23 : Fluid systems and components for general use
-
BS EN ISO 10297:2024
Gas cylinders. Cylinder valves. Specification and type testing
4/12/2024 - PDF - English -
Learn More€348.00 -
24/30488707 DC:2024
BS EN 13079 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
4/11/2024 - PDF - English -
Learn More€24.00 -
PAS 4443:2024
Assessment criteria: Ancillary valves, devices and components used in hydrogen gas installations. Specification
4/11/2024 - PDF - English -
Learn More€168.00 -
€24.00
-
BS EN ISO 4126-10:2024 + Redline
Tracked Changes. Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
4/10/2024 - PDF - English -
Learn More€492.00 -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
4/10/2024 - PDF - English -
Learn More€40.80 -
UNE-EN ISO 10468:2024
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
4/10/2024 - PDF - Spanish -
Learn More€63.00 -
BS EN 12201-3:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
4/10/2024 - PDF - English -
Learn More€432.00 -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
4/10/2024 - PDF - Spanish -
Learn More€34.00 -
UNE-EN ISO 10468:2024
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
4/10/2024 - PDF - English -
Learn More€75.60 -
BS EN ISO 4126-10:2024
Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
4/4/2024 - PDF - English -
Learn More€377.00 -
BS EN ISO 22435:2024
Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
4/4/2024 - PDF - English -
Learn More€293.00 -
€197.00
-
UNE-EN 12449:2024
Copper and copper alloys - Seamless, round tubes for general purposes
4/3/2024 - PDF - Spanish -
Learn More€95.00 -
UNE-EN ISO 5117:2024
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
4/3/2024 - PDF - Spanish -
Learn More€85.00 -
UNE-EN ISO 11623:2024
Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
4/3/2024 - PDF - English -
Learn More€111.60 -
UNE-EN 12449:2024
Copper and copper alloys - Seamless, round tubes for general purposes
4/3/2024 - PDF - English -
Learn More€114.00 -
UNE-EN ISO 5117:2024
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
4/3/2024 - PDF - English -
Learn More€102.00 -
BS ISO 10928:2024 + Redline
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
4/3/2024 - PDF - English -
Learn More€326.00 -
UNE-EN ISO 11623:2024
Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
4/3/2024 - PDF - Spanish -
Learn More€93.00 -
DIN CEN/TS 14632:2024-04
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity, German version CEN/TS 14632:2023
4/1/2024 - PDF - German -
Learn More€92.43 -
PR NF EN ISO 18984, T54-958PR (04/2024)
Robinets à tournant sphérique pour systèmes de canalisations en matières thermoplastiques pour installations d'eau chaude et froide sous pression - Types, dimensions et exigences
4/1/2024 - Paper - English, French -
Learn More€88.50 -
PR NF EN 14511-3/A1, E38-116-3/A1PR (04/2024)
Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entraîné par moteur électrique - Partie 3 : Méthodes d'essai
4/1/2024 - Paper - English, French -
Learn More€35.50 -
DIN 16262:2024-04
PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
4/1/2024 - PDF - German -
Learn More€39.35 -
DIN 21057-10:2024-04
Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
4/1/2024 - PDF - German -
Learn More€163.74 -
DIN EN ISO 7510:2024-04
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017), German version EN ISO 7510:2024
4/1/2024 - PDF - German -
Learn More€59.63 -
ASTM D2665-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
4/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A335/A335M-24 + Redline
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
4/1/2024 - PDF - English -
Learn More€79.00 -
ASTM F2618-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
4/1/2024 - PDF - English -
Learn More€71.00 -
DIN 3384-2:2024-04
Pipework - Part 2: Conformity assessment of connection for corrugated stainless steel metal hose assemblies according to DIN EN 16617 for combustible gases.
