21.120 : Shafts and couplings

Items 1 to 200 of 297 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • PR NF E22-621, E22-621PR (01/2024)

    Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
    1/1/2024 - Paper - French - AFNOR
    Learn More
    €88.50

  • DIN ISO 21940-21:2023-10

    Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2022), Text in German and English
    10/1/2023 - PDF - English, German - DIN
    Learn More
    €163.74

  • DIN 32711-1:2023-09

    Shaft-hub-connection - Polygon profile P3G - Part 1: Generalities and geometry
    9/1/2023 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 32711-2:2023-09

    Shaft-hub-connection - Polygon profile P3G - Part 2: Calculation and dimensioning
    9/1/2023 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 743 Beiblatt 1:2023-09

    Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
    9/1/2023 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 743-3:2023-09

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials
    9/1/2023 - PDF - German - DIN
    Learn More
    €45.98

  • NBN ISO 21940-21:2023

    Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines ISO 21940-21:2022
    4/12/2023 - PDF - English - NBN
    Learn More
    €184.00

  • DIN ISO 21940-11:2023-04

    Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour (ISO 21940-11:2016 + Amd 1:2022)
    4/1/2023 - PDF - German - DIN
    Learn More
    €110.00

  • DIN ISO 21940-14:2023-04

    Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012 + Amd 1:2022)
    4/1/2023 - PDF - German - DIN
    Learn More
    €85.79

  • NBN ISO 21940-11:2016/A1:2023

    Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour — Amendment 1 ISO 21940-11:2016/Amd 1:2022
    2/6/2023 - PDF - English - NBN
    Learn More
    €20.00

  • BS ISO 21940-21:2022 + Redline

    Tracked Changes. Mechanical vibration. Rotor balancing Description and evaluation of machines
    1/20/2023 - PDF - English - BSI
    Learn More
    €492.00

  • NF ISO 20816-3, E90-780-3 (01/2023)

    Vibrations mécaniques - Mesurage et évaluation des vibrations de machines - Partie 3 : Machines industrielles avec une puissance nominale supérieure à 15 kW et une vitesse de fonctionnement comprise entre 120 r/min et 30 000 r/min
    1/1/2023 - Paper - French - AFNOR
    Learn More
    €86.67

  • BS ISO 21940-21:2022

    Mechanical vibration. Rotor balancing Description and evaluation of machines
    11/30/2022 - PDF - English - BSI
    Learn More
    €377.00

  • NF E22-057-4 (11/2022)

    Transmissions mécaniques - Calcul de la capacité des arbres et axes - Partie 4 : Cumul de dommage, fatigue oligocyclique, endurance limitée et endurance
    11/1/2022 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF E22-057-1 (11/2022)

    Transmissions mécaniques - Calcul de la capacité des arbres et axes - Partie 1 : Généralités
    11/1/2022 - Paper - French - AFNOR
    Learn More
    €75.67

  • NF E22-621 (10/2022)

    Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
    10/1/2022 - Paper - French - AFNOR
    Learn More
    €119.00

  • BS ISO 21940-14:2012+A1:2022

    Mechanical vibration. Rotor balancing Procedures for assessing balance errors
    8/3/2022 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 21940-11:2016+A1:2022

    Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with rigid behaviour
    6/24/2022 - PDF - English - BSI
    Learn More
    €293.00

  • DIN 6888:2022-03

    Drive type fastenings without taper action - Woodruff keys - Dimensions and application
    3/1/2022 - PDF - German - DIN
    Learn More
    €52.90

  • PR NF EN 13001-3-8, E52-013-3-8PR (02/2022)

    Appareils de levage à charge suspendue - Conception générale - Partie 3-8 : états limites et vérification d'aptitude des éléments de mécanismes - Arbres
    2/1/2022 - Paper - English, French - AFNOR
    Learn More
    €153.50

  • DIN EN 13001-3-8:2022-02

    Cranes - General design - Part 3-8: Limit states and proof competence of machinery – Shafts, German and English version prEN 13001-3-8:2021
    2/1/2022 - PDF - English, German - DIN
    Learn More
    €163.74

  • 21/30437147 DC:2021

    BS EN 13001-3-8. Cranes. General design. Limit states and proof competence of machinery Part 3-8. Shafts
    12/16/2021 - PDF - English - BSI
    Learn More
    €24.00

  • DIN 3689-1:2021-11

    Shaft to collar connection - Hypotrochoidal H-profiles - Part 1: Geometry and dimensions
    11/1/2021 - PDF - German - DIN
    Learn More
    €120.84

