17.040.30 : Measuring instruments
-
DIN EN ISO 5059-1:2024-02
Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024), German and English version prEN ISO 5059-1:2024
2/1/2024 - PDF - English, German - DIN
Learn More€79.72 -
PR NF EN ISO 5059-1, E11-098-1PR (02/2024)
Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel : micromètres d'intérieur - Partie 1 : Micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques
2/1/2024 - Paper - English, French - AFNOR
Learn More€80.50 -
24/30448290 DC:2024
BS ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers Part 1: Two-point micrometers. Design and metrological characteristics
1/2/2024 - PDF - English - BSI
Learn More€24.00 -
DIN EN ISO 9013/A1:2024-01
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/DAM 1:2023), German and English version EN ISO 9013:2017/prA1:2023
1/1/2024 - PDF - English, German - DIN
Learn More€32.34 -
DIN EN ISO 10360-10:2023-11
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021), German version EN ISO 10360-10:2021
11/1/2023 - PDF - German - DIN
Learn More€136.82 -
DIN EN ISO 10360-13:2023-11
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021), German version EN ISO 10360-13:2021
11/1/2023 - PDF - German - DIN
Learn More€152.71 -
PR NF EN ISO 25178-602, E05-031-602PR (11/2023)
Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 602 : Conception et caractéristiques des instruments sans contact (à capteur confocal chromatique)
11/1/2023 - Paper - English, French - AFNOR
Learn More€88.50 -
PR NF EN ISO 25178-601, E05-031-601PR (11/2023)
Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 601 : Conception et caractéristiques des instruments à contact (à stylet)
11/1/2023 - Paper - English, French - AFNOR
Learn More€88.50 -
BS EN 60061-3:1993+A59:2023
Lamp caps and holders together with gauges for the control of interchangeability safety Gauges
11/1/2023 - PDF - English - BSI
Learn More€449.00 -
DIN EN ISO 5463:2023-09
Geometrical product specifications (GPS) - Form measuring equipment, Rotary axis form measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023), German and English version prEN ISO 5463:2023
9/1/2023 - PDF - English, German - DIN
Learn More€141.96 -
DIN EN ISO 3611:2023-09
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023), German and English version EN ISO 3611:2023
9/1/2023 - PDF - English, German - DIN
Learn More€85.79 -
PR NF EN ISO 5463, E11-108PR (09/2023)
Spécification géométrique des produits (GPS) - Équipements de mesure de forme , Instruments de mesure de forme à plateau tournant - Caractéristiques de conception et caractéristiques métrologiques
9/1/2023 - Paper - English, French - AFNOR
Learn More€138.50 -
NF E11-096 (08/2023)
Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des jauges de profondeur à coulisseau
8/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
NF E11-091 (08/2023)
Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des pieds à coulisse
8/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
23/30438188 DC:2023
BS EN ISO 5463. Geometrical product specifications (GPS). Form measuring equipment, Rotary axis form measuring instruments. Design and metrological characteristics
8/1/2023 - PDF - English - BSI
Learn More€24.00 -
UNE 82210:2023
Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
7/5/2023 - PDF - Spanish - AENOR
Learn More€71.00 -
BS EN ISO 3611:2023 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
6/7/2023 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 3611:2023
Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
6/2/2023 - PDF - English - BSI
Learn More€250.00 -
NBN EN ISO 3611:2023
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur (ISO 3611:2023)
6/1/2023 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 3611:2023
Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
6/1/2023 - PDF - English - NBN
Learn More€89.00 -
NF EN ISO 3611, E11-092 (05/2023)
Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
5/1/2023 - Paper - French - AFNOR
Learn More€75.67 -
DIN EN ISO 12179:2023-04
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021), German version EN ISO 12179:2022
4/1/2023 - PDF - German - DIN
Learn More€92.62 -
UNE-EN ISO 10360-10:2023
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
2/8/2023 - PDF - Spanish - AENOR
Learn More€100.00 -
UNE-EN ISO 10360-10:2023
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
2/8/2023 - PDF - English - AENOR
Learn More€120.00 -
UNE-EN ISO 12179:2023
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
2/8/2023 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 12179:2023
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
2/8/2023 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN ISO 1:2022
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) (Endorsed by Asociación Española de Normalización in August of 2022.)