4/1/2024 - PDF - German -
Learn More€59.63 -
DIN EN 10378:2024-04
Welded stainless steel square and rectangular tubes for mechanical, engineering and decorative use - Technical delivery conditions, German and English version prEN 10378:2024
4/1/2024 - PDF - English, German -
Learn More€99.35 -
DIN 11864-2:2024-04
Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 2: Flange connections
4/1/2024 - PDF - German -
Learn More€110.00 -
ASTM F439-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English -
Learn More€60.00 -
ASTM D2241-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
4/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A333/A333M-24 + Redline
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
4/1/2024 - PDF - English -
Learn More€71.00 -
DIN EN 16904:2024-04
Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16904:2024
4/1/2024 - PDF - English, German -
Learn More€99.35 -
ASTM D2846/D2846M-24 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
4/1/2024 - PDF - English -
Learn More€79.00 -
DIN 16271:2024-04
PN 250 and PN 400 valves with test connection for pressure gauges
4/1/2024 - PDF - German -
Learn More€45.98 -
PR NF EN ISO 7866/A2, E29-743/A2PR (04/2024)
Bouteilles à gaz - Bouteilles à gaz sans soudure en alliage d'aluminium destinées à être rechargées - Conception, construction et essais - Amendement 2
4/1/2024 - Paper - English, French -
Learn More€45.00 -
DIN 35913:2024-04
Valves for drinking water installations in buildings - Level-controlled shut-off valves in drinking water installations - Requirements and tests
4/1/2024 - PDF - German -
Learn More€52.90 -
DIN 21057-11:2024-04
Pipe classes for process plants - Part 11: Technical delivery conditions for pipe components of austenitic stainless steels of material group 8.1
4/1/2024 - PDF - German -
Learn More€158.04 -
ASTM F437-24
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN 16903:2024-04
Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16903:2024
4/1/2024 - PDF - English, German -
Learn More€104.95 -
ASTM D2665-24 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
4/1/2024 - PDF - English -
Learn More€71.00 -
DIN EN ISO 11117:2024-04
Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019), German version EN ISO 11117:2019
4/1/2024 - PDF - German -
Learn More€85.79 -
DIN 4811-1:2024-04
Pressure regulators for LPG and safety devices - Part 1: Requirements.
4/1/2024 - PDF - German -
Learn More€120.84 -
PR NF EN 14511-2/A1, E38-116-2/A1PR (04/2024)
Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entraîné par moteur électrique - Partie 2 : Conditions d'essai
4/1/2024 - Paper - English, French -
Learn More€45.00 -
DIN EN ISO 10497:2024-04
Testing of valves - Fire type-testing requirements (ISO 10497:2022), German version EN ISO 10497:2022
4/1/2024 - PDF - German -
Learn More€92.62 -
ASTM F439-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English -
Learn More€71.00 -
ASTM D2241-24 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
4/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A335/A335M-24
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
4/1/2024 - PDF - English -
Learn More€66.00 -
ASTM F2618-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
4/1/2024 - PDF - English -
Learn More€60.00 -
DIN 3384-1:2024-04
Pipework - Part 1: Types of connection for corrugated stainless steel metal hose assemblies according to DIN EN 16617 for combustible gases.
4/1/2024 - PDF - German -
Learn More€79.72 -
DIN 4811-2:2024-04
Pressure regulators for LPG and safety devices - Part 2: Conformity assessement.