  • DIN 6885-1:2021-11

    Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1: Dimensions, tolerances, mass
    11/1/2021 - PDF - German - DIN
    Learn More
    €72.80

  • NF ISO 4156-1, E22-144-1 (10/2021)

    Straight cylindrical involute splines - Metric module, side fit - Part 1 : Generalities
    10/1/2021 - Paper - French - AFNOR
    Learn More
    €144.67

  • NF ISO 4156-2, E22-144-2 (10/2021)

    Straight cylindrical involute splines - Metric module, side fit - Part 2 : Dimensions
    10/1/2021 - Paper - French - AFNOR
    Learn More
    €302.50

  • NF ISO 4156-3, E22-144-3 (10/2021)

    Straight cylindrical involute splines - Metric module, side fit - Part 3 : Inspection
    10/1/2021 - Paper - French - AFNOR
    Learn More
    €119.00

  • UNE-EN IEC 60372:2021

    Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
    7/28/2021 - PDF - Spanish - AENOR
    Learn More
    €74.00

  • UNE-EN IEC 60372:2021

    Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
    7/28/2021 - PDF - English - AENOR
    Learn More
    €88.80

  • NBN ISO 21940-1:2021

    Mechanical vibration — Rotor balancing — Part 1: Introduction ISO 21940-1:2019
    6/8/2021 - PDF - English - NBN
    Learn More
    €142.00

  • NBN ISO 21940-11:2021

    Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour ISO 21940-11:2016
    6/8/2021 - PDF - English - NBN
    Learn More
    €142.00

  • NBN ISO 21940-12:2021

    Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour ISO 21940-12:2016
    6/8/2021 - PDF - English - NBN
    Learn More
    €142.00

  • NBN ISO 21940-2:2021

    Mechanical vibration — Rotor balancing — Part 2: Vocabulary ISO 21940-2:2017
    6/8/2021 - PDF - English - NBN
    Learn More
    €37.00

  • DIN 983:2021-06

    Retaining rings with lugs for shafts (internal circlips)
    6/1/2021 - PDF - German - DIN
    Learn More
    €72.80

  • DIN 6885-2:2021-06

    Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass
    6/1/2021 - PDF - German - DIN
    Learn More
    €65.89

  • DIN 6885-3:2021-06

    Drive type fastenings without taper action, parallel keys, keyways - Low pattern - Part 3: Dimensions, tolerances, mass
    6/1/2021 - PDF - German - DIN
    Learn More
    €59.63

  • DIN ISO 16084:2021-06

    Balancing of rotating tools and tool systems (ISO 16084:2017)
    6/1/2021 - PDF - German - DIN
    Learn More
    €163.74

  • BS ISO 4156-2:2021

    Straight cylindrical involute splines. Metric module, side fit Dimensions
    2/9/2021 - PDF - English - BSI
    Learn More
    €449.00

  • BS ISO 4156-1:2021 + Redline

    Tracked Changes. Straight cylindrical involute splines. Metric module, side fit Generalities
    2/9/2021 - PDF - English - BSI
    Learn More
    €492.00

  • BS ISO 4156-1:2021

    Straight cylindrical involute splines. Metric module, side fit Generalities
    2/3/2021 - PDF - English - BSI
    Learn More
    €377.00

  • BS ISO 4156-3:2021

    Straight cylindrical involute splines. Metric module, side fit Inspection
    2/3/2021 - PDF - English - BSI
    Learn More
    €348.00

  • DIN ISO 21940-21 Beiblatt 1:2020-11

    Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines, Supplement 1: Statistical quality capability parameters for assessment of the unbalance measuring process
    11/1/2020 - PDF - German - DIN
    Learn More
    €92.62

  • BS ISO 21940-12:2016 + Redline

    Tracked Changes. Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with flexible behaviour
    2/25/2020 - PDF - English - BSI
    Learn More
    €432.00

  • BS ISO 21940-2:2017 + Redline

    Tracked Changes. Mechanical vibration. Rotor balancing Vocabulary
    2/25/2020 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN ISO 6413:2018 + Redline

    Tracked Changes. Technical product documentation. Representation of splines and serrations
    2/24/2020 - PDF - English - BSI
    Learn More
    €235.00

  • BS ISO 21940-1:2019 + Redline

    Tracked Changes. Mechanical vibration. Rotor balancing Introduction
    2/24/2020 - PDF - English - BSI
    Learn More
    €382.00

