49.025 : Materials for aerospace construction

Items 1 to 200 of 8596 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 43
  • DIN EN 3524:2024-04

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm a 6 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version EN 3524:2023
    4/1/2024 - PDF - English, German - DIN
    Learn More
    €59.63

  • DIN EN 3525:2024-04

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm a 20 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version EN 3525:2023
    4/1/2024 - PDF - English, German - DIN
    Learn More
    €59.63

  • DIN EN 3526:2024-04

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm a 6 mm - 980 MPa R<(Index)m> 1180 MPa, German and English version EN 3526:2023
    4/1/2024 - PDF - English, German - DIN
    Learn More
    €59.63

  • DIN EN 3311:2024-04

    Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D 300 mm - 900 MPa R<(Index)m> 1160 MPa, German and English version EN 3311:2023
    4/1/2024 - PDF - English, German - DIN
    Learn More
    €59.63

  • SAE AS 3511C:2024-03-22

    CABLE, SAFETY, KIT, CORROSION RESISTANT STEEL, UNS S30400 (Stabilized: Mar 2024)
    3/22/2024 - PDF - English - SAE
    Learn More
    €54.00

  • SAE AMS 5536R:2024-03-22

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Alloy X or HX) Solution Heat Treated
    3/22/2024 - PDF - English - SAE
    Learn More
    €66.00

  • 24/30487383 DC:2024

    BS EN 3639 Aerospace series - Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980) - Softened and cold worked. Wires for forged fasteners - D = 15 mm. 900 MPa = Rm = 1 100 MPa
    3/21/2024 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 5848F:2024-03-18

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Extrusions, and Rings, Wear and Galling Resistant, 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated
    3/18/2024 - PDF - English - SAE
    Learn More
    €75.00

  • SAE ARP 5088C:2024-03-18

    Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration
    3/18/2024 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AS 5127/2D:2024-03-18

    Test Method for Aerospace Firewall Sealant Flame Penetration
    3/18/2024 - PDF - English - SAE
    Learn More
    €89.00

  • 24/30487386 DC:2024

    BS EN 4700-001 Aerospace series - Steel and heat-resisting alloys Wrought products Technical specification Part 001: Plates, sheets strips
    3/14/2024 - PDF - English - BSI
    Learn More
    €24.00

  • 24/30487392 DC:2024

    BS EN 4700-003 Aerospace series - Steel and heat-resisting alloys Wrought products Technical specification Part 003: Tubes
    3/14/2024 - PDF - English - BSI
    Learn More
    €24.00

  • 24/30487395 DC:2024

    BS EN 4700-004 Aerospace series - Steel and heat-resisting alloys Wrought products Technical specification Part 004: Wires
    3/14/2024 - PDF - English - BSI
    Learn More
    €24.00

  • 24/30487398 DC:2024

    BS EN 4700-005 Aerospace series - Steel and heat-resisting alloys Wrought products Technical specification Part 005: Forging stocks
    3/14/2024 - PDF - English - BSI
    Learn More
    €24.00

  • 24/30487401 DC:2024

    BS EN 4700-006 Aerospace series - Steel and heat-resisting alloys Wrought products. Technical specification Part 006: Pre-production production forgings
    3/14/2024 - PDF - English - BSI
    Learn More
    €24.00

  • 24/30487404 DC:2024

    BS EN 4700-007 Aerospace series. Steel and heat-resisting alloys. Wrought products. Technical specification Part 007: Remelting stocks
    3/14/2024 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 2745B:2024-03-12

    Induction Hardening of Steel Parts
    3/12/2024 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5512N:2024-03-12

    Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (347) Solution Heat Treated
    3/12/2024 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5661H:2024-03-12

    Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
    3/12/2024 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 1431F:2024-03-12

    Solid Runway Deicing/Anti-icing Product
    3/12/2024 - PDF - English - SAE
    Learn More
    €101.00

  • SAE AMS 1435E:2024-03-12

    Liquid Runway Deicing/Anti-icing Product
    3/12/2024 - PDF - English - SAE
    Learn More
    €103.00

  • SAE AMS 5547J:2024-03-04

    Steel, Corrosion- and Heat-Resistant, Sheet and Strip 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated
    3/4/2024 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5692F:2024-03-04

    Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo
    3/4/2024 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 4123L:2024-03-04