4/1/2024 - PDF - German -
Learn More€59.63 -
24/30483302 DC:2024
BS EN ISO 5801:2017/Amd 1 Fans - Performance testing using standardized airways. Amendment 1
4/1/2024 - PDF - English -
Learn More€24.00 -
ASTM F437-24 + Redline
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
4/1/2024 - PDF - English -
Learn More€71.00 -
DIN 21057-12:2024-04
Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
4/1/2024 - PDF - German -
Learn More€158.04 -
ASTM A333/A333M-24
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
4/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN 13079:2024-04
Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D, German and English version prEN 13079:2024
4/1/2024 - PDF - English, German -
Learn More€65.89 -
ASTM D2846/D2846M-24
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
4/1/2024 - PDF - English -
Learn More€66.00 -
DIN EN 17038-4:2024-04
Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units, German version EN 17038-4:2023
4/1/2024 - PDF - German -
Learn More€104.95 -
DIN 16270:2024-04
PN 250 and PN 400 valves without test connection for pressure gauges
4/1/2024 - PDF - German -
Learn More€45.98 -
24/30490581 DC:2024
BS EN IEC 60879 AMD 1 Comfort fans and regulators for household and similar purposes - Methods for measuring performance
3/29/2024 - PDF - English -
Learn More€24.00 -
24/30484766 DC:2024
BS EN 16903 Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
3/28/2024 - PDF - English -
Learn More€24.00 -
24/30488704 DC:2024
BS EN 16904 Plastics piping systems inside the building structure - Environmental product declarations. Product category rules complementary to EN 15804
3/28/2024 - PDF - English -
Learn More€24.00 -
UNE-EN 17821:2024
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
3/27/2024 - PDF - Spanish -
Learn More€70.00 -
UNE-EN 15001-2:2024
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
3/27/2024 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 17821:2024
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
3/27/2024 - PDF - English -
Learn More€84.00 -
UNE-EN 15001-2:2024
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
3/27/2024 - PDF - English -
Learn More€88.80 -
24/30457738 DC:2024
BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
3/25/2024 - PDF - English -
Learn More€24.00 -
PAS 8855:2024
Vaping products and vaping devices. Quality, safety and performance. Specification
3/25/2024 - PDF - English -
Learn More€119.00 -
BS EN 12201-2:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
3/22/2024 - PDF - English -
Learn More€382.00 -
BS ISO 10928:2024
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
3/22/2024 - PDF - English -
Learn More€250.00 -
BS EN 12201-1:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
3/22/2024 - PDF - English -
Learn More€382.00 -
BS ISO 16132:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
3/22/2024 - PDF - English -
Learn More€326.00 -
BS EN 12201-4:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
3/21/2024 - PDF - English -
Learn More€326.00 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - English -
Learn More€105.60 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - Spanish -
Learn More€88.00 -
24/30479027 DC:2024
BS ISO 13348 Fans - Tolerances, methods of conversion and technical data presentation
3/18/2024 - PDF - English -
Learn More€24.00 -
BS EN 1594:2024 + Redline
Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
3/15/2024 - PDF - English -
Learn More€492.00 -
€151.00
-
BS EN 12201-4:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
3/14/2024 - PDF - English -
Learn More€250.00 -
BS EN 12201-2:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
3/14/2024 - PDF - English -
Learn More€293.00 -
24/30443602 DC:2024
EN 1993-4-2 Eurocode 3. Design of steel structures. Part 4-2: Tanks
3/14/2024 - PDF - English -
Learn More€24.00 -
BS EN 12201-3:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
3/14/2024 - PDF - English -
Learn More€331.00 -
UNE-EN 12309-1:2024
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
3/13/2024 - PDF - Spanish -
Learn More€76.00 -
BS EN 17878-2:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for bonded plastic service pipes
3/13/2024 - PDF - English -
Learn More€180.00 -
UNE 62425:2024
Construction of double-walled bottoms (non-inspectable base). in vertical axle air tanks manufactured in situ of single-walled steel
3/13/2024 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 12309-1:2024
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
3/13/2024 - PDF - English -
Learn More€91.20 -
€58.00
-
BS EN 12201-1:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
3/13/2024 - PDF - English -
Learn More€293.00 -
NBN EN ISO 8233:2024
Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai (ISO 8233:2024)
3/13/2024 - PDF - French -
Learn More€58.00 -
BS EN 17878-3:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for non bonded plastic service pipes
3/13/2024 - PDF - English -
Learn More€180.00 -
NBN ISO 3601-2:2024