  • DIN ISO 21940-1:2019-07

    Mechanical vibration - Rotor balancing - Part 1: Introduction (ISO 21940-1:2019)
    7/1/2019 - PDF - German - DIN
    Learn More
    €104.95

  • SAE AS 7413A:2019-04-23

    Coupling Assemblies, Quick Disconnect, Automatic Shutoff (Stabilized: Apr 2019)
    4/23/2019 - PDF - English - SAE
    Learn More
    €101.00

  • DIN 5481:2019-04 + Redline

    Serration splines
    4/1/2019 - PDF - German - DIN
    Learn More
    €125.98

  • DIN 5481:2019-04

    Serration splines
    4/1/2019 - PDF - English - DIN
    Learn More
    €131.40

  • DIN 5481:2019-04

    Serration splines
    4/1/2019 - PDF - German - DIN
    Learn More
    €104.95

  • DIN 3760 Berichtigung 1:2019-04

    Rotary shaft lip type seals, Corrigendum 1
    4/1/2019 - PDF - German - DIN
    Learn More
    €0.00

  • BS ISO 21940-1:2019

    Mechanical vibration. Rotor balancing Introduction
    2/21/2019 - PDF - English - BSI
    Learn More
    €293.00

  • ISO 21940-1:2019

    Mechanical vibration
    Rotor balancing
    2/19/2019 - Paper - English - ISO
    Learn More
    €174.00

  • DIN EN ISO 6413:2018-12

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018), German version EN ISO 6413:2018
    12/1/2018 - PDF - German - DIN
    Learn More
    €72.80

  • UNE-EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018) (Endorsed by Asociación Española de Normalización in December of 2018.)
    12/1/2018 - PDF - English - AENOR
    Learn More
    €66.00

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    11/27/2018 - PDF - French - NBN
    Learn More
    €58.00

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    11/27/2018 - PDF - German - NBN
    Learn More
    €58.00

  • NBN EN ISO 6413:2018

    Technical product documentation - Representation of splines and serrations (ISO 6413:2018)
    11/27/2018 - PDF - English - NBN
    Learn More
    €58.00

  • BS EN ISO 6413:2018

    Technical product documentation. Representation of splines and serrations
    10/30/2018 - PDF - English - BSI
    Learn More
    €180.00

  • NF EN ISO 6413, E04-119 (10/2018)

    Technical product documentation - Representation of splines and serrations - Dessins techniques - Représentation des cannelures et des dentelures
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €60.67

  • 18/30360270 DC:2018

    BS EN 13001-3-8. Cranes. General design Part 3-8. Limit states and proof competence of machinery. Shafts
    6/1/2018 - PDF - English - BSI
    Learn More
    €24.00

  • IEC 60744:2018

    IEC 60744:2018 Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods
    5/14/2018 - PDF - English, French - IEC
    Learn More
    €270.00

  • NF ISO 16084, E66-271 (01/2018)

    Balancing of rotating tools and tool systems
    1/1/2018 - Paper - French - AFNOR
    Learn More
    €135.26

  • BS ISO 16084:2017

    Balancing of rotating tools and tool systems
    11/21/2017 - PDF - English - BSI
    Learn More
    €377.00

  • ISO 16084:2017 (R2023)

    Balancing of rotating tools and tool systems
    General information
    10/25/2017 - Paper - French - ISO
    Learn More
    €223.00

  • ISO 16084:2017 (R2023)

    Balancing of rotating tools and tool systems
    General information
    10/25/2017 - Paper - English - ISO
    Learn More
    €223.00

  • DIN ISO 21940-2:2017-09

    Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017)
    9/1/2017 - PDF - English - DIN
    Learn More
    €124.21

  • DIN ISO 21940-2:2017-09

    Mechanical vibration - Rotor balancing - Part 2: Vocabulary (ISO 21940-2:2017)
    9/1/2017 - PDF - German - DIN
    Learn More
    €99.35

  • BS ISO 21940-2:2017

    Mechanical vibration. Rotor balancing Vocabulary
    6/28/2017 - PDF - English - BSI
    Learn More
    €250.00

  • DIN 6799:2017-06

    Retaining washers for shafts
    6/1/2017 - PDF - English - DIN
    Learn More
    €66.07

  • DIN 6799:2017-06

    Retaining washers for shafts
    6/1/2017 - PDF - German - DIN
    Learn More
    €52.90

