Industry
-
BS EN ISO 13338:2022 + Redline
Tracked Changes. Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
8/15/2022 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 13338:2022
Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
8/10/2022 - PDF - English - BSI
Learn More€180.00 -
BS 669-1:2022 + Redline
Tracked Changes. Flexible hoses, end fittings and sockets for gas burning appliances Strip-wound metallic flexible covers, domestic 1st, 2nd 3rd family gases. Specification
6/7/2022 - PDF - English - BSI
Learn More€326.00 -
BS EN 17124:2022 + Redline
Tracked Changes. Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
5/31/2022 - PDF - English - BSI
Learn More€382.00 -
BS EN 17124:2022
Hydrogen fuel. Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen. Proton exchange membrane (PEM) fuel cell applications for vehicles
5/24/2022 - PDF - English - BSI
Learn More€293.00 -
BS 669-1:2022
Flexible hoses, end fittings and sockets for gas burning appliances Strip-wound metallic flexible covers, domestic 1st, 2nd 3rd family gases. Specification
1/28/2022 - PDF - English - BSI
Learn More€250.00 -
€137.00
-
€331.00
-
BS ISO 6707-4:2021
Buildings and civil engineering works. Vocabulary Facility management terms
5/26/2021 - PDF - English - BSI
Learn More€293.00 -
21/30423738 DC:2021
BS ISO 199. Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
5/25/2021 - PDF - English - BSI
Learn More€24.00 -
21/30378338 DC:2021
BS ENISO 10360-11. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Part 11. CMSs using the principle of X-ray computed tomography (CT)
4/8/2021 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 22081:2021
Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
2/22/2021 - PDF - English - BSI
Learn More€250.00 -
BS EN 17533:2020
Gaseous hydrogen. Cylinders and tubes for stationary storage
11/17/2020 - PDF - English - BSI
Learn More€377.00 -
€348.00
-
BS EN ISO 25178-72:2017+A1:2020
Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
10/1/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 41014:2020
Facility management. Development of facility management strategy
9/30/2020 - PDF - English - BSI
Learn More€348.00 -
PD ISO/TR 23276:2020
Geometrical product specifications (GPS). Surface texture: Profile method. Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
8/24/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 13385-2:2020 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/3/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 13385-2:2020
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of calliper depth gauges
6/1/2020 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 16610-29:2020
Geometrical product specifications (GPS). Filtration Linear profile filters: Wavelets
4/28/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10360-5:2020
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Coordinate machines (CMMs) using single multiple stylus contacting probing discrete point and/or scanning mode
4/21/2020 - PDF - English - BSI
Learn More€348.00 -
€449.00
-
BS ISO 22734:2019
Hydrogen generators using water electrolysis. Industrial, commercial, and residential applications
4/20/2020 - PDF - English - BSI
Learn More€348.00 -
BS ISO 19880-5:2019
Gaseous hydrogen. Fuelling stations Dispenser hoses and hose assemblies
4/15/2020 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 17268:2020
Gaseous hydrogen land vehicle refuelling connection devices
4/14/2020 - PDF - English - BSI
Learn More€348.00 -
€250.00
-
BS EN ISO 16610-61:2015+A1:2020
Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
3/11/2020 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-71:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
2/27/2020 - PDF - English - BSI
Learn More€235.00 -
BS ISO 464:2015 + Redline
Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS ISO 16111:2018 + Redline
Tracked Changes. Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
2/26/2020 - PDF - English - BSI
Learn More€454.00 -
BS EN 13269:2016 + Redline
Tracked Changes. Maintenance. Guideline on preparation of maintenance contracts
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 17450-3:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts Toleranced features
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 3040:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
2/26/2020 - PDF - English - BSI
Learn More€382.00 -
BS ISO 8573-2:2018 + Redline
Tracked Changes. Compressed air. Contaminant measurement Oil aerosol content
2/25/2020 - PDF - English - BSI
Learn More€454.00 -
€492.00
-
BS EN 15628:2014 + Redline
Tracked Changes. Maintenance. Qualification of maintenance personnel
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN ISO 14405-1:2016 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
2/25/2020 - PDF - English - BSI
Learn More€454.00 -
BS EN ISO 14405-2:2019 + Redline
Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 1101:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/24/2020 - PDF - English - BSI
Learn More€586.00 -
BS EN ISO 14253-1:2017 + Redline
Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 5458:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
1/29/2020 - PDF - English - BSI
Learn More€454.00 -
BS EN ISO 14978:2018 + Redline
Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
11/27/2019 - PDF - English - BSI
Learn More€454.00 -
BS EN ISO 13385-1:2019
Geometrical product specifications (GPS). Dimensional measuring equipment Design and metrological characteristics of callipers
9/24/2019 - PDF - English - BSI
Learn More€250.00 -
BS ISO 21087:2019
Gas analysis. Analytical methods for hydrogen fuel. Proton exchange membrane (PEM) fuel cell applications for road vehicles
7/3/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-73:2019
Geometrical product specifications (GPS). Surface texture: Areal Terms and definitions for surface defects on material measures
6/18/2019 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 20170:2019
Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
5/22/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14978:2018
Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
3/21/2019 - PDF - English - BSI
Learn More€348.00 -
€293.00
-
BS EN ISO 14405-2:2019
Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear or angular sizes
1/28/2019 - PDF - English - BSI
Learn More€250.00 -
BS ISO 19882:2018
Gaseous hydrogen. Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers
11/30/2018 - PDF - English - BSI
Learn More€293.00 -
18/30368114 DC:2018
BS EN 15221-5. Facility Management Part 5. Guidance on processes
11/7/2018 - PDF - English - BSI
Learn More€24.00 -
18/30381025 DC:2018
BS EN 15221-3. Facility Management Part 3. Guidance on quality in
11/7/2018 - PDF - English - BSI
Learn More€24.00 -
18/30381028 DC:2018
BS EN 15221-6. Facility Management Part 6. Area and Space Measurement in
11/7/2018 - PDF - English - BSI
Learn More€24.00 -
18/30381031 DC:2018
BS EN 15221-4. Facility Management Part 4. Taxonomy, Classification and Structures in
11/7/2018 - PDF - English - BSI
Learn More€43.00 -
€348.00
-
BS 4272-4:2018
Anaesthetic and analgesic machines Specification for auxiliary gas outlets probes
8/30/2018 - PDF - English - BSI
Learn More€151.00 -
BS ISO 16111:2018
Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
8/22/2018 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 41012:2018
Facility management. Guidance on strategic sourcing and the development of agreements
7/6/2018 - PDF - English - BSI
Learn More€348.00 -
€293.00
-
BS EN ISO 5458:2018
Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
6/11/2018 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 41001:2018
Facility management. Management systems. Requirements with guidance for use
5/30/2018 - PDF - English - BSI
Learn More€350.00 -
PD ISO/TS 21619:2018
Geometrical product specifications (GPS). Types of documents with GPS
4/17/2018 - PDF - English - BSI
Learn More€180.00 -
BS ISO 8573-2:2018
Compressed air. Contaminant measurement Oil aerosol content
3/6/2018 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 17450-4:2018
Geometrical product specifications (GPS). Basic concepts characteristics for quantifying GPS deviations
2/20/2018 - PDF - English - BSI
Learn More€250.00 -
18/30295505 DC:2018
BS EN ISO 19884. Gaseous hydrogen. Cylinders and tubes for stationary storage
2/19/2018 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 14253-1:2017
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Decision rules for verifying conformity or nonconformity with
2/7/2018 - PDF - English - BSI
Learn More€250.00 -
€377.00
-
€377.00
-
BS EN ISO 25178-71:2017
Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
10/23/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 10156:2017
Gas cylinders. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
9/22/2017 - PDF - English - BSI
Learn More€293.00 -
17/30293124 DC:2017
BS ISO 19880-2. Gaseous hydrogen. Fueling stations. Part 2. Dispensers
7/10/2017 - PDF - English - BSI
Learn More€24.00 -
17/30358444 DC:2017
BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing Part 2. Dimensions other than linear sizes
6/16/2017 - PDF - English - BSI
Learn More€24.00 -
PD ISO/TS 19883:2017
Safety of pressure swing adsorption systems for hydrogen separation and purification
4/30/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 16610-30:2017
Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
4/30/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 9013:2017
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
2/28/2017 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 1938-2:2017
Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
2/28/2017 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 1101:2017
Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
2/28/2017 - PDF - English - BSI
Learn More€449.00 -
BS EN ISO 16610-28:2016
Geometrical product specifications (GPS). Filtration Profile filters: End effects
1/31/2017 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14405-3:2017
Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes
1/31/2017 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 16610-31:2016
Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
12/31/2016 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14405-1:2016
Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
9/30/2016 - PDF - English - BSI
Learn More€348.00 -
PD ISO/TS 17865:2016
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
9/30/2016 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 17450-3:2016
Geometrical product specifications (GPS). General concepts Toleranced features
7/31/2016 - PDF - English - BSI
Learn More€250.00 -
BS EN 13269:2016
Maintenance. Guideline on preparation of maintenance contracts
6/30/2016 - PDF - English - BSI
Learn More€250.00 -
16/30340661 DC:2016
BS EN 17007. Maintenance process and associated indicators
6/2/2016 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 3040:2016
Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
5/31/2016 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 25178-1:2016
Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
4/30/2016 - PDF - English - BSI
Learn More€293.00 -
16/30314605 DC:2016
BS EN ISO 5459. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
3/29/2016 - PDF - English - BSI
Learn More€43.00 -
€377.00
-
BS EN ISO 1938-1:2015
Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
11/30/2015 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 16610-60:2015
Geometrical Product Specification (GPS). Filtration Linear areal filters: Basic concepts
11/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS ISO 464:2015
Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
11/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 463:2006
Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
10/31/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 13225:2012
Geometrical product specifications (GPS). Dimensional measuring equipment, Height gauges. Design and metrological characteristics
10/31/2015 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 9493:2010
Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
10/31/2015 - PDF - English - BSI
Learn More€250.00 -
15/30274539 DC:2015
BS ISO 18480-2. Facilities Management. Part 2. Guidance on strategic sourcing and the development of agreements
10/26/2015 - PDF - English - BSI
Learn More€24.00 -
15/30274542 DC:2015
BS ISO 18480-1. Facility management. Part 1. Terms and definitions
10/26/2015 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 14253-5:2015
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing indicating instruments
9/30/2015 - PDF - English - BSI
Learn More€250.00 -
PD CEN ISO/TS 8062-2:2013
Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
9/30/2015 - PDF - English - BSI
Learn More€348.00 -
BS 8618:2015
Granular carbon dioxide (CO2) absorbent material for life support, diving, hyper- and hypobaric applications. Specification
7/31/2015 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 16610-22:2015
Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters
7/31/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-606:2015
Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
6/30/2015 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 16610-40:2015
Geometrical product specifications (GPS). Filtration Morphological profile filters: Basic concepts
6/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 16610-41:2015
Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
6/30/2015 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 16610-49:2015
Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques
6/30/2015 - PDF - English - BSI
Learn More€250.00 -
€293.00
-
BS EN ISO 16610-1:2015
Geometrical product specifications (GPS). Filtration Overview and basic concepts
4/30/2015 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 16610-20:2015
Geometrical product specifications (GPS). Filtration Linear profile filters: Basic concepts
4/30/2015 - PDF - English - BSI
Learn More€250.00 -
€250.00
-
BS EN ISO 2538-1:2014
Geometrical product specifications (GPS). Wedges Series of angles and slopes
9/30/2014 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 2538-2:2014
Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
9/30/2014 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 16610-71:2014
Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
9/30/2014 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-70:2014
Geometrical product specification (GPS). Surface texture: Areal Material measures
2/28/2014 - PDF - English - BSI
Learn More€331.00 -
BS EN ISO 25178-605:2014
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments
1/31/2014 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 10360-8:2013
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors
12/31/2013 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 10360-9:2013
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing
12/31/2013 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-603:2013
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
10/31/2013 - PDF - English - BSI
Learn More€293.00 -