Fluid power systems — O-rings — Part 2: Housing dimensions for general applications ISO 3601-2:2016
3/12/2024 - PDF - English -
Learn More€184.00 -
BS ISO 16132:2024
Ductile iron pipes and fittings. Seal coats for cement mortar linings
3/12/2024 - PDF - English -
Learn More€250.00 -
NBN ISO 3601-4:2024
Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) ISO 3601-4:2008
3/12/2024 - PDF - English -
Learn More€89.00 -
NBN ISO 3601-2:2024
Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 2: Dimensions des logements pour applications générales ISO 3601-2:2016
3/12/2024 - PDF - French -
Learn More€184.00 -
BS EN 1594:2024
Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
3/11/2024 - PDF - English -
Learn More€377.00 -
BS EN 17878-1:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Classification, general requirements and test methods
3/8/2024 - PDF - English -
Learn More€250.00 -
24/30484769 DC:2024
BS EN 1705 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
3/7/2024 - PDF - English -
Learn More€24.00 -
24/30476059 DC:2024
BS EN ISO 21036 Plastics piping systems for industrial applications -Unplasticized Polyamide (PA-U) - Metric series for specifications for components and system
3/7/2024 - PDF - English -
Learn More€24.00 -
NBN EN 17878-3:2024
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 3 : Exigences et méthodes d'essai pour les systèmes non bloqués avec tubes de service en plastique
3/6/2024 - PDF - French -
Learn More€89.00 -
NBN EN 17878-1:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods
3/6/2024 - PDF - English -
Learn More€142.00 -
NBN EN 1594:2024
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
3/6/2024 - PDF - English -
Learn More€184.00 -
UNE-EN ISO 5774:2024
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
3/6/2024 - PDF - English -
Learn More€81.60 -
NBN EN 17878-3:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 3: Requirements and test methods for non bonded systems with plastic service pipes
3/6/2024 - PDF - English -
Learn More€89.00 -
NBN EN 17878-2:2024
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 2 : Exigences et méthodes d'essai pour les systèmes bloqués avec tubes de service en plastique
3/6/2024 - PDF - French -
Learn More€89.00 -
NBN EN 17878-2:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 2: Requirements and test methods for bonded systems with plastic service pipes
3/6/2024 - PDF - English -
Learn More€89.00 -
UNE-EN ISO 5774:2024
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
3/6/2024 - PDF - Spanish -
Learn More€68.00 -
NBN EN 1594:2024
Gasinfrastruktur - Rohrleitungen für einen maximal zulässigen Betriebsdruck über 16 bar - Funktionale Anforderungen
3/6/2024 - PDF - German -
Learn More€184.00 -
NBN EN 17878-1:2024
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 1 : Classification, exigences générales et méthodes d'essai
3/6/2024 - PDF - French -
Learn More€142.00 -
BS EN IEC 63086-2-1:2024
Household and similar electrical air cleaning appliances. Methods for measuring the performance Particular requirements determination of particle reduction
3/5/2024 - PDF - English -
Learn More€293.00 -
NF EN 17878-1, E39-021-1 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 1 : classification, exigences générales et méthodes d'essai
3/1/2024 - Paper - French -
Learn More€93.50 -
DIN EN 19:2024-03
Industrial valves - Marking of metallic valves, German version EN 19:2023
3/1/2024 - PDF - German -
Learn More€72.80 -
ASTM A358/A358M-24 + Redline
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
3/1/2024 - PDF - English -
Learn More€71.00 -
DIN CEN/TS 1329-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1329-2:2021
3/1/2024 - PDF - German -
Learn More€92.62 -
DIN EN 1705:2024-03
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow, German and English version prEN 1705:2024
3/1/2024 - PDF - English, German -
Learn More€59.63 -
ASTM A813/A813M-24
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
3/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A179/A179M-24
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
3/1/2024 - PDF - English -
Learn More€52.00 -
ASTM A350/A350M-24 + Redline
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A815/A815M-24
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
3/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A312/A312M-24 + Redline
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
3/1/2024 - PDF - English -
Learn More€79.00 -
ASTM A778/A778M-24 + Redline
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A53/A53M-24 + Redline
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
3/1/2024 - PDF - English -
Learn More€103.00 -
NF EN 17878-3, E39-021-3 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 3 : exigences et méthodes d'essai pour les systèmes non bloqués avec tubes de service en plastique
3/1/2024 - Paper - French -
Learn More€68.50 -
ASTM A249/A249M-24 + Redline
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
3/1/2024 - PDF - English -
Learn More€71.00 -
DIN CEN/TS 1566-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023.
