Série prEN 9100 ASD-STAN 2016

Achetez toutes les normes ASD-STAN ou prEN sur normadoc.com

 prEN Collection complète ou à l'unité vendu par Normadoc.

 

 

prEN 9100 P4

 

Quality Management Systems - Requirements for Aviation, Space and Defence Organizations

ASD-STAN prENs are technically equal to the later EN publications by the CEN members.
Form: prENRegistration Number: 9100Edition: P4
Date of Publication: 30-Sep-2016Number of pages: 59 
Document Type: Quality StandardDomain: Quality Series 
Scope: This standard includes EN ISO 9001:2015 quality management system requirements and specifies additional aviation, space, and defence industry requirements, definitions, and notes.
It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.
 

prEN 9101 P8

Quality Management Systems - Audit Requirements for Aviation, Space, and Defense Organisations

ASD-STAN prENs are technically equal to the later EN publications by the CEN members.
Form: prENRegistration Number: 9101Edition: 2016
Date of Publication: 28-Oct-2016Number of pages: 29 
Document Type: Quality StandardDomain: Quality 
Scope: 1.1 General
This standard defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the EN 9100-series standards, the organization's QMS documentation and customer and statutory/regulatory requirements.
The requirements in this standard are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing and certification as published by ISO/IEC (i. e., EN ISO/IEC 17000, EN ISO/IEC 17021-1). When there is conflict with these standards, the requirements of the EN 9101 standard shall take precedence.
NOTE 1 In this standard, the term “EN 9100-series standards” comprises the following Aerospace Quality Management System (AQMS) standards: EN 9100, EN 9110 and EN 9120; developed by the IAQG and published by various national standards bodies.
NOTE 2 In addition to this standard, the IAQG publishes deployment support material on the IAQG website (see http://www.sae.org/iaqg/) that can be used by audit teams, when executing the audit process.
1.2 Application
This standard shall be used for audits of EN 9100-series standards by CBs for certification of organizations, under the auspices of the aviation, space and defence industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the EN 9104-series standards (i. e., EN 9104-001, EN 9104-002, EN 9104-003).
NOTE Relevant parts of this standard can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).

 

 

prEN 9110 P5

Quality Management Systems - Requirements for Aviation Maintenance Organizations

ASD-STAN prENs are technically equal to the later EN publications by the CEN members.       
Form: prENRegistration Number: 9100Edition: P4
Date of Publication: 30-Sep-2016Number of pages: 59 
Document Type: Quality StandardDomain: Quality Series 
Scope: This standard includes EN ISO 9001:2015 quality management system requirements and specifies additional aviation, space, and defence industry requirements, definitions, and notes.It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.This International Standard specifies requirements for a quality management system when an organization:a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, andb) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.

prEN 9117 P1

Aerospace series - Delegated Product Release Verification

Form: prENRegistration Number: 9117Edition: P1
Date of Publication: 01-Apr-2016Number of pages: 9 
Document Type: prENDomain: Quality 
Scope: This standard specifies requirements for DPRV to establish common product/service requirements for use at all levels of the supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to their supplier (reference 9100 and 9110 standards); to perform product acceptance on their behalf.
The delegating organization shall use this standard as the baseline for establishing a DPRV process, although they may include additional contract requirements to meet their specific needs.

prEN 9120 P5

Quality Management Systems - Requirements for Aviation, Space and Defence Distributors

ASD-STAN prENs are technically equal to the later EN publications by the CEN members.          
Form: prENRegistration Number: 9120Edition: P5
Date of Publication: 28-Oct-2016Number of pages: 58 
Document Type: Quality StandardDomain: Quality 

Scope: This standard includes EN ISO 9001:20152) quality management system requirements and specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements

 

prEN 9133 P2

Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

Form: prENRegistration Number: 9133Edition: P2
Date of Publication: 15-Apr-2016Number of pages: 28 
Document Type: prENDomain: Quality 
Scope: This standard defines a system for the qualification of standard products for aviation, space, and defence applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products.
This standard requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product.
OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain EN 9100 standard quality management system certification approval. This certification shall be visible in the Online Aerospace Supplier Information System (OASIS) database.

 

prEN 9136 P2

Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

Form: prENRegistration Number: 9136Edition: P1
Date of Publication: 01-Nov-2016Number of pages: 58 
Document Type: prEN