  • SAE ARP 4050A:2022-04-14

    Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
    2/7/2017 - PDF - English - SAE
    Learn More
    €116.00

  • DIN 7190-1:2017-02

    Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
    2/1/2017 - PDF - English - DIN
    Learn More
    €144.02

  • DIN 7190-1:2017-02

    Interference fits - Part 1: Calculation and design rules for cylindrical self-locking pressfits
    2/1/2017 - PDF - German - DIN
    Learn More
    €115.33

  • DIN 7190-2:2017-02

    Interference fits - Part 2: Calculation and design rules for conical self-locking pressfits
    2/1/2017 - PDF - German - DIN
    Learn More
    €99.35

  • 16/30256643 DC:2016

    BS EN 60744. Nuclear power plants. Instrumentation and control systems important to safety. Safety logic assemblies used in systems performing category A functions. Characteristics and test methods
    11/22/2016 - PDF - English - BSI
    Learn More
    €24.00

  • ISO 21940-11:2016 (R2021)

    Mechanical vibration
    Rotor balancing
    11/9/2016 - Paper - English - ISO
    Learn More
    €174.00

  • DIN ISO 21940-12:2016-09

    Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
    9/1/2016 - PDF - German - DIN
    Learn More
    €115.33

  • DIN ISO 21940-12:2016-09

    Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
    9/1/2016 - PDF - English - DIN
    Learn More
    €144.02

  • SAE ARP 5435A:2023-05-19

    APU Gas Turbine Engine Test Cell Correlation
    8/31/2016 - PDF - English - SAE
    Learn More
    €109.00

  • SAE ARP 4163:2021-08-12

    Balancing Machines: Tooling Design Criteria
    5/20/2016 - PDF - English - SAE
    Learn More
    €138.00

  • BS ISO 21940-12:2016

    Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with flexible behaviour
    4/30/2016 - PDF - English - BSI
    Learn More
    €331.00

  • ISO 21940-12:2016 (R2021)

    Mechanical vibration
    Rotor balancing
    3/29/2016 - Paper - English - ISO
    Learn More
    €174.00

  • DIN ISO 21940-12 Beiblatt 1:2015-04

    Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour - Supplement 1: Procedure for balancing at multiple rotational speeds
    4/1/2015 - PDF - German - DIN
    Learn More
    €201.96

  • DIN 5480-2:2015-03

    Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
    3/1/2015 - PDF - German - DIN
    Learn More
    €115.33

  • DIN 5480-2:2015-03

    Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
    3/1/2015 - PDF - English - DIN
    Learn More
    €144.02

  • ASTM A503/A503M-15(2020)

    Standard Specification for Ultrasonic Examination of Forged Crankshafts
    1/1/2015 - PDF - English - ASTM
    Learn More
    €48.00

  • ASTM A503/A503M-15(2020) + Redline

    Standard Specification for Ultrasonic Examination of Forged Crankshafts
    1/1/2015 - PDF - English - ASTM
    Learn More
    €57.00

  • DIN 743-3 Berichtigung 1:2014-12

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials, Corrigendum to DIN 743-3:2012-12
    12/1/2014 - PDF - German - DIN
    Learn More
    €0.00

  • DIN 743-3 Berichtigung 1:2014-12

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials, Corrigendum to DIN 743-3:2012-12
    12/1/2014 - PDF - English - DIN
    Learn More
    €0.00

  • SAE J 499:2014-06-05

    Parallel Side Splines for Soft Broached Holes in Fittings (Stabilized: Jun 2014)
    6/5/2014 - PDF - English - SAE
    Learn More
    €60.00

  • SAE J 501:2014-06-05

    Shaft Ends (Stabilized: Jun 2014)
    6/5/2014 - PDF - English - SAE
    Learn More
    €70.00

  • DIN 6892 Berichtigung 1:2014-05

    Drive type fastenings without taper action - Parallel keys - Calculation and design, Corrigendum to DIN 6892:2012-08
    5/1/2014 - PDF - German - DIN
    Learn More
    €0.00

  • DIN ISO 21940-21:2013-09

    Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
    9/1/2013 - PDF - German - DIN
    Learn More
    €131.96

  • DIN ISO 21940-21:2013-09

    Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
    9/1/2013 - PDF - English - DIN
    Learn More
    €164.95

  • BS ISO 21940-31:2013

    Mechanical vibration. Rotor balancing Susceptibility and sensitivity of machines to unbalance
    8/31/2013 - PDF - English - BSI
    Learn More
    €250.00

