NEWS
-
€88.44 -
€61.00 -
NASM 8906:2019
Bolt, Alloy Steel, Shear and Tensile (132 Ksi Min Fsu and 220 Ksi Min Ftu), 450F Spline Drive, General Specification for
12/27/2019 - PDF - English - NAS
Learn More€66.00 -
€52.80
-
ARINC Specification 653P1-5:2019
653P1-5 Avionics Application Software Standard Interface, Part 1, Required Services
12/23/2019 - PDF - English - ARINC
Learn More€266.96 -
ARINC Specification 653P2-4:2019
653P2-4 Avionics Application Software Standard Interface, Part 2, Extended Services
12/23/2019 - PDF - English - ARINC
Learn More€266.96 -
ARINC Characteristic 741P1-15:2019
741P1-15 Aviation Satellite Communication System, Part 1, Aircraft Installation Provisions
12/23/2019 - PDF - English - ARINC
Learn More€266.96 -
ARINC Characteristic 761-6:2019
761-6 Second Generation Aviation Satellite Communication Systems, Aircraft Installation Provisions
12/23/2019 - PDF - English - ARINC
Learn More€211.50 -
ASD-STAN prEN 4687:2019
Paints and varnishes — Chromate free (non corrosion inhibiting) two components cold curing primer — Chromate free primer for military application
12/20/2019 - PDF - English - ASD-STAN
Learn More€99.75 -
ASD-STAN prEN 4688:2019
Paints and varnishes — Corrosion resistant chromated two components cold curing epoxy primer —High corrosion resistance for military application
12/20/2019 - PDF - English - ASD-STAN
Learn More€99.75 -
SAE AMS 4432:2019-12-19
Aluminum Alloy, Plate (7160-T7451) 7.0Zn – 2.2Cu – 1.5Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
12/19/2019 - PDF - English - SAE
Learn More€77.00 -
€171.08
-
SAE AMS 2371L:2019-12-17
Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock
12/17/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 4274B:2019-12-17
Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O) Annealed, Fine Grain
12/17/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 5665P:2019-12-17
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe
12/17/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE AS 25043E:2019-12-17
COVER, ELECTRICAL AS50151 CONNECTOR, RECEPTACLE, AN TYPE
12/17/2019 - PDF - English - SAE
Learn More€77.00 -
ARINC Specification 818-3:2019
818-3 Avionics Digital Video Bus (ADVB) High Data Rate
12/16/2019 - PDF - English - ARINC
Learn More€211.50 -
SAE AMS 4143F:2019-12-16
Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated
12/16/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 4362H:2019-12-16
Forgings, Magnesium Alloy 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat Treated
12/16/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 7320G:2019-12-16
Rings, Sealing, Cast Leaded-Tin Bronze 80Cu - 16Sn - 5Pb As Cast
12/16/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 1732F:2019-12-16
BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE I
12/16/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 1733F:2019-12-16
BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
12/16/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE AMS 4920G:2019-12-13
Titanium Alloy, Forgings 6AI - 4V Alpha-Beta or Beta Processed, Annealed
12/13/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 5589G:2019-12-13
Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
12/13/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3130C:2019-12-13
PIN, EXPANSION - CRES, 303, LONG, UNS S30300 (Stabilized: Dec 2019)
12/13/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3131C:2019-12-11
PLUG, EXPANSION - CRES, 303, SHORT, STD AND .010 OVERSIZE DIAMETERS, UNS S30300 (Stabilized: Dec 2019)
12/11/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3132C:2019-12-11
PIN, EXPANSION - CRES, 303, SHORT, UNS S30300 (Stabilized: Dec 2019)
12/11/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 23053/2A:2019-12-10
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, SEMI RIGID, CROSSLINKED AND NON-CROSSLINKED
12/10/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3580A:2019-12-10
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, PD SHANK, UNS N07718 - 185 KSI
12/10/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 85049/4E:2019-12-10
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, SET-UP, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
12/10/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 85049/5D:2019-12-10
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL CABLE SEALING, STRAIGHT, STEP-DOWN, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
12/10/2019 - PDF - English - SAE
Learn More€77.00 -
SAE ARP 6621:2019-12-09
Predicting Photometric Degradation of Exterior Aircraft Lights
12/9/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 22520/19A:2019-12-09
CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (OUTER CONTACT) (Stabilized: Dec 2019)