10/12/2022 - PDF - English - AENOR
Learn More€42.00 -
BS EN ISO 12179:2022 + Redline
Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
6/10/2022 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 12179:2022
Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
5/18/2022 - PDF - English - BSI
Learn More€250.00 -
UNE-EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021) (Endorsed by Asociación Española de Normalización in March of 2022.)
3/1/2022 - PDF - English - AENOR
Learn More€100.00 -
NBN EN ISO 12179:2022
Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
1/22/2022 - PDF - English - NBN
Learn More€121.00 -
NBN EN ISO 12179:2022
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Kalibrierung von Tastschnittgeräten (ISO 12179:2021)
1/22/2022 - PDF - German - NBN
Learn More€121.00 -
VDI/VDE/DGQ 2618 Blatt 17.2:2022-01
Inspection of measuring and test equipment - Test instruction for length setting instruments
1/1/2022 - PDF - English, German - VDI
Learn More€89.84 -
NF EN ISO 12179, E05-056 (01/2022)
Geometrical product specifications (GPS) - Surface texture : Profile method - Calibration of contact (stylus) instruments
1/1/2022 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 10360-10:2021 + Redline
Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers
12/23/2021 - PDF - English - BSI
Learn More€454.00 -
ISO 12179:2021
Geometrical product specifications (GPS)
Surface texture: Profile method
12/20/2021 - Paper - English - ISO
Learn More€148.00 -
VDI/VDE 2617 Blatt 6.1:2021-11
Accuracy of coordinate measuring machines - Characteristics and their testing - Code of practice to the application of DIN EN ISO 10360-7 for coordinate measuring machines equipped with image processing systems
11/1/2021 - PDF - English, German - VDI
Learn More€125.94 -
NF E11-099 (11/2021)
Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
11/1/2021 - Paper - French - AFNOR
Learn More€75.67 -
BS EN ISO 10360-13:2021
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Optical 3D CMS
9/28/2021 - PDF - English - BSI
Learn More€348.00 -
NBN EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
9/24/2021 - PDF - French - NBN
Learn More€184.00 -
NBN EN ISO 10360-13:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
9/24/2021 - PDF - English - NBN
Learn More€184.00 -
NBN EN ISO 10360-13:2021
Geometrische Produktspezifikationen (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmesssysteme (KMS) - Teil 13: Optische 3D KMS (ISO 10360-13:2021)
9/24/2021 - PDF - German - NBN
Learn More€184.00 -
NBN EN ISO 10360-10:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
9/18/2021 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 10360-10:2021
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
9/18/2021 - PDF - English - NBN
Learn More€163.00 -
NBN EN ISO 10360-10:2021
Geometrische Produktspezifikationen (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmesssysteme (KMS) - Teil 10: Lasertracker (ISO 10360 10:2021)
9/18/2021 - PDF - German - NBN
Learn More€163.00 -
BS EN ISO 10360-10:2021
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers
9/17/2021 - PDF - English - BSI
Learn More€348.00 -
VDI/VDE/DGQ/DKD 2618 Blatt 5.1:2021-09
Inspection of measuring and test equipment - Test instruction for straight edges
9/1/2021 - PDF - English, German - VDI
Learn More€72.31 -
NF EN ISO 10360-13, E11-150-13 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13 : Optical 3D CMS
9/1/2021 - Paper - French - AFNOR
Learn More€130.67 -
NF EN ISO 10360-10, E11-150-10 (09/2021)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10 : laser trackers for measuring point-to-point distances
9/1/2021 - Paper - French - AFNOR
Learn More€119.00 -
VDI/VDE/DGQ 2618 Blatt 11.1:2021-08
Inspection of measuring and test equipment - Test instruction for mechanical dial gauges
8/1/2021 - PDF - English, German - VDI
Learn More€110.16 -
VDI/VDE/DGQ/DKD 2618 Blatt 1.1:2021-07
Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principles
7/1/2021 - PDF - English, German - VDI
Learn More€121.61 -
DIN 32877-2:2021-07
Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
7/1/2021 - PDF - German - DIN
Learn More€104.95 -
UNE-EN ISO 25178-72:2020/A1:2021
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
6/16/2021 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 25178-72:2020/A1:2021
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020)
6/16/2021 - PDF - English - AENOR
Learn More€72.00 -
VDI/VDE/DGQ/DKD 2618 Blatt 10.8:2021-06
Inspection of measuring and test equipment - Test instructions for internal micrometers with three-line-contact
6/1/2021 - PDF - German - VDI
Learn More€72.31 -
ASTM A1030/A1030M-21
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
5/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM A1030/A1030M-21 + Redline
Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
5/1/2021 - PDF - English - ASTM
Learn More€61.00 -
ASTM D7759/D7759M-21
Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
5/1/2021 - PDF - English - ASTM
Learn More€57.00 -
ASTM D7759/D7759M-21 + Redline
Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
5/1/2021 - PDF - English - ASTM
Learn More€68.00 -
21/30378338 DC:2021
BS ENISO 10360-11. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Part 11. CMSs using the principle of X-ray computed tomography (CT)
4/8/2021 - PDF - English - BSI
Learn More€24.00 -
VDI/VDE/DGQ/DKD 2618 Blatt 11.4 Berichtigung:2021-04
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges, Corrigendum concerning standard VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08
4/1/2021 - PDF - English, German - VDI
Learn More€0.00 -
UNE-EN ISO 5458:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
2/17/2021 - PDF - Spanish - AENOR
Learn More€96.00 -
UNE-EN ISO 5458:2021
Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
2/17/2021 - PDF - English - AENOR
Learn More€115.20 -
VDI/VDE 2617 Blatt 6.2:2021-02
Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360-8 to coordinate measuring machines with optical distance sensors
2/1/2021 - PDF - English, German - VDI
Learn More€132.13 -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - PDF - Spanish - AENOR
Learn More€98.00 -
UNE-EN ISO 14978:2021
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/27/2021 - PDF - English - AENOR
Learn More€117.60 -
ASTM D7299-20
Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
11/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7299-20 + Redline
Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
11/1/2020 - PDF - English - ASTM
Learn More€61.00 -
VDI/VDE 2617 Blatt 12.2:2020-10
Accuracy of coordinate measuring machines - Characteristics and their testing - Acceptance and reverification tests for optical CMM measuring microgeometries according to DIN EN ISO 10360-8 and VDI/VDE 2617 Part 6.2
10/1/2020 - PDF - German - VDI
Learn More€89.84 -
ASTM E1685-20
Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
10/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM E1685-20 + Redline
Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique
10/1/2020 - PDF - English - ASTM
Learn More€61.00 -
VDI/VDE/DGQ/DKD 2618 Blatt 11.4:2020-08
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauges
8/1/2020 - PDF - English, German - VDI
Learn More€89.84 -
UNE-EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More€68.00 -
UNE-EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) (Endorsed by Asociación Española de Normalización in July of 2020.)
7/1/2020 - PDF - English - AENOR
Learn More€94.00 -
NBN EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
6/25/2020 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
6/25/2020 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 13385-2:2020
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
6/25/2020 - PDF - English - NBN
Learn More€89.00 -
BS EN ISO 13385-2:2020 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/3/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 13385-2:2020
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/1/2020 - PDF - English - BSI
Learn More€180.00 -
NBN EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
5/27/2020 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
5/27/2020 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 10360-5:2020
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020)
5/27/2020 - PDF - English - NBN
Learn More€163.00 -
NF EN ISO 13385-2, E11-085-2 (05/2020)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : design and metrological characteristics of calliper depth gauges - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 2 : Jauges de profondeur , caractéristiques de conception et caractéristiques métrologiques
5/1/2020 - Paper - French - AFNOR
Learn More€75.67 -
UNE-EN ISO 25178-73:2019
Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More€65.00 -
UNE-EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More€69.00 -
BS EN ISO 10360-5:2020
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
4/21/2020 - PDF - English - BSI
Learn More€348.00 -
NF EN ISO 10360-5, E11-150-5 (04/2020)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes à mesurer tridimensionnelles (SMT) - Partie 5 : MMT utilisant des systèmes de palpage à stylet simple ou à stylets multiples utilisant un mode de mesurage par point discret et/ou par scan
4/1/2020 - Paper - French - AFNOR
Learn More€119.00 -
DIN 32877-1:2020-04
Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 1: Basic principles and terms
4/1/2020 - PDF - German - DIN
Learn More€79.72 -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 25178-72:2020
Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
3/4/2020 - PDF - English - AENOR
Learn More€88.80 -
DIN EN ISO 13385-1:2020-03
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019), German version EN ISO 13385-1:2019
3/1/2020 - PDF - German - DIN
Learn More€85.79 -