  • ISO 21940-31:2013 (R2019)

    Mechanical vibration
    Rotor balancing
    8/7/2013 - Paper - English - ISO
    Learn More
    €148.00

  • FD E22-057-3 (03/2013)

    Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 3 : examples - Transmissions mécaniques
    3/1/2013 - Paper - French - AFNOR
    Learn More
    €75.67

  • SAE ARP 587C:2012-12-17

    Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors (Stabilized: Dec 2012)
    12/17/2012 - PDF - English - SAE
    Learn More
    €132.00

  • DIN 743-1:2012-12

    Calculation of load capacity of shafts and axles - Part 1: General
    12/1/2012 - PDF - German - DIN
    Learn More
    €85.79

  • DIN 743-1:2012-12

    Calculation of load capacity of shafts and axles - Part 1: General
    12/1/2012 - PDF - English - DIN
    Learn More
    €107.48

  • DIN 743-2:2012-12

    Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors
    12/1/2012 - PDF - German - DIN
    Learn More
    €99.35

  • DIN 743-2:2012-12

    Calculation of load capacity of shafts and axles - Part 2: Theoretical stress concentration factors and fatigue notch factors
    12/1/2012 - PDF - English - DIN
    Learn More
    €124.21

  • DIN 743-3:2012-12

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials
    12/1/2012 - PDF - German - DIN
    Learn More
    €39.35

  • DIN 743-3:2012-12

    Calculation of load capacity of shafts and axles - Part 3: Strength of materials
    12/1/2012 - PDF - English - DIN
    Learn More
    €49.16

  • DIN 743-4:2012-12

    Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
    12/1/2012 - PDF - German - DIN
    Learn More
    €52.90

  • DIN 743-4:2012-12

    Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
    12/1/2012 - PDF - English - DIN
    Learn More
    €66.07

  • DIN 743 Beiblatt 1:2012-12

    Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
    12/1/2012 - PDF - German - DIN
    Learn More
    €72.80

  • DIN 743 Beiblatt 1:2012-12

    Calculation of load capacity of shafts and axles - Supplement 1: Examples to part 1 to 3
    12/1/2012 - PDF - English - DIN
    Learn More
    €91.12

  • DIN 743 Beiblatt 2:2012-12

    Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4
    12/1/2012 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 743 Beiblatt 2:2012-12

    Calculation of load capacity of shafts and axles - Supplement 2: Examples to part 4
    12/1/2012 - PDF - English - DIN
    Learn More
    €57.57

  • DIN ISO 21940-23:2012-09

    Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
    9/1/2012 - PDF - German - DIN
    Learn More
    €92.62

  • DIN ISO 21940-23:2012-09

    Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
    9/1/2012 - PDF - English - DIN
    Learn More
    €115.98

  • DIN 6892:2012-08

    Drive type fastenings without taper action - Parallel keys - Calculation and design
    8/1/2012 - PDF - German - DIN
    Learn More
    €115.33

  • DIN ISO 21940-13:2012-08

    Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
    8/1/2012 - PDF - English - DIN
    Learn More
    €115.98

  • DIN ISO 21940-32:2012-08

    Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
    8/1/2012 - PDF - German - DIN
    Learn More
    €79.72

  • DIN ISO 21940-32:2012-08

    Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
    8/1/2012 - PDF - English - DIN
    Learn More
    €99.44

  • DIN ISO 21940-13:2012-08

    Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
    8/1/2012 - PDF - German - DIN
    Learn More
    €92.62

  • BS ISO 21940-23:2012

    Mechanical vibration. Rotor balancing Enclosures and other protective measures for the measuring station of machines
    6/30/2012 - PDF - English - BSI
    Learn More
    €293.00

  • ISO 21940-14:2012 (R2017)

    Mechanical vibration
    Rotor balancing
    6/21/2012 - Paper - English - ISO
    Learn More
    €110.00

  • ISO 21940-23:2012 (R2023)

    Mechanical vibration
    Rotor balancing
    5/21/2012 - Paper - English - ISO
    Learn More
    €148.00

  • BS ISO 21940-32:2012

    Mechanical vibration. Rotor balancing Shaft and fitment key convention
    4/30/2012 - PDF - English - BSI
    Learn More
    €250.00

  • BS ISO 21940-13:2012

    Mechanical vibration. Rotor balancing Criteria and safeguards for the insitu of medium large rotors
    4/30/2012 - PDF - English - BSI
    Learn More
    €293.00