3/1/2024 - PDF - German -
Learn More€68.60 -
DIN EN 13476-2:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A, German and English version prEN 13476-2:2024
3/1/2024 - PDF - English, German -
Learn More€131.96 -
ASTM A688/A688M-24
Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
3/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A270/A270M-24 + Redline
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A789/A789M-24
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN 16261:2024-03
PN 16 cocks with female/female and female/male connection for pressure gauges
3/1/2024 - PDF - German -
Learn More€39.35 -
€54.00
-
VG 95922-7:2024-03
Hose assemblies - Part 7: Hose assemblies for fluid power service, air conditioning section, detail standard, Text in German and English
3/1/2024 - PDF - English, German -
Learn More€110.00 -
ASTM A790/A790M-24
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN 3630:2024-03
Shut-off valves, check valves, air supply/exhaust valves and control valves made of metallic materials for potable water supply systems - Requirements and test methods
3/1/2024 - PDF - German -
Learn More€52.90 -
ASTM A409/A409M-24
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN 4726:2024-03
Warm water surface heating systems and radiator connections - Plastics and multilayer piping systems, Text in German and English
3/1/2024 - PDF - English, German -
Learn More€79.72 -
ASTM A813/A813M-24 + Redline
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A179/A179M-24 + Redline
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
3/1/2024 - PDF - English -
Learn More€63.00 -
ASTM A182/A182M-24
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
3/1/2024 - PDF - English -
Learn More€66.00 -
ASTM A815/A815M-24 + Redline
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A369/A369M-24
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN 12583/A1:2024-03
Gas Infrastructure - Compressor stations - Functional requirements, German and English version EN 12583:2022/prA1:2024
3/1/2024 - PDF - English, German -
Learn More€39.35 -
DIN CEN/TS 1455-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023.
3/1/2024 - PDF - German -
Learn More€68.60 -
NF EN 17878-2, E39-021-2 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 2 : exigences et méthodes d'essai pour les systèmes bloqués avec tubes de service en plastique
3/1/2024 - Paper - French -
Learn More€68.50 -
ASTM A358/A358M-24
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN 17670-2:2024-03
Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies, German version EN 17670-2:2023
3/1/2024 - PDF - German -
Learn More€126.26 -
DIN EN 13476-3:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B, German and English version prEN 13476-3:2024
3/1/2024 - PDF - English, German -
Learn More€131.96 -
ASTM A688/A688M-24 + Redline
Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A350/A350M-24
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
3/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A312/A312M-24
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
3/1/2024 - PDF - English -
Learn More€66.00 -
NF EN ISO 8233, T54-083 (03/2024)
Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai
3/1/2024 - Paper - French -
Learn More€43.50 -
ASTM A789/A789M-24 + Redline
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
3/1/2024 - PDF - English -
Learn More€71.00 -
DIN EN ISO 18984:2024-03
Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024), German and English version prEN ISO 18984:2024
3/1/2024 - PDF - English, German -
Learn More€92.62 -
ASTM A778/A778M-24
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN 13445-4:2024-03
Unfired pressure vessels - Part 4: Fabrication, German version EN 13445-4:2021+A1:2023
3/1/2024 - PDF - German -
Learn More€152.71 -
ASTM A53/A53M-24
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
3/1/2024 - PDF - English -
Learn More€86.00 -
PR NF ISO 7368, E48-430PR (03/2024)
Transmissions hydrauliques - Distributeurs à cartouche, à bride, à deux orifices - Logements
3/1/2024 - Paper - English, French -
Learn More€115.50 -
ASTM A790/A790M-24 + Redline
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
3/1/2024 - PDF - English -
Learn More€71.00 -
DIN EN 751-3:2024-03
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings, German version EN 751-3:2022+A1:2023.
3/1/2024 - PDF - German -
Learn More€85.79 -
ASTM A249/A249M-24
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
3/1/2024 - PDF - English -
Learn More€60.00 -
DIN EN 13476-1:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics, German and English version prEN 13476-1:2024
3/1/2024 - PDF - English, German -
Learn More€92.62 -
ASTM A409/A409M-24 + Redline
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM A270/A270M-24
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
3/1/2024 - PDF - English -
Learn More€60.00 -
ASTM A182/A182M-24 + Redline
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
3/1/2024 - PDF - English -
Learn More€79.00 -
DIN CEN/TS 13598-3:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity, German version CEN/TS 13598-3:2021.