PD CEN ISO/TS 15530-1:2013
Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
9/30/2013 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10579:2013
Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
9/30/2013 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 25178-604:2013
Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
8/31/2013 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 14253-2:2011
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation uncertainty in GPS measurement, calibration verification
8/31/2013 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 286-2:2010
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations holes shafts
8/31/2013 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 286-1:2010
Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
8/31/2013 - PDF - English - BSI
Learn More€331.00 -
PD ISO/TS 17863:2013
Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
6/30/2013 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 16610-85:2013
Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
5/31/2013 - PDF - English - BSI
Learn More€293.00 -
13/30272930 DC:2013
BS EN ISO 4287 AMD2. Geometrical Product Specifications (GPS). Surface texture: Profile method. Terms, definitions and surface texture parameters
4/15/2013 - PDF - English - BSI
Learn More€24.00 -
13/30273328 DC:2013
BS ISO 16610-32. Geometrical product specifications (GPS). Filtration. Part 32. Robust profile filters: Spline filters
1/14/2013 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 17450-2:2012
Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
10/31/2012 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 5436-2:2012
Geometrical product specifications (GPS). Surface texture: Profile method, Measurement standards Software measurement
10/31/2012 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 13102:2012
Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
9/30/2012 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 16610-21:2012
Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters
8/31/2012 - PDF - English - BSI
Learn More€293.00 -
12/3025963 DC:2012
BS ISO 15399. Gaseous hydrogen. Cylinders and tubes for stationary storage
8/30/2012 - PDF - English - BSI
Learn More€24.00 -
12/30262704 DC:2012
BS EN ISO 3040 AMD1. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
8/13/2012 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 25178-3:2012
Geometrical product specifications (GPS). Surface texture: Areal Specification operators
7/31/2012 - PDF - English - BSI
Learn More€250.00 -
12/30242157 DC:2012
BS EN ISO 14253-1 AMD1. Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformance or non-conformance with specifications
2/6/2012 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 17450-1:2011
Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
1/31/2012 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 1119:2011
Geometrical product specifications (GPS). Series of conical tapers and taper angles
1/31/2012 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 22432:2011
Geometrical product specifications (GPS). Features utilized in specification and verification
12/31/2011 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 15530-3:2011
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use calibrated workpieces or standards
10/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 8015:2011
Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
9/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN 15331:2011
Criteria for design, management and control of maintenance services for buildings
8/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 5459:2011
Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
8/31/2011 - PDF - English - BSI
Learn More€377.00 -
BS EN ISO 10360-7:2011
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems
6/30/2011 - PDF - English - BSI
Learn More€331.00 -
BS EN ISO 25378:2011
Geometrical product specifications (GPS). Characteristics and conditions. Definitions
5/31/2011 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 12180-1:2011
Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14253-3:2011
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on uncertainty statements
5/31/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 12180-2:2011
Geometrical product specifications (GPS). Cylindricity Specification operators
4/30/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 12181-1:2011
Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
4/30/2011 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 12181-2:2011
Geometrical product specifications (GPS). Roundness Specification operators
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12780-1:2011
Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12780-2:2011
Geometrical product specifications (GPS). Straightness Specification operators
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12781-1:2011
Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
4/30/2011 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 12781-2:2011