  • ISO 21940-32:2012 (R2023)

    Mechanical vibration
    Rotor balancing
    3/16/2012 - Paper - French - ISO
    Learn More
    €110.00

  • ISO 21940-13:2012 (R2023)

    Mechanical vibration
    Rotor balancing
    3/16/2012 - Paper - English - ISO
    Learn More
    €148.00

  • ISO 21940-32:2012 (R2023)

    Mechanical vibration
    Rotor balancing
    3/16/2012 - Paper - English - ISO
    Learn More
    €110.00

  • DIN 32712-2:2012-03

    Shaft to collar connection - Polygon profile P4C - Part 2: Calculation and dimensioning
    3/1/2012 - PDF - German - DIN
    Learn More
    €39.35

  • NF E22-057-2 (03/2012)

    Mechanical transmissions - Shafts and axles, calculation of load capacity - Part 2 : influence factors - Transmissions mécaniques
    3/1/2012 - Paper - French - AFNOR
    Learn More
    €75.67

  • SAE ARP 4048:2020-05-13

    BALANCING MACHINES - DESCRIPTION AND EVALUATION HORIZONTAL, TWO-PLANE, HARD-BEARING TYPE FOR GAS TURBINE ROTORS
    7/19/2011 - PDF - English - SAE
    Learn More
    €114.00

  • DIN 471:2011-04

    Retaining rings for shafts - Normal type and heavy type
    4/1/2011 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 471:2011-04

    Retaining rings for shafts - Normal type and heavy type
    4/1/2011 - PDF - English - DIN
    Learn More
    €99.44

  • NF ISO 14694/A1, E51-004/A1 (03/2011)

    Industrial fans - Specifications for balance quality and vibration levels - Amendment 1 - Ventilateurs industriels
    3/1/2011 - Paper - French - AFNOR
    Learn More
    €25.50

  • ISO 14694:2003/Amd 1:2010

    Industrial fans
    Specifications for balance quality and vibration levels
    10/28/2010 - Paper - English - ISO
    Learn More
    €21.00

  • ISO 14694:2003/Amd 1:2010

    Industrial fans
    Specifications for balance quality and vibration levels
    10/28/2010 - Paper - French - ISO
    Learn More
    €21.00

  • ASME B89.3.4-2010 (R2019)

    Axes of Rotation: Methods for Specifying and Testing
    5/12/2010 - Papier - English - ASME
    Learn More
    €78.00

  • DIN 5464:2010-03

    Straight-sided splines - Heavy series
    3/1/2010 - PDF - German - DIN
    Learn More
    €45.98

  • DIN 5464:2010-03

    Straight-sided splines - Heavy series
    3/1/2010 - PDF - English - DIN
    Learn More
    €57.57

  • JIS B 8277/ERRATUM 1:2010

    ERRATUM
    2/9/2010 - PDF - Japanese - JSA
    Learn More
    €0.00

  • ASME B89.3.4-2010 (R2019)

    Axes of Rotation: Methods for Specifying and Testing
    1/1/2010 - PDF DRM - English - ASME
    Learn More
    €40.00

  • DIN EN ISO 14691:2009-05

    Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691:2008), English version EN ISO 14691:2008
    5/1/2009 - PDF - English - DIN
    Learn More
    €104.95

  • JIS B 0904/AMENDMENT 1:2009 (R2013)

    Conical shaft ends for cone taper ratio 1:10 (Amendment 1)
    3/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1301/AMENDMENT 1:2009 (R2013)

    Keys and their corresponding keyways (Amendment 1)
    3/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 32712-1:2009-03

    Shaft to collar connection - Polygon profile P4C - Part 1: Generalities and geometry
    3/1/2009 - PDF - German - DIN
    Learn More
    €45.98

  • JIS B 1456/AMENDMENT 1:2009 (R2013)

    Roller chain shaft couplings (Amendment 1)
    2/20/2009 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 5480-16 Berichtigung 1:2009-01

    Involute splines based on reference diameters - Part 16: Tools, Corrigendum to DIN 5480-16:2006-03
    1/1/2009 - PDF - German - DIN
    Learn More
    €0.00

  • DIN 5480-16 Berichtigung 1:2009-01

    Involute splines based on reference diameters - Part 16: Tools, Corrigendum 1 to English version of DIN 5480-16:2006-03
    1/1/2009 - PDF - English - DIN
    Learn More
    €0.00