    Aluminum Alloy, Rolled or Cold Finished Bars and Rods, (7075-T651), Solution and Precipitation Heat Treated
    3/4/2024 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 4934J:2024-03-04

    Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged
    3/4/2024 - PDF - English - SAE
    Learn More
    €70.00

  • DIN EN 4258:2024-03

    Aerospace series - Metallic materials - General organization of standardization - Link between types of European Standards and their use, German version ASD-STAN prEN 4258:2023
    3/1/2024 - PDF - German - DIN
    Learn More
    €72.80

  • SAE AMS 5649J:2024-03-01

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Stock for Forgings, 18Cr - 13Ni - 2.1Mo (316FM) Free Machining Solution Heat Treated
    3/1/2024 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5899D:2024-03-01

    Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Powder Metallurgy Product, Hot Isostatically Pressed
    3/1/2024 - PDF - English - SAE
    Learn More
    €70.00

  • DIN EN 4908:2024-03

    Aerospace series - Hexavalent chromium free chemical conversion process of magnesium and magnesium alloys, German version ASD-STAN prEN 4908:2023
    3/1/2024 - PDF - German - DIN
    Learn More
    €79.72

  • SAE AMS 4127L:2024-03-01

    Aluminum Alloy, Forgings and Rolled or Forged Rings, (6061-T6), Solution and Precipitation Heat Treated
    3/1/2024 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 4600B:2024-03-01

    Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Naturally Aged (2219 -T37)
    3/1/2024 - PDF - English - SAE
    Learn More
    €70.00

  • DIN EN 2955:2024-03

    Aerospace series - Recycling of titanium and titanium alloy scrap, English version prEN 2955:2024
    3/1/2024 - PDF - English - DIN
    Learn More
    €65.89

  • DIN EN 4800-005:2024-03

    Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock, English version prEN 4800-005:2023
    3/1/2024 - PDF - English - DIN
    Learn More
    €99.35

  • DIN EN 4800-004:2024-03

    Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire, English version prEN 4800-004:2023
    3/1/2024 - PDF - English - DIN
    Learn More
    €99.35

  • DIN EN 4800-001:2024-03

    Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip, English version prEN 4800-001:2023
    3/1/2024 - PDF - English - DIN
    Learn More
    €92.62

  • DIN EN 4800-002:2024-03

    Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section, English version prEN 4800-002:2023
    3/1/2024 - PDF - English - DIN
    Learn More
    €92.62

  • DIN EN 4800-003:2024-03

    Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube, English version prEN 4800-003:2023
    3/1/2024 - PDF - English - DIN
    Learn More
    €92.62

  • DIN EN 4800-007:2024-03

    Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock, English version prEN 4800-007:2023
    3/1/2024 - PDF - English - DIN
    Learn More
    €85.79

  • SAE AMS 2801D:2024-03-01

    Heat Treatment of Titanium Alloy Parts
    3/1/2024 - PDF - English - SAE
    Learn More
    €96.00

  • DIN EN 6042:2024-03

    Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy, German and English version EN 6042:2023
    3/1/2024 - PDF - English, German - DIN
    Learn More
    €99.35

  • SAE AMS 4406B:2024-02-27

    Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated (Stabilized: Feb 2024)
    2/27/2024 - PDF - English - SAE
    Learn More
    €79.00

  • SAE J 2392:2024-02-13

    Categorization and Properties of SAE Cold Rolled Strip Steels
    2/13/2024 - PDF - English - SAE
    Learn More
    €83.00

  • DIN EN 4881:2024-02

    Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys, German and English version EN 4881:2023
    2/1/2024 - PDF - English, German - DIN
    Learn More
    €92.62

  • PR NF EN 4800-001, L10-804-001PR (02/2024)

    Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 001 : Plaques, tôles et bandes
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €97.50

  • PR NF EN 4800-002, L10-804-002PR (02/2024)

    Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 002 : Barres et profilés
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €97.50

  • PR NF EN 4800-003, L10-804-003PR (02/2024)

    Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 003: Tubes
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €97.50

  • PR NF EN 4800-004, L10-804-004PR (02/2024)

    Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 004 : Fils
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €97.50

  • PR NF EN 4800-005, L10-804-005PR (02/2024)

    Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 005 : produits destinés à la forge
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €107.50

  • PR NF EN 4800-007, L10-804-007PR (02/2024)

    Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 007 : produits pour refusion
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €88.50

  • PR NF EN 2955, L10-805PR (02/2024)