Geometrical product specifications (GPS). Flatness Specification operators
4/30/2011 - PDF - English - BSI
Learn More€250.00 -
€250.00
-
BS EN ISO 25178-601:2010
Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments
7/31/2010 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-602:2010
Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments
7/31/2010 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 25178-701:2010
Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments
7/31/2010 - PDF - English - BSI
Learn More€293.00 -
€180.00
-
€293.00
-
€151.00
-
DD CEN ISO/TS 14253-4:2010
Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Background on functional limits specification in decision rules
6/30/2010 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 25178-6:2010
Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture
5/31/2010 - PDF - English - BSI
Learn More€180.00 -
BS ISO 16110-2:2010
Hydrogen generators using fuel processing technologies Test methods for performance
3/31/2010 - PDF - English - BSI
Learn More€331.00 -
€250.00
-
BS EN ISO 10360-2:2009
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used linear dimensions
1/31/2010 - PDF - English - BSI
Learn More€293.00 -
€348.00
-
BS EN ISO 12085:1997
Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters
7/31/2009 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 10135:2009
Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
5/31/2009 - PDF - English - BSI
Learn More€348.00 -
DD ISO/TS 15530-4:2008
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific using simulation
11/30/2008 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 10360-6:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
7/31/2008 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14175:2008
Welding consumables. Gases and gas mixtures for fusion welding and allied processes
3/31/2008 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8062-1:2007
Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Vocabulary
10/31/2007 - PDF - English - BSI
Learn More€293.00 -
DD ISO/TS 23165:2006
Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
9/28/2007 - PDF - English - BSI
Learn More€293.00 -
€180.00
-
€180.00
-
€250.00
-
BS ISO 16110-1:2007
Hydrogen generators using fuel processing technologies Safety
6/29/2007 - PDF - English - BSI
Learn More€377.00 -
BS EN 61108-4:2004
Marine navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Shipborne DGPS DGLONASS maritime radio beacon receiver equipment. Performance requirements, methods of testing required test results
12/13/2004 - PDF - English - BSI
Learn More€293.00 -
€180.00
-
BS ISO 8573-8:2004
Compressed air Test methods for solid particle content by mass concentration
6/17/2004 - PDF - English - BSI
Learn More€180.00 -
BS EN 61108-1:2003
Global navigation satellite systems (GNSS) positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test results
11/14/2003 - PDF - English - BSI
Learn More€250.00 -
BS ISO 8573-7:2003
Compressed air Test method for viable microbiological contaminant content
6/25/2003 - PDF - English - BSI
Learn More€180.00 -
BS ISO 8573-6:2003
Compressed air Test methods for gaseous contaminant content
6/16/2003 - PDF - English - BSI
Learn More€180.00 -
BS ISO 8573-5:2001
Compressed air Test methods for oil vapour and organic solvent content
3/1/2002 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 10360-3:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of rotary table as fourth
10/15/2001 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 10360-1:2001
Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
10/15/2001 - PDF - English - BSI
Learn More€348.00 -
BS EN ISO 5436-1:2001
Geometrical Product Specifications (GPS). Surface texture: Profile method, Measurement standards Geometric product specifications texture. method calibration.
8/23/2001 - PDF - English - BSI
Learn More€250.00 -
BS EN 13549:2001
Cleaning services. Basic requirements and recommendations for quality measuring systems
7/15/2001 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 14660-1:2000
Geometrical product specifications (GPS). features General terms and definitions
7/15/2000 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 8785:1999
Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
10/15/1999 - PDF - English - BSI
Learn More€250.00 -
BS EN 720-1:1999
Transportable gas cylinders. Gases and mixtures Properties of pure gases
8/15/1999 - PDF - English - BSI
Learn More€151.00 -
€180.00
-
BS EN ISO 3650:1999
Geometrical product specifications (GPS). Length standards. Gauge blocks
5/15/1999 - PDF - English - BSI
Learn More€250.00 -
BS EN ISO 3274:1998
Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
5/15/1997 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 13565-1:1998
Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
5/15/1997 - PDF - English - BSI
Learn More€180.00 -
€151.00
-
€151.00
-
€250.00
-
BS 4431:1989
Methods of sampling and test for liquefied anhydrous ammonia
6/30/1989 - PDF - English - BSI
Learn More€180.00