DIN EN ISO 20769-1:2018-12

DIN EN ISO 20769-1:2018-12

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018), German version EN ISO 20769-1:2018

Availability: In stock

€126.26

Details

This document specifies fundamental techniques of film and digital radiography with the object of enabling satisfactory and repeatable results to be obtained economically. The techniques are based on generally recognized practice and fundamental theory of the subject. This document applies to the radiographic examination of pipes in metallic materials for service induced flaws such as corrosion pitting, generalized corrosion and erosion. Besides its conventional meaning, 'pipe' as used in this standard should be understood to cover other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels. Weld inspection for typical welding process induced flaws is not covered, but weld inspection is included for corrosion/erosion type flaws. The pipes may be insulated or not, and can be assessed where loss of material due, for example, to corrosion or erosion is suspected either internally or externally. This document covers the tangential inspection technique for detection and through-wall sizing of wall loss, including: a) with the source on the pipe centre line, and b) with the source offset from it by the pipe radius. This document applies to tangential radiographic inspection using industrial radiographic film techniques, computed digital radiography (CR) and digital detector arrays (DDA).

Additional Info

Author Deutsche Institut für Normung e.V. (DIN)
Published by DIN
Document type Standard
ICS 19.100 : Non-destructive testing
23.040.01 : Pipeline components and pipelines in general
Number of pages 51
Replace DIN EN 16407-1(2014-04),DIN EN ISO 20769-1(2017-09)
Cross references EN ISO 20769-1 (2018-10), IDT,ISO 20769-1 (2018-09), IDT
Set MYSTD-20STD
Document history DIN EN ISO 20769-1 (2018-12),DIN EN ISO 20769-1 (2017-09),DIN EN 16407-1 (2014-04),DIN EN 16407-1 (2012-04)
Keyword DIN EN ISO 20769-1
Order form