    Série aérospatiale - Recyclage des chutes de titane et d'alliages de titane
    2/1/2024 - Paper - English, French - AFNOR
    Learn More
    €64.50

  • SAE AMS 4616H:2024-02-01

    Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved
    2/1/2024 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5506H:2024-01-22

    Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (420) Annealed
    1/22/2024 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5617L:2024-01-22

    Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
    1/22/2024 - PDF - English - SAE
    Learn More
    €83.00

  • SAE ARP 1341C:2024-01-22

    Determining Decarburization and Carburization in Finished Parts of Carbon and Low-Alloy Steels (Stabilized: Jan 2024)
    1/22/2024 - PDF - English - SAE
    Learn More
    €60.00

  • BS EN 3525:2023 + Redline

    Tracked Changes. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Plates. 6 mm = a = 20 mm. 1 080 MPa = Rm = 1 280 MPa
    1/22/2024 - PDF - English - BSI
    Learn More
    €197.00

  • BS EN 3526:2023 + Redline

    Tracked Changes. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheets and strips. 0,5 mm = a = 6 mm. 980 MPa = Rm = 1 180 MPa
    1/22/2024 - PDF - English - BSI
    Learn More
    €197.00

  • BS EN 3524:2023 + Redline

    Tracked Changes. Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheets and strips. 2 mm = a = 6 mm. 1 080 MPa = Rm = 1 280 MPa
    1/22/2024 - PDF - English - BSI
    Learn More
    €197.00

  • 24/30482351 DC:2024

    EN 2955 Aerospace series. Recycling of titanium and titanium alloy scrap
    1/18/2024 - PDF - English - BSI
    Learn More
    €24.00

  • BS EN 3311:2023 + Redline

    Tracked Changes. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bars for machining. D = 300 mm. 900 MPa = Rm = 1160 MPa
    1/17/2024 - PDF - English - BSI
    Learn More
    €197.00

  • SAE AMS 6532K:2024-01-16

    Steel, Bars and Forgings, and Forging Stock 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.23 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable
    1/16/2024 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 6539B:2024-01-16

    Steel Bars, Forgings, Mechanical Tubing and Forging Stock, 1.7Cr - 3.8Ni - 0.3Mo (0.32 - 0.38C), Aircraft-Quality
    1/16/2024 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 4094E:2024-01-16

    Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
    1/16/2024 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4100G:2024-01-16

    Aluminum Alloy, Alclad, Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated
    1/16/2024 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4341H:2024-01-16

    Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
    1/16/2024 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 3045G:2024-01-16

    Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-to-Use
    1/16/2024 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AS 4792C:2024-01-16

    Water Conditioning Agents for Aqueous Magnetic Particle Inspection
    1/16/2024 - PDF - English - SAE
    Learn More
    €54.00

  • BS EN 3525:2023

    Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Plates. 6 mm = a = 20 mm. 1 080 MPa = Rm = 1 280 MPa
    1/15/2024 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 3524:2023

    Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheets and strips. 2 mm = a = 6 mm. 1 080 MPa = Rm = 1 280 MPa
    1/12/2024 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 3526:2023

    Aerospace series. Steel 15CrMoV6 (1.7334). Air melted. Hardened and tempered. Sheets and strips. 0,5 mm = a = 6 mm. 980 MPa = Rm = 1 180 MPa
    1/12/2024 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 3311:2023

    Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bars for machining. D ? 300 mm. 900 MPa ? Rm ? 1 160 MPa
    1/12/2024 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 6042:2023

    Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
    1/12/2024 - PDF - English - BSI
    Learn More
    €250.00

  • SAE AMS 3044H:2024-01-05

    Magnetic Particles, Fluorescent Wet Method, Dry Powder
    1/5/2024 - PDF - English - SAE
    Learn More
    €75.00

  • DIN EN 4500-003:2024-01

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys, German version ASD-STAN prEN 4500-003:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 4500-001:2024-01

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules, German version ASD-STAN prEN 4500-001:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 4500-002:2024-01

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 002: Specific rules for aluminium, aluminium alloys and magnesium alloys, German version ASD-STAN prEN 4500-002:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €85.79

  • DIN EN 3487:2024-01

    Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D 250 mm - 500 MPa R<(Index)m> 700 MPa, German version ASD-STAN prEN 3487:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN 2821:2024-01