  • DIN 5480-15 Berichtigung 1:2009-01

    Involute splines based on reference diameters - Part 15: Inspection, Corrigendum to DIN 5480-15:2006-03
    1/1/2009 - PDF - German - DIN
    Learn More
    €0.00

  • DIN 5480-15 Berichtigung 1:2009-01

    Involute splines based on reference diameters - Part 15: Inspection, Corrigendum 1 to English version of DIN 5480-15:2006-03
    1/1/2009 - PDF - English - DIN
    Learn More
    €0.00

  • JIS B 8277:2008 (R2018)

    Expansion joint for pressure vessels
    12/1/2008 - PDF - English - JSA
    Learn More
    €124.00

  • JIS B 8277:2008 (R2013)

    Expansion joint for pressure vessels
    11/25/2008 - PDF - Japanese - JSA
    Learn More
    €50.18

  • DIN 69888:2008-09

    Requirements for balancing of rotating tool systems
    9/1/2008 - PDF - German - DIN
    Learn More
    €104.95

  • DIN 5480-1:2006-03

    Involute splines based on reference diameters - Part 1: Generalities
    3/1/2006 - PDF - German - DIN
    Learn More
    €72.80

  • DIN 5480-1:2006-03

    Involute splines based on reference diameters - Part 1: Generalities
    3/1/2006 - PDF - English - DIN
    Learn More
    €91.12

  • DIN 5480-15:2006-03

    Involute splines based on reference diameters - Part 15: Inspection
    3/1/2006 - PDF - German - DIN
    Learn More
    €92.62

  • DIN 5480-15:2006-03

    Involute splines based on reference diameters - Part 15: Inspection
    3/1/2006 - PDF - English - DIN
    Learn More
    €115.98

  • DIN 5480-16:2006-03

    Involute splines based on reference diameters - Part 16: Tools
    3/1/2006 - PDF - German - DIN
    Learn More
    €79.72

  • DIN 5480-16:2006-03

    Involute splines based on reference diameters - Part 16: Tools
    3/1/2006 - PDF - English - DIN
    Learn More
    €99.44

  • VDI 2722:2003-08 (R2014)

    Cardan shafts and cardan shaft lines - Homokinematic mechanisms
    8/1/2003 - PDF - English, German - VDI
    Learn More
    €128.38

  • ISO 14694:2003 (R2019)

    Industrial fans
    Specifications for balance quality and vibration levels
    4/14/2003 - Paper - French - ISO
    Learn More
    €199.00

  • ISO 14694:2003 (R2019)

    Industrial fans
    Specifications for balance quality and vibration levels
    4/14/2003 - Paper - English - ISO
    Learn More
    €199.00

  • JIS B 0903:2001 (R2015)

    Cylindrical shaft ends
    3/20/2001 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0904:2001 (R2005)

    Conical shaft ends for cone taper ratio 1:10
    3/20/2001 - PDF - Japanese - JSA
    Learn More
    €25.00

  • DIN 5466-1:2000-10

    Splined joints, calculation of load capacity - Part 1: General basis
    10/1/2000 - PDF - German - DIN
    Learn More
    €79.72

  • DIN ISO 10817-1:1999-11

    Rotating shaft vibration measuring systems - Part 1: Relative and absolute sensing of radial vibration (ISO 10817-1:1998)
    11/1/1999 - PDF - German - DIN
    Learn More
    €72.80

  • BS ISO 10817-1:1999

    Rotating shaft vibration measuring systems Relative and absolute sensing of radial
    6/15/1999 - PDF - English - BSI
    Learn More
    €250.00

  • DIN 3760:1996-09

    Rotary shaft lip type seals
    9/1/1996 - PDF - German - DIN
    Learn More
    €59.63

  • DIN 3760:1996-09

    Rotary shaft lip seals
    9/1/1996 - PDF - English - DIN
    Learn More
    €74.58

  • JIS B 1301:1996 (R2005)

    Keys and their corresponding keyways
    3/1/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1601:1996 (R2015)

    Straight-sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification
    1/1/1996 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 7737:1995 (R2015)

    Balancing machines
    4/1/1995 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1603:1995 (R2015)

    Straight cylindrical involute splines - side fit - Generalities, dimensions and inspection
    3/1/1995 - PDF - Japanese - JSA
    Learn More
    €132.34

  • JIS B 9220:1993 (R2013)