BS EN ISO 3040:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
2/26/2020 - PDF - English - BSI
Learn More€382.00 -
VDI/VDE-MT 2636:2020-01
Certification of courses and examinations in strain gauge measurement technology
1/1/2020 - PDF - English, German - VDI
Learn More€62.04 -
NF E11-015 (12/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment : measuring rods with spherical ends - Design and metrological requirements
12/1/2019 - Paper - French - AFNOR
Learn More€48.00 -
BS EN ISO 14978:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
11/27/2019 - PDF - English - BSI
Learn More€454.00 -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 13385-1:2019
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019)
10/23/2019 - PDF - English - NBN
Learn More€89.00 -
BS EN ISO 13385-1:2019
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
9/24/2019 - PDF - English - BSI
Learn More€250.00 -
NF EN ISO 13385-1, E11-085-1 (09/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : design and metrological characteristics of callipers - Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Partie 1 : Pieds à coulisse, caractéristiques de conception et caractéristiques métrologiques
9/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
19/30400877 DC:2019
BS EN IEC 60061-3 AMD58. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
8/7/2019 - PDF - English - BSI
Learn More€24.00 -
DIN EN ISO 14978:2019-06
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018), German version EN ISO 14978:2018
6/1/2019 - PDF - German - DIN
Learn More€126.26 -
FD ISO/TR 230-11, E60-100-11 (06/2019)
Test code for machine tools - Part 11 : measuring instruments suitable for machine tool geometry tests
6/1/2019 - Paper - French - AFNOR
Learn More€192.00 -
NF E11-098-1 (04/2019)
Geometrical Product Specifications (GPS) - Dimensional measuring equipments - Part 1 : internal micrometer with tow spindles - Metrological and design characteristics - Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel - Partie 1 : micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques
4/1/2019 - Paper - French - AFNOR
Learn More€60.67 -
NF E11-098-2 (04/2019)
Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
4/1/2019 - Paper - French - AFNOR
Learn More€48.00 -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
3/27/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 16610-30:2019
Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
3/27/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 17450-4:2019
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
3/27/2019 - PDF - English - AENOR
Learn More€81.60 -
BS EN ISO 14978:2018
Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
3/21/2019 - PDF - English - BSI
Learn More€348.00 -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 14978:2019
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018)
1/30/2019 - PDF - English - NBN
Learn More€163.00 -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 16610-28:2018
Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
12/5/2018 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 16610-31:2018
Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
12/5/2018 - PDF - English - AENOR
Learn More€81.60 -
NF EN ISO 14978, E11-001 (12/2018)
Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment
12/1/2018 - Paper - French - AFNOR
Learn More€119.00 -
ISO 14978:2018 (R2024)
Geometrical product specifications (GPS)
General concepts and requirements for GPS measuring equipment
11/28/2018 - Paper - French - ISO
Learn More€199.00 -
VDI/VDE 2617 Blatt 8:2018-10
Accuracy of coordinate measuring machines - Characteristics and their testing - Test process suitability of measurements with coordinate measuring machines
10/1/2018 - PDF - English, German - VDI
Learn More€154.13 -
VDI/VDE 2631 Blatt 3:2018-09
Measurement of form - Properties and selection of filters
9/1/2018 - PDF - English, German - VDI
Learn More€89.84 -
VDI/VDE 2617 Blatt 2.2:2018-07
Accuracy of coordinate measuring machines - Characteristics and their testing - Form measurement with coordinate measuring machines
7/1/2018 - PDF - English, German - VDI
Learn More€99.25 -
DIN EN ISO 14253-1:2018-07
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017), German version EN ISO 14253-1:2017
7/1/2018 - PDF - German - DIN
Learn More€92.62 -
18/30379226 DC:2018
BS EN IEC 60061-3 AMD57. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
6/22/2018 - PDF - English - BSI
Learn More€24.00 -
18/30376927 DC:2018
BS EN 60061-3 AMD56. Lamp caps and holders together with gauges for the control of interchangeability safety Part 3. Gauges
5/3/2018 - PDF - English - BSI
Learn More€24.00 -
VDI/VDE 2635 Blatt 2:2018-03
Experimental structure analysis - Recommendation on the implementation of strain measurements at high temperatures
3/1/2018 - PDF - German - VDI
Learn More€99.25 -
UNE-EN ISO 25178-71:2017
Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.)
