6041-23 + Redline
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
8/1/2023 - PDF - English - ASTM
Learn More€65.00 -
23/30476766 DC:2023
BS EN 448. District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
7/6/2023 - PDF - English - BSI
Learn More€24.00 -
PD ISO/TS 16422-3:2023
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Fittings
7/5/2023 - PDF - English - BSI
Learn More€250.00 -
ASTM D2466-23
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
7/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2466-23 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
7/1/2023 - PDF - English - ASTM
Learn More€65.00 -
23/30456312 DC:2023
BS ISO 10928. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
4/24/2023 - PDF - English - BSI
Learn More€24.00 -
ASTM F1866-23
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
4/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1866-23 + Redline
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
4/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM F2735-23
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
4/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F2735-23 + Redline
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
4/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM F3348-23a
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
4/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F3348-23a + Redline
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
4/1/2023 - PDF - English - ASTM
Learn More€65.00 -
€54.00
-
€65.00
-
ASTM F438-23
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
4/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F438-23 + Redline
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
4/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM F2159-23a
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
3/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F2159-23a + Redline
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
3/1/2023 - PDF - English - ASTM
Learn More€65.00 -
DIN EN ISO 11296-9:2023-03
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022), German version EN ISO 11296-9:2022
3/1/2023 - PDF - German - DIN
Learn More€110.00 -
PD CEN/TS 17176-3:2022 + Redline
Tracked Changes. Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
2/27/2023 - PDF - English - BSI
Learn More€326.00 -
ASTM F1970-23
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
2/15/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F1970-23 + Redline
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
2/15/2023 - PDF - English - ASTM
Learn More€65.00 -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
2/15/2023 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
2/15/2023 - PDF - English - AENOR
Learn More€99.60 -
23/30437565 DC:2023
BS ISO 13265. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
2/8/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
2/2/2023 - PDF - English - BSI
Learn More€180.00 -
ASTM F3347-23
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
2/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F3347-23 + Redline
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
2/1/2023 - PDF - English - ASTM
Learn More€65.00 -
ASTM F2145-23
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
2/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F2145-23 + Redline
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
2/1/2023 - PDF - English - ASTM
Learn More€65.00 -
BS EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
1/25/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
1/25/2023 - PDF - English - BSI
Learn More€180.00 -
23/30427624 DC:2023
BS ISO 16422-1. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 1. General
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
23/30427627 DC:2023
BS ISO 16422-2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 2:
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
23/30427632 DC:2023
BS ISO 16422-5. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 5. Fitness purpose system
1/19/2023 - PDF - English - BSI
Learn More€24.00 -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
1/15/2023 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
1/15/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
1/15/2023 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
1/15/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
1/15/2023 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
1/15/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
1/14/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
1/14/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
1/14/2023 - PDF - English - NBN
Learn More€58.00 -
NF EN ISO 13266, P16-367 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
1/1/2023 - Paper - French - AFNOR
Learn More€48.00 -
NF EN ISO 13267, P16-368 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
1/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
NF EN ISO 13268, P16-369 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
1/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
ASTM D2992-22
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
12/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM D2992-22 + Redline
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
12/1/2022 - PDF - English - ASTM
Learn More€65.00 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
11/16/2022 - PDF - English - AENOR
Learn More€62.40 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
10/19/2022 - PDF - English - AENOR
Learn More€88.80 -
BS EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
10/17/2022 - PDF - English - BSI
Learn More€293.00 -
NBN EN ISO 11296-9:2022
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€65.00 -
NF EN 17176-2+A1, T54-968-2 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 17176-2/IN1, T54-968-2/IN1 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
10/1/2022 - Paper - French - AFNOR
Learn More€43.50 -
ASTM D3311-22
Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
10/1/2022 - PDF - English - ASTM
Learn More€78.00 -
ASTM D3311-22 + Redline
Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
10/1/2022 - PDF - English - ASTM
Learn More€93.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
9/28/2022 - PDF - English - AENOR
Learn More€69.60 -
BS EN ISO 15877-3:2009+A2:2021
Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Fittings
9/21/2022 - PDF - English - BSI
Learn More€348.00 -
BS ISO 17885:2021
Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
8/15/2022 - PDF - English - BSI
Learn More€331.00 -
NF EN 14420-2, T47-290-2 (08/2022)
Hose fittings with clamp units - Part 2 : hose side parts of hose tail
8/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
NF EN 14420-4, T47-290-4 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 4 : raccordements à bride
8/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
NF EN 14420-7, T47-290-7 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 7 : raccords à cames
8/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
ASTM F409-22
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
7/1/2022 - PDF - English - ASTM
Learn More€57.00 -
ASTM F409-22 + Redline
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
7/1/2022 - PDF - English - ASTM
Learn More€68.00 -
ASTM D2122-22
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
7/1/2022 - PDF - English - ASTM
Learn More€51.00 -
ASTM D2122-22 + Redline
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
7/1/2022 - PDF - English - ASTM
Learn More€61.00 -
DIN CEN/TS 17176-3:2022-07
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings, German version CEN/TS 17176-3:2022
7/1/2022 - PDF - German - DIN
Learn More€68.60 -
PD CEN/TS 17176-3:2022
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
6/30/2022 - PDF - English - BSI
Learn More€250.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - Spanish - AENOR
Learn More€96.00 -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
5/25/2022 - PDF - English - AENOR
Learn More€115.20 -
BS 8561:2021 + Redline
Tracked Changes. Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
5/17/2022 - PDF - English - BSI
Learn More€326.00 -
UNE-EN 1555-3:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
5/11/2022 - PDF - Spanish - AENOR
Learn More€77.00 -
UNE-EN 1555-3:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
5/11/2022 - PDF - English - AENOR
Learn More€92.40 -
NF EN 14541-1, P16-373-1 (05/2022)
Tubes et raccords en plastique - Utilisation de recyclats thermoplastiques - Partie 1 : vocabulaire
5/1/2022 - Paper - French - AFNOR
Learn More€48.00 -
DIN EN ISO 15874-3:2022-05
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd 1:2018 + Amd 2:2021), German and English version EN ISO 15874-3:2013 + A1:2018 + A2:2021.