3/1/2024 - PDF - German -
Learn More€88.04 -
ASTM A369/A369M-24 + Redline
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
3/1/2024 - PDF - English -
Learn More€71.00 -
ASTM C1924-24
Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
2/29/2024 - PDF - English -
Learn More€66.00 -
ASTM C1924-24 + Redline
Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
2/29/2024 - PDF - English -
Learn More€79.00 -
NBN ISO 16494-1:2022/Amd 1:2024
Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance — Amendment 1 ISO 16494-1:2022/Amd 1:2023
2/29/2024 - PDF - English -
Learn More€20.00 -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
2/28/2024 - PDF - Spanish -
Learn More€68.00 -
UNE-EN IEC 60335-2-40:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
2/28/2024 - PDF - Spanish -
Learn More€155.00 -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
2/28/2024 - PDF - English -
Learn More€81.60 -
UNE-EN IEC 60335-2-40:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
2/28/2024 - PDF - English -
Learn More€186.00 -
24/30457735 DC:2024
BS ISO 21013-2 Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
2/27/2024 - PDF - English -
Learn More€24.00 -
BS ISO 4437-3:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
2/26/2024 - PDF - English -
Learn More€382.00 -
BS ISO 4437-2:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
2/26/2024 - PDF - English -
Learn More€326.00 -
BS ISO 4437-5:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
2/26/2024 - PDF - English -
Learn More€326.00 -
PD CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
2/26/2024 - PDF - English -
Learn More€348.00 -
BS EN ISO 7510:2024
Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
2/22/2024 - PDF - English -
Learn More€151.00 -
CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation
2/21/2024 - PDF - English -
Learn More€184.00 -
UNE-EN 549:2020+A1:2024
Rubber materials for seals and diaphragms for gas appliances and gas equipment
2/21/2024 - PDF - Spanish -
Learn More€74.00 -
BS ISO 4437-5:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
2/21/2024 - PDF - English -
Learn More€250.00 -
BS ISO 4437-2:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
2/21/2024 - PDF - English -
Learn More€250.00 -
UNE-EN 549:2020+A1:2024
Rubber materials for seals and diaphragms for gas appliances and gas equipment
2/21/2024 - PDF - English -
Learn More€88.80 -
BS ISO 4437-3:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
2/21/2024 - PDF - English -
Learn More€293.00 -
€105.00
-
ASTM F894-24 + Redline
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
2/15/2024 - PDF - English -
Learn More€79.00 -
24/30481216 DC:2024
BS EN 13476-3 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 3: Specifications pipes fittings with smooth internal profiled external surface the system, Type B
2/15/2024 - PDF - English -
Learn More€24.00 -
24/30481210 DC:2024
BS EN 13476-1 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 1: General requirements performance characteristics
2/15/2024 - PDF - English -
Learn More€24.00 -
ASTM F894-24
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
2/15/2024 - PDF - English -
Learn More€66.00 -
24/30481213 DC:2024
BS EN 13476-2 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2: Specifications pipes fittings with smooth internal external surface the system, Type A
2/15/2024 - PDF - English -
Learn More€24.00 -
BS EN 12201-5:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
2/14/2024 - PDF - English -
Learn More€235.00 -
BS ISO 4179:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
2/13/2024 - PDF - English -
Learn More€382.00 -
€348.00
-
24/30434673 DC:2024
BS ISO 18553 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
2/12/2024 - PDF - English -
Learn More€24.00 -
BS ISO 10302-1:2024 + Redline
Tracked Changes. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne measurement
2/9/2024 - PDF - English -
Learn More€432.00 -
BS EN 12201-5:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
2/7/2024 - PDF - English -
Learn More€180.00 -
NBN EN ISO 7510:2024
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
2/7/2024 - PDF - English -
Learn More€89.00