    Aerospace series - Steel X5CrNiCu15 5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Bars for machining - a or D 200 mm - R<(Index)m> 1310 MPa, German version ASD-STAN prEN 2821:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN 3488:2024-01

    Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Sheets and strips - a 6 mm - 500 MPa R<(Index)m> 700 MPa, German version ASD-STAN prEN 3488:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN 2467:2024-01

    Aerospace series - Steel X2CrNi18-9 (1.4307) - Air melted - Softened - Plates, sheets and strips - 0,4 mm a 20 mm - 520 MPa R<(Index)m> 670 MPa, German version ASD-STAN prEN 2467:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN 3361:2024-01

    Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets and strips - a 6 mm - 1070 MPa R<(Index)m> 1220 MPa, German version ASD-STAN prEN 3361:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €52.90

  • DIN EN 4500-005:2024-01

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels, German version ASD-STAN prEN 4500-005:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 4500-004:2024-01

    Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys, German version ASD-STAN prEN 4500-004:2023
    1/1/2024 - PDF - German - DIN
    Learn More
    €85.79

  • SAE AMS 6360R:2023-12-27

    Steel Mechanical Tubing, Seamless, 0.95Cr - 0.20Mo (0.28 - 0.33C) (4130), Aircraft Quality, Normalized and Tempered, or Stress Relieved
    12/27/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6459G:2023-12-26

    Steel, Welding Wire, 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C), Vacuum Melted, Environment Controlled Packaging
    12/26/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6471K:2023-12-26

    Steel, Nitriding, Bars, Forgings, Mechanical Tubing, and Stock for Forging, 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod), Premium Aircraft Quality, Consumable Electrode Vacuum Remelted
    12/26/2023 - PDF - English - SAE
    Learn More
    €79.00

  • NBN EN 3524:2023

    Série aérospatiale - Acier 15CrMoV6 (1.7334) - Élaboré à l'air - Trempé et revenu - Tôles et bandes - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 280 MPa
    12/21/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 3524:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 280 MPa
    12/21/2023 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN 3525:2023

    Série aérospatiale - Acier 15CrMoV6 (1.7334) - Élaboré à l'air - Trempé et revenu - Plaques - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa
    12/21/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 3525:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa
    12/21/2023 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN 3526:2023

    Série aérospatiale - Acier 15CrMoV6 (1.7334) - Élaboré à l'air - Trempé et revenu - Tôles et bandes - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 MPa
    12/21/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 3526:2023

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 MPa
    12/21/2023 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN 3524:2023

    Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) - Lufterschmolzen - Gehärtet und angelassen - Bleche und Bänder - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 280 MPa
    12/21/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 3525:2023

    Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) - Lufterschmolzen - Gehärtet und angelassen - Platten - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa
    12/21/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 3526:2023

    Luft- und Raumfahrt - Stahl 15CrMoV6 (1.7334) - Lufterschmolzen - Gehärtet und angelassen - Bleche und Bänder - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 MPa
    12/21/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 3311:2023

    Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Barres pour usinage - D = 300 mm - 900 MPa = Rm = 1 160 MPa
    12/21/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 3311:2023

    Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D = 300 mm - 900 MPa = Rm = 1 160 MPa
    12/21/2023 - PDF - English - NBN
    Learn More
    €58.00

  • NBN EN 3311:2023

    Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Stangen zum Zerspanen - D = 300 mm - 900 MPa = Rm = 1 160 MPa
    12/21/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 6042:2023

    Série aérospatiale - Composés organiques - Méthode d'essai - Analyse par spectroscopie infrarouge
    12/21/2023 - PDF - French - NBN
    Learn More
    €142.00

  • NBN EN 6042:2023

    Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy
    12/21/2023 - PDF - English - NBN
    Learn More
    €142.00

  • NBN EN 6042:2023

    Luft- und Raumfahrt - Organische Verbindungen - Prüfverfahren - Analyse durch lnfrarot-Spektroskopie
    12/21/2023 - PDF - German - NBN
    Learn More
    €142.00

  • SAE AMS 4256D:2023-12-20

    Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated
    12/20/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4413C:2023-12-20

    Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged
    12/20/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5618K:2023-12-15

    Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 17Cr - 0.52Mo (0.95 - 1.20C), (440C), Consumable Electrode Vacuum Melted
    12/15/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 4255E:2023-12-14

    Aluminum Alloy, Clad One Side Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet), As Fabricated
    12/14/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4326B:2023-12-14

    Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles, 1.0Mg - 0.80Si - 1.8Cu - 0.20Cr (2013 -T6511), Solution Heat Treated, Stress-Relieved by Stretching, and Aged
    12/14/2023 - PDF - English - SAE
    Learn More
    €60.00

  • 23/30482354 DC:2023

    Draft BS EN 4800-001 Aerospace series. Titanium and titanium alloys. Technical specification Part 001: Plate, sheet strip
    12/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • 23/30482357 DC:2023

    Draft BS EN 4800-002 Aerospace series. Titanium and titanium alloys. Technical specification Part 002: Bar section
    12/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • 23/30482360 DC:2023

    Draft BS EN 4800-003 Aerospace series.Titanium and titanium alloys. Technical specification Part 003: Tube
    12/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • 23/30482363 DC:2023

    Draft BS EN 4800-004 Aerospace series. Titanium and titanium alloys. Technical specification Part 004: Wire
    12/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • 23/30482366 DC:2023

    Draft BS EN 4800-005 Aerospace series. Titanium and titanium alloys. Technical specification Part 005: Forging stock
    12/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • 23/30482369 DC:2023

    Draft BS EN 4800-007 Aerospace series. Titanium and titanium alloys. Technical specification Part 007: Remelting stock
    12/14/2023 - PDF - English - BSI
    Learn More
    €24.00

  • SAE AMS 4149F:2023-12-13

    Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated
    12/13/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 4403B:2023-12-13

    Aluminum Alloy, Die Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged
    12/13/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 4337C:2023-12-13

    Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
    12/13/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4988E:2023-12-13

    Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated
    12/13/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 1424/2A:2023-12-13

    Deicing/Anti-Icing Fluid, Aircraft SAE Type I Non-Glycol Based
    12/13/2023 - PDF - English - SAE
    Learn More
    €39.00

  • SAE AMS 1551B:2023-12-13

    Cleaner, Turbine Engine Gas Path Aqueous Type (Stabilized: Dec 2023)
    12/13/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE AMS 4371C:2023-12-13

    Magnesium Alloy, Plate 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat Treated
    12/13/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5545H:2023-12-13

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B (Rene 41) Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
    12/13/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 5702F:2023-12-13

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
    12/13/2023 - PDF - English - SAE
    Learn More
    €79.00

  • NF EN 3524, L10-512 (12/2023)

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheet and strip - 2 mm
    12/1/2023 - Paper - French - AFNOR
    Learn More
    €43.50

  • NF EN 3525, L10-518 (12/2023)

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plate - 6 mm
    12/1/2023 - Paper - French - AFNOR
    Learn More
    €43.50

  • NF EN 3526, L10-513 (12/2023)

    Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm
    12/1/2023 - Paper - French - AFNOR
    Learn More
    €48.00

  • DIN EN 4842:2023-12

    Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D 250 mm - 1070 MPa R<(Index)m> 1200 MPa - Premium quality (pq), German and English version EN 4842:2023
    12/1/2023 - PDF - English, German - DIN
    Learn More
    €59.63

  • NF EN 3311, L10-809 (12/2023)

    Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Barres pour usinage - D inférieur ou égal à 300 mm - 900 MPa inférieur ou égal à Rm inférieur ou égal à 1 160 MPa
    12/1/2023 - Paper - French - AFNOR
    Learn More
    €43.50

  • NF EN 6042, L17-046 (12/2023)

    Série aérospatiale - Composés organiques - Méthode d'essai - Analyse par spectroscopie infrarouge
    12/1/2023 - Paper - French - AFNOR
    Learn More
    €86.67

  • SAE AMS 2223J:2023-12-01

    Tolerances Copper and Copper Alloy Seamless Tubing
    12/1/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE AMS 5877C:2023-12-01

    Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings, Rings or Heading 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05La - 0.20N (HS-556) Solution Heat Treated
    12/1/2023 - PDF - English - SAE
    Learn More
    €70.00

  • BS EN 4881:2023

    Aerospace series. Micro-arc oxidation of aluminium and aluminium alloys
    11/23/2023 - PDF - English - BSI
    Learn More
    €250.00

  • SAE AMS 4121K:2023-11-22

    Aluminum Alloy Bars, Rods, and Wire, Rolled, Drawn, or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6, -T651) Solution and Precipitation Heat Treated
    11/22/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 5674G:2023-11-20