5/1/2022 - PDF - English, German - DIN
Learn More€110.00 -
DIN EN ISO 15876-3:2022-05
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 15876-3:2017 + A1:2020 + A2:2021.
5/1/2022 - PDF - English, German - DIN
Learn More€110.00 -
DIN EN ISO 22391-3:2022-05
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 22391-3:2009 + A1:2020 + A2:2021.
5/1/2022 - PDF - English, German - DIN
Learn More€104.95 -
BS EN ISO 22391-3:2009+A2:2021
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fittings
4/22/2022 - PDF - English - BSI
Learn More€293.00 -
CEN/TS 17176-3:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
4/9/2022 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 17176-3:2022
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
4/9/2022 - PDF - English - NBN
Learn More€121.00 -
DIN EN ISO 11298-4:2022-04
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021), German version EN ISO 11298-4:2021.
4/1/2022 - PDF - German - DIN
Learn More€126.26 -
22/30385843 DC:2022
BS ISO 23627. Plastics piping systems for non-pressure underground drainage and sewerage. Steel-Reinforced-Polyethylene (SRPE). Corrugated Pipes and fittings
3/30/2022 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 15876-3:2017+A2:2021
Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings
3/23/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 15874-3:2013+A2:2021
Plastics piping systems for hot and cold water installations. Polypropylene (PP) Fittings
3/21/2022 - PDF - English - BSI
Learn More€293.00 -
DIN EN ISO 15875-3:2022-03
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 15875-3:2003 + A1:2020 + A2:2021.
3/1/2022 - PDF - English, German - DIN
Learn More€99.35 -
BS EN ISO 21003-3:2008+A1:2021
Multilayer piping systems for hot and cold water installations inside buildings Fittings
2/16/2022 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 15875-3:2003+A2:2021
Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fittings
2/3/2022 - PDF - English - BSI
Learn More€250.00 -
ASTM F3536-22
Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
2/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM F3536-22 + Redline
Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
2/1/2022 - PDF - English - ASTM
Learn More€65.00 -
BS EN 1555-3:2021 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
1/17/2022 - PDF - English - BSI
Learn More€382.00 -
DIN EN 1555-3:2021-12
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings, German version EN 1555-3:2021.
12/1/2021 - PDF - German - DIN
Learn More€104.95 -
BS 8561:2021
Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
11/25/2021 - PDF - English - BSI
Learn More€250.00 -
BS ISO 10952:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in a deflected condition
11/9/2021 - PDF - English - BSI
Learn More€235.00 -
21/30441043 DC:2021
BS EN 16904. Plastics piping systems. Environmental product declarations. Product Category rules complementary to EN 15804, for plastic piping systems inside buildings
11/4/2021 - PDF - English - BSI
Learn More€24.00 -
21/30441046 DC:2021
BS EN 16903. Plastics piping systems. Environmental product declarations. Product Category Rules complementary to EN 15804, for buried plastics piping systems
11/4/2021 - PDF - English - BSI
Learn More€24.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - English - AENOR
Learn More€62.40 -
ASTM D2729-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM D2729-21 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM F2880-21
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes in. to 65 in.3 4
11/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F2880-21 + Redline
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes in. to 65 in.3 4
11/1/2021 - PDF - English - ASTM
Learn More€61.00 -
DIN EN ISO 11296-4:2021-11
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021), German version EN ISO 11296-4:2018 + A1:2021
11/1/2021 - PDF - German - DIN
Learn More€131.96 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
10/29/2021 - PDF - English - NBN
Learn More€20.00 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
10/27/2021 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
10/27/2021 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
10/27/2021 - PDF - English - AENOR
Learn More€85.20 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 15877-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
10/16/2021 - PDF - English - NBN
Learn More€20.00 -
BS ISO 7432:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
10/4/2021 - PDF - English - BSI
Learn More€326.00 -
NF EN ISO 15877-3/A2, T54-014-3/A2 (10/2021)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3 : Fittings - Amendment 2
10/1/2021 - Paper - French - AFNOR
Learn More€75.67