12/9/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 22520/21A:2019-12-09
CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (OUTER CONTACT) (Stabilized: Dec 2019)
12/9/2019 - PDF - English - SAE
Learn More€77.00 -
NAS 516:2019
Fitting, Lubrication, .1250 Inch Drive, Flush Type
12/6/2019 - PDF sécurisé - English - NAS
Learn More€52.80 -
€77.00
-
SAE ARP 6336:2019-12-05
Lighting Applications for Unmanned Aircraft Systems (UAS)
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 22520/20A:2019-12-05
CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE) (Stabilized: Dec 2019)
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 22520/22A:2019-12-05
CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE) (Stabilized: Dec 2019)
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3153B:2019-12-05
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5625-18, UNJF-3A
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 39029/101B:2019-12-05
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-12883/44, MIL-DTL-12883/45, MIL-DTL-12883/46, AND MIL-DTL-12883/52 RELAY)
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 50861/1A:2019-12-05
WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, POLYAMIDE JACKET, TIN-COATED COPPER CONDUCTOR, 600-VOLT, 105 °C
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 50861/2A:2019-12-05
WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, PVC-GLASS-POLYAMIDE, TIN-COATED COPPER CONDUCTOR, 600-VOLT, 105 °C
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 50861/7A:2019-12-05
WIRE, ELECTRICAL, POLYVINYL CHLORIDE INSULATED, POLYAMIDE JACKET, TIN-COATED COPPER CONDUCTOR, MEDIUM WEIGHT, 600-VOLT, 105 °C
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 85049/3D:2019-12-05
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-DTL-22992 CONNECTORS, CLASSES C, J, AND R)
12/5/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 7271K:2019-12-03
Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 - 70 Type “A” Hardness For Seals in Fuel Systems
12/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE ARP 6883:2019-12-03
Guidelines for Writing IVHM Requirements for Aerospace Systems
12/3/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE AS 3150B:2019-12-03
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI .3750-24 UNJF-3A
12/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3151B:2019-12-03
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .4375-20 UNJF-3A
12/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3543B:2019-12-03
STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 KSI/1200 °F LIGHTWEIGHT, SELF-BROACHING KEYS
12/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AIR 6918:2019-12-02
Management of Change Considerations for Aero Gas Turbine Engine Lubricants Under AS5780
12/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 5915A:2019-12-02
Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B, Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated, Precipitation Heat Treatable
12/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 6400A:2019-12-02
Forgings, Steel For Aircraft/Aerospace Equipment (Stabilized: Dec 2019)
12/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3152B:2019-12-02
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5000-20 UNJF-3A
12/2/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE AS 6049B:2019-12-02
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS, PRECISION TYPE
12/2/2019 - PDF - English - SAE
Learn More€77.00 -
ASD-STAN prEN 4689:2019
Aerospace series-Paints and varnishes — Two components cold curing polyurethane finish — High flexibility and chemical agent resistance for military application
12/1/2019 - PDF - English - ASD-STAN
Learn More€99.75 -
ASD-STAN prEN 2755:2019
Aerospace series — Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner — Elevated load at ambient temperature — Technical specification
11/30/2019 - PDF - English - ASD-STAN
Learn More€199.50 -
ASD-STAN prEN 4613:2019
Aerospace series — Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series — Dimensions and loads — Inch series
11/30/2019 - PDF - English - ASD-STAN
Learn More€84.00 -
ASD-STAN prEN 4614:2019
Aerospace series — Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series — Dimensions and loads — Inch series
11/30/2019 - PDF - English - ASD-STAN
Learn More€84.00 -
ASD-STAN prEN 9721:2019
Aerospace series — General recommendation for the BIT Architecture in an integrated system
11/30/2019 - PDF - English - ASD-STAN
Learn More€262.50 -
€246.28
-
€485.10 -
SAE AMS 4901U:2019-10-04
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
10/4/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 60491/1:2019-10-03