3/1/2018 - PDF - English - AENOR
Learn More€60.00 -
TS B 0034-2:2018
Fuel oil flow meters - Measuring instruments used in transaction or certification - Part 2: Mobile type fuel oil flow meters
2/20/2018 - PDF - Japanese - JSA
Learn More€50.18 -
TS B 0034-1:2018
Fuel oil flow meters - Measuring instruments used in transfer or certification - Part 1: Fuel oil flow meters
2/20/2018 - PDF - Japanese - JSA
Learn More€91.91 -
DIN EN ISO 10360-12:2018-02
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016), German version EN ISO 10360-12:2016
2/1/2018 - PDF - German - DIN
Learn More€126.26 -
DIN EN ISO 10360-12:2018-02
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
2/1/2018 - PDF - English - DIN
Learn More€157.66 -
€36.27
-
€36.27
-
€113.00
-
€0.00
-
NF EN ISO 14253-1, E10-201-1 (12/2017)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications - Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : Règles de décision pour contrôler la conformité ou la non - conformité à la spécification
12/1/2017 - Paper - French - AFNOR
Learn More€86.50 -
€133.00
-
€159.60
-
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
7/26/2017 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-EN ISO 9013:2017
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
7/26/2017 - PDF - English - AENOR
Learn More€98.40 -
UNE-EN ISO 14405-3:2017
Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) (Endorsed by Asociación Española de Normalización in July of 2017.)
7/1/2017 - PDF - English - AENOR
Learn More€69.00 -
DIN EN ISO 9013:2017-05
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
5/1/2017 - PDF - English - DIN
Learn More€124.21 -
DIN EN ISO 1938-2:2017-05
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
5/1/2017 - PDF - English - DIN
Learn More€91.12 -
DIN EN ISO 9013:2017-05
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017), German version EN ISO 9013:2017
5/1/2017 - PDF - German - DIN
Learn More€99.35 -
DIN EN ISO 1938-2:2017-05
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017), German version EN ISO 1938-2:2017
5/1/2017 - PDF - German - DIN
Learn More€72.80 -
UNE-EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016) (Endorsed by Asociación Española de Normalización in May of 2017.)
5/1/2017 - PDF - English - AENOR
Learn More€78.00 -
€0.00
-
UNE-EN ISO 1660:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
4/1/2017 - PDF - English - AENOR
Learn More€87.00 -
NBN EN ISO 1938-2:2017
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/22/2017 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 1938-2:2017
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
3/22/2017 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 1938-2:2017
Geometrische Produktspezifikation (GPS) - Längenprüftechnik - Teil 2: Prüflehren für Rachenlehren (ISO 1938-2:2017)
3/22/2017 - PDF - German - NBN
Learn More€58.00 -
From: €36.27
-
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN ISO 17450-3:2017
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
3/1/2017 - PDF - English - AENOR
Learn More€85.20 -
BS EN ISO 1938-2:2017
Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
2/28/2017 - PDF - English - BSI
Learn More€180.00 -
UNE-EN ISO 10360-8:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/18/2017 - PDF - Spanish - AENOR
Learn More€107.00 -
UNE-EN ISO 10360-8:2017
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
1/18/2017 - PDF - English - AENOR
Learn More€128.40 -
UNE-EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
12/14/2016 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
12/14/2016 - PDF - English - AENOR
Learn More€88.80 -
NF EN ISO 10360-12, E11-150-12 (12/2016)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12 : articulated arm coordinate measurement machines (CMM) - Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 12 : MMT à bras articulés
12/1/2016 - Paper - French - AFNOR
Learn More€108.00 -
BS EN ISO 10360-12:2016
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Articulated arm measurement machines (CMM)
11/30/2016 - PDF - English - BSI
Learn More€348.00 -
NBN EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
11/23/2016 - PDF - French - NBN
Learn More€163.00 -
NBN EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
11/23/2016 - PDF - German - NBN
Learn More€163.00 -
NBN EN ISO 10360-12:2016
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016)
11/23/2016 - PDF - English - NBN
Learn More€163.00 -
VDI/VDE/DGQ 2618 Blatt 11.4:2016-11
Inspection of measuring and test equipment - Test instructions for electronic digital indicator gauge