    Agricultural machinery - General requirement for safety
    8/1/1993 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 0006:1993 (R2013)

    Technical drawings - Representation of splines and serrations
    5/1/1993 - PDF - Japanese - JSA
    Learn More
    €25.00

  • BS 6186-1:Addendum No. 1:1993

    Specification for straight cylindrical involute splines: metric module, side fit Inspection
    3/15/1993 - PDF - English - BSI
    Learn More
    €449.00

  • JIS B 0905:1992 (R2016)

    Rotating machines - Balance quality requirements of rigid rotors
    7/1/1992 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1451:1991 (R2016)

    Rigid flanged shaft couplings
    12/1/1991 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1452:1991 (R2016)

    Flexible flanged shaft couplings
    12/1/1991 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF E22-179 (12/1991) (R2011)

    Mechanical transmissions. Woodruff keys. Dimensions and tolerances. - Transmissions mécaniques
    12/1/1991 - Paper - French - AFNOR
    Learn More
    €60.50

  • NF E22-182 (12/1991) (R2011)

    Mechanical transmissions. Tangential keys and keyways. Dimensions and tolerances. - Transmissions mécaniques
    12/1/1991 - Paper - French - AFNOR
    Learn More
    €60.67

  • E22-181 (12/1991) (R2011)

    Mechanical transmissions. Parallel keys fastened by screws. Dimensions. - Transmissions mécaniques
    12/1/1991 - Paper - French - AFNOR
    Learn More
    €48.00

  • JIS B 1456:1989 (R2005)

    Roller chain shaft couplings
    9/1/1989 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF R94-302 (09/1989) (R2014)

    Road vehicles. Fillets, chamfers and backing off. - Véhicules routiers
    9/1/1989 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF E22-622 (12/1988)

    Mechanical transmissions. Pressed-on assemblies on conical bearings. Function, realization, calculation. - Transmissions mécaniques
    12/1/1988 - Paper - French - AFNOR
    Learn More
    €60.67

  • NF E22-625 (12/1988)

    Mechanical transmissions. Concentric assemblies on cylindrical carried with intermediate bush with conical external surface. Calculation. - Transmissions mécaniques
    12/1/1988 - Paper - French - AFNOR
    Learn More
    €48.00

  • JIS B 1453:1988 (R2014)

    Geared type shaft couplings
    5/1/1988 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1454:1988 (R2014)

    Universal ball joints
    5/1/1988 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS B 1455:1988 (R2015)

    Rubber shaft couplings
    5/1/1988 - PDF - Japanese - JSA
    Learn More
    €25.00

  • NF L05-026 (05/1988) (R2008)

    Aerospace industry. ISO M and mj threads. Undercut relief and lead-in chamfers. - Industrie aérospatiale
    5/1/1988 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF E22-175 (11/1987) (R2012)

    Keying. Assembly by means of parrallel keys. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF E22-176 (11/1987) (R2012)

    Keying. Forced assembly by means of taper keys. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €48.00

  • NF E22-177 (11/1987) (R2012)

    Parallel keys. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €34.67

  • NF E22-178 (11/1987) (R2012)

    Taper keys forced assembly. Dimensions.
    11/1/1987 - Paper - French - AFNOR
    Learn More
    €34.67

  • JIS B 1351:1987 (R2013)

    Split pins
    10/1/1987 - PDF - Japanese - JSA
    Learn More
    €32.50

  • DIN 28135:1987-05

    Axial thrust washers for flange couplings of vertical shaft for agitators
    5/1/1987 - PDF - German - DIN
    Learn More
    €39.35

  • NF E22-610 (12/1986) (R2011)

    Mechanical transmissions. Coupling devices. Classification. Terminology. Graphical symbols.
    12/1/1986 - Paper - French - AFNOR
    Learn More
    €48.00

  • DIN ISO 14:1986-12

    Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982
    12/1/1986 - PDF - German - DIN
    Learn More
    €72.80

  • BS 5686:1986

    Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
    8/29/1986 - PDF - English - BSI
    Learn More
    €180.00

  • DIN 740-1:1986-08

    Power transmission engineering; flexible shaft couplings; technical delivery conditions
    8/1/1986 - PDF - German - DIN
    Learn More
    €72.80

  • DIN 740-1:1986-08

    Power transmission engineering; flexible shaft couplings; technical delivery conditions
    8/1/1986 - PDF - English - DIN
    Learn More
    €91.12

Items 1 to 200 of 297 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2