SLEEVE, CHAFE-PROTECTION, WRAP-AROUND, SELF-CLOSING (-55 TO +200 °C)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 60491/2:2019-10-03
SLEEVE, CHAFE-PROTECTION, WRAP-AROUND, SELF-CLOSING (-55° TO +260°C)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE AS 60491/4:2019-10-03
SLEEVE, CHAFE-PROTECTION, HIGH ABRASION EXPANDABLE (-55 TO +200 °C)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
€77.00
-
SAE J 1746:2019-10-03
ISP-Vehicle Location Referencing Standard (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE J 2319:2019-10-03
Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE J 2375:2019-10-03
The Selection of Adhesives for the Attachment of Exterior Aftermarket Accessories (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
SAE J 2379:2019-10-03
Performance Engine Building Recommended Practices (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€77.00 -
€21.80 -
SAE AIR 4165B:2019-10-02
General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AIR 4487B:2019-10-02
Investigation of Silver-Plated Conductor Corrosion (Red Plague)
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AIR 6552/1:2019-10-02
Inline Optical Power Monitoring, Network End-to-End Data Link Evaluation System
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AIR 81E:2019-10-02
Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE J 138:2019-10-02
Film Analysis Guides for Dynamic Studies of Test Subjects (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE J 1663:2019-10-02
Truth-in-Labeling Standard for Navigation Map Databases (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE J 2066:2019-10-02
Filter and Filter Element for Hydraulic System(s) Used on Manufacturing and Assembly Equipment (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE J 931:2019-10-02
Hydraulic Fluid Power Circuit Filtration - Application and Methods
10/2/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 4095E:2019-10-01
Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31, Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351, Plate, Solution Heat Treated and Stress Relieved
10/1/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 8040C:2019-10-01
Heater and Accessories, Aircraft Internal Combustion Heat Exchanger Type
10/1/2019 - PDF - English - SAE
Learn More€77.00 -
€329.95 -
NAS 1670:2019
Fasteners - Blind, Internally Threaded, External Sleeve, General Purpose, Protruding Head Self-Locking
9/30/2019 - PDF sécurisé - English - NAS
Learn More€52.80 -
€52.80
-
ASD-STAN prEN 2213:2019
Aerospace series-Steel 15CrMoV6 (1.7334)-Air melted — Hardened and tempered - Bars De ≤ 16 mm— 980 MPa ≤Rm≤ 1 180 MPa
9/30/2019 - PDF - English - ASD-STAN
Learn More€68.25 -
ASD-STAN prEN 2252:2019
Aerospace series-Steel 15CrMoV6 (1.7334) 1 080 MPa ≤Rm≤ 1 250 MPa Forgings De≤ 100 mm
9/30/2019 - PDF - English - ASD-STAN
Learn More€68.25 -
ASD-STAN prEN 3523:2019
Aerospace series-Steel 15CrMoV6 (1.7334)-Air melted Hardened and tempered - Bar for machining De≤ 100 mm 1 080 MPa ≤Rm≤ 1 280 MPa
9/30/2019 - PDF - English - ASD-STAN
Learn More€68.25 -
ASD-STAN prEN 3524:2019
Aerospace series-Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Sheet and strip — 2 mm ≤ a ≤ 6 mm — 1 080 MPa ≤Rm≤ 1 280 MPa
9/30/2019 - PDF - English - ASD-STAN
Learn More€68.25 -
ASD-STAN prEN 3525:2019
Aerospace series - Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Plate — 6 mm ≤ a ≤ 20 mm — 1 080 MPa ≤ Rm≤ 1 280 MPa
9/30/2019 - PDF - English - ASD-STAN
Learn More€68.25 -
ASD-STAN prEN 3526:2019
Aerospace series - Steel 15CrMoV6 (1.7334) — Air melted — Hardened and tempered — Sheet and strip — 0,5 mm ≤ a ≤ 6 mm — 980 MPa ≤ Rm ≤ 1 180 MPa
9/30/2019 - PDF - English - ASD-STAN
Learn More€68.25 -
€25.40 -
€26.54 -
GMW 17062:2019
Polyamide 66 - 100% Post-Consumer Recycled Carpet Fiber, Mineral Filled/Glass Fiber Reinforced, Heat Stabilized
9/1/2019 - PDF - English - GM
Learn More€33.84 -
GMW 17077:2019
Rear Window and Quarter Window Vehicle Defrost Test Procedure
9/1/2019 - PDF - English - GM
Learn More€33.84 -
€329.95 -
€266.96
-
SAE AIR 5277B:2019-08-22
Aerospace Fluid Power - Waste Reduction Practices for Used Phosphate Ester Aviation Hydraulic Fluid (Stabilized: Aug 2019)
8/22/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AS 3530B:2019-08-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286 - 160 KSI
8/14/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
ASD-STAN prEN 3475-512:2019
Aerospace series - Cables, electrical, aircraft use — Test methods — Part 512: Flexure endurance
8/5/2019 - PDF - English - ASD-STAN
Learn More€66.95 -
ASD-STAN prEN 4496:2019
Aerospace series — Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating — Classification: 1 100 MPa (at ambient temperature)/315 °C