11/1/2016 - PDF - German - VDI
Learn More€68.50 -
VDI/VDE/DGQ 2618 Blatt 4.5:2016-11
Inspection of measuring and test equipment - Test instruction for setting standards for thread micrometers
11/1/2016 - PDF - German - VDI
Learn More€49.38 -
ISO 10360-12:2016 (R2021)
Geometrical product specifications (GPS)
Acceptance and reverification tests for coordinate measuring systems (CMS)
9/30/2016 - Paper - French - ISO
Learn More€199.00 -
JIS B 7741:2016
Calibration of extensometer systems used in uniaxial testing
8/22/2016 - PDF - Japanese - JSA
Learn More€50.18 -
€36.27
-
€124.00
-
€107.75
-
VDI/VDE 2631 Blatt 6:2016-08
Form measurement - Determination of the straightness deviation of the linear guide
8/1/2016 - PDF - English, German - VDI
Learn More€49.38 -
BS EN ISO 3040:2016
Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
5/31/2016 - PDF - English - BSI
Learn More€293.00 -
NBN EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
5/27/2016 - PDF - French - NBN
Learn More€121.00 -
NBN EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
5/27/2016 - PDF - German - NBN
Learn More€121.00 -
NBN EN ISO 25178-1:2016
Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
5/27/2016 - PDF - English - NBN
Learn More€121.00 -
€58.50
-
BS EN ISO 25178-1:2016
Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
4/30/2016 - PDF - English - BSI
Learn More€293.00 -
NF E11-057 (04/2016)
Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem
4/1/2016 - Paper - French - AFNOR
Learn More€60.67 -
NF E11-056 (04/2016)
Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger
4/1/2016 - Paper - French - AFNOR
Learn More€48.00 -
NBN EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
12/24/2015 - PDF - French - NBN
Learn More€89.00 -
NBN EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
12/24/2015 - PDF - German - NBN
Learn More€89.00 -
NBN EN ISO 16610-60:2015
Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015)
12/24/2015 - PDF - English - NBN
Learn More€89.00 -
NF E11-021 (12/2015)
Steel gauges - Plain plug gauges (horology series) - Diameters from 0,1 mm to 3 mm
12/1/2015 - Paper - French - AFNOR
Learn More€34.67 -
NF EN ISO 1938-1, E02-200-1 (12/2015)
Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : plain limit gauges of linear size - Spécification géométrique des produits (GPS)
12/1/2015 - Paper - French - AFNOR
Learn More€99.00 -
BS EN ISO 16610-60:2015
Geometrical Product Specification (GPS). Filtration Linear areal filters: Basic concepts
11/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 463:2006
Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
10/31/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 13225:2012
Geometrical product specifications (GPS). Dimensional measuring equipment, Height gauges. Design and metrological characteristics
10/31/2015 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 9493:2010
Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
10/31/2015 - PDF - English - BSI
Learn More€250.00 -
VDI/VDE 2635 Blatt 1:2015-07
Experimental structure analysis - Metallic bonded resistance strain gauges - Characteristics and testing conditions
7/1/2015 - PDF - English, German - VDI
Learn More€128.38 -
€36.27
-
VDI/VDE/DGQ 2618 Blatt 17.1 Berichtigung:2015-06
Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines, Corrigendum concerning standard VDI/VDE/DGQ 2618 Part 17.1:2014-12
6/1/2015 - PDF - English, German - VDI
Learn More€0.00 -
BS 4311-1:2007
Gauge blocks manufactured to imperial specification Specification and validation
2/28/2015 - PDF - English - BSI
Learn More€180.00 -
€50.18
-
VDI/VDE/DGQ 2618 Blatt 17.1:2014-12
Inspection of measuring and test equipment - Test instruction for horizontal length measuring machines
12/1/2014 - PDF - English, German - VDI
Learn More€82.13 -
NF E02-314 (12/2014)
Steel gauges - Plug gauges for 5 % tapers - Calibres en acier
12/1/2014 - Paper - French - AFNOR
Learn More€48.00 -
NF E02-316 (12/2014)
Steel gauges - 5 % taper rings with tapped hole - Calibres en acier
12/1/2014 - Paper - French - AFNOR
Learn More€48.00 -
NF E02-318 (12/2014)
Steel gauges - 7/24 taper plug gauges - Calibres en acier
12/1/2014 - Paper - French - AFNOR
Learn More€48.00 -
NF E02-319 (12/2014)
Steel gauges - 7/24 taper ring gauges - Calibres en acier
12/1/2014 - Paper - French - AFNOR
Learn More€48.00 -
VDI/VDE/DGQ 2618 Blatt 4.6:2014-11
Inspection of measuring and test equipment - Test instruction for test cylinders and test mandrels
11/1/2014 - PDF - English, German - VDI
Learn More€90.75