    Steel, Corrosion- and Heat-Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
    11/20/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 5964A:2023-11-20

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted and Remelted (718+)
    11/20/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5682F:2023-11-20

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 78Ni - 20Cr (8020)
    11/20/2023 - PDF - English - SAE
    Learn More
    €66.00

  • NBN EN 4881:2023

    Série aérospatiale - Oxydation micro-arc de l'aluminium et des alliages d'aluminium
    11/16/2023 - PDF - French - NBN
    Learn More
    €121.00

  • NBN EN 4881:2023

    Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys
    11/16/2023 - PDF - English - NBN
    Learn More
    €121.00

  • NBN EN 4881:2023

    Luft- und Raumfahrt - Mikrolichtbogenoxidation von Aluminium und Aluminiumlegierungen
    11/16/2023 - PDF - German - NBN
    Learn More
    €121.00

  • SAE AMS 5732K:2023-11-15

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings, Rings, or Heading 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Remelted 1800 °F (982 °C) Solution and Precipitation Heat Treated
    11/15/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 6468G:2023-11-10

    Steel, Welding Wire, 1.0Cr - 10Ni - 3.8Co - 0.45Mo - 0.08V (0.14 - 0.17C), Vacuum Melted, Environment Controlled Packaging
    11/10/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6515C:2023-11-10

    Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings, 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al, Premium Aircraft Quality, Double Vacuum Melted, Annealed (Maraging 350)
    11/10/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 4026N:2023-11-10

    Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061, -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged
    11/10/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 4078L:2023-11-10

    Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075: (-T73 Sheet, -T7351 Plate), Solution Heat Treated and Overaged
    11/10/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4640J:2023-11-10

    Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)
    11/10/2023 - PDF - English - SAE
    Learn More
    €70.00

  • BS EN 3762:2022

    Aerospace series. Heat-resisting alloy X6NiCrTiMnMoV26-15 (1.4944). Softened and cold worked. Wire for forged fasteners. D ? 15 mm - 1 100 MPa ? Rm ? 1 300 MPa
    11/8/2023 - PDF - English - BSI
    Learn More
    €151.00

  • UNE-EN 3628:2023

    Aerospace series - Lockwire, drawn - Corrosion resisting steel (Endorsed by Asociación Española de Normalización in November of 2023.)
    11/5/2023 - PDF - English - AENOR
    Learn More
    €35.00

  • UNE-EN 2302:2023

    Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm >= 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a <= 3 mm (Endorsed by Asociación Española de Normalización in November of 2023.)
    11/5/2023 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN 4842:2023

    Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D <= 250 mm - 1 070 MPa <= Rm <= 1 200 MPa - Premium quality (pq) (Endorsed by Asociación Española de Normalización in November of 2023.)
    11/3/2023 - PDF - English - AENOR
    Learn More
    €46.00

  • PR NF EN ISO/ASTM 52941, E67-016PR (11/2023)

    Fabrication additive - Performance et fiabilité du système - Essais de réception pour machines de fusion laser sur lit de poudre pour les matériaux métalliques pour l'application aérospatiale
    11/1/2023 - Paper - English, French - AFNOR
    Learn More
    €74.00

  • DIN EN 3628:2023-11

    Aerospace series - Lockwire, drawn - Corrosion resisting steel, German and English version EN 3628:2023
    11/1/2023 - PDF - English, German - DIN
    Learn More
    €52.90

  • DIN EN 2302:2023-11

    Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - R<(Index)m> 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a 3 mm, German and English version EN 2302:2023
    11/1/2023 - PDF - English, German - DIN
    Learn More
    €59.63

  • NF EN 4881, L10-321 (11/2023)

    Série aérospatiale - Oxydation micro-arc de l'aluminium et des alliages d'aluminium
    11/1/2023 - Paper - French - AFNOR
    Learn More
    €75.50

  • PR NF EN 2559/A1, L17-422/A1PR (11/2023)

    Série aérospatiale - Préimprégnés de fibres de carbone, de verre et d'aramide - Détermination des teneurs en résine et en fibres et de la masse surfacique de la fibre
    11/1/2023 - Paper - English, French - AFNOR
    Learn More
    €35.50

  • BS EN 4842:2023 + Redline

    Tracked Changes. Aerospace series. Steel X5CrNiCu15-5 (1.4545). Consumable electrode remelted (ESR or VAR). Solution treated and precipitation treated (H1025). Bars for machining. a or D = 250 mm. 1 070 MPa = Rm = 1 200 MPa. Premium quality (pq)
    10/31/2023 - PDF - English - BSI
    Learn More
    €197.00