8/5/2019 - PDF - English - ASD-STAN
Learn More€84.00 -
NF EN 4611-002, L52-114-002 (08/2019)
Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 002 : généralités - Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 002 : Généralités
8/1/2019 - Paper - English, French - AFNOR
Learn More€42.83 -
ARINC Specification 653P0-2:2019
653P0-2 Avionics Application Software Standard Interface, Part 0, Overview of ARINC 653
8/1/2019 - PDF - English - ARINC
Learn More€171.08 -
ARINC Specification 653P5-1:2019
653P5-1 Avionics Application Software Standard Interface, Part 5, Core Software Recommended Capabilities
8/1/2019 - PDF - English - ARINC
Learn More€116.56 -
€116.56
-
€211.50
-
€171.08
-
ARINC Specification 840A:2019
840A Electronic Flight Bag (EFB) Application Control Interface (ACI) for Tablet Devices
8/1/2019 - PDF - English - ARINC
Learn More€171.08 -
SAE AMS 4122M:2019-08-01
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated
8/1/2019 - PDF - English - SAE
Learn More€77.00 -
SAE AMS 4186E:2019-08-01
Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated, or When Specified, Annealed (7075-O)
8/1/2019 - PDF - English - SAE
Learn More€77.00 -
€77.00
-
SAE AMS 6444N:2019-08-01
Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted
8/1/2019 - PDF - English - SAE
Learn More€77.00 -
€52.80
-
NASM 18064:2019
SETSCREW, HEXAGON SOCKET, CUP POINT, 250 °F, SELF-LOCKING ELEMENT, CRES, PASSIVATED
7/31/2019 - PDF sécurisé - English - NAS
Learn More€52.80 -
NASM 51958:2019
Screw, Machine-Pan Head, Cross Recessed, Corrosion Resisting Steel, Passivated, Unf-2A
7/31/2019 - PDF sécurisé - English - NAS
Learn More€52.80 -
€58.75 -
NF X50-144-1 (07/2019)
Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 1 : bases de la démarche pour la prise en compte de l'environnement général - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 1 : Bases de la démarche pour la prise en compte de l'environnement général
7/1/2019 - Paper - French - AFNOR
Learn More€67.38 -
NF X50-144-2 (07/2019)
Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 2 : guide de la démarche de personnalisation en environnement - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 2 : Guide de la démarche de personnalisation en environnement
7/1/2019 - Paper - French - AFNOR
Learn More€77.16 -
NF X50-144-5 (07/2019)
Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 5 : coefficient de garantie - Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 5 : Coefficient de garantie
7/1/2019 - Paper - French - AFNOR
Learn More€96.32 -
NF X50-144-6 (07/2019)
Démonstration de la tenue aux environnements - Conception et réalisation des essais en environnement - Partie 6 : facteur d'essai
7/1/2019 - Paper - French - AFNOR
Learn More€96.32 -
NASM 14182:2019
Nut, Self-Locking, Extended Washer, Round, Nickel Alloy 718, 220 Ksi Ftu,450 and 800F, Spine Drive
6/28/2019 - PDF sécurisé - English - NAS
Learn More€52.80 -
ASD-STAN prEN 3572:2019
Aerospace series — PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in titanium — Product standard
6/24/2019 - PDF - English - ASD-STAN
Learn More€84.00 -
ASD-STAN prEN 6057:2019
Aerospace series — Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank — Dimensions and loads, Inch series
6/24/2019 - PDF - English - ASD-STAN
Learn More€84.00 -
ASD-STAN prEN 6115:2019
Aerospace series — Bolt — Protruding head, Short thread — Inch series
6/20/2019 - PDF - English - ASD-STAN
Learn More€138.60 -
SAE AMS 4926P:2019-06-20
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
6/20/2019 - PDF - English - SAE
Learn More€77.00 -
€21.80 -
€77.00
-
SAE AS 21439D:2019-06-06
BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, INCH
6/6/2019 - PDF - English - SAE
Learn More€77.00 -
SAE MA 3330D:2019-06-03
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, DRY FILM LUBRICATED
6/3/2019 - PDF - English - SAE
Learn More€77.00 -
NF L17-144 (06/2019)
Série aérospatiale - Élastomères - Éthylène-propylène - Classe 44 - Caractéristiques - Série aérospatiale - Elastomères - Ethylène-propylène - Classe 44 - Caractéristiques
6/1/2019 - Paper - English, French - AFNOR
Learn More€42.83 -
ARINC Specification 664P1-2:2019
664P1-2 Aircraft Data Network, Part 1, Systems Concepts and Overview
6/1/2019 - PDF - English - ARINC
Learn More€171.08 -
€137.75 -
AD 2000-Merkblatt S 3/7:2019-05
General verification of stability for pressure vessels - Allowing for thermal stresses in heat exchangers with solid headers
5/1/2019 - - - VDTUV
Learn MoreFrom: €5.63 -
ASTM A20/A20M-19
Standard Specification for General Requirements for Steel Plates for Pressure Vessels
5/1/2019 - PDF - English - ASTM
Learn More€68.00 -
From: €85.63
-
€137.75 -
€22.38