  • SAE AMS 5893D:2023-10-20

    Iron-Nickel Alloy, Bars, Forgings, and Rings and Stock for Rings, Forgings, and Heading 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion
    10/20/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 6294L:2023-10-20

    Steel Bars and Forgings and Forging Stock, Carburizing, Aircraft-Quality 1.8Ni - 0.25Mo (0.17 - 0.22C) (4620)
    10/20/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6322S:2023-10-20

    Steel Bars, Forgings, and Rings and Stock for Forging or Flash Welded Rings Aircraft-Quality 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (8740)
    10/20/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 6340D:2023-10-20

    Steel Bars, Forgings, Mechanical Tubing and Forging Stock 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Premium Aircraft Quality Consumable Electrode Vacuum Remelted
    10/20/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 6348F:2023-10-20

    Steel, Bars Aircraft Quality 0.95Cr - 0.20Mo (0.28 to 0.33C) (4130) Normalized
    10/20/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6382S:2023-10-20

    Steel, Bars, Forgings, Rings, and Stock for Forging or Flash Welded Rings Aircraft Quality 0.95Cr - 0.20Mo (0.38 - 0.43C) (4140) Annealed
    10/20/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 6427P:2023-10-20

    Steel Bars, Forgings, Mechanical Tubing, and Forging Stock, Aircraft Quality, 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod)
    10/20/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 4775L:2023-10-20

    Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus
    10/20/2023 - PDF - English - SAE
    Learn More
    €60.00

  • BS ISO 14624-3:2023 + Redline

    Tracked Changes. Space systems - Safety and compatibility of materials Part 3: Determination off-gassed compounds from assembled articles
    10/17/2023 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN 4842:2023

    Aerospace series. Steel X5CrNiCu15-5 (1.4545). Consumable electrode remelted (ESR or VAR). Solution treated and precipitation treated (H1025). Bars for machining. a or D = 250 mm. 1 070 MPa = Rm = 1 200 MPa. Premium quality (pq)
    10/17/2023 - PDF - English - BSI
    Learn More
    €151.00

  • SAE AMS 5027H:2023-10-16

    Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) Vacuum Melted, Environment-Controlled Packaging
    10/16/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5576M:2023-10-16

    Steel, Corrosion- and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated
    10/16/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5931B:2023-10-16

    Steel, Wear, Galling, and Corrosion-Resistant Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Rings, and Extruding 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated
    10/16/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6324L:2023-10-16

    Steel Bars, Forgings, Mechanical Tubing, and Forging Stock Aircraft-Quality 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (8740 Modified)
    10/16/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 6346D:2023-10-16

    Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Aircraft Quality Hardened and Tempered, 125 ksi (862 MPa) Tensile Strength
    10/16/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 4612L:2023-10-16

    Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)
    10/16/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 4776K:2023-10-16

    Nickel Alloy, Brazing Filler Metal, 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon), 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus Range
    10/16/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 5874D:2023-10-16

    Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N (HS-556) Solution Heat Treated
    10/16/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5876F:2023-10-16

    Cobalt Alloy, Corrosion- and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Remelted Solution Heat Treated and Cold Rolled
    10/16/2023 - PDF - English - SAE
    Learn More
    €75.00

  • BS ISO 14624-2:2023 + Redline

    Tracked Changes. Space systems - Safety and compatibility of materials Determination flammability electrical-wire insulation accessory
    10/13/2023 - PDF - English - BSI
    Learn More
    €326.00

  • BS ISO 14624-1:2023

    Space systems. Safety and compatibility of materials Determination upward flammability
    10/11/2023 - PDF - English - BSI
    Learn More
    €293.00

  • BS ISO 14624-2:2023

    Space systems. Safety and compatibility of materials Determination flammability electrical-wire insulation accessory
    10/11/2023 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 14624-3:2023

    Space systems. Safety and compatibility of materials Determination off-gassed compounds from assembled articles
    10/11/2023 - PDF - English - BSI
    Learn More
    €250.00

  • NBN EN 4842:2023

    Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable (ESR ou VAR) - Mis en solution et précipité (H1025) - Barres pour usinage - a ou D = 250 mm - 1 070 MPa = Rm = 1 200 MPa - Première qualité (pq)
    10/11/2023 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN 4842:2023

    Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode umgeschmolzen (ESR oder VAR) - Lösungsgeglüht und ausscheidungsgehärtet (H1025) - Stangen zur spanenden Bearbeitung - a oder D = 250 mm - 1 070 MPa = Rm = 1 200 MPa - Beste Güte (pq)
    10/11/2023 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN 4842:2023

    Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D = 250 mm - 1 070 MPa = Rm = 1 200 MPa - Premium quality (pq)
    10/11/2023 - PDF - English - NBN
    Learn More
    €58.00

  • SAE AMS 5838G:2023-10-06

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La (S)
    10/6/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5637K:2023-10-05

    Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength
    10/5/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 3216J:2023-10-05

    Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set / 70 to 80 Type A Hardness For Products in Fuel Systems and Specific Engine Oil Systems
    10/5/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 4777K:2023-10-05

    Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
    10/5/2023 - PDF - English - SAE
    Learn More
    €60.00

  • ASD-STAN prEN 4631 P3 COR 1:2023

    Aerospace series Steel X4CrNiMo16-5-1 (1.4418) — Air melted — Hardened and tempered — Bars — De ≤ 200 mm — 900 MPa ≤ Rm ≤ 1 050 MPa
    10/4/2023 - PDF - English - ASD-STAN
    Learn More
    €68.25

  • ASD-STAN prEN 4630 P3 COR 1:2023

    Aerospace series Steel X4CrNiMo16-5-1 (1.4418) — Air melted — Hardened and tempered — Forgings — De ≤ 200 mm — 900 MPa ≤ Rm ≤ 1 050 MPa
    10/3/2023 - PDF - English - ASD-STAN
    Learn More
    €68.25

  • SAE AMS 6270S:2023-10-02

    Steel, Bars, Forgings, and Mechanical Tubing and Forging Stock Aircraft Quality 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615)
    10/2/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6945D:2023-10-02

    Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed
    10/2/2023 - PDF - English - SAE
    Learn More
    €75.00

  • NF EN 4842, L11-207 (10/2023)

    Aerospace series - Steel X5CrNiCu15-5 (WL 1.4545) - Consumable electrode remelted (ESR or VAR) - Solution treated and precipitation treated (H1025) - Bars for machining - a or D = 250 mm - 1 070 MPa = Rm = 1 200 MPa - Premium quality (pq)
    10/1/2023 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF L17-106 (10/2023)

    Série aérospatiale - Matériaux caoutchouc normalisés NF L - Spécification technique
    10/1/2023 - Paper - French - AFNOR
    Learn More
    €75.67

  • SAE AMS 5654H:2023-09-28

    Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated
    9/28/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5800H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted and Remelted (Rene 41)
    9/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5801H:2023-09-28

    Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La (188)
    9/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5837H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (625)
    9/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5670H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Rings, Forgings, and Heading 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) 1800 °F (982 °C) Solution Heat-Treated, Precipitation-Hardenable
    9/28/2023 - PDF - English - SAE
    Learn More
    €70.00

  • BS EN 3628:2023

    Aerospace series. Lockwire, drawn. Corrosion resisting steel
    9/26/2023 - PDF - English - BSI
    Learn More
    €151.00

  • BS EN 2302:2023

    Aerospace series. Heat-resisting nickel base alloy NiCr20Co3Fe3. Rm = 650 MPa. Sheets and strips, cold rolled. 0,25 mm < a = 3 mm
    9/25/2023 - PDF - English - BSI
    Learn More
    €151.00

  • SAE AMS 6272P:2023-09-22

    Steel Bars, Forgings, and Mechanical Tubing Aircraft-Quality 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)
    9/22/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6429K:2023-09-22

    Steel Bars, Forgings, Mechanical Tubing, Rings and Stock for Forgings and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Premium Aircraft Quality Consumable Electrode Vacuum Remelted
    9/22/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 4056J:2023-09-21

    Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-O) Annealed
    9/21/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 4069G:2023-09-21

    Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg - 0.25Cr (5052-O) Annealed
    9/21/2023 - PDF - English - SAE
    Learn More
    €66.00

  • NBN EN 3628:2023

    Série aérospatiale - Fils à freiner étirés - Acier résistant à la corrosion
    9/20/2023 - PDF - French - NBN
    Learn More
    €58.00

Items 1 to 200 of 8596 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 43